nb/intel/sandybridge: Move to C_ENVIRONMENT_BOOTBLOCK
There is some overlap between romstage and bootblock.
LPC setup and BAR initialization is now done twice.
The rationale is that the romstage should not depend too
much on the bootblock, since it can reside in a RO fmap
region.
Enabling the console will be done in a followup patch.
Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig
index 8dae6ec..223703e 100644
--- a/src/cpu/intel/model_206ax/Kconfig
+++ b/src/cpu/intel/model_206ax/Kconfig
@@ -21,10 +21,8 @@
select CPU_INTEL_COMMON_TIMEBASE
select PARALLEL_MP
select NO_FIXED_XIP_ROM_SIZE
-
-config BOOTBLOCK_CPU_INIT
- string
- default "cpu/intel/model_206ax/bootblock.c"
+ select C_ENVIRONMENT_BOOTBLOCK
+ select NO_BOOTBLOCK_CONSOLE
config SMM_TSEG_SIZE
hex
diff --git a/src/cpu/intel/model_206ax/Makefile.inc b/src/cpu/intel/model_206ax/Makefile.inc
index 391d126..d824da1 100644
--- a/src/cpu/intel/model_206ax/Makefile.inc
+++ b/src/cpu/intel/model_206ax/Makefile.inc
@@ -21,7 +21,11 @@
cpu_microcode_bins += $(wildcard 3rdparty/intel-microcode/intel-ucode/06-2a-*)
cpu_microcode_bins += $(wildcard 3rdparty/intel-microcode/intel-ucode/06-3a-*)
-cpu_incs-y += $(src)/cpu/intel/car/non-evict/cache_as_ram.S
+bootblock-y += bootblock.c
+bootblock-y += ../car/non-evict/cache_as_ram.S
+bootblock-y += ../../x86/early_reset.S
+bootblock-y += ../car/bootblock.c
+
postcar-y += ../car/non-evict/exit_car.S
romstage-y += ../car/romstage.c
diff --git a/src/cpu/intel/model_206ax/bootblock.c b/src/cpu/intel/model_206ax/bootblock.c
index 72b4a67..da0333f 100644
--- a/src/cpu/intel/model_206ax/bootblock.c
+++ b/src/cpu/intel/model_206ax/bootblock.c
@@ -13,13 +13,11 @@
#include <stdint.h>
#include <arch/cpu.h>
-#include <cpu/x86/cache.h>
#include <cpu/x86/msr.h>
-#include <cpu/x86/mtrr.h>
#include <arch/io.h>
#include <halt.h>
+#include <cpu/intel/car/bootblock.h>
-#include <cpu/intel/microcode/microcode.c>
#include "model_206ax.h"
#if CONFIG(SOUTHBRIDGE_INTEL_BD82X6X) || \
@@ -30,35 +28,6 @@
#error "CPU must be paired with Intel BD82X6X or C216 southbridge"
#endif
-static void set_var_mtrr(unsigned int reg, unsigned int base, unsigned int size,
- unsigned int type)
-
-{
- /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
- /* FIXME: It only support 4G less range */
- msr_t basem, maskm;
- basem.lo = base | type;
- basem.hi = 0;
- wrmsr(MTRR_PHYS_BASE(reg), basem);
- maskm.lo = ~(size - 1) | MTRR_PHYS_MASK_VALID;
- maskm.hi = (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1;
- wrmsr(MTRR_PHYS_MASK(reg), maskm);
-}
-
-static void enable_rom_caching(void)
-{
- msr_t msr;
-
- disable_cache();
- set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT);
- enable_cache();
-
- /* Enable Variable MTRRs */
- msr.hi = 0x00000000;
- msr.lo = 0x00000800;
- wrmsr(MTRR_DEF_TYPE_MSR, msr);
-}
-
static void set_flex_ratio_to_tdp_nominal(void)
{
msr_t flex_ratio, msr;
@@ -109,10 +78,8 @@
halt();
}
-static void bootblock_cpu_init(void)
+void bootblock_early_cpu_init(void)
{
/* Set flex ratio and reset if needed */
set_flex_ratio_to_tdp_nominal();
- enable_rom_caching();
- intel_update_microcode_from_cbfs();
}