|author||Bora Guvendik <firstname.lastname@example.org>||Mon Dec 16 16:51:38 2019 -0800|
|committer||Patrick Georgi <email@example.com>||Thu Dec 19 17:48:15 2019 +0000|
storage/mmc: Fix wrong frequency setting for HS speed mode Emmc spec, JEDEC Standard No. 84-B51, section 18.104.22.168, selection flow of HS400 using Enhanced Strobe states that host should change frequency to ≤ 52MHz when switching to HS speed mode first. In current code, mmc_select_hs400() calls mmc_select_hs() to do this, however caps are not cleared, so when switching from HS200 to HS400, caps will still have DRVR_CAP_HS200, and mmc_recalculate_clock() will set 200Mhz instead of ≤ 52MHz. As a result, switching to HS400 will intermittently fail. BUG=b:140124451 TEST=Switch speed from HS200 to HS400 on WHL RVP. Change-Id: Ie639c7616105cca638417d7bc1db95b561afb7af Signed-off-by: Bora Guvendik <firstname.lastname@example.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37775 Reviewed-by: Selma Bensaid <email@example.com> Reviewed-by: Subrata Banik <firstname.lastname@example.org> Tested-by: build bot (Jenkins) <email@example.com>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case).
Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.