diff --git a/src/mainboard/intel/minnow3/Kconfig b/src/mainboard/intel/minnow3/Kconfig
new file mode 100644
index 0000000..487408c
--- /dev/null
+++ b/src/mainboard/intel/minnow3/Kconfig
@@ -0,0 +1,17 @@
+if BOARD_INTEL_MINNOW3
+
+config BOARD_SPECIFIC_OPTIONS
+	def_bool y
+	select SOC_INTEL_APOLLOLAKE
+	select BOARD_ROMSIZE_KB_16384
+	select HAVE_ACPI_TABLES
+
+config MAINBOARD_DIR
+	string
+	default intel/minnow3
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "Minnow3"
+
+endif # BOARD_INTEL_MINNOW3
diff --git a/src/mainboard/intel/minnow3/Kconfig.name b/src/mainboard/intel/minnow3/Kconfig.name
new file mode 100644
index 0000000..a62f36f
--- /dev/null
+++ b/src/mainboard/intel/minnow3/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_INTEL_MINNOW3
+	bool "Minnow3"
diff --git a/src/mainboard/intel/minnow3/Makefile.inc b/src/mainboard/intel/minnow3/Makefile.inc
new file mode 100644
index 0000000..9e3e892
--- /dev/null
+++ b/src/mainboard/intel/minnow3/Makefile.inc
@@ -0,0 +1,3 @@
+bootblock-y += bootblock.c
+
+ramstage-y += mainboard.c
diff --git a/src/mainboard/intel/minnow3/acpi_tables.c b/src/mainboard/intel/minnow3/acpi_tables.c
new file mode 100644
index 0000000..e06f6a6
--- /dev/null
+++ b/src/mainboard/intel/minnow3/acpi_tables.c
@@ -0,0 +1,3 @@
+/*
+ * Blank file required by build system assumptions of this file being present.
+ */
diff --git a/src/mainboard/intel/minnow3/board_info.txt b/src/mainboard/intel/minnow3/board_info.txt
new file mode 100644
index 0000000..0b891a2
--- /dev/null
+++ b/src/mainboard/intel/minnow3/board_info.txt
@@ -0,0 +1,6 @@
+Vendor name: Intel
+Board name: MinnowBoard 3
+Category: eval
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/intel/minnow3/bootblock.c b/src/mainboard/intel/minnow3/bootblock.c
new file mode 100644
index 0000000..3de44a8
--- /dev/null
+++ b/src/mainboard/intel/minnow3/bootblock.c
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <bootblock_common.h>
+#include <soc/lpc.h>
+
+void bootblock_mainboard_init(void)
+{
+	lpc_configure_pads();
+}
diff --git a/src/mainboard/intel/minnow3/brd_gpio.h b/src/mainboard/intel/minnow3/brd_gpio.h
new file mode 100644
index 0000000..33b839b
--- /dev/null
+++ b/src/mainboard/intel/minnow3/brd_gpio.h
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015-2016 Intel Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <soc/gpio.h>
+
+#if ENV_ROMSTAGE
+
+static const struct pad_config gpio_table[] = {
+	PAD_CFG_NF(GPIO_134, NATIVE, DEEP, NF2), /* ISH_I2C0_SDA/IO-OD */
+	PAD_CFG_NF(GPIO_135, NATIVE, DEEP, NF2), /* ISH_I2C0_SCL/IO-OD */
+	PAD_CFG_NF(GPIO_136, NATIVE, DEEP, NF2), /* ISH_I2C1_SDA/IO-OD */
+	PAD_CFG_NF(GPIO_137, NATIVE, DEEP, NF2), /* ISH_I2C1_SCL/IO-OD */
+
+	PAD_CFG_NF(GPIO_0, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_1, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_2, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_3, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_4, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_5, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_6, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_7, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(GPIO_8, NATIVE, DEEP, NF1),
+
+	/* EXP_I2C_SDA and I2C_PSS_SDA and I2C_2_SDA_IOEXP */
+	PAD_CFG_NF(GPIO_7, NATIVE, DEEP, NF1),
+	/* EXP_I2C_SCL and I2C_PSS_SCL and I2C_2_SCL_IOEXP */
+	PAD_CFG_NF(GPIO_8, NATIVE, DEEP, NF1),
+
+	PAD_CFG_GPO(GPIO_152, 0, DEEP), /* PERST# */
+	PAD_CFG_GPO(GPIO_19, 1, DEEP), /* PFET */
+	PAD_CFG_GPO(GPIO_13, 0, DEEP), /* PERST# */
+	PAD_CFG_GPO(GPIO_17, 1, DEEP), /* PFET */
+	PAD_CFG_GPO(GPIO_15, 0, DEEP), /* PERST# */
+
+	PAD_CFG_NF(GPIO_210, NATIVE, DEEP, NF1), /* CLKREQ# */
+
+	PAD_CFG_NF(SMB_CLK, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(SMB_DATA, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_ILB_SERIRQ, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_CLKOUT0, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_CLKOUT1, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_AD0, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_AD1, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_AD2, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_AD3, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_CLKRUNB, NATIVE, DEEP, NF1),
+	PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1),
+};
+
+#endif
diff --git a/src/mainboard/intel/minnow3/devicetree.cb b/src/mainboard/intel/minnow3/devicetree.cb
new file mode 100644
index 0000000..2ccf277
--- /dev/null
+++ b/src/mainboard/intel/minnow3/devicetree.cb
@@ -0,0 +1,230 @@
+chip soc/intel/apollolake
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	register "pcie_rp0_clkreq_pin" = "0"    # wifi/bt
+	# Disable unused clkreq of PCIe root ports
+	register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
+
+	# GPIO for PERST_0
+	# If the Board has PERST_0 signal, assign the GPIO
+	# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+	register "prt0_gpio" = "GPIO_122"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [14:8] steps of delay for HS400, each 125ps.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps.
+	register "emmc_tx_data_cntl1" = "0x0C16"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_tx_data_cntl2" = "0x28162828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [17:16] stands for Rx Clock before Output Buffer
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+	# [6:0] steps of delay for HS200, each 125ps.
+	register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# PL1 override 12000 mW: the energy calculation is wrong with the
+	# current VR solution. Experiments show that SoC TDP max (6W) can
+	# be reached when RAPL PL1 is set to 12W.
+	register "tdp_pl1_override_mw" = "12000"
+	# Set RAPL PL2 to 15W.
+	register "tdp_pl2_override_mw" = "15000"
+
+	# Enable Audio Clock and Power gating
+	register "hdaudio_clk_gate_enable" = "1"
+	register "hdaudio_pwr_gate_enable" = "1"
+	register "hdaudio_bios_config_lockdown" = "1"
+
+	# Enable lpss s0ix
+	register "lpss_s0ix_enable" = "1"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route, i.e., if this route changes then the affected GPE
+	# offset bits also need to be changed. This sets the PMC register
+	# GPE_CFG fields.
+	register "gpe0_dw1" = "PMC_GPE_N_31_0"
+	register "gpe0_dw2" = "PMC_GPE_N_63_32"
+	register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+	# Enable I2C0 for audio codec at 400kHz
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 104,
+		.fall_time_ns = 52,
+	}"
+
+	# Enable I2C2 bus early for TPM at 400kHz
+	register "i2c[2]" = "{
+		.early_init = 1,
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 57,
+		.fall_time_ns = 28,
+	}"
+
+	# touchscreen at 400kHz
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 76,
+		.fall_time_ns = 164,
+	}"
+
+	# trackpad at 400kHz
+	register "i2c[4]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 114,
+		.fall_time_ns = 164,
+	}"
+
+	# digitizer at 400kHz
+	register "i2c[5]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 152,
+		.fall_time_ns = 30,
+	}"
+
+	# Minimum SLP S3 assertion width 28ms.
+	register "slp_s3_assertion_width_usecs" = "28000"
+
+	device domain 0 on
+		device pci 00.0 on  end	# - Host Bridge
+		device pci 00.1 on  end	# - DPTF
+		device pci 00.2 on  end	# - NPK
+		device pci 02.0 on  end	# - Gen
+		device pci 03.0 on  end	# - Iunit
+		device pci 0d.0 on  end	# - P2SB
+		device pci 0d.1 on  end	# - PMC
+		device pci 0d.2 on  end	# - SPI
+		device pci 0d.3 on  end	# - Shared SRAM
+		device pci 0e.0 on	# - Audio
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device pci 11.0 off end	# - ISH
+		device pci 12.0 off end	# - SATA
+		device pci 13.0 off end	# - Root Port 2 - PCIe-A 0
+		device pci 13.1 off end	# - Root Port 3 - PCIe-A 1
+		device pci 13.2 off end	# - Root Port 4 - PCIe-A 2
+		device pci 13.3 off end	# - Root Port 5 - PCIe-A 3
+		device pci 14.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW3_00"
+				device pci 00.0 on end
+			end
+		end	# - Root Port 0 - PCIe-B 0 - Wifi
+		device pci 14.1 off end	# - Root Port 1 - PCIe-B 1
+		device pci 15.0 on  end	# - XHCI
+		device pci 15.1 off end # - XDCI
+		device pci 16.0 on	# - I2C 0
+			chip drivers/i2c/da7219
+				register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+				device i2c 50 on end
+			end
+		end	# - I2C 2
+		device pci 16.3 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0001""
+				register "desc" = ""ELAN Touchscreen""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+				register "probed" = "1"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
+				register "reset_delay_ms" = "20"
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)"
+				register "enable_delay_ms" = "1"
+				register "has_power_resource" = "1"
+				device i2c 10 on end
+			end
+		end	# - I2C 3
+		device pci 17.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+				register "wake" = "GPE0_DW1_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # - I2C 4
+		device pci 17.1 on
+			chip drivers/i2c/wacom
+				register "generic" = "{
+					 .hid = WCOM50C1_HID,
+					 .cid = PNP0C50_CID,
+					 .desc = WCOM_DT_DESC,
+					 .irq = IRQ_LEVEL_LOW(GPIO_13_IRQ),
+				}"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x9 on end
+			end
+		end	# - I2C 5
+		device pci 17.2 off end	# - I2C 6
+		device pci 17.3 off end	# - I2C 7
+		device pci 18.0 on  end	# - UART 0
+		device pci 18.1 on  end	# - UART 1
+		device pci 18.2 on  end	# - UART 2
+		device pci 18.3 off end	# - UART 3
+		device pci 19.0 on  end	# - SPI 0
+		device pci 19.1 off end	# - SPI 1
+		device pci 19.2 off end	# - SPI 2
+		device pci 1a.0 on  end	# - PWM
+		device pci 1b.0 on  end	# - SDCARD
+		device pci 1c.0 on  end	# - eMMC
+		device pci 1e.0 off end	# - SDIO
+		device pci 1f.0 on	# - LPC
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end
+		device pci 1f.1 on  end	# - SMBUS
+	end
+end
diff --git a/src/mainboard/intel/minnow3/dsdt.asl b/src/mainboard/intel/minnow3/dsdt.asl
new file mode 100644
index 0000000..004523a
--- /dev/null
+++ b/src/mainboard/intel/minnow3/dsdt.asl
@@ -0,0 +1,42 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+DefinitionBlock(
+	"dsdt.aml",
+	"DSDT",
+	0x05,		// DSDT revision: ACPI v5.0
+	"COREv4",	// OEM id
+	"COREBOOT",	// OEM table id
+	0x20110725	// OEM revision
+)
+{
+	/* global NVS and variables */
+	#include <soc/intel/apollolake/acpi/globalnvs.asl>
+
+	/* CPU */
+	#include <soc/intel/apollolake/acpi/cpu.asl>
+
+	Scope (\_SB) {
+		Device (PCI0)
+		{
+			#include <soc/intel/apollolake/acpi/northbridge.asl>
+			#include <soc/intel/apollolake/acpi/southbridge.asl>
+			#include <soc/intel/apollolake/acpi/pch_hda.asl>
+		}
+	}
+
+	/* Chipset specific sleep states */
+	#include <soc/intel/apollolake/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/intel/minnow3/mainboard.c b/src/mainboard/intel/minnow3/mainboard.c
new file mode 100644
index 0000000..f7a2ef1
--- /dev/null
+++ b/src/mainboard/intel/minnow3/mainboard.c
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/device.h>
+
+static void mainboard_init(void *chip_info)
+{
+	/* Nothing Here Yet */
+}
+
+struct chip_operations mainboard_ops = {
+	.init = mainboard_init,
+};
diff --git a/src/mainboard/intel/minnow3/minnow3.fmd b/src/mainboard/intel/minnow3/minnow3.fmd
new file mode 100644
index 0000000..0782047
--- /dev/null
+++ b/src/mainboard/intel/minnow3/minnow3.fmd
@@ -0,0 +1,40 @@
+FLASH 16M {
+	WP_RO@0x0 0x480000 {
+		SI_DESC@0x0 0x1000
+		IFWI@0x1000 0x27f000
+		RO_VPD@0x280000 0x4000
+		RO_SECTION@0x284000 0x1fc000 {
+			FMAP@0x0 0x800
+			COREBOOT(CBFS)@0x1000 0x1bb000
+			RO_UNUSED@0x1bc000 0x40000
+		}
+	}
+	MISC_RW@0x480000 0x30000 {
+		UNIFIED_MRC_CACHE@0x0 0x21000 {
+			RECOVERY_MRC_CACHE@0x0 0x10000
+			RW_MRC_CACHE@0x10000 0x10000
+			RW_VAR_MRC_CACHE@0x20000 0x1000
+		}
+		RW_ELOG@0x21000 0x3000
+		RW_SHARED@0x24000 0x4000 {
+			SHARED_DATA@0x0 0x2000
+			VBLOCK_DEV@0x2000 0x2000
+		}
+		RW_VPD@0x28000 0x2000
+		RW_NVRAM@0x2a000 0x6000
+	}
+	RW_LEGACY(CBFS)@0xd30000 0x200000
+	BIOS_UNUSABLE@0xf30000 0x4f000
+	DEVICE_EXTENSION@0xf7f000 0x80000
+	# Currently, it is required that the BIOS region be a multiple of 8KiB.
+	# This is required so that the recovery mechanism can find SIGN_CSE
+	# region aligned to 4K at the center of BIOS region. Since the
+	# descriptor at the beginning uses 4K and BIOS starts at an offset of
+	# 4K, a hole of 4K is created towards the end of the flash to compensate
+	# for the size requirement of BIOS region.
+	# FIT tool thus creates descriptor with following regions:
+	# Descriptor --> 0 to 4K
+	# BIOS       --> 4K to 0xf7f000
+	# Device ext --> 0xf7f000 to 0xfff000
+	UNUSED_HOLE@0xfff000 0x1000
+}
diff --git a/src/mainboard/intel/minnow3/romstage.c b/src/mainboard/intel/minnow3/romstage.c
new file mode 100644
index 0000000..5c784ba
--- /dev/null
+++ b/src/mainboard/intel/minnow3/romstage.c
@@ -0,0 +1,119 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <string.h>
+#include <soc/romstage.h>
+#include <fsp/api.h>
+#include <FspmUpd.h>
+#include "brd_gpio.h"
+
+static const uint8_t Ch0_Bit_swizzling[] = {
+	0x09, 0x0e, 0x0c, 0x0d, 0x0a, 0x0b, 0x08, 0x0f,
+	0x05, 0x06, 0x01, 0x00, 0x02, 0x07, 0x04, 0x03,
+	0x1a, 0x1f, 0x1c, 0x1b, 0x1d, 0x19, 0x18, 0x1e,
+	0x14, 0x16, 0x17, 0x11, 0x12, 0x13, 0x10, 0x15
+};
+static const uint8_t Ch1_Bit_swizzling[] = {
+	0x06, 0x07, 0x05, 0x04, 0x03, 0x01, 0x00, 0x02,
+	0x0c, 0x0a, 0x0b, 0x0d, 0x0e, 0x08, 0x09, 0x0f,
+	0x14, 0x10, 0x16, 0x15, 0x12, 0x11, 0x13, 0x17,
+	0x1e, 0x1c, 0x1d, 0x19, 0x18, 0x1a, 0x1b, 0x1f
+};
+static const uint8_t Ch2_Bit_swizzling[] = {
+	0x0f, 0x09, 0x08, 0x0b, 0x0c, 0x0d, 0x0e, 0x0a,
+	0x05, 0x02, 0x00, 0x03, 0x06, 0x07, 0x01, 0x04,
+	0x19, 0x1c, 0x1e, 0x1f, 0x1a, 0x1b, 0x18, 0x1d,
+	0x14, 0x17, 0x16, 0x15, 0x12, 0x13, 0x10, 0x11
+};
+static const uint8_t Ch3_Bit_swizzling[] = {
+	0x03, 0x04, 0x06, 0x05, 0x00, 0x01, 0x02, 0x07,
+	0x0b, 0x0a, 0x08, 0x09, 0x0e, 0x0c, 0x0f, 0x0d,
+	0x11, 0x17, 0x13, 0x10, 0x15, 0x16, 0x14, 0x12,
+	0x1c, 0x1d, 0x1a, 0x19, 0x1e, 0x1b, 0x18, 0x1f
+};
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	/* setup early gpio before memory */
+	gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+
+	/* DRAM Config settings */
+	memupd->FspmConfig.Package = 0x1;
+	memupd->FspmConfig.Profile = 0xB;
+	memupd->FspmConfig.MemoryDown = 0x1;
+	memupd->FspmConfig.DDR3LPageSize = 0x0;
+	memupd->FspmConfig.DDR3LASR = 0x0;
+	memupd->FspmConfig.ScramblerSupport = 0x1;
+	memupd->FspmConfig.ChannelHashMask = 0x36;
+	memupd->FspmConfig.SliceHashMask = 0x9;
+	memupd->FspmConfig.InterleavedMode = 0x2;
+	memupd->FspmConfig.ChannelsSlicesEnable = 0x0;
+	memupd->FspmConfig.MinRefRate2xEnable = 0x0;
+	memupd->FspmConfig.DualRankSupportEnable = 0x1;
+	memupd->FspmConfig.RmtMode = 0x0;
+	memupd->FspmConfig.MemorySizeLimit = 0x1800;
+	memupd->FspmConfig.LowMemoryMaxValue = 0x0;
+	memupd->FspmConfig.DisableFastBoot = 0x0;
+	memupd->FspmConfig.HighMemoryMaxValue = 0x0;
+	memupd->FspmConfig.DIMM0SPDAddress = 0x0;
+	memupd->FspmConfig.DIMM1SPDAddress = 0x0;
+	memupd->FspmConfig.Ch0_RankEnable = 0x3;
+	memupd->FspmConfig.Ch0_DeviceWidth = 0x1;
+	memupd->FspmConfig.Ch0_DramDensity = 0x2;
+	memupd->FspmConfig.Ch0_Option = 0x3;
+	memupd->FspmConfig.Ch0_OdtConfig = 0x0;
+	memupd->FspmConfig.Ch0_TristateClk1 = 0x0;
+	memupd->FspmConfig.Ch0_Mode2N = 0x0;
+	memupd->FspmConfig.Ch0_OdtLevels = 0x0;
+	memupd->FspmConfig.Ch1_RankEnable = 0x3;
+	memupd->FspmConfig.Ch1_DeviceWidth = 0x1;
+	memupd->FspmConfig.Ch1_DramDensity = 0x2;
+	memupd->FspmConfig.Ch1_Option = 0x3;
+	memupd->FspmConfig.Ch1_OdtConfig = 0x0;
+	memupd->FspmConfig.Ch1_TristateClk1 = 0x0;
+	memupd->FspmConfig.Ch1_Mode2N = 0x0;
+	memupd->FspmConfig.Ch1_OdtLevels = 0x0;
+	memupd->FspmConfig.Ch2_RankEnable = 0x3;
+	memupd->FspmConfig.Ch2_DeviceWidth = 0x1;
+	memupd->FspmConfig.Ch2_DramDensity = 0x2;
+	memupd->FspmConfig.Ch2_Option = 0x3;
+	memupd->FspmConfig.Ch2_OdtConfig = 0x0;
+	memupd->FspmConfig.Ch2_TristateClk1 = 0x0;
+	memupd->FspmConfig.Ch2_Mode2N = 0x0;
+	memupd->FspmConfig.Ch2_OdtLevels = 0x0;
+	memupd->FspmConfig.Ch3_RankEnable = 0x3;
+	memupd->FspmConfig.Ch3_DeviceWidth = 0x1;
+	memupd->FspmConfig.Ch3_DramDensity = 0x2;
+	memupd->FspmConfig.Ch3_Option = 0x3;
+	memupd->FspmConfig.Ch3_OdtConfig = 0x0;
+	memupd->FspmConfig.Ch3_TristateClk1 = 0x0;
+	memupd->FspmConfig.Ch3_Mode2N = 0x0;
+	memupd->FspmConfig.Ch3_OdtLevels = 0x0;
+	memupd->FspmConfig.RmtCheckRun = 0x0;
+	memupd->FspmConfig.MrcDataSaving = 0x0;
+	memupd->FspmConfig.MrcFastBoot   = 0x0;
+
+	memcpy(memupd->FspmConfig.Ch0_Bit_swizzling, &Ch0_Bit_swizzling,
+		sizeof(Ch0_Bit_swizzling));
+	memcpy(memupd->FspmConfig.Ch1_Bit_swizzling, &Ch1_Bit_swizzling,
+		sizeof(Ch1_Bit_swizzling));
+	memcpy(memupd->FspmConfig.Ch2_Bit_swizzling, &Ch2_Bit_swizzling,
+		sizeof(Ch2_Bit_swizzling));
+	memcpy(memupd->FspmConfig.Ch3_Bit_swizzling, &Ch3_Bit_swizzling,
+		sizeof(Ch3_Bit_swizzling));
+
+	memupd->FspmConfig.RmtMarginCheckScaleHighThreshold = 0x0;
+	memupd->FspmConfig.MsgLevelMask = 0x0;
+}