| chip northbridge/intel/fsp_sandybridge |
| |
| device cpu_cluster 0 on |
| chip cpu/intel/socket_BGA1284 |
| device lapic 0 on end |
| end |
| chip cpu/intel/fsp_model_206ax |
| # Magic APIC ID to locate this chip |
| device lapic 0xACAC off end |
| |
| register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) |
| register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) |
| register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) |
| |
| register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) |
| register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) |
| register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) |
| end |
| end |
| |
| device domain 0 on |
| device pci 00.0 on end # host bridge |
| device pci 01.0 on end # host bridge (slot 2 - black x16 slot (only x8)) |
| device pci 01.1 on end # host bridge (PCIe Ethernet controllers) |
| device pci 01.2 off end # host bridge (off - no additional bifurcation) |
| device pci 02.0 off end # vga controller |
| device pci 06.0 on end # host bridge (slot 1 - blue x4 slot) |
| |
| chip southbridge/intel/fsp_i89xx # Intel Series 89xx Cave Creek PCH |
| register "ide_legacy_combined" = "0x0" |
| register "sata_ahci" = "0x01" |
| register "sata_port_map" = "0x30" |
| register "c2_latency" = "1" |
| register "p_cnt_throttling_supported" = "0" |
| |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT |
| device pci 1c.0 on end # PCIe Port #1 (Slot #3 - x1) |
| device pci 1c.1 on end # PCIe Port #2 (Slot #4 - x1) |
| device pci 1c.2 on end # PCIe Port #3 (Slot #5 - x1) |
| device pci 1c.3 on end # PCIe Port #4 (Slot #6 - x1) |
| device pci 1d.0 on end # USB2 EHCI #1 |
| device pci 1f.0 on # LPC bridge |
| |
| # The top serial port is controlled by jumper |
| # J3a3. If the jumper is off, the serial |
| # port connector is routed to the SIO. If |
| # the jumper is on, the connector goes to |
| # the PCH's serial port. There is no way |
| # to tell in software which it's connected |
| # to. |
| |
| chip superio/intel/i8900 |
| device pnp 4e.4 on # Com3 |
| io 0x60 = 0x3E8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.5 on # Com2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 4e.6 on # Watchdog Timer |
| io 0x60 = 0x600 |
| irq 0x70 = 7 |
| end |
| end |
| |
| chip superio/winbond/wpcd376i |
| device pnp 2e.0 off end # FDC |
| device pnp 2e.1 off end # LPT |
| device pnp 2e.2 off end # IR |
| device pnp 2e.3 on # Com1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.4 off end # System wakeup |
| device pnp 2e.5 on # PS/2 mouse |
| irq 0x70 = 0x0C |
| end |
| device pnp 2e.6 on # PS/2 keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 0x01 |
| end |
| device pnp 2e.7 off end # GPIO |
| end |
| end |
| device pci 1f.2 on end # SATA Controller 1 |
| device pci 1f.3 on end # SMBus |
| device pci 1f.5 off end # SATA Controller 2 |
| device pci 1f.6 on end # Thermal |
| device pci 1f.7 on end # WDT |
| end |
| end |
| end |