diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c
index 3c55946..11b765a 100644
--- a/src/southbridge/intel/bd82x6x/lpc.c
+++ b/src/southbridge/intel/bd82x6x/lpc.c
@@ -107,42 +107,37 @@
 static void pch_pirq_init(device_t dev)
 {
 	device_t irq_dev;
-	/* Get the chip configuration */
-	config_t *config = dev->chip_info;
-
-	pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing);
-	pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing);
-	pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing);
-	pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing);
-
-	pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing);
-	pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing);
-	pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing);
-	pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing);
-
-	/* Eric Biederman once said we should let the OS do this.
-	 * I am not so sure anymore he was right.
+	/* Interrupt 11 is not used by legacy devices and so can always be used for
+	   PCI interrupts. Full legacy IRQ routing is complicated and hard to
+	   get right. Fortunately all modern OS use MSI and so it's not that big of
+	   an issue anyway. Still we have to provide a reasonable default. Using
+	   interrupt 11 for it everywhere is a working default. ACPI-aware OS can
+	   move it to any interrupt and others will just leave them at default.
 	 */
+	const u8 pirq_routing = 11;
+
+	pci_write_config8(dev, PIRQA_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQB_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQC_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQD_ROUT, pirq_routing);
+
+	pci_write_config8(dev, PIRQE_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQF_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQG_ROUT, pirq_routing);
+	pci_write_config8(dev, PIRQH_ROUT, pirq_routing);
 
 	for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
-		u8 int_pin=0, int_line=0;
+		u8 int_pin=0;
 
 		if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
 			continue;
 
 		int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
 
-		switch (int_pin) {
-		case 1: /* INTA# */ int_line = config->pirqa_routing; break;
-		case 2: /* INTB# */ int_line = config->pirqb_routing; break;
-		case 3: /* INTC# */ int_line = config->pirqc_routing; break;
-		case 4: /* INTD# */ int_line = config->pirqd_routing; break;
-		}
-
-		if (!int_line)
+		if (int_pin == 0)
 			continue;
 
-		pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+		pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing);
 	}
 }