baytrail/rambi: S3 support and other updates
baytrail: Change all GPIO related pull resistors from 10K to 20K
Reviewed-on: https://chromium-review.googlesource.com/187570
(cherry picked from commit 762e99861dd1ae61ddcf1ebdec8e698ede54405e)
baytrail: workaround kernel using serial console on resume
Reviewed-on: https://chromium-review.googlesource.com/188011
(cherry picked from commit b0da3bdb5b6b417ad6cab0084359d4eae1cb4469)
baytrail: allow dirty cache line evictions for SMRAM to stick
Reviewed-on: https://chromium-review.googlesource.com/188015
(cherry picked from commit 50fb1e6a844e1db05574c92625da23777ad7a0ca)
baytrail: Optionally pull up TDO and TMS to avoid power loss in S3.
Reviewed-on: https://chromium-review.googlesource.com/188260
(cherry picked from commit e240856609b4eed5ed44ec4e021ed385965768d6)
rambi: always load option rom
Reviewed-on: https://chromium-review.googlesource.com/188721
(cherry picked from commit d8a1d108548d20755f8683497c215e76d513b7a9)
baytrail: use new chromeos ram oops API
Reviewed-on: https://chromium-review.googlesource.com/186394
(cherry picked from commit f38e6969df9b5453b10d49be60b5d033d38b4594)
rambi: always show dev/rec screens on eDP connected panel
Reviewed-on: https://chromium-review.googlesource.com/188731
(cherry picked from commit 7d8570ac52f68492a2250fa536d55f7cbbd9ef95)
baytrail: stop e820 reserving default SMM region
Reviewed-on: https://chromium-review.googlesource.com/189084
(cherry picked from commit 6fce823512f5db5a09a9c89048334c3524c69a24)
baytrai: update MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/189196
(cherry picked from commit 36b33a25b6603b6a74990b00d981226440b68970)
rambi: Put LPE device into ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/189371
(cherry picked from commit 5955350cd57fd1b3732b6db62911d824712a5413)
baytrail: DPTF: Enable mainboard-specific PPCC
Reviewed-on: https://chromium-review.googlesource.com/189576
(cherry picked from commit 27fae3e670244b529b7c0241742fc2b55d52c612)
baytrail: Add config option for PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189994
(cherry picked from commit 1cc31a7c021ec84311f1d4e89dd3e57ca8801ab5)
rambi: Enable PCIe wake
Reviewed-on: https://chromium-review.googlesource.com/189995
(cherry picked from commit c98ae1fee54cfb2b3d3c21a19cdbbf56a0bfa1e6)
Squashed 13 commits for baytrail/rambi.
Change-Id: I153ef5a43e2bede05cfd624f53e24a0013fd8fb4
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6957
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig
index eee7d11..aa55444 100644
--- a/src/soc/intel/baytrail/Kconfig
+++ b/src/soc/intel/baytrail/Kconfig
@@ -10,6 +10,7 @@
select ARCH_BOOTBLOCK_X86_32
select ARCH_ROMSTAGE_X86_32
select ARCH_RAMSTAGE_X86_32
+ select BACKUP_DEFAULT_SMM_REGION
select CACHE_MRC_SETTINGS
select CAR_MIGRATION
select COLLECT_TIMESTAMPS
diff --git a/src/soc/intel/baytrail/acpi/dptf/cpu.asl b/src/soc/intel/baytrail/acpi/dptf/cpu.asl
index 89f9b8b..87f1d19 100644
--- a/src/soc/intel/baytrail/acpi/dptf/cpu.asl
+++ b/src/soc/intel/baytrail/acpi/dptf/cpu.asl
@@ -127,26 +127,11 @@
}
}
- Name (PPCC, Package ()
+ /* Return PPCC table defined by mainboard */
+ Method (PPCC)
{
- 0x2, // Revision
- Package () { // Power Limit 1
- 0, // PowerLimitIndex, 0 for Power Limit 1
- 1600, // PowerLimitMinimum
- 6200, // PowerLimitMaximum
- 1000, // TimeWindowMinimum
- 1000, // TimeWindowMaximum
- 200 // StepSize
- },
- Package () { // Power Limit 2
- 1, // PowerLimitIndex, 1 for Power Limit 2
- 8000, // PowerLimitMinimum
- 8000, // PowerLimitMaximum
- 1000, // TimeWindowMinimum
- 1000, // TimeWindowMaximum
- 1000 // StepSize
- }
- })
+ Return (\_SB.MPPC)
+ }
#ifdef DPTF_CPU_CRITICAL
Method (_CRT)
diff --git a/src/soc/intel/baytrail/acpi/southcluster.asl b/src/soc/intel/baytrail/acpi/southcluster.asl
index fac252f..5382182 100644
--- a/src/soc/intel/baytrail/acpi/southcluster.asl
+++ b/src/soc/intel/baytrail/acpi/southcluster.asl
@@ -198,10 +198,6 @@
Memory32Fixed(ReadWrite, MPHY_BASE_ADDRESS, MPHY_BASE_SIZE)
Memory32Fixed(ReadWrite, PUNIT_BASE_ADDRESS, PUNIT_BASE_SIZE)
Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
-#if CONFIG_CHROMEOS_RAMOOPS
- Memory32Fixed(ReadWrite, CONFIG_CHROMEOS_RAMOOPS_RAM_START,
- CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE)
-#endif
})
// Current Resource Settings
diff --git a/src/soc/intel/baytrail/baytrail/gpio.h b/src/soc/intel/baytrail/baytrail/gpio.h
index a5ba6a3..a431324 100644
--- a/src/soc/intel/baytrail/baytrail/gpio.h
+++ b/src/soc/intel/baytrail/baytrail/gpio.h
@@ -163,6 +163,13 @@
.use_sel = GPIO_USE_MMIO, \
.is_gpio = 1 }
+#define GPIO_INPUT_PU_20K \
+ { .pad_conf0 = PAD_PU_20K | PAD_PULL_UP | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_MMIO, \
+ .is_gpio = 1 }
+
#define GPIO_INPUT_PD_10K \
{ .pad_conf0 = PAD_PU_10K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
@@ -170,15 +177,22 @@
.use_sel = GPIO_USE_MMIO, \
.is_gpio = 1 }
+#define GPIO_INPUT_PD_20K \
+ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DOWN | PAD_CONFIG0_DEFAULT, \
+ .pad_conf1 = PAD_CONFIG1_DEFAULT, \
+ .pad_val = PAD_VAL_INPUT, \
+ .use_sel = GPIO_USE_MMIO, \
+ .is_gpio = 1 }
+
#define GPIO_INPUT_NOPU \
- { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
+ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT, \
.use_sel = GPIO_USE_MMIO, \
.is_gpio = 1 }
#define GPIO_INPUT_LEGACY_NOPU \
- { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
+ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT, \
.use_sel = GPIO_USE_LEGACY, \
@@ -187,7 +201,7 @@
/* Direct / dedicated IRQ input - pass signal directly to apic */
#define GPIO_DIRQ \
- { .pad_conf0 = PAD_PU_10K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
+ { .pad_conf0 = PAD_PU_20K | PAD_PULL_DISABLE | PAD_CONFIG0_DEFAULT \
| PAD_FUNC0 | PAD_IRQ_EN | PAD_TPE_IRQ | PAD_LEVEL_IRQ, \
.pad_conf1 = PAD_CONFIG1_DEFAULT, \
.pad_val = PAD_VAL_INPUT, }
@@ -220,13 +234,13 @@
.pad_val = PAD_VAL_DEFAULT }
/* Default functional configs -- no PU */
-#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 10K)
-#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 10K)
-#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 10K)
-#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 10K)
-#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 10K)
-#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 10K)
-#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 10K)
+#define GPIO_FUNC0 GPIO_FUNC(0, PULL_DISABLE, 20K)
+#define GPIO_FUNC1 GPIO_FUNC(1, PULL_DISABLE, 20K)
+#define GPIO_FUNC2 GPIO_FUNC(2, PULL_DISABLE, 20K)
+#define GPIO_FUNC3 GPIO_FUNC(3, PULL_DISABLE, 20K)
+#define GPIO_FUNC4 GPIO_FUNC(4, PULL_DISABLE, 20K)
+#define GPIO_FUNC5 GPIO_FUNC(5, PULL_DISABLE, 20K)
+#define GPIO_FUNC6 GPIO_FUNC(6, PULL_DISABLE, 20K)
/* ACPI GPIO routing. Assume everything is externally pulled and negative edge
* triggered. SCI implies WAKE, but WAKE doesn't imply SCI. */
@@ -265,9 +279,9 @@
/* Common default GPIO settings */
#define GPIO_INPUT GPIO_INPUT_NOPU
#define GPIO_INPUT_LEGACY GPIO_INPUT_LEGACY_NOPU
-#define GPIO_INPUT_PU GPIO_INPUT_PU_10K
-#define GPIO_INPUT_PD GPIO_INPUT_PD_10K
-#define GPIO_NC GPIO_INPUT_PU_10K
+#define GPIO_INPUT_PU GPIO_INPUT_PU_20K
+#define GPIO_INPUT_PD GPIO_INPUT_PD_20K
+#define GPIO_NC GPIO_INPUT_PU_20K
#define GPIO_DEFAULT GPIO_FUNC0
/* 16 DirectIRQs per supported bank */
@@ -320,7 +334,7 @@
const u8 gpio_f1_range_end;
};
-void setup_soc_gpios(struct soc_gpio_config *config);
+void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap);
/* This function is weak and can be overridden by a mainboard function. */
struct soc_gpio_config* mainboard_get_gpios(void);
diff --git a/src/soc/intel/baytrail/baytrail/iosf.h b/src/soc/intel/baytrail/baytrail/iosf.h
index f61582c..9da86f5 100644
--- a/src/soc/intel/baytrail/baytrail/iosf.h
+++ b/src/soc/intel/baytrail/baytrail/iosf.h
@@ -197,10 +197,18 @@
#define BUNIT_BMBOUND_HI 0x26
#define BUNIT_MMCONF_REG 0x27
/* The SMMRR registers define the SMM region in MiB granularity. */
+#define BUNIT_SMRCP 0x2b
+#define BUNIT_SMRRAC 0x2c
+#define BUNIT_SMRWAC 0x2d
#define BUNIT_SMRRL 0x2e
#define BUNIT_SMRRH 0x2f
# define BUNIT_SMRR_ENABLE (1 << 31)
+/* SA ID bits. */
+#define SAI_IA_UNTRUSTED (1 << 0)
+#define SAI_IA_SMM (1 << 2)
+#define SAI_IA_BOOT (1 << 4)
+
/*
* DUNIT Registers.
*/
diff --git a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
index fc18f0c..b5009e4b 100644
--- a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
+++ b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
@@ -28,7 +28,7 @@
#ifndef _MRC_WRAPPER_H_
#define _MRC_WRAPPER_H_
-#define MRC_PARAMS_VER 4
+#define MRC_PARAMS_VER 5
#define NUM_CHANNELS 2
@@ -55,12 +55,25 @@
PLATFORM_SETTINGS_FAIL = -4,
DIMM_DETECTION_FAILURE = -5,
MEMORY_CONFIG_FAILURE = -6,
+ INVALID_CPU_ODT_SETTING = -7,
+ INVALID_DRAM_ODT_SETTING = -8,
};
struct mrc_mainboard_params {
int dram_type;
int dram_info_location; /* DRAM_INFO_* */
- int weaker_odt_settings; /* Apply weaker on-die-termination settings. */
+ int dram_is_slotted; /* mobo has DRAM slots. */
+ /*
+ * The below ODT settings are only honored when !dram_is_slotted.
+ * Aditionally, weaker_odt_settings being non-zero causes
+ * cpu_odt_value to not be honored as weaker_odt_settings have a
+ * special training path.
+ */
+ int weaker_odt_settings;
+ /* Allowed settings: 60, 80, 100, 120, and 150. */
+ int cpu_odt_value;
+ /* Allowed settings: 60 and 120. */
+ int dram_odt_value;
int spd_addrs[NUM_CHANNELS];
void *dram_data[NUM_CHANNELS]; /* SPD or Timing specific data. */
} __attribute__((packed));
diff --git a/src/soc/intel/baytrail/baytrail/ramstage.h b/src/soc/intel/baytrail/baytrail/ramstage.h
index d2e7e62..a8b5fdc 100644
--- a/src/soc/intel/baytrail/baytrail/ramstage.h
+++ b/src/soc/intel/baytrail/baytrail/ramstage.h
@@ -21,10 +21,11 @@
#define _BAYTRAIL_RAMSTAGE_H_
#include <device/device.h>
+#include <chip.h>
/* The baytrail_init_pre_device() function is called prior to device
* initialization, but it's after console and cbmem has been reinitialized. */
-void baytrail_init_pre_device(void);
+void baytrail_init_pre_device(struct soc_intel_baytrail_config *config);
void baytrail_init_cpus(device_t dev);
void set_max_freq(void);
void southcluster_enable_dev(device_t dev);
diff --git a/src/soc/intel/baytrail/baytrail/smm.h b/src/soc/intel/baytrail/baytrail/smm.h
index e00944d..f147f73 100644
--- a/src/soc/intel/baytrail/baytrail/smm.h
+++ b/src/soc/intel/baytrail/baytrail/smm.h
@@ -37,7 +37,13 @@
#include <stdint.h>
void southcluster_smm_clear_state(void);
void southcluster_smm_enable_smi(void);
-void southcluster_smm_save_gpio_route(uint32_t route);
+void southcluster_smm_save_param(int param, uint32_t data);
#endif
+enum {
+ SMM_SAVE_PARAM_GPIO_ROUTE = 0,
+ SMM_SAVE_PARAM_PCIE_WAKE_ENABLE,
+ SMM_SAVE_PARAM_COUNT
+};
+
#endif /* _BAYTRAIL_SMM_H_ */
diff --git a/src/soc/intel/baytrail/chip.c b/src/soc/intel/baytrail/chip.c
index eedae39..ce9eb49 100644
--- a/src/soc/intel/baytrail/chip.c
+++ b/src/soc/intel/baytrail/chip.c
@@ -70,7 +70,7 @@
/* Called at BS_DEV_INIT_CHIPS time -- very early. Just after BS_PRE_DEVICE. */
static void soc_init(void *chip_info)
{
- baytrail_init_pre_device();
+ baytrail_init_pre_device(chip_info);
}
struct chip_operations soc_intel_baytrail_ops = {
diff --git a/src/soc/intel/baytrail/chip.h b/src/soc/intel/baytrail/chip.h
index 0a57885..256ed4f 100644
--- a/src/soc/intel/baytrail/chip.h
+++ b/src/soc/intel/baytrail/chip.h
@@ -26,9 +26,10 @@
#include <stdint.h>
struct soc_intel_baytrail_config {
- uint8_t sata_port_map;
- uint8_t sata_ahci;
- uint8_t ide_legacy_combined;
+ uint8_t enable_xdp_tap;
+ uint8_t sata_port_map;
+ uint8_t sata_ahci;
+ uint8_t ide_legacy_combined;
uint8_t clkreq_enable;
/* VR low power settings -- enable PS2 mode for gfx and core */
@@ -68,6 +69,9 @@
int scc_acpi_mode;
int lpe_acpi_mode;
+ /* Allow PCIe devices to wake system from suspend. */
+ int pcie_wake_enable;
+
/*
* Digital Port Hotplug Enable:
* 0x04 = Enabled, 2ms short pulse
diff --git a/src/soc/intel/baytrail/cpu.c b/src/soc/intel/baytrail/cpu.c
index 1bbcb08..97d1f04 100644
--- a/src/soc/intel/baytrail/cpu.c
+++ b/src/soc/intel/baytrail/cpu.c
@@ -30,6 +30,7 @@
#include <cpu/x86/smm.h>
#include <reg_script.h>
+#include <baytrail/iosf.h>
#include <baytrail/msr.h>
#include <baytrail/pattrs.h>
#include <baytrail/ramstage.h>
@@ -103,6 +104,8 @@
struct bus *cpu_bus = dev->link_list;
const struct pattrs *pattrs = pattrs_get();
struct mp_params mp_params;
+ uint32_t bsmrwac;
+ void *default_smm_area;
/* Set up MTRRs based on physical address size. */
x86_setup_fixed_mtrrs();
@@ -116,6 +119,16 @@
mp_params.num_records = ARRAY_SIZE(mp_steps);
mp_params.microcode_pointer = pattrs->microcode_patch;
+ default_smm_area = backup_default_smm_area();
+
+ /*
+ * Configure the BUNIT to allow dirty cache line evictions in non-SMM
+ * mode for the lines that were dirtied while in SMM mode. Otherwise
+ * the writes would be silently dropped.
+ */
+ bsmrwac = iosf_bunit_read(BUNIT_SMRWAC) | SAI_IA_UNTRUSTED;
+ iosf_bunit_write(BUNIT_SMRWAC, bsmrwac);
+
/* Set package MSRs */
reg_script_run(package_msr_script);
@@ -125,6 +138,8 @@
if (mp_init(cpu_bus, &mp_params)) {
printk(BIOS_ERR, "MP initialization failure.\n");
}
+
+ restore_default_smm_area(default_smm_area);
}
static void baytrail_core_init(device_t cpu)
diff --git a/src/soc/intel/baytrail/gpio.c b/src/soc/intel/baytrail/gpio.c
index 78aeb17..43e52ef 100644
--- a/src/soc/intel/baytrail/gpio.c
+++ b/src/soc/intel/baytrail/gpio.c
@@ -192,7 +192,7 @@
route_reg |= ROUTE_SCI << (2 * (i + 8));
}
}
- southcluster_smm_save_gpio_route(route_reg);
+ southcluster_smm_save_param(SMM_SAVE_PARAM_GPIO_ROUTE, route_reg);
}
static void setup_dirqs(const u8 dirq[GPIO_MAX_DIRQS],
@@ -214,7 +214,7 @@
}
}
-void setup_soc_gpios(struct soc_gpio_config *config)
+void setup_soc_gpios(struct soc_gpio_config *config, u8 enable_xdp_tap)
{
if (config) {
setup_gpios(config->ncore, &gpncore_bank);
@@ -228,6 +228,14 @@
setup_dirqs(*config->sus_dirq, &gpssus_bank);
}
+ /* Set on die termination feature with pull up value and
+ * drive the pad high for TAP_TDO and TAP_TMS
+ */
+ if (!enable_xdp_tap) {
+ printk(BIOS_DEBUG, "Tri-state TDO and TMS\n");
+ write32(GPSSUS_PAD_BASE + 0x2fc, 0xc);
+ write32(GPSSUS_PAD_BASE + 0x2cc, 0xc);
+ }
}
struct soc_gpio_config* __attribute__((weak)) mainboard_get_gpios(void)
diff --git a/src/soc/intel/baytrail/northcluster.c b/src/soc/intel/baytrail/northcluster.c
index e90c030..b119e24 100644
--- a/src/soc/intel/baytrail/northcluster.c
+++ b/src/soc/intel/baytrail/northcluster.c
@@ -22,6 +22,7 @@
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
+#include <vendorcode/google/chromeos/chromeos.h>
#include <baytrail/iomap.h>
#include <baytrail/iosf.h>
@@ -88,14 +89,8 @@
mmconf = iosf_bunit_read(BUNIT_MMCONF_REG) & ~((1 << 28) - 1);
mmio_resource(dev, BUNIT_MMCONF_REG, RES_IN_KiB(mmconf), 256 * 1024);
- /* 0 -> SMM_DEFAULT_BASE cacheable ram. */
- ram_resource(dev, index++, 0, RES_IN_KiB(SMM_DEFAULT_BASE));
- /* Default SMM region is cacheable but reserved for coreboot */
- reserved_ram_resource(dev, index++, RES_IN_KiB(SMM_DEFAULT_BASE),
- RES_IN_KiB(SMM_DEFAULT_SIZE));
-
- /* SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE - > 0xa0000 */
- base_k = RES_IN_KiB(SMM_DEFAULT_BASE + SMM_DEFAULT_SIZE);
+ /* 0 -> 0xa0000 */
+ base_k = RES_IN_KiB(0);
size_k = RES_IN_KiB(0xa0000) - base_k;
ram_resource(dev, index++, base_k, size_k);
@@ -132,11 +127,8 @@
mmio_resource(dev, index++, (0xa0000 >> 10), (0xc0000 - 0xa0000) >> 10);
reserved_ram_resource(dev, index++, (0xc0000 >> 10),
(0x100000 - 0xc0000) >> 10);
-#if CONFIG_CHROMEOS_RAMOOPS
- reserved_ram_resource(dev, index++,
- CONFIG_CHROMEOS_RAMOOPS_RAM_START >> 10,
- CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE >> 10);
-#endif
+
+ chromeos_reserve_ram_oops(dev, index++);
}
static struct device_operations nc_ops = {
diff --git a/src/soc/intel/baytrail/pcie.c b/src/soc/intel/baytrail/pcie.c
index ce76d6d..4498f43 100644
--- a/src/soc/intel/baytrail/pcie.c
+++ b/src/soc/intel/baytrail/pcie.c
@@ -27,6 +27,7 @@
#include <baytrail/pci_devs.h>
#include <baytrail/pcie.h>
#include <baytrail/ramstage.h>
+#include <baytrail/smm.h>
#include "chip.h"
@@ -174,10 +175,15 @@
static void byt_pcie_enable(device_t dev)
{
if (is_first_port(dev)) {
+ struct soc_intel_baytrail_config *config = dev->chip_info;
uint32_t reg = pci_read_config32(dev, PHYCTL2_IOSFBCTL);
pll_en_off = !!(reg & PLL_OFF_EN);
strpfusecfg = pci_read_config32(dev, STRPFUSECFG);
+
+ if (config && config->pcie_wake_enable)
+ southcluster_smm_save_param(
+ SMM_SAVE_PARAM_PCIE_WAKE_ENABLE, 1);
}
/* Check if device is enabled in strapping. */
diff --git a/src/soc/intel/baytrail/ramstage.c b/src/soc/intel/baytrail/ramstage.c
index e8f441f..96229307 100644
--- a/src/soc/intel/baytrail/ramstage.c
+++ b/src/soc/intel/baytrail/ramstage.c
@@ -184,9 +184,9 @@
s3_save_acpi_wake_source(gnvs);
}
-void baytrail_init_pre_device(void)
+void baytrail_init_pre_device(struct soc_intel_baytrail_config *config)
{
- struct soc_gpio_config *config;
+ struct soc_gpio_config *gpio_config;
fill_in_pattrs();
@@ -200,8 +200,8 @@
baytrail_run_reference_code();
/* Get GPIO initial states from mainboard */
- config = mainboard_get_gpios();
- setup_soc_gpios(config);
+ gpio_config = mainboard_get_gpios();
+ setup_soc_gpios(gpio_config, config->enable_xdp_tap);
baytrail_init_scc();
}
diff --git a/src/soc/intel/baytrail/smm.c b/src/soc/intel/baytrail/smm.c
index d4b3d58..daf759d 100644
--- a/src/soc/intel/baytrail/smm.c
+++ b/src/soc/intel/baytrail/smm.c
@@ -31,13 +31,12 @@
#include <baytrail/pmc.h>
#include <baytrail/smm.h>
-/* Save the gpio route register. The settings are committed from
- * southcluster_smm_enable_smi(). */
-static uint32_t gpio_route;
+/* Save settings which will be committed in SMI functions. */
+static uint32_t smm_save_params[SMM_SAVE_PARAM_COUNT];
-void southcluster_smm_save_gpio_route(uint32_t route)
+void southcluster_smm_save_param(int param, uint32_t data)
{
- gpio_route = route;
+ smm_save_params[param] = data;
}
void southcluster_smm_clear_state(void)
@@ -70,7 +69,7 @@
const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT;
const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI;
uint32_t alt_gpio_reg = 0;
- uint32_t route_reg = gpio_route;
+ uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE];
int i;
printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg);
@@ -92,10 +91,12 @@
void southcluster_smm_enable_smi(void)
{
+ uint16_t pm1_events = PWRBTN_EN | GBL_EN;
printk(BIOS_DEBUG, "Enabling SMIs.\n");
- /* Configure events Disable pcie wake. */
- enable_pm1(PWRBTN_EN | GBL_EN | PCIEXPWAK_DIS);
+ if (!smm_save_params[SMM_SAVE_PARAM_PCIE_WAKE_ENABLE])
+ pm1_events |= PCIEXPWAK_DIS;
+ enable_pm1(pm1_events);
disable_gpe(PME_B0_EN);
/* Set up the GPIO route. */
diff --git a/src/soc/intel/baytrail/southcluster.c b/src/soc/intel/baytrail/southcluster.c
index 49e4c91..261c95a 100644
--- a/src/soc/intel/baytrail/southcluster.c
+++ b/src/soc/intel/baytrail/southcluster.c
@@ -20,6 +20,7 @@
#include <stdint.h>
#include <arch/io.h>
+#include <arch/acpi.h>
#include <bootstate.h>
#include <cbmem.h>
#include <console/console.h>
@@ -29,6 +30,7 @@
#include <device/pci_ids.h>
#include <pc80/mc146818rtc.h>
#include <romstage_handoff.h>
+#include <drivers/uart/uart8250reg.h>
#include <baytrail/iomap.h>
#include <baytrail/irq.h>
@@ -144,6 +146,42 @@
rtc_init(rtc_fail);
}
+/*
+ * The UART hardware loses power while in suspend. Because of this the kernel
+ * can hang because it doesn't re-initialize serial ports it is using for
+ * consoles at resume time. The following function configures the UART
+ * if the hardware is enabled though it may not be the correct baud rate
+ * or configuration. This is definitely a hack, but it helps the kernel
+ * along.
+ */
+static void com1_configure_resume(device_t dev)
+{
+ const uint16_t port = 0x3f8;
+
+ /* Is the UART I/O port eanbled? */
+ if (!(pci_read_config32(dev, UART_CONT) & 1))
+ return;
+
+ /* Disable interrupts */
+ outb(0x0, port + UART8250_IER);
+
+ /* Enable FIFOs */
+ outb(UART8250_FCR_FIFO_EN, port + UART8250_FCR);
+
+ /* assert DTR and RTS so the other end is happy */
+ outb(UART8250_MCR_DTR | UART8250_MCR_RTS, port + UART8250_MCR);
+
+ /* DLAB on */
+ outb(UART8250_LCR_DLAB | 3, port + UART8250_LCR);
+
+ /* Set Baud Rate Divisor. 1 ==> 115200 Baud */
+ outb(1, port + UART8250_DLL);
+ outb(0, port + UART8250_DLM);
+
+ /* Set to 3 for 8N1 */
+ outb(3, port + UART8250_LCR);
+}
+
static void sc_init(device_t dev)
{
int i;
@@ -176,6 +214,9 @@
write32(gen_pmcon1,
read32(gen_pmcon1) & ~DIS_SLP_X_STRCH_SUS_UP);
}
+
+ if (acpi_slp_type == 3)
+ com1_configure_resume(dev);
}
/*