google/scarlet: support INNOLUX P097PFG panel
Add INNOLUX P097PFG panel timing. According to Scalet schematic,
if GPIO3_D4 get low status, it will use INNOLUX P097PFG panel;
if GPIO3_D4 get high status, it will use KD097d04 panel.
Change-Id: I43fa5d859a9a529a84c58a953b37d03953ce648a
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/22780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 1a24862..1212ad5 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -534,12 +534,48 @@
.vspw = 2,
};
+const struct mipi_panel_data inx097pfg_panel = {
+ .mipi_num = 2,
+ .format = MIPI_DSI_FMT_RGB888,
+ .lanes = 8,
+ .display_on_udelay = 120000,
+ .video_mode_udelay = 5000,
+};
+
+static const struct edid_mode inx097pfg_edid_mode = {
+ .name = "1536x2048@60Hz",
+ .pixel_clock = 220000,
+ .refresh = 60,
+ .ha = 1536,
+ .hbl = 224,
+ .hso = 100,
+ .hspw = 24,
+ .va = 2048,
+ .vbl = 38,
+ .vso = 18,
+ .vspw = 2,
+};
+
const struct mipi_panel_data *mainboard_get_mipi_mode
(struct edid_mode *edid_mode)
{
- memcpy(edid_mode, &kd097d04_edid_mode, sizeof(struct edid_mode));
-
- return &kd097d04_panel;
+ switch (sku_id()) {
+ case 0:
+ case 2:
+ case 4:
+ case 6:
+ memcpy(edid_mode, &inx097pfg_edid_mode,
+ sizeof(struct edid_mode));
+ return &inx097pfg_panel;
+ case 1:
+ case 3:
+ case 5:
+ case 7:
+ default:
+ memcpy(edid_mode, &kd097d04_edid_mode,
+ sizeof(struct edid_mode));
+ return &kd097d04_panel;
+ }
}
static void mainboard_enable(device_t dev)