arch/x86: Drop Kconfig AP_SIPI_VECTOR
This was used to check romcc-built bootblock and romstage
agree about the location of 16-bit entrypoint. There was
no need to customize it as bootblock size requirement did
not grow. Just check for a fixed location at 4 GiB - 4 KiB.
With C_ENVIRONMENT_BOOTBLOCK we can have a proper symbol
for the purpose, since it appears in the same compilation
unit. It will adjust if C_ENV_BOOTBLOCK_SIZE changes.
Change-Id: I93f3c37e78ba587455c804de8c57e7e06832a81f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/src/cpu/intel/car/p4-netburst/cache_as_ram.S b/src/cpu/intel/car/p4-netburst/cache_as_ram.S
index bdce514..fda572d 100644
--- a/src/cpu/intel/car/p4-netburst/cache_as_ram.S
+++ b/src/cpu/intel/car/p4-netburst/cache_as_ram.S
@@ -23,7 +23,10 @@
/* Macro to access Local APIC registers at default base. */
#define LAPIC(x) $(LAPIC_DEFAULT_BASE | LAPIC_ ## x)
-#define START_IPI_VECTOR ((CONFIG_AP_SIPI_VECTOR >> 12) & 0xff)
+#if !IS_ENABLED(CONFIG_C_ENVIRONMENT_BOOTBLOCK)
+/* Fixed location, ASSERTED in failover.ld if it changes. */
+.set ap_sipi_vector_in_rom, 0xff
+#endif
#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
@@ -180,7 +183,8 @@
/* Send Start IPI to all excluding ourself. */
movl LAPIC(ICR), %edi
- movl $(LAPIC_DEST_ALLBUT | LAPIC_DM_STARTUP | START_IPI_VECTOR), %eax
+ movl $(LAPIC_DEST_ALLBUT | LAPIC_DM_STARTUP), %eax
+ orl $ap_sipi_vector_in_rom, %eax
1: movl %eax, (%edi)
movl $0x30, %ecx
2: pause