mb/asus/p5qpl-am: Add mainboard
This mainboard has the BSEL straps hooked up to the SuperIO
similar to the ASUS P5GC-MX and might therefore require a restart.
Tested:
- FSB 800, 1067 and 1333MHz CPUs
- USB
- Ethernet
- Serial
- 2 DIMM slots
- SATA
- Libgfxinit (VGA)
TESTED with SeaBIOS (sercon disabled) and Linux 4.19.
Change-Id: Id845289081751ff8900e366592745f16d96f07c0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
diff --git a/src/mainboard/asus/p5qpl-am/devicetree.cb b/src/mainboard/asus/p5qpl-am/devicetree.cb
new file mode 100644
index 0000000..f721f08
--- /dev/null
+++ b/src/mainboard/asus/p5qpl-am/devicetree.cb
@@ -0,0 +1,121 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2017 Arthur Heymans <arthur@aheymans.xyz>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+chip northbridge/intel/x4x # Northbridge
+ device cpu_cluster 0 on # APIC cluster
+ chip cpu/intel/socket_LGA775
+ device lapic 0 on end
+ end
+ chip cpu/intel/model_1067x # CPU
+ device lapic 0xACAC off end
+ end
+ end
+ device domain 0 on # PCI domain
+ subsystemid 0x1043 0x836d inherit
+ device pci 0.0 on end # Host Bridge
+ device pci 1.0 on end # PEG
+ device pci 2.0 on end # Integrated graphics controller
+ chip southbridge/intel/i82801gx # Southbridge
+ register "pirqa_routing" = "0x0b"
+ register "pirqb_routing" = "0x0b"
+ register "pirqc_routing" = "0x0b"
+ register "pirqd_routing" = "0x0b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x0b"
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+
+ register "ide_enable_primary" = "0x1"
+ register "sata_ahci" = "0x0" # AHCI not supported on this ICH7 variant
+ register "gpe0_en" = "0x04000440"
+
+ device pci 1b.0 on end # Audio
+ device pci 1c.0 on end # PCIe 1
+ device pci 1c.1 on # PCIe 2: NIC
+ device pci 00.0 on
+ end
+ end
+ device pci 1c.2 off end # PCIe 3
+ device pci 1c.3 off end # PCIe 4
+ device pci 1c.4 off end # PCIe 5
+ device pci 1c.5 off end # PCIe 6
+ device pci 1d.0 on end # USB
+ device pci 1d.1 on end # USB
+ device pci 1d.2 on end # USB
+ device pci 1d.3 on end # USB
+ device pci 1d.7 on end # USB
+ device pci 1e.0 on end # PCI bridge
+ device pci 1e.2 off end # AC'97 Audio Controller
+ device pci 1e.3 off end # AC'97 Modem Controller
+ device pci 1f.0 on # ISA bridge
+ chip superio/winbond/w83627dhg
+ device pnp 2e.0 off end # Floppy
+ device pnp 2e.1 on # Parallel port
+ # global
+ irq 0x2c = 0x92
+ # parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.2 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off end # COM2, IR
+ device pnp 2e.5 on # Keyboard, mouse
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 2e.6 off end # SPI
+ device pnp 2e.7 on end # GPIO6 (all input)
+ device pnp 2e.8 off end # WDT0#, PLED
+ device pnp 2e.9 off end # GPIO2
+ device pnp 2e.109 on # GPIO3
+ irq 0xf0 = 0xf3
+# irq 0xf1 = 0x08
+ end
+ device pnp 2e.209 on # GPIO4
+ irq 0xf4 = 0x00
+ end
+ device pnp 2e.309 off end # GPIO5
+ device pnp 2e.a on # ACPI
+ irq 0x70 = 0
+ irq 0xe4 = 0x10 # VSBGATE# to power dram during S3
+ end
+ device pnp 2e.b on # HWM, front pannel LED
+ io 0x60 = 0x290
+ irq 0x70 = 0
+ end
+ device pnp 2e.c on # PECI, SST
+ irq 0xe0 = 0x10
+ irq 0xe1 = 0x64
+ irq 0xe8 = 0x01
+ end
+ end
+ end
+ device pci 1f.1 on end # PATA/IDE
+ device pci 1f.2 on end # SATA
+ device pci 1f.3 on end # SMbus
+ end
+ end
+end