ec/google/chromeec: Update ec_cmd_api.h and ec_commands.h
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
d0771e49e7 MKBP: Increase key matrix size
The original include/ec_cmd_api.h version in the EC repo is:
d0771e49e7 MKBP: Increase key matrix size
Change-Id: I4f3dfc3f145e50e6114894352cdc118ad5a9565b
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82995
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/ec/google/chromeec/ec_cmd_api.h b/src/ec/google/chromeec/ec_cmd_api.h
index 453f507..cab69b7 100644
--- a/src/ec/google/chromeec/ec_cmd_api.h
+++ b/src/ec/google/chromeec/ec_cmd_api.h
@@ -237,6 +237,12 @@
#define _CROS_EC_C1_F_RF(_cmd, _fn) _CROS_EC_CV_F_R(_cmd, 1, _fn##_v1, _fn##_v1)
/*
+ * Shorthand for host command version 3 where response name is derived
+ * from the function name and there is no param.
+ */
+#define _CROS_EC_C3_F_RF(_cmd, _fn) _CROS_EC_CV_F_R(_cmd, 3, _fn##_v3, _fn##_v3)
+
+/*
* Shorthand for host command version 0 where response and there are no
* params or response.
*/
@@ -312,6 +318,7 @@
_CROS_EC_CV_F_R(EC_CMD_GET_KEYBD_CONFIG, 0, get_keybd_config, keybd_config);
_CROS_EC_C0_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
_CROS_EC_C1_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
+_CROS_EC_C3_F_RF(EC_CMD_GET_NEXT_EVENT, get_next_event);
_CROS_EC_CV_F_R(EC_CMD_GET_NEXT_EVENT, 2, get_next_event_v2, get_next_event_v1);
_CROS_EC_C0_F_PF_RF(EC_CMD_GET_PD_PORT_CAPS, get_pd_port_caps);
_CROS_EC_C0_F_RF(EC_CMD_GET_PROTOCOL_INFO, get_protocol_info);
@@ -368,6 +375,8 @@
_CROS_EC_C0_F_RF(EC_CMD_PCHG_COUNT, pchg_count);
_CROS_EC_CV_F_P(EC_CMD_PD_CHARGE_PORT_OVERRIDE, 0, pd_charge_port_override,
charge_port_override);
+_CROS_EC_CV_F_P_R(EC_CMD_PD_CHIP_INFO, 2, pd_chip_info_v2, pd_chip_info,
+ pd_chip_info_v2);
_CROS_EC_CV_F_P_R(EC_CMD_PD_CHIP_INFO, 1, pd_chip_info_v1, pd_chip_info,
pd_chip_info_v1);
_CROS_EC_C0_F_PF_RF(EC_CMD_PD_CHIP_INFO, pd_chip_info);
@@ -403,6 +412,7 @@
_CROS_EC_C0_F_PF(EC_CMD_RWSIG_ACTION, rwsig_action);
_CROS_EC_C0_F_RF(EC_CMD_RWSIG_CHECK_STATUS, rwsig_check_status);
_CROS_EC_C0_F_RF(EC_CMD_RWSIG_INFO, rwsig_info);
+_CROS_EC_C0_F_PF(EC_CMD_SET_ALARM_SLP_S0_DBG, set_alarm_slp_s0_dbg);
_CROS_EC_C0_F_PF(EC_CMD_SET_BASE_STATE, set_base_state);
_CROS_EC_C0_F_PF(EC_CMD_SET_TABLET_MODE, set_tablet_mode);
_CROS_EC_C0_F_PF_RF(EC_CMD_SMART_DISCHARGE, smart_discharge);
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h
index f57b699c..1673c8b 100644
--- a/src/ec/google/chromeec/ec_commands.h
+++ b/src/ec/google/chromeec/ec_commands.h
@@ -3970,6 +3970,11 @@
* Get the next pending MKBP event.
*
* Returns EC_RES_UNAVAILABLE if there is no event pending.
+ *
+ * V0: ec_response_get_next_data
+ * V1: ec_response_get_next_data_v1. Increased key_matrix size from 13 -> 16.
+ * V2: Added EC_MKBP_HAS_MORE_EVENTS.
+ * V3: ec_response_get_next_data_v3. Increased key_matrix size from 16 -> 18.
*/
#define EC_CMD_GET_NEXT_EVENT 0x0067
@@ -4107,6 +4112,34 @@
};
BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16);
+union __ec_align_offset1 ec_response_get_next_data_v3 {
+ uint8_t key_matrix[18];
+
+ /* Unaligned */
+ uint32_t host_event;
+ uint64_t host_event64;
+
+ struct __ec_todo_unpacked {
+ /* For aligning the fifo_info */
+ uint8_t reserved[3];
+ struct ec_response_motion_sense_fifo_info info;
+ } sensor_fifo;
+
+ uint32_t buttons;
+
+ uint32_t switches;
+
+ uint32_t fp_events;
+
+ uint32_t sysrq;
+
+ /* CEC events from enum mkbp_cec_event */
+ uint32_t cec_events;
+
+ uint8_t cec_message[16];
+};
+BUILD_ASSERT(sizeof(union ec_response_get_next_data_v3) == 18);
+
struct ec_response_get_next_event {
uint8_t event_type;
/* Followed by event data if any */
@@ -4119,6 +4152,12 @@
union ec_response_get_next_data_v1 data;
} __ec_align1;
+struct ec_response_get_next_event_v3 {
+ uint8_t event_type;
+ /* Followed by event data if any */
+ union ec_response_get_next_data_v3 data;
+} __ec_align1;
+
/* Bit indices for buttons and switches.*/
/* Buttons */
#define EC_MKBP_POWER_BUTTON 0
@@ -4587,6 +4626,9 @@
uint8_t subcmd; /* enum ec_console_read_subcmd */
} __ec_align1;
+/* Print directly to EC console from host. */
+#define EC_CMD_CONSOLE_PRINT 0x00AC
+
/*****************************************************************************/
/*
@@ -5818,6 +5860,7 @@
#define PD_EVENT_IDENTITY_RECEIVED BIT(2)
#define PD_EVENT_DATA_SWAP BIT(3)
#define PD_EVENT_TYPEC BIT(4)
+#define PD_EVENT_PPM BIT(5)
struct ec_response_host_event_status {
uint32_t status; /* PD MCU host event status */
@@ -6289,6 +6332,37 @@
} __ec_align2;
} __ec_align2;
+/** Indicates the chip should NOT receive a firmware update, if set. This is
+ * useful when multiple ports are serviced by a single chip, to avoid
+ * performing redundant updates. The host command implementation shall ensure
+ * only one port out of each physical chip has FW updates active.
+ */
+#define USB_PD_CHIP_INFO_FWUP_FLAG_NO_UPDATE BIT(0)
+
+/** Maximum length of a project name embedded in a PDC FW image. This length
+ * does NOT include a NUL-terminator.
+ */
+#define USB_PD_CHIP_INFO_PROJECT_NAME_LEN 12
+struct ec_response_pd_chip_info_v2 {
+ uint16_t vendor_id;
+ uint16_t product_id;
+ uint16_t device_id;
+ union {
+ uint8_t fw_version_string[8];
+ uint64_t fw_version_number;
+ } __ec_align2;
+ union {
+ uint8_t min_req_fw_version_string[8];
+ uint64_t min_req_fw_version_number;
+ } __ec_align2;
+ /** Flag to control the FW update process for this chip. */
+ uint16_t fw_update_flags;
+ /** Project name string associated with the chip's FW. Add an extra
+ * byte for a NUL-terminator.
+ */
+ char fw_name_str[USB_PD_CHIP_INFO_PROJECT_NAME_LEN + 1];
+} __ec_align2;
+
/* Run RW signature verification and get status */
#define EC_CMD_RWSIG_CHECK_STATUS 0x011C
@@ -6396,6 +6470,38 @@
} __ec_align1;
/*
+ * Retrieve binary from CrOS Board Info primary memory source.
+ */
+#define EC_CMD_CBI_BIN_READ 0x0504
+/*
+ * Write binary into CrOS Board Info temporary buffer and then commit it to
+ * permanent storage once complete. Write fails if the board has hardware
+ * write-protect enabled.
+ */
+#define EC_CMD_CBI_BIN_WRITE 0x0505
+
+/*
+ * CBI binary read/write flags
+ * The default write behavior is to always append any data to the buffer.
+ * If 'CLEAR' flag is set, buffer is cleared then data is appended.
+ * If 'WRITE' flag is set, data is appended then buffer is written to memory.
+ */
+#define EC_CBI_BIN_BUFFER_CLEAR BIT(0)
+#define EC_CBI_BIN_BUFFER_WRITE BIT(1)
+
+struct ec_params_get_cbi_bin {
+ uint32_t offset; /* Data offset */
+ uint32_t size; /* Data size */
+} __ec_align4;
+
+struct ec_params_set_cbi_bin {
+ uint32_t offset; /* Data offset */
+ uint32_t size; /* Data size */
+ uint8_t flags; /* bit field for EC_CBI_BIN_COMMIT_FLAG_* */
+ uint8_t data[]; /* For string and raw data */
+} __ec_align1;
+
+/*
* Information about resets of the AP by the EC and the EC's own uptime.
*/
#define EC_CMD_GET_UPTIME_INFO 0x0121
@@ -6798,6 +6904,8 @@
TK_MICMUTE = 19,
TK_MENU = 20,
TK_DICTATE = 21,
+ TK_ACCESSIBILITY = 22,
+ TK_DONOTDISTURB = 23,
TK_COUNT
};
@@ -7856,6 +7964,36 @@
uint32_t state;
} __ec_align1;
+/*
+ * UCSI OPM-PPM commands
+ *
+ * These commands are used for communication between OPM and PPM.
+ * Only UCSI3.0 is tested.
+ */
+
+#define EC_CMD_UCSI_PPM_SET 0x0140
+
+/* The data size is stored in the host command protocol header. */
+struct ec_params_ucsi_ppm_set {
+ uint16_t offset;
+ uint8_t data[];
+} __ec_align2;
+
+#define EC_CMD_UCSI_PPM_GET 0x0141
+
+/* For 'GET' sub-commands, data will be returned as a raw payload. */
+struct ec_params_ucsi_ppm_get {
+ uint16_t offset;
+ uint8_t size;
+} __ec_align2;
+
+#define EC_CMD_SET_ALARM_SLP_S0_DBG 0x0142
+
+/* RTC params and response structures */
+struct ec_params_set_alarm_slp_s0_dbg {
+ uint32_t time;
+} __ec_align2;
+
/*****************************************************************************/
/* The command range 0x200-0x2FF is reserved for Rotor. */
@@ -8023,7 +8161,8 @@
/* Constants for encryption parameters */
#define FP_CONTEXT_NONCE_BYTES 12
-#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t))
+#define FP_CONTEXT_USERID_BYTES 32
+#define FP_CONTEXT_USERID_WORDS (FP_CONTEXT_USERID_BYTES / sizeof(uint32_t))
#define FP_CONTEXT_TAG_BYTES 16
#define FP_CONTEXT_ENCRYPTION_SALT_BYTES 16
#define FP_CONTEXT_TPM_BYTES 32
@@ -8255,6 +8394,21 @@
uint16_t fgr_num;
} __ec_align4;
+/*
+ * Migrate a legacy FP template (here, legacy refers to being generated in a
+ * raw user_id context instead of a nonce context) by wiping its match secret
+ * salt and treating it as a newly-enrolled template.
+ * The legacy FP template needs to be uploaded by FP_TEMPLATE command first
+ * without committing, then this command will commit it.
+ */
+#define EC_CMD_FP_MIGRATE_TEMPLATE_TO_NONCE_CONTEXT 0x0418
+
+struct ec_params_fp_migrate_template_to_nonce_context {
+ /* The context userid used to encrypt this template when it was created.
+ */
+ uint32_t userid[FP_CONTEXT_USERID_WORDS];
+};
+
/*****************************************************************************/
/* Touchpad MCU commands: range 0x0500-0x05FF */