google/snow: enable GPIO entries and CHROMEOS in building
These were not separable or it would have been two CLs.
Enable CHROMEOS configure option on snow. Write gpio support code for
the mainboard. Right now the GPIO just returns hard-wired values for
"virtual" GPIOs.
Add a chromeos.c file for snow, needed to build.
This is tested and creates gpio table entries that our hardware can use.
Lots still missing but we can now start to fill in the blanks, since
we have enabled CHROMEOS for this board. We are getting further into
the process of actually booting a real kernel.
Change-Id: I5fdc68b0b76f9b2172271e991e11bef16f5adb27
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2467
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/mainboard/google/snow/chromeos.c b/src/mainboard/google/snow/chromeos.c
new file mode 100644
index 0000000..5f8e631
--- /dev/null
+++ b/src/mainboard/google/snow/chromeos.c
@@ -0,0 +1,98 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <arch/io.h>
+
+#include <device/device.h>
+
+#define ACTIVE_LOW 0
+#define ACTIVE_HIGH 1
+#define WP_GPIO 6
+#define DEVMODE_GPIO 54
+#define FORCE_RECOVERY_MODE 0
+#define FORCE_DEVELOPER_MODE 0
+
+#include <boot/coreboot_tables.h>
+#include <arch/coreboot_tables.h>
+
+#define GPIO_COUNT 4
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+
+ gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio));
+ gpios->count = GPIO_COUNT;
+
+ /* Write Protect: virtual GPIO active Low */
+ gpios->gpios[0].port = -1;
+ gpios->gpios[0].polarity = ACTIVE_LOW;
+ gpios->gpios[0].value = 1;
+ strncpy((char *)gpios->gpios[0].name,"write protect",
+ GPIO_MAX_NAME_LENGTH);
+
+ /* Recovery: virtual GPIO active high */
+ gpios->gpios[1].port = -1;
+ gpios->gpios[1].polarity = ACTIVE_HIGH;
+ gpios->gpios[1].value = 0;
+ strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH);
+
+ /* Developer: virtual GPIO active high */
+ gpios->gpios[2].port = -1;
+ gpios->gpios[2].polarity = ACTIVE_HIGH;
+ gpios->gpios[2].value = 1;
+ strncpy((char *)gpios->gpios[2].name,"developer",
+ GPIO_MAX_NAME_LENGTH);
+
+ /* Was VGA Option ROM loaded? */
+ gpios->gpios[3].port = -1; /* Indicate that this is a pseudo GPIO */
+ gpios->gpios[3].polarity = ACTIVE_HIGH;
+ gpios->gpios[3].value = 0;
+ strncpy((char *)gpios->gpios[3].name,"oprom", GPIO_MAX_NAME_LENGTH);
+
+ printk(BIOS_ERR, "Added %d GPIOS size %d\n", GPIO_COUNT, gpios->size);
+
+}
+
+int get_developer_mode_switch(void)
+{
+ int dev_mode = 0;
+
+ printk(BIOS_DEBUG,"FORCING DEVELOPER MODE.\n");
+
+ dev_mode = 1;
+ printk(BIOS_DEBUG,"DEVELOPER MODE FROM GPIO %d: %x\n",DEVMODE_GPIO,
+ dev_mode);
+
+ return dev_mode;
+}
+
+int get_recovery_mode_switch(void)
+{
+ int ec_rec_mode = 0;
+
+ return ec_rec_mode;
+}
+
+int get_recovery_mode_from_vbnv(void)
+{
+ return 1;
+}