inteltool: Model 0xf2x, ICH5, i865 support.

Add support for dumping the MSRs on model_f2x and dumping GPIOs and PM
registers on ICH5. Add ICH5 and i865 to the supported chips list.
Enable the dumping of BAR6 on i865.

Sample output:

  Disabling memory access:
  $ sudo setpci -s 6.0 0x04.b=0x0
  
  $ sudo ./inteltool -m | head -n 9
  Intel CPU: Processor Type: 0, Family f, Model 2, Stepping 7
  Intel Northbridge: 8086:2570 (i865)
  Intel Southbridge: 8086:24d0 (ICH5)
  
  ============= MCHBAR ============
  
  Access to BAR6 is currently disabled, attempting to enable.
  Enabled successfully.
  BAR6 = 0xfecf0000 (MEM)

Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/util/inteltool/pcie.c b/util/inteltool/pcie.c
index 2c0f6a4..1ca57b6 100644
--- a/util/inteltool/pcie.c
+++ b/util/inteltool/pcie.c
@@ -55,7 +55,8 @@
 	case PCI_DEVICE_ID_INTEL_82810DC:
 	case PCI_DEVICE_ID_INTEL_82810E_MC:
 	case PCI_DEVICE_ID_INTEL_82830M:
-		printf("This northbrigde does not have EPBAR.\n");
+	case PCI_DEVICE_ID_INTEL_82865:
+		printf("This northbridge does not have EPBAR.\n");
 		return 1;
 	default:
 		printf("Error: Dumping EPBAR on this northbridge is not (yet) supported.\n");
@@ -112,7 +113,8 @@
 	case PCI_DEVICE_ID_INTEL_82810:
 	case PCI_DEVICE_ID_INTEL_82810DC:
 	case PCI_DEVICE_ID_INTEL_82810E_MC:
-		printf("This northbrigde does not have DMIBAR.\n");
+	case PCI_DEVICE_ID_INTEL_82865:
+		printf("This northbridge does not have DMIBAR.\n");
 		return 1;
 	case PCI_DEVICE_ID_INTEL_X58:
 		dmibar_phys = pci_read_long(nb, 0x50) & 0xfffff000;
@@ -174,7 +176,8 @@
 	case PCI_DEVICE_ID_INTEL_82810:
 	case PCI_DEVICE_ID_INTEL_82810DC:
 	case PCI_DEVICE_ID_INTEL_82810E_MC:
-		printf("Error: This northbrigde does not have PCIEXBAR.\n");
+	case PCI_DEVICE_ID_INTEL_82865:
+		printf("Error: This northbridge does not have PCIEXBAR.\n");
 		return 1;
 	default:
 		printf("Error: Dumping PCIEXBAR on this northbridge is not (yet) supported.\n");
@@ -245,5 +248,3 @@
 
 	return 0;
 }
-
-