Kconfig: Update default hex values to start with 0x
Kconfig hex values don't need to be in quotes, and should start with
'0x'. If the default value isn't set this way, Kconfig will add the
0x to the start, and the entry can be added unnecessarily to the
defconfig since it's "different" than what was set by the default.
A check for this has been added to the Kconfig lint tool.
Change-Id: I86f37340682771700011b6285e4b4af41b7e9968
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16834
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
diff --git a/src/southbridge/amd/cimx/sb800/Kconfig b/src/southbridge/amd/cimx/sb800/Kconfig
index 5748f79..a48b93a 100644
--- a/src/southbridge/amd/cimx/sb800/Kconfig
+++ b/src/southbridge/amd/cimx/sb800/Kconfig
@@ -39,8 +39,8 @@
config IDE_COMBINED_MODE
hex
- default "0x0" if ENABLE_IDE_COMBINED_MODE
- default "0x1" if !ENABLE_IDE_COMBINED_MODE
+ default 0x0 if ENABLE_IDE_COMBINED_MODE
+ default 0x1 if !ENABLE_IDE_COMBINED_MODE
choice
prompt "SATA Mode"
@@ -70,9 +70,9 @@
config SB800_SATA_MODE
hex
depends on (SB800_SATA_IDE || SB800_SATA_RAID || SB800_SATA_AHCI)
- default "0x0" if SB800_SATA_IDE
- default "0x1" if SB800_SATA_RAID
- default "0x2" if SB800_SATA_AHCI
+ default 0x0 if SB800_SATA_IDE
+ default 0x1 if SB800_SATA_RAID
+ default 0x2 if SB800_SATA_AHCI
config SB_SUPERIO_HWM
bool