purism/librem_skl: Add AC/DC LoadLine to VR Config
The FSP 2.0 needs to set the ac_loadline and dc_loadline for
each VR config. Without it, the Loadline is considered to be
0 mOhm and this causes CPU temp to jump all over the place
whenever the CPU is used.
This is necessary since there are no VR_CONFIG icc mappings for
Skylake SKUs, only KabyLake.
These values were copied from the Google Poppy devicetree.
Change-Id: I6aeb6ee521988b94f2ae94a60d1a28b87ba984d4
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/25324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb
index 3d63f90..1351741 100644
--- a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb
+++ b/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb
@@ -31,8 +31,8 @@
# Enable "Intel Speed Shift Technology"
register "speed_shift_enable" = "1"
- # Enable DPTF
- register "dptf_enable" = "1"
+ # Disable DPTF
+ register "dptf_enable" = "0"
# FSP Configuration
register "ProbelessTrace" = "0"
@@ -81,19 +81,21 @@
register "pirqh_routing" = "PCH_IRQ11"
# VR Settings Configuration for 4 Domains
- #+----------------+-------+-------+-------------+-------+
- #| Domain/Setting | SA | IA | GT Unsliced | GT |
- #+----------------+-------+-------+-------------+-------+
- #| Psi1Threshold | 20A | 20A | 20A | 20A |
- #| Psi2Threshold | 4A | 5A | 5A | 5A |
- #| Psi3Threshold | 1A | 1A | 1A | 1A |
- #| Psi3Enable | 1 | 1 | 1 | 1 |
- #| Psi4Enable | 1 | 1 | 1 | 1 |
- #| ImonSlope | 0 | 0 | 0 | 0 |
- #| ImonOffset | 0 | 0 | 0 | 0 |
- #| IccMax | 7A | 34A | 35A | 35A |
- #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
- #+----------------+-------+-------+-------------+-------+
+ #+----------------+-----------+-----------+-------------+----------+
+ #| Domain/Setting | SA | IA | GT Unsliced | GT |
+ #+----------------+-----------+-----------+-------------+----------+
+ #| Psi1Threshold | 20A | 20A | 20A | 20A |
+ #| Psi2Threshold | 4A | 5A | 5A | 5A |
+ #| Psi3Threshold | 1A | 1A | 1A | 1A |
+ #| Psi3Enable | 1 | 1 | 1 | 1 |
+ #| Psi4Enable | 1 | 1 | 1 | 1 |
+ #| ImonSlope | 0 | 0 | 0 | 0 |
+ #| ImonOffset | 0 | 0 | 0 | 0 |
+ #| IccMax | 7A | 34A | 35A | 35A |
+ #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+ #| AC LoadLine | 15 mOhm | 5.7 mOhm | 5.2 mOhm | 5.2 mOhm |
+ #| DC LoadLine | 14.3 mOhm | 4.83 mOhm | 4.2 mOhm | 4.2 mOhm |
+ #+----------------+-----------+-----------+-------------+----------+
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
@@ -105,6 +107,8 @@
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(7),
.voltage_limit = 1520,
+ .ac_loadline = 1500,
+ .dc_loadline = 1430,
}"
register "domain_vr_config[VR_IA_CORE]" = "{
@@ -118,6 +122,8 @@
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(34),
.voltage_limit = 1520,
+ .ac_loadline = 570,
+ .dc_loadline = 483,
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
@@ -131,6 +137,8 @@
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
+ .ac_loadline = 520,
+ .dc_loadline = 420,
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
@@ -144,6 +152,8 @@
.imon_offset = 0x0,
.icc_max = VR_CFG_AMP(35),
.voltage_limit = 1520,
+ .ac_loadline = 520,
+ .dc_loadline = 420,
}"
# Enable Root Ports 5 and 9