nb/intel/gm45: Use a common romstage
This moves a lot of the common romstage boilerplate code to a common
location, while adding a few mainboard specific hooks.
Another difference is that the settings for enable_igd and enable_peg
are now based on the static devicetree settings.
Change-Id: I30ef7f6962aabde78b5c40e0b53bb85e01c254c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
diff --git a/src/northbridge/intel/gm45/Makefile.inc b/src/northbridge/intel/gm45/Makefile.inc
index 95b360c..16a9ddb 100644
--- a/src/northbridge/intel/gm45/Makefile.inc
+++ b/src/northbridge/intel/gm45/Makefile.inc
@@ -27,6 +27,7 @@
romstage-y += pm.c
romstage-y += ram_calc.c
romstage-y += iommu.c
+romstage-y += romstage.c
ramstage-y += acpi.c
diff --git a/src/northbridge/intel/gm45/gm45.h b/src/northbridge/intel/gm45/gm45.h
index 736d6af..0096793 100644
--- a/src/northbridge/intel/gm45/gm45.h
+++ b/src/northbridge/intel/gm45/gm45.h
@@ -436,6 +436,13 @@
void init_iommu(void);
+/* romstage mainboard hookups */
+void mb_setup_lpc(void);
+void mb_setup_superio(void); /* optional */
+void get_mb_spd_addrmap(u8 spd_addrmap[4]);
+void mb_pre_raminit_setup(sysinfo_t *); /* optional */
+void mb_post_raminit_setup(void); /* optional */
+
struct blc_pwm_t {
char ascii_string[13];
int pwm_freq; /* In Hz */
diff --git a/src/northbridge/intel/gm45/romstage.c b/src/northbridge/intel/gm45/romstage.c
new file mode 100644
index 0000000..6d652bb
--- /dev/null
+++ b/src/northbridge/intel/gm45/romstage.c
@@ -0,0 +1,135 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <cbmem.h>
+#include <romstage_handoff.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/acpi.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/bist.h>
+#include <cpu/intel/romstage.h>
+#include <northbridge/intel/gm45/gm45.h>
+#include <southbridge/intel/i82801ix/i82801ix.h>
+#include <southbridge/intel/common/gpio.h>
+
+#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+#define MCH_DEV PCI_DEV(0, 0, 0)
+
+void __weak mb_setup_superio(void)
+{
+}
+
+void __weak mb_pre_raminit_setup(sysinfo_t *sysinfo)
+{
+}
+
+void __weak mb_post_raminit_setup(void)
+{
+}
+
+/* Platform has no romstage entry point under mainboard directory,
+ * so this one is named with prefix mainboard.
+ */
+void mainboard_romstage_entry(unsigned long bist)
+{
+ sysinfo_t sysinfo;
+ int s3resume = 0;
+ int cbmem_initted;
+ u16 reg16;
+
+ /* basic northbridge setup, including MMCONF BAR */
+ gm45_early_init();
+
+ if (bist == 0)
+ enable_lapic();
+
+ /* First, run everything needed for console output. */
+ i82801ix_early_init();
+ setup_pch_gpios(&mainboard_gpio_map);
+
+ mb_setup_lpc();
+
+ mb_setup_superio();
+
+ console_init();
+ report_bist_failure(bist);
+
+ reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3);
+ pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16);
+ if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) {
+ printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
+ gm45_early_reset();
+ }
+
+ /* ASPM related setting, set early by original BIOS. */
+ DMIBAR16(0x204) &= ~(3 << 10);
+
+ /* Check for S3 resume. */
+ const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04);
+ if (((pm1_cnt >> 10) & 7) == 5) {
+ if (acpi_s3_resume_allowed()) {
+ printk(BIOS_DEBUG, "Resume from S3 detected.\n");
+ s3resume = 1;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+ } else {
+ printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
+ }
+ }
+
+ /* RAM initialization */
+ enter_raminit_or_reset();
+ memset(&sysinfo, 0, sizeof(sysinfo));
+ get_mb_spd_addrmap(sysinfo.spd_map);
+ const struct device *dev;
+ dev = pcidev_on_root(2, 0);
+ if (dev)
+ sysinfo.enable_igd = dev->enabled;
+ dev = pcidev_on_root(1, 0);
+ if (dev)
+ sysinfo.enable_peg = dev->enabled;
+ get_gmch_info(&sysinfo);
+
+ mb_pre_raminit_setup(&sysinfo);
+
+ raminit(&sysinfo, s3resume);
+
+ mb_post_raminit_setup();
+
+ const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN);
+ /* Disable D4F0 (unknown signal controller). */
+ pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000);
+
+ init_pm(&sysinfo, 0);
+
+ i82801ix_dmi_setup();
+ gm45_late_init(sysinfo.stepping);
+ i82801ix_dmi_poll_vc1();
+
+ MCHBAR16(SSKPD_MCHBAR) = 0xCAFE;
+
+ init_iommu();
+
+ cbmem_initted = !cbmem_recovery(s3resume);
+
+ romstage_handoff_init(cbmem_initted && s3resume);
+
+ printk(BIOS_SPEW, "exit main()\n");
+}