configs: Add a weird config for Asus P8Z77-V LX2
This is not meant for actual use, but to build-test several options.
Please do not try to use it on real hardware. Or maybe do try.
The purpose of this config is to build-test the individual options, not
their combination. So, for instance, if it would be hard to keep options
x, y and z build together in the future, this config shouldn't block a
change but should instead be adapted, e.g. split into multiple chunks.
Change-Id: I80e8fe3982025b61148e7c2b05dd0727d65ee2f4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/configs/config.asus_p8z77-v_lx2.debug_smmstore_hotplug_yabel_em100 b/configs/config.asus_p8z77-v_lx2.debug_smmstore_hotplug_yabel_em100
new file mode 100644
index 0000000..167909d
--- /dev/null
+++ b/configs/config.asus_p8z77-v_lx2.debug_smmstore_hotplug_yabel_em100
@@ -0,0 +1,38 @@
+# Not meant for actual use, but rather to build-test individual options.
+# If keeping this combination of options buildable becomes too hard in
+# the future, then this config can be split into several smaller chunks.
+# Exercises, among other things:
+# + PCIe hotplug
+# + Fatal assertions
+# + Debug options
+# + SMMSTORE
+# + YABEL
+# + VESA framebuffer
+# + EM100 support
+CONFIG_VENDOR_ASUS=y
+CONFIG_CBFS_SIZE=0x200000
+CONFIG_BOARD_ASUS_P8Z77_V_LX2=y
+CONFIG_PCIEXP_L1_SUB_STATE=y
+CONFIG_PCIEXP_CLK_PM=y
+# CONFIG_S3_VGA_ROM_RUN is not set
+CONFIG_NATIVE_RAMINIT_IGNORE_MAX_MEM_FUSES=y
+CONFIG_NATIVE_RAMINIT_IGNORE_XMP_MAX_DIMMS=y
+CONFIG_RAMINIT_ALWAYS_ALLOW_DLL_OFF=y
+CONFIG_VGA_ROM_RUN=y
+CONFIG_PCI_OPTION_ROM_RUN_YABEL=y
+CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
+CONFIG_VBE_LINEAR_FRAMEBUFFER=y
+CONFIG_PCIEXP_HOTPLUG=y
+CONFIG_SMMSTORE=y
+CONFIG_FATAL_ASSERTS=y
+CONFIG_DEBUG_CBFS=y
+CONFIG_DEBUG_RAM_SETUP=y
+CONFIG_DEBUG_SMBUS=y
+CONFIG_DEBUG_SMI=y
+CONFIG_DEBUG_MALLOC=y
+CONFIG_DEBUG_CONSOLE_INIT=y
+CONFIG_DEBUG_SPI_FLASH=y
+CONFIG_DEBUG_BOOT_STATE=y
+CONFIG_DEBUG_ADA_CODE=y
+CONFIG_HAVE_EM100_SUPPORT=y
+CONFIG_EM100=y