util/superiotool: Add initial support for Exar XR28V384.
Datasheet
https://www.exar.com/content/document.ashx?id=21368
Add support for Exar chip used on a custom board
that was designed to connect to the Olive Hill Plus
development platform. The register dump was verified
on the Olive Hill Plus platform.
Change-Id: Ibd3e13eefb706bd99b6e5b38634f6855b39848ab
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/14367
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/util/superiotool/Makefile b/util/superiotool/Makefile
index 1cd098f..f6d9685 100644
--- a/util/superiotool/Makefile
+++ b/util/superiotool/Makefile
@@ -28,8 +28,8 @@
-Werror-implicit-function-declaration -ansi -pedantic $(VERSION)
LDFLAGS += -lz
-OBJS = superiotool.o serverengines.o ali.o fintek.o ite.o nsc.o nuvoton.o \
- smsc.o winbond.o infineon.o
+OBJS = superiotool.o serverengines.o ali.o exar.o fintek.o ite.o nsc.o \
+ nuvoton.o smsc.o winbond.o infineon.o
OS_ARCH = $(shell uname)
ifeq ($(OS_ARCH), Darwin)
diff --git a/util/superiotool/exar.c b/util/superiotool/exar.c
new file mode 100644
index 0000000..8b3c085
--- /dev/null
+++ b/util/superiotool/exar.c
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the superiotool project.
+ *
+ * Copyright (C) 2016 Derek Waldner
+ * Copyright (C) 2016 Sencore Inc <opensource@sencore.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "superiotool.h"
+
+#define DEVICE_ID_BYTE1_REG 0x20
+#define DEVICE_ID_BYTE2_REG 0x21
+
+#define VENDOR_ID_BYTE1_REG 0x23
+#define VENDOR_ID_BYTE2_REG 0x24
+
+#define EXAR_VENDOR_ID 0xa813
+
+static const struct superio_registers reg_table[] = {
+ {0x8403, "XR28V384", {
+ /* We assume reserved bits are read as 0. */
+ {NOLDN, NULL,
+ {0x02,0x07,0x20,0x21,0x23,0x24,0x25,0x26,0x27,EOT},
+ {0x00,0x00,0x03,0x84,0x13,0xa8,0x00,0x00,0x00,EOT}},
+ {0x0, "COM1",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf4,0xf5,0xf6,EOT},
+ {0x01,0x03,0xf8,0x03,0x00,0x44,0x00,0x00,0x00,EOT}},
+ {0x1, "COM2",
+ {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,0xf6,EOT},
+ {0x01,0x02,0xf8,0x04,0x00,0x00,0x00,0x00,EOT}},
+ {0x2, "COM3",
+ {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,0xf6,EOT},
+ {0x01,0x03,0xe8,0x05,0x00,0x00,0x00,0x00,EOT}},
+ {0x3, "COM4",
+ {0x30,0x60,0x61,0x70,0xf0,0xf4,0xf5,0xf6,EOT},
+ {0x01,0x02,0xe8,0x09,0x00,0x00,0x00,0x00,EOT}},
+ {0x8, "WDT",
+ {0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+ {0x01,0x04,0x42,0x00,0x02,0x0a,EOT}},
+ {EOT}}},
+ {EOT}
+};
+
+void enter_conf_mode_exar(uint16_t port)
+{
+ OUTB(0x67, port);
+ OUTB(0x67, port);
+}
+
+void exit_conf_mode_exar(uint16_t port)
+{
+ OUTB(0xaa, port);
+}
+
+void probe_idregs_exar(uint16_t port)
+{
+ uint16_t vid, did;
+
+ probing_for("Exar", "", port);
+
+ enter_conf_mode_exar(port);
+
+ did = regval(port, DEVICE_ID_BYTE1_REG);
+ did |= (regval(port, DEVICE_ID_BYTE2_REG) << 8);
+
+ vid = regval(port, VENDOR_ID_BYTE1_REG);
+ vid |= (regval(port, VENDOR_ID_BYTE2_REG) << 8);
+
+ if (vid != EXAR_VENDOR_ID || superio_unknown(reg_table, did)) {
+ if (verbose)
+ printf(NOTFOUND "vid=0x%04x, id=0x%04x\n", vid, did);
+ exit_conf_mode_exar(port);
+ return;
+ }
+
+ printf("Found Exar %s (vid=0x%04x, id=0x%04x) at 0x%x\n",
+ get_superio_name(reg_table, did), vid, did, port);
+ chip_found = 1;
+
+ dump_superio("Exar", reg_table, port, did, LDN_SEL);
+
+ exit_conf_mode_exar(port);
+}
+
+void print_exar_chips(void)
+{
+ print_vendor_chips("Exar", reg_table);
+}
diff --git a/util/superiotool/superiotool.h b/util/superiotool/superiotool.h
index 443cc07..93ff8e2 100644
--- a/util/superiotool/superiotool.h
+++ b/util/superiotool/superiotool.h
@@ -191,6 +191,10 @@
void probe_idregs_serverengines(uint16_t port);
void print_serverengines_chips(void);
+/* exar.c */
+void probe_idregs_exar(uint16_t port);
+void print_exar_chips(void);
+
/* fintek.c */
void probe_idregs_fintek(uint16_t port);
void probe_idregs_fintek_alternative(uint16_t port);
@@ -232,6 +236,7 @@
int ports[MAXNUMPORTS]; /* Signed, as we need EOT. */
} superio_ports_table[] = {
{probe_idregs_ali, {0x3f0, 0x370, EOT}},
+ {probe_idregs_exar, {0x2e, 0x4e, EOT}},
{probe_idregs_fintek, {0x2e, 0x4e, EOT}},
{probe_idregs_fintek_alternative, {0x2e, 0x4e, EOT}},
/* Only use 0x370 for ITE, but 0x3f0 or 0x3bd would also be valid. */
@@ -256,6 +261,7 @@
void (*print_list) (void);
} vendor_print_functions[] = {
{print_ali_chips},
+ {print_exar_chips},
{print_fintek_chips},
{print_ite_chips},
{print_nsc_chips},