autoport: Write autoport together with porting guide for sandy/ivybridge.
This should be able to generate bootable ports for sandy/ivy, possible with
minor fixes. Howto is in readme.md
Change-Id: Ia126cf0939ef2dc2cdbb7ea100d2b63ea6b02f28
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7131
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
diff --git a/util/autoport/azalia.go b/util/autoport/azalia.go
new file mode 100644
index 0000000..2ee60d7
--- /dev/null
+++ b/util/autoport/azalia.go
@@ -0,0 +1,64 @@
+package main
+
+import (
+ "fmt"
+ "sort"
+)
+
+type azalia struct {
+}
+
+func (i azalia) Scan(ctx Context, addr PCIDevData) {
+ az := Create(ctx, "hda_verb.c")
+ defer az.Close()
+
+ az.WriteString(
+ `#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+`)
+
+ for _, codec := range ctx.InfoSource.GetAzaliaCodecs() {
+ fmt.Fprintf(az, "\t0x%08x, /* Codec Vendor / Device ID: %s */\n",
+ codec.VendorID, codec.Name)
+ fmt.Fprintf(az, "\t0x%08x, /* Subsystem ID */\n",
+ codec.SubsystemID)
+ fmt.Fprintf(az, "\n\t0x%08x, /* Number of 4 dword sets */\n",
+ len(codec.PinConfig)+1)
+ fmt.Fprintf(az, "\t/* NID 0x01: Subsystem ID. */\n")
+ fmt.Fprintf(az, "\tAZALIA_SUBVENDOR(0x%x, 0x%08x),\n",
+ codec.CodecNo, codec.SubsystemID)
+
+ keys := []int{}
+ for nid, _ := range codec.PinConfig {
+ keys = append(keys, nid)
+ }
+
+ sort.Ints(keys)
+
+ for _, nid := range keys {
+ fmt.Fprintf(az, "\n\t/* NID 0x%02x. */\n", nid)
+ fmt.Fprintf(az, "\tAZALIA_PIN_CFG(0x%x, 0x%02x, 0x%08x),\n",
+ codec.CodecNo, nid, codec.PinConfig[nid])
+ }
+ }
+
+ az.WriteString(
+ `};
+
+const u32 pc_beep_verbs[0] = {};
+
+AZALIA_ARRAY_SIZES;
+`)
+
+ PutPCIDev(addr, "Audio controller")
+}
+
+func init() {
+ /* I82801GX/I945 */
+ RegisterPCI(0x8086, 0x27d8, azalia{})
+ /* BD82X6X/sandybridge */
+ RegisterPCI(0x8086, 0x1c20, azalia{})
+ /* C216/ivybridge */
+ RegisterPCI(0x8086, 0x1e20, azalia{})
+}
diff --git a/util/autoport/bd82x6x.go b/util/autoport/bd82x6x.go
new file mode 100644
index 0000000..91538bd
--- /dev/null
+++ b/util/autoport/bd82x6x.go
@@ -0,0 +1,456 @@
+package main
+
+import (
+ "fmt"
+ "os"
+)
+
+type bd82x6x struct {
+ variant string
+ node *DevTreeNode
+}
+
+func (b bd82x6x) writeGPIOSet(ctx Context, sb *os.File,
+ val uint32, set uint, partno int) {
+
+ max := uint(32)
+ if set == 3 {
+ max = 12
+ }
+
+ bits := [6][2]string{
+ {"GPIO_MODE_NATIVE", "GPIO_MODE_GPIO"},
+ {"GPIO_DIR_OUTPUT", "GPIO_DIR_INPUT"},
+ {"GPIO_LEVEL_LOW", "GPIO_LEVEL_HIGH"},
+ {"GPIO_RESET_PWROK", "GPIO_RESET_RSMRST"},
+ {"GPIO_NO_INVERT", "GPIO_INVERT"},
+ {"GPIO_NO_BLINK", "GPIO_BLINK"},
+ }
+
+ for i := uint(0); i < max; i++ {
+ fmt.Fprintf(sb, " .gpio%d = %s,\n",
+ (set-1)*32+i,
+ bits[partno][(val>>i)&1])
+ }
+}
+
+func (b bd82x6x) GPIO(ctx Context, inteltool InteltoolData) {
+ gpio := Create(ctx, "gpio.c")
+ defer gpio.Close()
+
+ AddROMStageFile("gpio.c", "")
+
+ gpio.WriteString(`#include "southbridge/intel/bd82x6x/gpio.h"
+`)
+
+ adresses := [3][6]int{
+ {0x00, 0x04, 0x0c, 0x60, 0x2c, 0x18},
+ {0x30, 0x34, 0x38, 0x64, -1, -1},
+ {0x40, 0x44, 0x48, 0x68, -1, -1},
+ }
+
+ for set := 1; set <= 3; set++ {
+ for partno, part := range []string{"mode", "direction", "level", "reset", "invert", "blink"} {
+ addr := adresses[set-1][partno]
+ if addr < 0 {
+ continue
+ }
+ fmt.Fprintf(gpio, "const struct pch_gpio_set%d pch_gpio_set%d_%s = {\n",
+ set, set, part)
+
+ b.writeGPIOSet(ctx, gpio, inteltool.GPIO[uint16(addr)], uint(set), partno)
+ gpio.WriteString("};\n\n")
+ }
+ }
+
+ gpio.WriteString(`const struct pch_gpio_map mainboard_gpio_map = {
+ .set1 = {
+ .mode = &pch_gpio_set1_mode,
+ .direction = &pch_gpio_set1_direction,
+ .level = &pch_gpio_set1_level,
+ .blink = &pch_gpio_set1_blink,
+ .invert = &pch_gpio_set1_invert,
+ .reset = &pch_gpio_set1_reset,
+ },
+ .set2 = {
+ .mode = &pch_gpio_set2_mode,
+ .direction = &pch_gpio_set2_direction,
+ .level = &pch_gpio_set2_level,
+ .reset = &pch_gpio_set2_reset,
+ },
+ .set3 = {
+ .mode = &pch_gpio_set3_mode,
+ .direction = &pch_gpio_set3_direction,
+ .level = &pch_gpio_set3_level,
+ .reset = &pch_gpio_set3_reset,
+ },
+};
+`)
+}
+
+func (b bd82x6x) IsPCIeHotplug(ctx Context, port int) bool {
+ portDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x1c, Func: port}]
+ if !ok {
+ return false
+ }
+ return (portDev.ConfigDump[0xdb] & (1 << 6)) != 0
+}
+
+func ich9GetFlashSize(ctx Context) {
+ inteltool := ctx.InfoSource.GetInteltool()
+ switch (inteltool.RCBA[0x3410] >> 10) & 3 {
+ /* SPI. All boards I've seen with sandy/ivy use SPI. */
+ case 3:
+ ROMProtocol = "SPI"
+ highflkb := uint32(0)
+ for reg := uint16(0); reg < 5; reg++ {
+ fl := (inteltool.RCBA[0x3854+4*reg] >> 16) & 0x1fff
+ flkb := fl << 2
+ if flkb > highflkb {
+ highflkb = flkb
+ }
+ }
+ ROMSizeKB = int(highflkb)
+ /* Shared with ME. Flashrom is unable to handle it. */
+ FlashROMSupport = "n"
+ }
+}
+
+func (b bd82x6x) GetGPIOHeader() string {
+ return "southbridge/intel/bd82x6x/pch.h"
+}
+
+func (b bd82x6x) EnableGPE(in int) {
+ b.node.Registers[fmt.Sprintf("gpi%d_routing", in)] = "2"
+}
+
+func (b bd82x6x) EncodeGPE(in int) int {
+ return in + 0x10
+}
+
+func (b bd82x6x) DecodeGPE(in int) int {
+ return in - 0x10
+}
+
+func (b bd82x6x) NeedRouteGPIOManually() {
+ b.node.Comment += ", FIXME: set gpiX_routing for EC support"
+}
+
+func (b bd82x6x) Scan(ctx Context, addr PCIDevData) {
+
+ SouthBridge = &b
+
+ inteltool := ctx.InfoSource.GetInteltool()
+ b.GPIO(ctx, inteltool)
+
+ KconfigBool["SOUTHBRIDGE_INTEL_"+b.variant] = true
+ KconfigBool["SERIRQ_CONTINUOUS_MODE"] = true
+ KconfigInt["USBDEBUG_HCD_INDEX"] = 2
+ KconfigComment["USBDEBUG_HCD_INDEX"] = "FIXME: check this"
+ dmi := ctx.InfoSource.GetDMI()
+ if dmi.Vendor == "LENOVO" {
+ KconfigInt["DRAM_RESET_GATE_GPIO"] = 10
+ } else {
+ KconfigInt["DRAM_RESET_GATE_GPIO"] = 60
+ }
+ KconfigComment["DRAM_RESET_GATE_GPIO"] = "FIXME: check this"
+
+ /* Not strictly speaking correct. These subsys/subvendor referer to PCI devices.
+ But most systems don't have any of those. But the config needs to be set
+ nevertheless. So set it to southbridge subsys/subvendor. */
+ KconfigHex["MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID"] = uint32(GetLE16(addr.ConfigDump[0x2c:0x2e]))
+ KconfigHex["MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID"] = uint32(GetLE16(addr.ConfigDump[0x2e:0x30]))
+
+ ich9GetFlashSize(ctx)
+
+ DSDTDefines = append(DSDTDefines,
+ DSDTDefine{
+ Key: "BRIGHTNESS_UP",
+ Value: "\\_SB.PCI0.GFX0.INCB",
+ },
+ DSDTDefine{
+ Key: "BRIGHTNESS_DOWN",
+ Value: "\\_SB.PCI0.GFX0.DECB",
+ },
+ DSDTDefine{
+ Key: "ACPI_VIDEO_DEVICE",
+ Value: "\\_SB.PCI0.GFX0",
+ })
+
+ /* SPI init */
+ MainboardIncludes = append(MainboardIncludes, "southbridge/intel/bd82x6x/pch.h")
+ /* FIXME:XX Move this to runtime. */
+ for _, addr := range []uint16{0x38c8, 0x38c4, 0x38c0} {
+ MainboardInit += fmt.Sprintf("\tRCBA32(0x%04x) = 0x%08x;\n", addr, inteltool.RCBA[addr])
+ }
+
+ FADT := ctx.InfoSource.GetACPI()["FACP"]
+
+ pcieHotplugMap := "{ "
+
+ for port := 0; port < 7; port++ {
+ if b.IsPCIeHotplug(ctx, port) {
+ pcieHotplugMap += "1, "
+ } else {
+ pcieHotplugMap += "0, "
+ }
+ }
+
+ if b.IsPCIeHotplug(ctx, 7) {
+ pcieHotplugMap += "1 }"
+ } else {
+ pcieHotplugMap += "0 }"
+ }
+
+ cur := DevTreeNode{
+ Chip: "southbridge/intel/bd82x6x",
+ Comment: "Intel Series 6 Cougar Point PCH",
+
+ Registers: map[string]string{
+ "sata_interface_speed_support": "0x3",
+ "gen1_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x84:0x88]),
+ "gen2_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x88:0x8c]),
+ "gen3_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x8c:0x90]),
+ "gen4_dec": FormatHexLE32(PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 0}].ConfigDump[0x90:0x94]),
+ "pcie_port_coalesce": "1",
+ "pcie_hotplug_map": pcieHotplugMap,
+
+ "sata_port_map": fmt.Sprintf("0x%x", PCIMap[PCIAddr{Bus: 0, Dev: 0x1f, Func: 2}].ConfigDump[0x92]&0x3f),
+
+ "p_cnt_throttling_supported": (FormatBool(FADT[104] == 1 && FADT[105] == 3)),
+ "c2_latency": FormatHexLE16(FADT[96:98]),
+ "docking_supported": (FormatBool((FADT[113] & (1 << 1)) != 0)),
+ },
+ PCISlots: []PCISlot{
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x14, Func: 0}, writeEmpty: false, additionalComment: "USB 3.0 Controller"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 0}, writeEmpty: true, additionalComment: "Management Engine Interface 1"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 1}, writeEmpty: true, additionalComment: "Management Engine Interface 2"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 2}, writeEmpty: true, additionalComment: "Management Engine IDE-R"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x16, Func: 3}, writeEmpty: true, additionalComment: "Management Engine KT"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x19, Func: 0}, writeEmpty: true, additionalComment: "Intel Gigabit Ethernet"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1a, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #2"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1b, Func: 0}, writeEmpty: true, additionalComment: "High Definition Audio"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 0}, writeEmpty: true, additionalComment: "PCIe Port #1"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 1}, writeEmpty: true, additionalComment: "PCIe Port #2"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 2}, writeEmpty: true, additionalComment: "PCIe Port #3"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 3}, writeEmpty: true, additionalComment: "PCIe Port #4"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 4}, writeEmpty: true, additionalComment: "PCIe Port #5"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 5}, writeEmpty: true, additionalComment: "PCIe Port #6"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1d, Func: 0}, writeEmpty: true, additionalComment: "USB2 EHCI #1"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1e, Func: 0}, writeEmpty: true, additionalComment: "PCI bridge"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 0}, writeEmpty: true, additionalComment: "LPC bridge"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 2}, writeEmpty: true, additionalComment: "SATA Controller 1"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 3}, writeEmpty: true, additionalComment: "SMBus"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 5}, writeEmpty: true, additionalComment: "SATA Controller 2"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1f, Func: 6}, writeEmpty: true, additionalComment: "Thermal"},
+ },
+ }
+
+ b.node = &cur
+
+ xhciDev, ok := PCIMap[PCIAddr{Bus: 0, Dev: 0x14, Func: 0}]
+
+ if ok {
+ cur.Registers["xhci_switchable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xd4:0xd8])
+ cur.Registers["superspeed_capable_ports"] = FormatHexLE32(xhciDev.ConfigDump[0xdc:0xe0])
+ cur.Registers["xhci_overcurrent_mapping"] = FormatHexLE32(xhciDev.ConfigDump[0xc0:0xc4])
+ }
+
+ PutPCIChip(addr, cur)
+ PutPCIDevParent(addr, "PCI-LPC bridge", "lpc")
+
+ DSDTIncludes = append(DSDTIncludes, DSDTInclude{
+ File: "southbridge/intel/bd82x6x/acpi/platform.asl",
+ })
+ DSDTIncludes = append(DSDTIncludes, DSDTInclude{
+ File: "southbridge/intel/bd82x6x/acpi/globalnvs.asl",
+ Comment: "global NVS and variables",
+ })
+ DSDTIncludes = append(DSDTIncludes, DSDTInclude{
+ File: "southbridge/intel/bd82x6x/acpi/sleepstates.asl",
+ })
+ DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{
+ File: "southbridge/intel/bd82x6x/acpi/pch.asl",
+ })
+
+ sb := Create(ctx, "early_southbridge.c")
+ defer sb.Close()
+ AddROMStageFile("early_southbridge.c", "")
+ sb.WriteString(`#include <stdint.h>
+#include <string.h>
+#include <lib.h>
+#include <timestamp.h>
+#include <arch/byteorder.h>
+#include <arch/io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <arch/acpi.h>
+#include <console/console.h>
+#include "northbridge/intel/sandybridge/sandybridge.h"
+#include "northbridge/intel/sandybridge/raminit_native.h"
+#include "southbridge/intel/bd82x6x/pch.h"
+#include "southbridge/intel/bd82x6x/gpio.h"
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+
+void pch_enable_lpc(void)
+{
+`)
+ RestorePCI16Simple(sb, addr, 0x82)
+ RestorePCI32Simple(sb, addr, 0x84)
+ RestorePCI32Simple(sb, addr, 0x88)
+ RestorePCI32Simple(sb, addr, 0x8c)
+ RestorePCI32Simple(sb, addr, 0x90)
+
+ RestorePCI16Simple(sb, addr, 0x80)
+
+ RestorePCI32Simple(sb, addr, 0xac)
+
+ sb.WriteString(`}
+
+void rcba_config(void)
+{
+ /* Disable devices. */
+`)
+ RestoreRCBA32(sb, inteltool, 0x3414)
+ RestoreRCBA32(sb, inteltool, 0x3418)
+
+ sb.WriteString("\n}\n")
+
+ sb.WriteString("const struct southbridge_usb_port mainboard_usb_ports[] = {\n")
+
+ currentMap := map[uint32]int{
+ 0x20000153: 0,
+ 0x20000f57: 1,
+ 0x2000055b: 2,
+ 0x20000f51: 3,
+ 0x2000094a: 4,
+ }
+
+ for port := uint(0); port < 14; port++ {
+ var pinmask uint32
+ OCPin := -1
+ if port < 8 {
+ pinmask = inteltool.RCBA[0x35a0]
+ } else {
+ pinmask = inteltool.RCBA[0x35a4]
+ }
+ for pin := uint(0); pin < 4; pin++ {
+ if ((pinmask >> ((port % 8) + 8*pin)) & 1) != 0 {
+ OCPin = int(pin)
+ if port >= 8 {
+ OCPin += 4
+ }
+ }
+ }
+ fmt.Fprintf(sb, "\t{ %d, %d, %d },\n",
+ ((inteltool.RCBA[0x359c]>>port)&1)^1,
+ currentMap[inteltool.RCBA[uint16(0x3500+4*port)]],
+ OCPin)
+ }
+ sb.WriteString("};\n")
+
+ guessedMap := GuessSPDMap(ctx)
+
+ sb.WriteString(`
+/* FIXME: Put proper SPD map here. */
+void mainboard_get_spd(spd_raw_data *spd)
+{
+`)
+ for i, spd := range guessedMap {
+ fmt.Fprintf(sb, "\tread_spd(&spd[%d], 0x%02x);\n", i, spd)
+ }
+ sb.WriteString("}\n")
+
+ gnvs := Create(ctx, "gnvs.c")
+ defer gnvs.Close()
+
+ gnvs.WriteString(`#include <southbridge/intel/bd82x6x/nvs.h>
+
+/* FIXME: check this function. */
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ /* Disable USB ports in S3 by default */
+ gnvs->s3u0 = 0;
+ gnvs->s3u1 = 0;
+
+ /* Disable USB ports in S5 by default */
+ gnvs->s5u0 = 0;
+ gnvs->s5u1 = 0;
+
+ // the lid is open by default.
+ gnvs->lids = 1;
+
+ gnvs->tcrt = 100;
+ gnvs->tpsv = 90;
+}
+`)
+
+ AddRAMStageFile("gnvs.c", "")
+}
+
+func init() {
+ /* BD82X6X LPC */
+ for _, id := range []uint16{
+ 0x1c46, 0x1c47, 0x1c49, 0x1c4a,
+ 0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e,
+ 0x1c4f, 0x1c50, 0x1c52, 0x1c54,
+ 0x1c56, 0x1c5c,
+ } {
+ RegisterPCI(0x8086, id, bd82x6x{variant: "BD82X6X"})
+ }
+
+ /* C216 LPC */
+ for _, id := range []uint16{
+ 0x1e55, 0x1e57, 0x1e5d, 0x1e5e, 0x1e5f, 0x1e49,
+ } {
+ RegisterPCI(0x8086, id, bd82x6x{variant: "C216"})
+ }
+
+ /* PCIe bridge */
+ for _, id := range []uint16{
+ 0x1c10, 0x1c12, 0x1c14, 0x1c16,
+ 0x1c18, 0x1c1a, 0x1c1c, 0x1c1e,
+ 0x1e10, 0x1e12, 0x1e14, 0x1e16,
+ 0x1e18, 0x1e1a, 0x1e1c, 0x1e1e,
+ } {
+ RegisterPCI(0x8086, id, GenericPCI{})
+ }
+
+ /* SMBus controller */
+ RegisterPCI(0x8086, 0x1c22, GenericPCI{MissingParent: "smbus"})
+ RegisterPCI(0x8086, 0x1e22, GenericPCI{MissingParent: "smbus"})
+
+ /* SATA */
+ for _, id := range []uint16{
+ 0x1c00, 0x1c01, 0x1c02, 0x1c03,
+ 0x1e00, 0x1e01, 0x1e02, 0x1e03,
+ } {
+ RegisterPCI(0x8086, id, GenericPCI{})
+ }
+
+ /* EHCI */
+ for _, id := range []uint16{
+ 0x1c26, 0x1c2d, 0x1e26, 0x1e2d,
+ } {
+ RegisterPCI(0x8086, id, GenericPCI{})
+ }
+
+ /* XHCI */
+ RegisterPCI(0x8086, 0x1e31, GenericPCI{})
+
+ /* ME and children */
+ for _, id := range []uint16{
+ 0x1c3a, 0x1c3b, 0x1c3c, 0x1c3d,
+ 0x1e3a, 0x1e3b, 0x1e3c, 0x1e3d,
+ } {
+ RegisterPCI(0x8086, id, GenericPCI{})
+ }
+
+ /* Ethernet */
+ RegisterPCI(0x8086, 0x1502, GenericPCI{})
+
+}
diff --git a/util/autoport/ec_fixme.go b/util/autoport/ec_fixme.go
new file mode 100644
index 0000000..589a101
--- /dev/null
+++ b/util/autoport/ec_fixme.go
@@ -0,0 +1,85 @@
+package main
+
+import "fmt"
+
+func FIXMEEC(ctx Context) {
+ ap := Create(ctx, "acpi/platform.asl")
+ defer ap.Close()
+
+ hasKeyboard := IsIOPortUsedBy(ctx, 0x60, "keyboard")
+
+ sbGPE := GuessECGPE(ctx)
+ var GPEUnsure bool
+ if sbGPE < 0 {
+ sbGPE = SouthBridge.EncodeGPE(1)
+ GPEUnsure = true
+ SouthBridge.NeedRouteGPIOManually()
+ } else {
+ GPEUnsure = false
+ SouthBridge.EnableGPE(SouthBridge.DecodeGPE(sbGPE))
+ }
+
+ ap.WriteString(
+ `Method(_WAK,1)
+{
+ /* FIXME: EC support */
+ Return(Package(){0,0})
+}
+
+Method(_PTS,1)
+{
+ /* FIXME: EC support */
+}
+`)
+
+ ecs := ctx.InfoSource.GetEC()
+ MainboardIncludes = append(MainboardIncludes, "ec/acpi/ec.h")
+
+ MainboardInit +=
+ ` /* FIXME: trim this down or remove if necessary */
+ {
+ int i;
+ const u8 dmp[256] = {`
+ for i := 0; i < 0x100; i++ {
+ if (i & 0xf) == 0 {
+ MainboardInit += fmt.Sprintf("\n\t\t\t/* %02x */ ", i)
+ }
+ MainboardInit += fmt.Sprintf("0x%02x,", ecs[i])
+ if (i & 0xf) != 0xf {
+ MainboardInit += " "
+ }
+ }
+ MainboardInit += "\n\t\t};\n"
+ MainboardInit += `
+ printk(BIOS_DEBUG, "Replaying EC dump ...");
+ for (i = 0; i < 256; i++)
+ ec_write (i, dmp[i]);
+ printk(BIOS_DEBUG, "done\n");
+ }
+`
+
+ si := Create(ctx, "acpi/superio.asl")
+ defer si.Close()
+
+ if hasKeyboard {
+ si.WriteString("#include <drivers/pc80/ps2_controller.asl>\n")
+ MainboardInit += fmt.Sprintf("\tpc_keyboard_init();\n")
+ MainboardIncludes = append(MainboardIncludes, "pc80/keyboard.h")
+ }
+
+ ec := Create(ctx, "acpi/ec.asl")
+ defer ec.Close()
+
+ ec.WriteString(`Device(EC)
+{
+ Name (_HID, EISAID("PNP0C09"))
+ Name (_UID, 0)
+`)
+ if GPEUnsure {
+ ec.WriteString("\t/* FIXME: Set GPE */\n")
+ ec.WriteString("\t/* Name (_GPE, ?) */\n")
+ } else {
+ fmt.Fprintf(ec, "\tName (_GPE, %d)\n", sbGPE)
+ }
+ ec.WriteString("/* FIXME: EC support */\n")
+}
diff --git a/util/autoport/ec_lenovo.go b/util/autoport/ec_lenovo.go
new file mode 100644
index 0000000..ab5e7ab
--- /dev/null
+++ b/util/autoport/ec_lenovo.go
@@ -0,0 +1,295 @@
+package main
+
+import "fmt"
+
+func LenovoEC(ctx Context) {
+ ap := Create(ctx, "acpi/platform.asl")
+ defer ap.Close()
+
+ wakeGPE := 13
+
+ sbGPE := GuessECGPE(ctx)
+ var GPE int
+ var GPEUnsure bool
+ if sbGPE < 0 {
+ sbGPE = SouthBridge.EncodeGPE(1)
+ GPE = 1
+ GPEUnsure = true
+ SouthBridge.NeedRouteGPIOManually()
+ } else {
+ GPE = SouthBridge.DecodeGPE(sbGPE)
+ GPEUnsure = false
+ }
+
+ SouthBridge.EnableGPE(wakeGPE)
+ SouthBridge.EnableGPE(GPE)
+
+ GPEDefine := DSDTDefine{
+ Key: "THINKPAD_EC_GPE",
+ }
+
+ GPEDefine.Value = fmt.Sprintf("%d", sbGPE)
+ if GPEUnsure {
+ GPEDefine.Comment = "FIXME: Check this"
+ }
+
+ DSDTDefines = append(DSDTDefines,
+ DSDTDefine{
+ Key: "EC_LENOVO_H8_ME_WORKAROUND",
+ Value: "1",
+ }, GPEDefine)
+
+ ap.WriteString(
+ `Method(_WAK,1)
+{
+ /* ME may not be up yet. */
+ Store (0, \_TZ.MEB1)
+ Store (0, \_TZ.MEB2)
+ Return(Package(){0,0})
+}
+
+Method(_PTS,1)
+{
+ \_SB.PCI0.LPCB.EC.RADI(0)
+}
+`)
+
+ si := Create(ctx, "acpi/superio.asl")
+ defer si.Close()
+
+ si.WriteString("#include <drivers/pc80/ps2_controller.asl>\n")
+
+ dock := Create(ctx, "dock.c")
+ defer dock.Close()
+
+ AddRAMStageFile("dock.c", "")
+
+ dock.WriteString(
+ `#include <ec/lenovo/h8/h8.h>
+
+void h8_mainboard_init_dock (void)
+{
+/* FIXME: fill this if needed. */
+}
+`)
+
+ /* FIXME:XX Move this to ec/lenovo. */
+ smi := Create(ctx, "smihandler.c")
+ defer smi.Close()
+
+ AddSMMFile("smihandler.c", "")
+
+ smi.WriteString(
+ `/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include <ec/acpi/ec.h>
+#include <ec/lenovo/h8/h8.h>
+#include <delay.h>
+#include <` + SouthBridge.GetGPIOHeader() + ">\n\n")
+
+ if GPEUnsure {
+ smi.WriteString("/* FIXME: check this */\n")
+ }
+ fmt.Fprintf(smi, "#define GPE_EC_SCI %d\n", GPE)
+
+ smi.WriteString("/* FIXME: check this */\n")
+ fmt.Fprintf(smi, "#define GPE_EC_WAKE %d\n", wakeGPE)
+
+ smi.WriteString(`
+static void mainboard_smm_init(void)
+{
+ printk(BIOS_DEBUG, "initializing SMI\n");
+ /* Enable 0x1600/0x1600 register pair */
+ ec_set_bit(0x00, 0x05);
+}
+
+int mainboard_io_trap_handler(int smif)
+{
+ static int smm_initialized;
+
+ if (!smm_initialized) {
+ mainboard_smm_init();
+ smm_initialized = 1;
+ }
+
+ return 0;
+}
+
+static void mainboard_smi_handle_ec_sci(void)
+{
+ u8 status = inb(EC_SC);
+ u8 event;
+
+ if (!(status & EC_SCI_EVT))
+ return;
+
+ event = ec_query();
+ printk(BIOS_DEBUG, "EC event %02x\n", event);
+}
+
+void mainboard_smi_gpi(u32 gpi_sts)
+{
+ if (gpi_sts & (1 << GPE_EC_SCI))
+ mainboard_smi_handle_ec_sci();
+}
+
+int mainboard_smi_apmc(u8 data)
+{
+ switch (data) {
+ case APM_CNT_ACPI_ENABLE:
+ /* use 0x1600/0x1604 to prevent races with userspace */
+ ec_set_ports(0x1604, 0x1600);
+ /* route EC_SCI to SCI */
+ gpi_route_interrupt(GPE_EC_SCI, GPI_IS_SCI);
+ /* discard all events, and enable attention */
+ ec_write(0x80, 0x01);
+ break;
+ case APM_CNT_ACPI_DISABLE:
+ /* we have to use port 0x62/0x66, as 0x1600/0x1604 doesn't
+ provide a EC query function */
+ ec_set_ports(0x66, 0x62);
+ /* route EC_SCI to SMI */
+ gpi_route_interrupt(GPE_EC_SCI, GPI_IS_SMI);
+ /* discard all events, and enable attention */
+ ec_write(0x80, 0x01);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ if (slp_typ == 3) {
+ u8 ec_wake = ec_read(0x32);
+ /* If EC wake events are enabled, enable wake on EC WAKE GPE. */
+ if (ec_wake & 0x14) {
+ /* Redirect EC WAKE GPE to SCI. */
+ gpi_route_interrupt(GPE_EC_WAKE, GPI_IS_SCI);
+ }
+ }
+}
+`)
+
+ ec := Create(ctx, "acpi/ec.asl")
+ defer ec.Close()
+
+ ec.WriteString("#include <ec/lenovo/h8/acpi/ec.asl>\n")
+
+ KconfigBool["EC_LENOVO_PMH7"] = true
+ KconfigBool["EC_LENOVO_H8"] = true
+
+ pmh := DevTreeNode{
+ Chip: "ec/lenovo/pmh7",
+ Registers: map[string]string{
+ "backlight_enable": "0x01",
+ "dock_event_enable": "0x01",
+ },
+ Children: []DevTreeNode{
+ DevTreeNode{
+ Chip: "pnp",
+ Comment: "dummy",
+ Dev: 0xff,
+ Func: 1,
+ },
+ },
+ }
+ PutChip("lpc", pmh)
+
+ ecs := ctx.InfoSource.GetEC()
+ h8 := DevTreeNode{
+ Chip: "ec/lenovo/h8",
+ Children: []DevTreeNode{
+ DevTreeNode{
+ Chip: "pnp",
+ Comment: "dummy",
+ Dev: 0xff,
+ Func: 2,
+ IOs: map[uint16]uint16{
+ 0x60: 0x62,
+ 0x62: 0x66,
+ 0x64: 0x1600,
+ 0x66: 0x1604,
+ },
+ },
+ },
+ Comment: "FIXME: has_keyboard_backlight, has_power_management_beeps, has_uwb",
+ Registers: map[string]string{
+ "config0": FormatHex8(ecs[0]),
+ "config1": FormatHex8(ecs[1]),
+ "config2": FormatHex8(ecs[2]),
+ "config3": FormatHex8(ecs[3]),
+ "beepmask0": FormatHex8(ecs[4]),
+ "beepmask1": FormatHex8(ecs[5]),
+ },
+ }
+ for i := 0; i < 0x10; i++ {
+ if ecs[0x10+i] != 0 {
+ h8.Registers[fmt.Sprintf("event%x_enable", i)] = FormatHex8(ecs[0x10+i])
+ }
+ }
+ PutChip("lpc", h8)
+
+ eeprom := DevTreeNode{
+ Chip: "drivers/i2c/at24rf08c",
+ Comment: "eeprom, 8 virtual devices, same chip",
+ Children: []DevTreeNode{
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x54,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x55,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x56,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x57,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x5c,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x5d,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x5e,
+ },
+ DevTreeNode{
+ Chip: "i2c",
+ Dev: 0x5f,
+ },
+ },
+ }
+ PutChip("smbus", eeprom)
+}
diff --git a/util/autoport/ec_none.go b/util/autoport/ec_none.go
new file mode 100644
index 0000000..9158734
--- /dev/null
+++ b/util/autoport/ec_none.go
@@ -0,0 +1,23 @@
+package main
+
+func NoEC(ctx Context) {
+ ap := Create(ctx, "acpi/platform.asl")
+ defer ap.Close()
+
+ ap.WriteString(
+ `Method(_WAK,1)
+{
+ Return(Package(){0,0})
+}
+
+Method(_PTS,1)
+{
+}
+`)
+
+ si := Create(ctx, "acpi/superio.asl")
+ defer si.Close()
+
+ ec := Create(ctx, "acpi/ec.asl")
+ defer ec.Close()
+}
diff --git a/util/autoport/log_maker.go b/util/autoport/log_maker.go
new file mode 100644
index 0000000..b991ea7
--- /dev/null
+++ b/util/autoport/log_maker.go
@@ -0,0 +1,88 @@
+package main
+
+import (
+ "io"
+ "io/ioutil"
+ "log"
+ "os"
+ "os/exec"
+ "strings"
+)
+
+func RunAndSave(output string, name string, arg ...string) {
+ cmd := exec.Command(name, arg...)
+
+ f, err := os.Create(output)
+ if err != nil {
+ log.Fatal(err)
+ }
+
+ cmd.Stdout = f
+ cmd.Stderr = f
+
+ err = cmd.Start()
+ if err != nil {
+ log.Fatal(err)
+ }
+ cmd.Wait()
+}
+
+func MakeLogs(outDir string) {
+ os.MkdirAll(outDir, 0700)
+ RunAndSave(outDir+"/lspci.log", "lspci", "-nnvvvxxxx")
+ RunAndSave(outDir+"/dmidecode.log", "dmidecode")
+ RunAndSave(outDir+"/acpidump.log", "acpidump")
+ /* FIXME:XX */
+ RunAndSave(outDir+"/inteltool.log", "../inteltool/inteltool", "-a")
+ RunAndSave(outDir+"/ectool.log", "../ectool/ectool", "-a")
+
+ SysDir := "/sys/class/sound/card0/"
+ files, _ := ioutil.ReadDir(SysDir)
+ for _, f := range files {
+ if (strings.HasPrefix(f.Name(), "hw") || strings.HasPrefix(f.Name(), "hdaudio")) && f.IsDir() {
+ in, err := os.Open(SysDir + f.Name() + "/init_pin_configs")
+ defer in.Close()
+ if err != nil {
+ log.Fatal(err)
+ }
+ out, err := os.Create(outDir + "/pin_" + strings.Replace(f.Name(), "hdaudio", "hw", -1))
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer out.Close()
+ io.Copy(out, in)
+ }
+ }
+
+ ProcDir := "/proc/asound/card0/"
+ files, _ = ioutil.ReadDir(ProcDir)
+ for _, f := range files {
+ if strings.HasPrefix(f.Name(), "codec#") && !f.IsDir() {
+ in, err := os.Open(ProcDir + f.Name())
+ defer in.Close()
+ if err != nil {
+ log.Fatal(err)
+ }
+ out, err := os.Create(outDir + "/" + f.Name())
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer out.Close()
+ io.Copy(out, in)
+ }
+ }
+
+ for _, fname := range []string{"cpuinfo", "ioports"} {
+ in, err := os.Open("/proc/" + fname)
+ defer in.Close()
+ if err != nil {
+ log.Fatal(err)
+ }
+ out, err := os.Create(outDir + "/" + fname + ".log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer out.Close()
+ io.Copy(out, in)
+ }
+}
diff --git a/util/autoport/log_reader.go b/util/autoport/log_reader.go
new file mode 100644
index 0000000..58f1182
--- /dev/null
+++ b/util/autoport/log_reader.go
@@ -0,0 +1,370 @@
+package main
+
+import (
+ "bufio"
+ "flag"
+ "fmt"
+ "log"
+ "os"
+ "strconv"
+ "strings"
+)
+
+type LogDevReader struct {
+ InputDirectory string
+ ACPITables map[string][]byte
+ EC []byte
+}
+
+func isXDigit(x uint8) bool {
+ if x >= '0' && x <= '9' {
+ return true
+ }
+ if x >= 'a' && x <= 'f' {
+ return true
+ }
+ if x >= 'A' && x <= 'F' {
+ return true
+ }
+ return false
+}
+
+type HexLine struct {
+ length uint
+ values [16]byte
+ start uint
+}
+
+func (l *LogDevReader) ReadHexLine(line string) (hex HexLine) {
+ hex.start = 0
+ line = strings.Trim(line, " ")
+ fmt.Sscanf(line, "%x:", &hex.start)
+ ll, _ := fmt.Sscanf(line, "%x: %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x", &hex.start,
+ &hex.values[0], &hex.values[1], &hex.values[2],
+ &hex.values[3], &hex.values[4], &hex.values[5],
+ &hex.values[6], &hex.values[7], &hex.values[8],
+ &hex.values[9], &hex.values[10], &hex.values[11],
+ &hex.values[12], &hex.values[13], &hex.values[14],
+ &hex.values[15])
+ hex.length = uint(ll - 1)
+ return
+}
+
+func (l *LogDevReader) AssignHexLine(inp string, target []byte) []byte {
+ hex := l.ReadHexLine(inp)
+ if hex.start+hex.length > uint(len(target)) {
+ target = target[0 : hex.start+hex.length]
+ }
+ copy(target[hex.start:hex.start+hex.length], hex.values[0:hex.length])
+ return target
+}
+
+func (l *LogDevReader) GetEC() []byte {
+ if l.EC != nil {
+ return l.EC
+ }
+ l.EC = make([]byte, 0x100, 0x100)
+
+ file, err := os.Open(l.InputDirectory + "/ectool.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+
+ for scanner.Scan() {
+ line := scanner.Text()
+ if len(line) > 7 && isXDigit(line[0]) && isXDigit(line[1]) && line[2] == ':' {
+ l.EC = l.AssignHexLine(line, l.EC)
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+
+ return l.EC
+}
+
+func (l *LogDevReader) GetACPI() (Tables map[string][]byte) {
+ if l.ACPITables != nil {
+ return l.ACPITables
+ }
+ l.ACPITables = Tables
+
+ file, err := os.Open(l.InputDirectory + "/acpidump.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+
+ Tables = map[string][]byte{}
+
+ curTable := ""
+ for scanner.Scan() {
+ line := scanner.Text()
+ switch {
+ case len(line) >= 6 && line[5] == '@':
+ curTable = line[0:4]
+ Tables[curTable] = make([]byte, 0, 100000)
+ case len(line) > 7 && line[0:2] == " " && isXDigit(line[2]) && isXDigit(line[3]) && isXDigit(line[4]) && isXDigit(line[5]) && line[6] == ':':
+ Tables[curTable] = l.AssignHexLine(line, Tables[curTable])
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+
+ return
+}
+
+func (l *LogDevReader) GetPCIList() (PCIList []PCIDevData) {
+ file, err := os.Open(l.InputDirectory + "/lspci.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+
+ PCIList = []PCIDevData{}
+
+ for scanner.Scan() {
+ line := scanner.Text()
+ switch {
+ case !(len(line) < 7 || !isXDigit(line[0]) || !isXDigit(line[1]) || line[2] != ':' || !isXDigit(line[3]) || !isXDigit(line[4]) || line[5] != '.' || !isXDigit(line[6])):
+ cur := PCIDevData{}
+ fmt.Sscanf(line, "%x:%x.%x", &cur.Bus, &cur.Dev, &cur.Func)
+ lc := strings.LastIndex(line, ":")
+ li := strings.LastIndex(line[0:lc], "[")
+ if li < 0 {
+ continue
+ }
+ ven := 0
+ dev := 0
+ fmt.Sscanf(line[li+1:], "%x:%x", &ven, &dev)
+ cur.PCIDevID = uint16(dev)
+ cur.PCIVenID = uint16(ven)
+ cur.ConfigDump = make([]byte, 0x100, 0x1000)
+ PCIList = append(PCIList, cur)
+ case len(line) > 7 && isXDigit(line[0]) && line[1] == '0' && line[2] == ':':
+ start := 0
+ fmt.Sscanf(line, "%x:", &start)
+ cur := &PCIList[len(PCIList)-1]
+ cur.ConfigDump = l.AssignHexLine(line, cur.ConfigDump)
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+
+ return
+}
+
+func (l *LogDevReader) GetInteltool() (ret InteltoolData) {
+ file, err := os.Open(l.InputDirectory + "/inteltool.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+ paragraph := ""
+ ret.GPIO = map[uint16]uint32{}
+ ret.RCBA = map[uint16]uint32{}
+ ret.IGD = map[uint32]uint32{}
+ for scanner.Scan() {
+ line := scanner.Text()
+ switch {
+ case len(line) > 7 && line[0] == '0' && line[1] == 'x' && line[6] == ':' && paragraph == "RCBA":
+ addr, value := 0, 0
+ fmt.Sscanf(line, "0x%x: 0x%x", &addr, &value)
+ ret.RCBA[uint16(addr)] = uint32(value)
+ case len(line) > 9 && line[0] == '0' && line[1] == 'x' && line[8] == ':' && paragraph == "IGD":
+ addr, value := 0, 0
+ fmt.Sscanf(line, "0x%x: 0x%x", &addr, &value)
+ ret.IGD[uint32(addr)] = uint32(value)
+ case strings.Contains(line, "DEFAULT"):
+ continue
+ case strings.Contains(line, "DIFF"):
+ continue
+ case strings.HasPrefix(line, "gpiobase"):
+ addr, value := 0, 0
+ fmt.Sscanf(line, "gpiobase+0x%x: 0x%x", &addr, &value)
+ ret.GPIO[uint16(addr)] = uint32(value)
+ case strings.HasPrefix(line, "============="):
+ paragraph = strings.Trim(line, "= ")
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+ return
+}
+
+func (l *LogDevReader) GetDMI() (ret DMIData) {
+ file, err := os.Open(l.InputDirectory + "/dmidecode.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+ paragraph := ""
+ for scanner.Scan() {
+ line := scanner.Text()
+ if !strings.HasPrefix(line, "\t") {
+ paragraph = strings.TrimSpace(line)
+ continue
+ }
+ idx := strings.Index(line, ":")
+ if idx < 0 {
+ continue
+ }
+ name := strings.TrimSpace(line[0:idx])
+ value := strings.TrimSpace(line[idx+1:])
+ switch paragraph + ":" + name {
+ case "System Information:Manufacturer":
+ ret.Vendor = value
+ case "System Information:Product Name":
+ ret.Model = value
+ case "System Information:Version":
+ ret.Version = value
+ case "Chassis Information:Type":
+ ret.IsLaptop = (value == "Notebook" || value == "Laptop")
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+ return
+}
+
+func (l *LogDevReader) GetAzaliaCodecs() (ret []AzaliaCodec) {
+ for codecno := 0; codecno < 10; codecno++ {
+ cur := AzaliaCodec{CodecNo: codecno, PinConfig: map[int]uint32{}}
+ codec, err := os.Open(l.InputDirectory + "/codec#" + strconv.Itoa(codecno))
+ if err != nil {
+ continue
+ }
+ defer codec.Close()
+ pin, err := os.Open(l.InputDirectory + "/pin_hwC0D" + strconv.Itoa(codecno))
+ if err != nil {
+ continue
+ }
+ defer pin.Close()
+
+ scanner := bufio.NewScanner(codec)
+ for scanner.Scan() {
+ line := scanner.Text()
+ if strings.HasPrefix(line, "Codec:") {
+ fmt.Sscanf(line, "Codec: %s", &cur.Name)
+ continue
+ }
+ if strings.HasPrefix(line, "Vendor Id:") {
+ fmt.Sscanf(line, "Vendor Id: 0x%x", &cur.VendorID)
+ continue
+ }
+ if strings.HasPrefix(line, "Subsystem Id:") {
+ fmt.Sscanf(line, "Subsystem Id: 0x%x", &cur.SubsystemID)
+ continue
+ }
+ }
+
+ scanner = bufio.NewScanner(pin)
+ for scanner.Scan() {
+ line := scanner.Text()
+ addr := 0
+ val := uint32(0)
+ fmt.Sscanf(line, "0x%x 0x%x", &addr, &val)
+ cur.PinConfig[addr] = val
+ }
+ ret = append(ret, cur)
+ }
+ return
+}
+
+func (l *LogDevReader) GetIOPorts() []IOPorts {
+ file, err := os.Open(l.InputDirectory + "/ioports.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+ scanner := bufio.NewScanner(file)
+ ret := make([]IOPorts, 0, 100)
+ for scanner.Scan() {
+ line := scanner.Text()
+ el := IOPorts{}
+ fmt.Sscanf(line, " %x-%x : %s", &el.Start, &el.End, &el.Usage)
+ ret = append(ret, el)
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+ return ret
+
+}
+
+func (l *LogDevReader) GetCPUModel() (ret []uint32) {
+ file, err := os.Open(l.InputDirectory + "/cpuinfo.log")
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer file.Close()
+
+ scanner := bufio.NewScanner(file)
+ ret = make([]uint32, 0, 100)
+ proc := 0
+ for scanner.Scan() {
+ line := scanner.Text()
+ sep := strings.Index(line, ":")
+ if sep < 0 {
+ continue
+ }
+ key := strings.TrimSpace(line[0:sep])
+ val := strings.TrimSpace(line[sep+1:])
+
+ if key == "processor" {
+ proc, _ := strconv.Atoi(val)
+ if len(ret) <= proc {
+ ret = ret[0 : proc+1]
+ }
+ continue
+ }
+ if key == "cpu family" {
+ family, _ := strconv.Atoi(val)
+ ret[proc] |= uint32(((family & 0xf) << 8) | ((family & 0xff0) << 16))
+ }
+ if key == "model" {
+ model, _ := strconv.Atoi(val)
+ ret[proc] |= uint32(((model & 0xf) << 4) | ((model & 0xf0) << 12))
+ }
+ if key == "stepping" {
+ stepping, _ := strconv.Atoi(val)
+ ret[proc] |= uint32(stepping & 0xf)
+ }
+ }
+
+ if err := scanner.Err(); err != nil {
+ log.Fatal(err)
+ }
+ return
+}
+
+var FlagLogInput = flag.String("input_log", ".", "Input log directory")
+var FlagLogMkLogs = flag.Bool("make_logs", false, "Dump logs")
+
+func MakeLogReader() *LogDevReader {
+ if *FlagLogMkLogs {
+ MakeLogs(*FlagLogInput)
+ }
+ return &LogDevReader{InputDirectory: *FlagLogInput}
+}
diff --git a/util/autoport/main.go b/util/autoport/main.go
new file mode 100644
index 0000000..e9d847d
--- /dev/null
+++ b/util/autoport/main.go
@@ -0,0 +1,858 @@
+/* This is just an experiment. Full automatic porting
+ is probably not possible but a lot can be automated. */
+package main
+
+import (
+ "bytes"
+ "flag"
+ "fmt"
+ "log"
+ "os"
+ "sort"
+ "strings"
+)
+
+type PCIAddr struct {
+ Bus int
+ Dev int
+ Func int
+}
+
+type PCIDevData struct {
+ PCIAddr
+ PCIVenID uint16
+ PCIDevID uint16
+ ConfigDump []uint8
+}
+
+type PCIDevice interface {
+ Scan(ctx Context, addr PCIDevData)
+}
+
+type InteltoolData struct {
+ GPIO map[uint16]uint32
+ RCBA map[uint16]uint32
+ IGD map[uint32]uint32
+}
+
+type DMIData struct {
+ Vendor string
+ Model string
+ Version string
+ IsLaptop bool
+}
+
+type AzaliaCodec struct {
+ Name string
+ VendorID uint32
+ SubsystemID uint32
+ CodecNo int
+ PinConfig map[int]uint32
+}
+
+type DevReader interface {
+ GetPCIList() []PCIDevData
+ GetDMI() DMIData
+ GetInteltool() InteltoolData
+ GetAzaliaCodecs() []AzaliaCodec
+ GetACPI() map[string][]byte
+ GetCPUModel() []uint32
+ GetEC() []byte
+ GetIOPorts() []IOPorts
+}
+
+type IOPorts struct {
+ Start uint16
+ End uint16
+ Usage string
+}
+
+type SouthBridger interface {
+ GetGPIOHeader() string
+ EncodeGPE(int) int
+ DecodeGPE(int) int
+ EnableGPE(int)
+ NeedRouteGPIOManually()
+}
+
+var SouthBridge SouthBridger
+var ROMStageFiles map[string]string = map[string]string{}
+var RAMStageFiles map[string]string = map[string]string{}
+var SMMFiles map[string]string = map[string]string{}
+var MainboardInit string
+var MainboardEnable string
+var MainboardIncludes []string
+
+type Context struct {
+ MoboID string
+ KconfigName string
+ Vendor string
+ Model string
+ BaseDirectory string
+ InfoSource DevReader
+}
+
+type IOAPICIRQ struct {
+ APICID int
+ IRQNO [4]int
+}
+
+var IOAPICIRQs map[PCIAddr]IOAPICIRQ = map[PCIAddr]IOAPICIRQ{}
+var KconfigBool map[string]bool = map[string]bool{}
+var KconfigComment map[string]string = map[string]string{}
+var KconfigString map[string]string = map[string]string{}
+var KconfigStringUnquoted map[string]string = map[string]string{}
+var KconfigHex map[string]uint32 = map[string]uint32{}
+var KconfigInt map[string]int = map[string]int{}
+var ROMSizeKB = 0
+var ROMProtocol = ""
+var FlashROMSupport = ""
+
+func GetLE16(inp []byte) uint16 {
+ return uint16(inp[0]) | (uint16(inp[1]) << 8)
+}
+
+func FormatHexLE16(inp []byte) string {
+ return fmt.Sprintf("0x%04x", GetLE16(inp))
+}
+
+func FormatHex32(u uint32) string {
+ return fmt.Sprintf("0x%08x", u)
+}
+
+func FormatHex8(u uint8) string {
+ return fmt.Sprintf("0x%02x", u)
+}
+
+func FormatInt32(u uint32) string {
+ return fmt.Sprintf("%d", u)
+}
+
+func FormatHexLE32(d []uint8) string {
+ u := uint32(d[0]) | (uint32(d[1]) << 8) | (uint32(d[2]) << 16) | (uint32(d[3]) << 24)
+ return FormatHex32(u)
+}
+
+func FormatBool(inp bool) string {
+ if inp {
+ return "1"
+ } else {
+ return "0"
+ }
+}
+
+func sanitize(inp string) string {
+ result := strings.ToLower(inp)
+ result = strings.Replace(result, " ", "_", -1)
+ result = strings.Replace(result, ",", "_", -1)
+ for strings.HasSuffix(result, ".") {
+ result = result[0 : len(result)-1]
+ }
+ return result
+}
+
+func AddROMStageFile(Name string, Condition string) {
+ ROMStageFiles[Name] = Condition
+}
+
+func AddRAMStageFile(Name string, Condition string) {
+ RAMStageFiles[Name] = Condition
+}
+
+func AddSMMFile(Name string, Condition string) {
+ SMMFiles[Name] = Condition
+}
+
+func IsIOPortUsedBy(ctx Context, port uint16, name string) bool {
+ for _, io := range ctx.InfoSource.GetIOPorts() {
+ if io.Start <= port && port <= io.End && io.Usage == name {
+ return true
+ }
+ }
+ return false
+}
+
+var FlagOutDir = flag.String("coreboot_dir", ".", "Resulting coreboot directory")
+
+func writeMF(mf *os.File, files map[string]string, category string) {
+ keys := []string{}
+ for file, _ := range files {
+ keys = append(keys, file)
+ }
+
+ sort.Strings(keys)
+
+ for _, file := range keys {
+ condition := files[file]
+ if condition == "" {
+ fmt.Fprintf(mf, "%s-y += %s\n", category, file)
+ } else {
+ fmt.Fprintf(mf, "%s-$(%s) += %s\n", category,
+ condition, file)
+ }
+ }
+}
+
+func Create(ctx Context, name string) *os.File {
+ li := strings.LastIndex(name, "/")
+ if li > 0 {
+ os.MkdirAll(ctx.BaseDirectory+"/"+name[0:li], 0700)
+ }
+ mf, err := os.Create(ctx.BaseDirectory + "/" + name)
+ if err != nil {
+ log.Fatal(err)
+ }
+ return mf
+}
+
+func RestorePCI16Simple(f *os.File, pcidev PCIDevData, addr uint16) {
+ fmt.Fprintf(f, " pci_write_config16(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x);\n",
+ pcidev.Bus, pcidev.Dev, pcidev.Func, addr,
+ pcidev.ConfigDump[addr+1],
+ pcidev.ConfigDump[addr])
+}
+
+func RestorePCI32Simple(f *os.File, pcidev PCIDevData, addr uint16) {
+ fmt.Fprintf(f, " pci_write_config32(PCI_DEV(%d, 0x%02x, %d), 0x%02x, 0x%02x%02x%02x%02x);\n",
+ pcidev.Bus, pcidev.Dev, pcidev.Func, addr,
+ pcidev.ConfigDump[addr+3],
+ pcidev.ConfigDump[addr+2],
+ pcidev.ConfigDump[addr+1],
+ pcidev.ConfigDump[addr])
+}
+
+func RestoreRCBA32(f *os.File, inteltool InteltoolData, addr uint16) {
+ fmt.Fprintf(f, "\tRCBA32(0x%04x) = 0x%08x;\n", addr, inteltool.RCBA[addr])
+}
+
+type PCISlot struct {
+ PCIAddr
+ additionalComment string
+ writeEmpty bool
+}
+
+type DevTreeNode struct {
+ Bus int
+ Dev int
+ Func int
+ Disabled bool
+ Registers map[string]string
+ IOs map[uint16]uint16
+ Children []DevTreeNode
+ PCISlots []PCISlot
+ PCIController bool
+ ChildPCIBus int
+ MissingParent string
+ SubVendor uint16
+ SubSystem uint16
+ Chip string
+ Comment string
+}
+
+var DevTree DevTreeNode
+var MissingChildren map[string][]DevTreeNode = map[string][]DevTreeNode{}
+var unmatchedPCIChips map[PCIAddr]DevTreeNode = map[PCIAddr]DevTreeNode{}
+var unmatchedPCIDevices map[PCIAddr]DevTreeNode = map[PCIAddr]DevTreeNode{}
+
+func Offset(dt *os.File, offset int) {
+ for i := 0; i < offset; i++ {
+ fmt.Fprintf(dt, "\t")
+ }
+}
+
+func MatchDev(dev *DevTreeNode) {
+ for idx := range dev.Children {
+ MatchDev(&dev.Children[idx])
+ }
+
+ for _, slot := range dev.PCISlots {
+ slotChip, ok := unmatchedPCIChips[slot.PCIAddr]
+
+ if !ok {
+ continue
+ }
+
+ if slot.additionalComment != "" && slotChip.Comment != "" {
+ slotChip.Comment = slot.additionalComment + " " + slotChip.Comment
+ } else {
+ slotChip.Comment = slot.additionalComment + slotChip.Comment
+ }
+
+ delete(unmatchedPCIChips, slot.PCIAddr)
+ MatchDev(&slotChip)
+ dev.Children = append(dev.Children, slotChip)
+ }
+
+ if dev.PCIController {
+ for slot, slotDev := range unmatchedPCIChips {
+ if slot.Bus == dev.ChildPCIBus {
+ delete(unmatchedPCIChips, slot)
+ MatchDev(&slotDev)
+ dev.Children = append(dev.Children, slotDev)
+ }
+ }
+ }
+
+ for _, slot := range dev.PCISlots {
+ slotDev, ok := unmatchedPCIDevices[slot.PCIAddr]
+ if !ok {
+ if slot.writeEmpty {
+ dev.Children = append(dev.Children,
+ DevTreeNode{
+ Registers: map[string]string{},
+ Chip: "pci",
+ Bus: slot.Bus,
+ Dev: slot.Dev,
+ Func: slot.Func,
+ Comment: slot.additionalComment,
+ Disabled: true,
+ },
+ )
+ }
+ continue
+ }
+
+ if slot.additionalComment != "" && slotDev.Comment != "" {
+ slotDev.Comment = slot.additionalComment + " " + slotDev.Comment
+ } else {
+ slotDev.Comment = slot.additionalComment + slotDev.Comment
+ }
+
+ MatchDev(&slotDev)
+ dev.Children = append(dev.Children, slotDev)
+ delete(unmatchedPCIDevices, slot.PCIAddr)
+ }
+
+ if dev.MissingParent != "" {
+ for _, child := range MissingChildren[dev.MissingParent] {
+ MatchDev(&child)
+ dev.Children = append(dev.Children, child)
+ }
+ delete(MissingChildren, dev.MissingParent)
+ }
+
+ if dev.PCIController {
+ for slot, slotDev := range unmatchedPCIDevices {
+ if slot.Bus == dev.ChildPCIBus {
+ MatchDev(&slotDev)
+ dev.Children = append(dev.Children, slotDev)
+ delete(unmatchedPCIDevices, slot)
+ }
+ }
+ }
+}
+
+func writeOn(dt *os.File, dev DevTreeNode) {
+ if dev.Disabled {
+ fmt.Fprintf(dt, "off")
+ } else {
+ fmt.Fprintf(dt, "on")
+ }
+}
+
+func WriteDev(dt *os.File, offset int, dev DevTreeNode) {
+ Offset(dt, offset)
+ switch dev.Chip {
+ case "cpu_cluster", "lapic", "domain", "ioapic":
+ fmt.Fprintf(dt, "device %s 0x%x ", dev.Chip, dev.Dev)
+ writeOn(dt, dev)
+ case "pci", "pnp":
+ fmt.Fprintf(dt, "device %s %02x.%x ", dev.Chip, dev.Dev, dev.Func)
+ writeOn(dt, dev)
+ case "i2c":
+ fmt.Fprintf(dt, "device %s %02x ", dev.Chip, dev.Dev)
+ writeOn(dt, dev)
+ default:
+ fmt.Fprintf(dt, "chip %s", dev.Chip)
+ }
+ if dev.Comment != "" {
+ fmt.Fprintf(dt, " # %s", dev.Comment)
+ }
+ fmt.Fprintf(dt, "\n")
+ if dev.Chip == "pci" && dev.SubSystem != 0 && dev.SubVendor != 0 {
+ Offset(dt, offset+1)
+ fmt.Fprintf(dt, "subsystemid 0x%04x 0x%04x\n", dev.SubVendor, dev.SubSystem)
+ }
+
+ ioapic, ok := IOAPICIRQs[PCIAddr{Bus: dev.Bus, Dev: dev.Dev, Func: dev.Func}]
+ if dev.Chip == "pci" && ok {
+ for pin, irq := range ioapic.IRQNO {
+ if irq != 0 {
+ Offset(dt, offset+1)
+ fmt.Fprintf(dt, "ioapic_irq %d INT%c 0x%x\n", ioapic.APICID, 'A'+pin, irq)
+ }
+ }
+ }
+
+ keys := []string{}
+ for reg, _ := range dev.Registers {
+ keys = append(keys, reg)
+ }
+
+ sort.Strings(keys)
+
+ for _, reg := range keys {
+ val := dev.Registers[reg]
+ Offset(dt, offset+1)
+ fmt.Fprintf(dt, "register \"%s\" = \"%s\"\n", reg, val)
+ }
+
+ ios := []int{}
+ for reg, _ := range dev.IOs {
+ ios = append(ios, int(reg))
+ }
+
+ sort.Ints(ios)
+
+ for _, reg := range ios {
+ val := dev.IOs[uint16(reg)]
+ Offset(dt, offset+1)
+ fmt.Fprintf(dt, "io 0x%x = 0x%x\n", reg, val)
+ }
+
+ for _, child := range dev.Children {
+ WriteDev(dt, offset+1, child)
+ }
+
+ Offset(dt, offset)
+ fmt.Fprintf(dt, "end\n")
+}
+
+func PutChip(domain string, cur DevTreeNode) {
+ MissingChildren[domain] = append(MissingChildren[domain], cur)
+}
+
+func PutPCIChip(addr PCIDevData, cur DevTreeNode) {
+ unmatchedPCIChips[addr.PCIAddr] = cur
+}
+
+func PutPCIDevParent(addr PCIDevData, comment string, parent string) {
+ cur := DevTreeNode{
+ Registers: map[string]string{},
+ Chip: "pci",
+ Bus: addr.Bus,
+ Dev: addr.Dev,
+ Func: addr.Func,
+ MissingParent: parent,
+ Comment: comment,
+ }
+ if addr.ConfigDump[0xa] == 0x04 && addr.ConfigDump[0xb] == 0x06 {
+ cur.PCIController = true
+ cur.ChildPCIBus = int(addr.ConfigDump[0x19])
+
+ loopCtr := 0
+ for capPtr := addr.ConfigDump[0x34]; capPtr != 0; capPtr = addr.ConfigDump[capPtr+1] {
+ /* Avoid hangs. There are only 0x100 different possible values for capPtr.
+ If we iterate longer than that, we're in endless loop. */
+ loopCtr++
+ if loopCtr > 0x100 {
+ break
+ }
+ if addr.ConfigDump[capPtr] == 0x0d {
+ cur.SubVendor = GetLE16(addr.ConfigDump[capPtr+4 : capPtr+6])
+ cur.SubSystem = GetLE16(addr.ConfigDump[capPtr+6 : capPtr+8])
+ }
+ }
+ } else {
+ cur.SubVendor = GetLE16(addr.ConfigDump[0x2c:0x2e])
+ cur.SubSystem = GetLE16(addr.ConfigDump[0x2e:0x30])
+ }
+ unmatchedPCIDevices[addr.PCIAddr] = cur
+}
+
+func PutPCIDev(addr PCIDevData, comment string) {
+ PutPCIDevParent(addr, comment, "")
+}
+
+type GenericPCI struct {
+ Comment string
+ Bus0Subdiv string
+ MissingParent string
+}
+
+type GenericVGA struct {
+ GenericPCI
+}
+
+type DSDTInclude struct {
+ Comment string
+ File string
+}
+
+type DSDTDefine struct {
+ Key string
+ Comment string
+ Value string
+}
+
+var DSDTIncludes []DSDTInclude
+var DSDTPCI0Includes []DSDTInclude
+var DSDTDefines []DSDTDefine
+
+func (g GenericPCI) Scan(ctx Context, addr PCIDevData) {
+ PutPCIDevParent(addr, g.Comment, g.MissingParent)
+}
+
+func (g GenericVGA) Scan(ctx Context, addr PCIDevData) {
+ KconfigString["VGA_BIOS_ID"] = fmt.Sprintf("%04x,%04x",
+ addr.PCIVenID,
+ addr.PCIDevID)
+ KconfigString["VGA_BIOS_FILE"] = fmt.Sprintf("pci%04x,%04x.rom",
+ addr.PCIVenID,
+ addr.PCIDevID)
+ PutPCIDevParent(addr, g.Comment, g.MissingParent)
+}
+
+func makeKconfigName(ctx Context) {
+ kn := Create(ctx, "Kconfig.name")
+ defer kn.Close()
+
+ fmt.Fprintf(kn, "config %s\n\tbool \"%s\"\n", ctx.KconfigName, ctx.Model)
+}
+
+func makeComment(name string) string {
+ cmt, ok := KconfigComment[name]
+ if !ok {
+ return ""
+ }
+ return " # " + cmt
+}
+
+func makeKconfig(ctx Context) {
+ kc := Create(ctx, "Kconfig")
+ defer kc.Close()
+
+ fmt.Fprintf(kc, "if %s\n\n", ctx.KconfigName)
+
+ fmt.Fprintf(kc, "config BOARD_SPECIFIC_OPTIONS # dummy\n\tdef_bool y\n")
+ keys := []string{}
+ for name, val := range KconfigBool {
+ if val {
+ keys = append(keys, name)
+ }
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, "\tselect %s%s\n", name, makeComment(name))
+ }
+
+ keys = nil
+ for name, val := range KconfigBool {
+ if !val {
+ keys = append(keys, name)
+ }
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, `
+config %s%s
+ bool
+ default n
+`, name, makeComment(name))
+ }
+
+ keys = nil
+ for name, _ := range KconfigStringUnquoted {
+ keys = append(keys, name)
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, `
+config %s%s
+ string
+ default %s
+`, name, makeComment(name), KconfigStringUnquoted[name])
+ }
+
+ keys = nil
+ for name, _ := range KconfigString {
+ keys = append(keys, name)
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, `
+config %s%s
+ string
+ default "%s"
+`, name, makeComment(name), KconfigString[name])
+ }
+
+ keys = nil
+ for name, _ := range KconfigHex {
+ keys = append(keys, name)
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, `
+config %s%s
+ hex
+ default 0x%x
+`, name, makeComment(name), KconfigHex[name])
+ }
+
+ keys = nil
+ for name, _ := range KconfigInt {
+ keys = append(keys, name)
+ }
+
+ sort.Strings(keys)
+
+ for _, name := range keys {
+ fmt.Fprintf(kc, `
+config %s%s
+ int
+ default %d
+`, name, makeComment(name), KconfigInt[name])
+ }
+
+ fmt.Fprintf(kc, "endif\n")
+}
+
+const MoboDir = "/src/mainboard/"
+
+func makeVendor(ctx Context) {
+ vendor := ctx.Vendor
+ vendorSane := sanitize(ctx.Vendor)
+ vendorDir := *FlagOutDir + MoboDir + vendorSane
+ vendorUpper := strings.ToUpper(vendorSane)
+ kconfig := vendorDir + "/Kconfig"
+ if _, err := os.Stat(kconfig); os.IsNotExist(err) {
+ f, err := os.Create(kconfig)
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer f.Close()
+ f.WriteString(`if VENDOR_` + vendorUpper + `
+
+choice
+ prompt "Mainboard model"
+
+source "src/mainboard/` + vendorSane + `/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/` + vendorSane + `/*/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "` + vendor + `"
+
+endif # VENDOR_` + vendorUpper + "\n")
+ }
+ kconfigName := vendorDir + "/Kconfig.name"
+ if _, err := os.Stat(kconfigName); os.IsNotExist(err) {
+ f, err := os.Create(kconfigName)
+ if err != nil {
+ log.Fatal(err)
+ }
+ defer f.Close()
+ f.WriteString(`config VENDOR_` + vendorUpper + `
+ bool "` + vendor + `"
+`)
+ }
+
+}
+
+func GuessECGPE(ctx Context) int {
+ /* FIXME:XX Use iasl -d and/or better parsing */
+ dsdt := ctx.InfoSource.GetACPI()["DSDT"]
+ idx := bytes.Index(dsdt, []byte{0x08, '_', 'G', 'P', 'E', 0x0a}) /* Name (_GPE, byte). */
+ if idx > 0 {
+ return int(dsdt[idx+6])
+ }
+ return -1
+}
+
+func GuessSPDMap(ctx Context) []uint8 {
+ dmi := ctx.InfoSource.GetDMI()
+
+ if dmi.Vendor == "LENOVO" {
+ return []uint8{0x50, 0x51, 0x52, 0x53}
+ }
+ return []uint8{0x50, 0x52, 0x51, 0x53}
+}
+
+func main() {
+ flag.Parse()
+
+ ctx := Context{}
+
+ ctx.InfoSource = MakeLogReader()
+
+ dmi := ctx.InfoSource.GetDMI()
+
+ ctx.Vendor = dmi.Vendor
+
+ if dmi.Vendor == "LENOVO" {
+ ctx.Model = dmi.Version
+ } else {
+ ctx.Model = dmi.Model
+ }
+
+ if dmi.IsLaptop {
+ KconfigBool["SYSTEM_TYPE_LAPTOP"] = true
+ }
+ ctx.MoboID = sanitize(ctx.Vendor) + "/" + sanitize(ctx.Model)
+ ctx.KconfigName = "BOARD_" + strings.ToUpper(sanitize(ctx.Vendor)+"_"+sanitize(ctx.Model))
+ ctx.BaseDirectory = *FlagOutDir + MoboDir + ctx.MoboID
+ KconfigStringUnquoted["MAINBOARD_DIR"] = ctx.MoboID
+ KconfigString["MAINBOARD_PART_NUMBER"] = ctx.Model
+
+ os.MkdirAll(ctx.BaseDirectory, 0700)
+
+ makeVendor(ctx)
+
+ ScanRoot(ctx)
+
+ if len(ROMStageFiles) > 0 || len(RAMStageFiles) > 0 || len(SMMFiles) > 0 {
+ mf := Create(ctx, "Makefile.inc")
+ defer mf.Close()
+ writeMF(mf, ROMStageFiles, "romstage")
+ writeMF(mf, RAMStageFiles, "ramstage")
+ writeMF(mf, SMMFiles, "smm")
+ }
+
+ devtree := Create(ctx, "devicetree.cb")
+ defer devtree.Close()
+
+ MatchDev(&DevTree)
+ WriteDev(devtree, 0, DevTree)
+
+ if MainboardInit != "" || MainboardEnable != "" || MainboardIncludes != nil {
+ mainboard := Create(ctx, "mainboard.c")
+ defer mainboard.Close()
+ mainboard.WriteString("#include <device/device.h>\n")
+ for _, include := range MainboardIncludes {
+ mainboard.WriteString("#include <" + include + ">\n")
+ }
+ mainboard.WriteString("\n")
+ if MainboardInit != "" {
+ mainboard.WriteString(`static void mainboard_init(device_t dev)
+{
+` + MainboardInit + "}\n\n")
+ }
+ if MainboardInit != "" || MainboardEnable != "" {
+ mainboard.WriteString("static void mainboard_enable(device_t dev)\n{\n")
+ if MainboardInit != "" {
+ mainboard.WriteString("\tdev->ops->init = mainboard_init;\n\n")
+ }
+ mainboard.WriteString(MainboardEnable)
+ mainboard.WriteString("}\n\n")
+ mainboard.WriteString(`struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
+`)
+ }
+ }
+
+ at := Create(ctx, "acpi_tables.c")
+ defer at.Close()
+ at.WriteString("/* dummy */\n")
+
+ bi := Create(ctx, "board_info.txt")
+ defer bi.Close()
+
+ fixme := ""
+
+ if dmi.IsLaptop {
+ bi.WriteString("Category: laptop\n")
+ } else {
+ bi.WriteString("Category: desktop\n")
+ fixme += "check category, "
+ }
+
+ missing := "ROM package, ROM socketed"
+
+ if ROMProtocol != "" {
+ fmt.Fprintf(bi, "ROM protocol: %s\n", ROMProtocol)
+ } else {
+ missing += ", ROM protocol"
+ }
+
+ if FlashROMSupport != "" {
+ fmt.Fprintf(bi, "Flashrom support: %s\n", FlashROMSupport)
+ } else {
+ missing += ", Flashrom support"
+ }
+
+ missing += ", Release year"
+
+ if fixme != "" {
+ fmt.Fprintf(bi, "FIXME: %s, put %s\n", fixme, missing)
+ } else {
+ fmt.Fprintf(bi, "FIXME: put %s\n", missing)
+ }
+
+ rs := Create(ctx, "romstage.c")
+ defer rs.Close()
+ rs.WriteString("/* dummy file */\n")
+
+ if ROMSizeKB == 0 {
+ KconfigBool["BOARD_ROMSIZE_KB_2048"] = true
+ KconfigComment["BOARD_ROMSIZE_KB_2048"] = "FIXME: correct this"
+ } else {
+ KconfigBool[fmt.Sprintf("BOARD_ROMSIZE_KB_%d", ROMSizeKB)] = true
+ }
+
+ makeKconfig(ctx)
+ makeKconfigName(ctx)
+
+ dsdt := Create(ctx, "dsdt.asl")
+ defer dsdt.Close()
+
+ for _, define := range DSDTDefines {
+ if define.Comment != "" {
+ fmt.Fprintf(dsdt, "\t/* %s. */\n", define.Comment)
+ }
+ dsdt.WriteString("#define " + define.Key + " " + define.Value + "\n")
+ }
+
+ dsdt.WriteString(
+ `DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x03, // DSDT revision: ACPI v3.0
+ "COREv4", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20141018 // OEM revision
+)
+{
+ // Some generic macros
+ #include "acpi/platform.asl"
+`)
+
+ for _, x := range DSDTIncludes {
+ if x.Comment != "" {
+ fmt.Fprintf(dsdt, "\t/* %s. */\n", x.Comment)
+ }
+ fmt.Fprintf(dsdt, "\t#include <%s>\n", x.File)
+ }
+
+ dsdt.WriteString(`
+ Scope (\_SB) {
+ Device (PCI0)
+ {
+`)
+ for _, x := range DSDTPCI0Includes {
+ if x.Comment != "" {
+ fmt.Fprintf(dsdt, "\t/* %s. */\n", x.Comment)
+ }
+ fmt.Fprintf(dsdt, "\t\t#include <%s>\n", x.File)
+ }
+ dsdt.WriteString(
+ ` }
+ }
+}
+`)
+
+}
diff --git a/util/autoport/rce823.go b/util/autoport/rce823.go
new file mode 100644
index 0000000..7c92109
--- /dev/null
+++ b/util/autoport/rce823.go
@@ -0,0 +1,39 @@
+package main
+
+import "fmt"
+
+type rce823 struct {
+ variant string
+}
+
+func (r rce823) Scan(ctx Context, addr PCIDevData) {
+ if addr.Dev == 0 && addr.Func == 0 {
+ cur := DevTreeNode{
+ Chip: "drivers/ricoh/rce822",
+ Comment: "Ricoh cardreader",
+ Registers: map[string]string{
+
+ "sdwppol": fmt.Sprintf("%d", (addr.ConfigDump[0xfb]&2)>>1),
+ "disable_mask": fmt.Sprintf("0x%x", addr.ConfigDump[0xcb]),
+ },
+ PCISlots: []PCISlot{
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 0}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 1}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 2}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 3}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 4}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 5}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 6}, writeEmpty: false},
+ PCISlot{PCIAddr: PCIAddr{Bus: addr.Bus, Dev: 0x0, Func: 7}, writeEmpty: false},
+ },
+ }
+ PutPCIChip(addr, cur)
+ }
+ PutPCIDev(addr, "Ricoh SD card reader")
+ KconfigBool["DRIVERS_RICOH_RCE822"] = true
+}
+
+func init() {
+ RegisterPCI(0x1180, 0xe822, rce823{})
+ RegisterPCI(0x1180, 0xe823, rce823{})
+}
diff --git a/util/autoport/readme.md b/util/autoport/readme.md
new file mode 100644
index 0000000..4f535fd
--- /dev/null
+++ b/util/autoport/readme.md
@@ -0,0 +1,383 @@
+# Porting coreboot using autoport
+
+## Supported platforms
+
+### Chipset.
+For any sandybridge or ivybridge platform generated result should
+be bootable, possibly with minor fixes.
+
+### EC
+EC support is likely to work on intel-based thinkpads. Other laptops are likely to miss EC support
+
+## How to use
+
+* Go into BIOS setup on target machine and enable all the device.
+This will allow autoport to detect as much as possible
+* Boot into target machine under GNU/Linux
+* Make sure you have GCC and golang installed
+* Grab coreboot tree
+* Execute following commands starting from coreboot tree
+
+ cd util/ectool
+ make
+ cd ../inteltool
+ make
+ cd ../autoport
+ go build
+ ./autoport --input_log=logs --make_logs --coreboot_dir=../..
+
+* Look for output unknown PCI devices. E.g.
+
+ Unknown PCI device 8086:0085, assuming removable
+
+If autoport says `assuming removable` then you're fine. If it doesn't
+then you may want to add relevant PCIIDs to autoport. When rerunning
+you can skip argument `--make_logs` to reuse the same logs
+
+* At this point the new board is added to the tree but don't flash it
+yet as it will brick you machine. Instead keep this new port and logs
+from `util/autoport/logs` somewhere safe
+
+* Disassemble your laptop and locate flash chip <http://flashrom.org/Technology>
+is a great resource. Flash chip is usually in `SOIC-8` (2x4 pins) or `SOIC-16`
+(2x8 chips). You'll probably have several candidates. Look up what's written on
+them and look up what's this chip on the web.
+
+* Once you know what's the chip is, get external flasher and read it. Twice. Compare
+the results and retry if they differ. Save the result somewhere safe, in preference
+copy to read-only storage as backup.
+
+* Compile coreboot with console enabled (EHCI debug or serial if present are recommended)
+
+* For recent intel chipsets you need to avoid overwriting ME firmware. Recommended procedure is
+(replace 8 with your flash size in MiB):
+
+ cp backup.rom flash.rom
+ dd if=coreboot/build/coreboot.rom skip=$[8-1] seek=$[8-1] bs=1M of=flash.rom
+
+* Flash the result
+* Boot and grab the log and fix the issues. See next section for useful info.
+* grep your board for FIXME. autoport adds comments when it's unsure. Sometimes it's just
+a minor check and sometimes it needs more involvment. See next section.
+* Send new board to review.coreboot.org. I mean it, your effort is very appreciated.
+
+## Manual fixes
+### SPD
+If you're able to use full memory with any combination of inserted modules than this is
+most likely correct. In order to initialize the memory coreboot needs to know RAM timings.
+For socketed RAM it's stored in a small EEPROM chip which can be accessed through SPD. Unfortunately
+mapping between SPD addresses and RAM slots differs and cannot always be detected automatically.
+Resulting SPD map is encoded in function `mainboard_get_spd` in `early_southbridge.c`.
+autoport uses the most common map `0x50, 0x51, 0x52, 0x53` except for lenovos which are
+known to use `0x50, 0x52, 0x51, 0x53`. To detect the correct memory map the easiest way is with
+vendor BIOS to boot with just one module in channel 0 slot 0 and then see where does it show
+up in SPD. Under Linux you can see present SPD addresses with following commands:
+
+ phcoder@sid:~/coreboot/util/autoport$ sudo modprobe i2c-dev
+ phcoder@sid:~/coreboot/util/autoport$ sudo i2cdetect -l
+ i2c-0 i2c i915 gmbus ssc I2C adapter
+ i2c-1 i2c i915 gmbus vga I2C adapter
+ i2c-2 i2c i915 gmbus panel I2C adapter
+ i2c-3 i2c i915 gmbus dpc I2C adapter
+ i2c-4 i2c i915 gmbus dpb I2C adapter
+ i2c-5 i2c i915 gmbus dpd I2C adapter
+ i2c-6 i2c DPDDC-B I2C adapter
+ i2c-7 i2c DPDDC-C I2C adapter
+ i2c-8 i2c DPDDC-D I2C adapter
+ i2c-9 smbus SMBus I801 adapter at 0400 SMBus adapter
+ phcoder@sid:~/coreboot/util/autoport$ sudo i2cdetect 9
+ WARNING! This program can confuse your I2C bus, cause data loss and worse!
+ I will probe file /dev/i2c-9.
+ I will probe address range 0x03-0x77.
+ Continue? [Y/n] y
+ 0 1 2 3 4 5 6 7 8 9 a b c d e f
+ 00: -- -- -- -- -- 08 -- -- -- -- -- -- --
+ 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ 20: -- -- -- -- 24 -- -- -- -- -- -- -- -- -- -- --
+ 30: 30 31 -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ 50: 50 -- -- -- 54 55 56 57 -- -- -- -- 5c 5d 5e 5f
+ 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
+ 70: -- -- -- -- -- -- -- --
+
+Make sure to replace `9` with whatever bus is marked as smbus. Here in an example
+you see SPD at address `0x50`. Since we've booted with just the module in C0S0, so
+the first entry in SPD map has to be `0x50`. Once you have SPD map your
+`mainboard_get_spd` should look something like:
+
+ void mainboard_get_spd(spd_raw_data *spd) {
+ read_spd (&spd[0], 0x50);
+ read_spd (&spd[1], 0x51);
+ read_spd (&spd[2], 0x52);
+ read_spd (&spd[3], 0x53);
+ }
+
+You can and should omit lines which correspond to
+slots not present on your machine.
+
+This way works well if your RAM is socketed. For soldered RAM if you see
+its SPD, you're in a luck and can proceed the same way although you may have to
+guess some entries due to RAM not being removable.
+
+Most cases of soldered RAM don't have EEPROM chip. In this case you'd have to create
+fake SPD. Look in `inteltool.log`. You'll see something like:
+
+ /* SPD matching current mode: */
+ /* CH0S0 */
+ 00: 92 11 0b 03 04 00 00 09 03 52 01 08 0a 00 80 00
+ 10: 6e 78 6e 32 6e 11 18 81 20 08 3c 3c 00 f0 00 00
+ 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00
+ 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6d 17
+ 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ /* CH1S0 */
+ 00: 92 11 0b 03 04 00 00 09 03 52 01 08 0a 00 80 00
+ 10: 6e 78 6e 32 6e 11 18 81 20 08 3c 3c 00 f0 00 00
+ 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00
+ 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6d 17
+ 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+
+This is not completely exact represantation of RAM
+capablities as it lists only the mode currently used
+and lacks minor info like serial number. Using `xxd`
+you can create binary represantation of this SPD:
+
+ cat | xxd -r > spd.bin <<EOF
+ 00: 92 11 0b 03 04 00 00 09 03 52 01 08 0a 00 80 00
+ 10: 6e 78 6e 32 6e 11 18 81 20 08 3c 3c 00 f0 00 00
+ 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00
+ 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6d 17
+ 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ EOF
+
+Then you can place this file into mainboard directory
+and hook it up into build system by adding following
+lines to `Makefile.inc` (creating a new file if needed)
+
+ cbfs-files-y += spd.bin
+ spd.bin-file := spd.bin
+ spd.bin-type := raw
+
+And then make coreboot actually use this SPD. Following
+example shows a hybrid situation with one module
+soldered and another is socketed:
+
+ void mainboard_get_spd(spd_raw_data *spd)
+ {
+ void *spd_file;
+ size_t spd_file_len = 0;
+ /* C0S0 is a soldered RAM with no real SPD. Use stored SPD. */
+ spd_file = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, "spd.bin", CBFS_TYPE_RAW,
+ &spd_file_len);
+ if (spd_file && spd_file_len >= 128)
+ memcpy(&spd[0], spd_file, 128);
+ /* C0S0 is a DIMM slot. */
+ read_spd(&spd[1], 0x51);
+ }
+
+If several slots are soldered there are 3 ways of doing things:
+
+* If all of them are the same use the same file. Don't forget to copy
+it to all array elements.
+* Use several files (recommended). Name them e.g. spd1, spd2,...
+* Concatenate it into a single file and split into several
+array elements on runtime. Not recommended
+
+### `board_info.txt`
+
+`board_info.txt` is a simple text file used to generate wiki page
+listing supported boards. Some of the info can't be detected automatically.
+
+As this is used only to present information to users then when it matches
+your board and definitions it is correct.
+
+* Which package is used for ROM and whether it's socketed, as well
+as release year. For ROM package refer to <http://flashrom.org/Technology>
+and compare it with ROM you found at the beginning of the port. Set
+`ROM package`, `ROM socketed` and other variables mentioned in FIXME.
+* Release year, just go to web and find that information.
+* Category. It's difficult to make difference between desktop and similar
+categories from inside the computer. Valid categories are:
+ * `desktop`. Desktops and workstations.
+ * `server`. Servers
+ * `laptop`. Laptops.
+ * `half`. Embedded / PC/104 / Half-size boards.
+ * `mini`. Mini-ITX / Micro-ITX / Nano-ITX
+ * `settop`. Set-top-boxes / Thin clients.
+ * `eval`. Devel/Eval Boards
+ * `sbc`. Single-Board computer.
+ * `emulation`. Virtual machines and emulators. May require especial care
+ as they often behave differently from real counterparts.
+ * `misc`. Anything not fitting the categories above. You probably shouldn't use
+ this.
+
+### `USBDEBUG_HCD_INDEX`
+
+Which controller the most easily accessible USB debug port is. On intel
+1 is for `00:1d.0` and 2 is `00:1a.0` (yes, it's reversed). See
+<http://www.coreboot.org/EHCI_Debug_Port> for more info.
+
+If you're able to use EHCI debug port without setting HCD index manually
+in config this is correct.
+
+### `BOARD_ROMSIZE_KB_2048`
+
+Default rom size should be detected automatically but sometimes isn't.
+If yours weren't detected put correct rom size here to serve as sane
+default when configuring coreboot.
+
+If default ROM size when slecting the board is right one than this value
+is correct.
+
+### `DRAM_RESET_GATE_GPIO`
+
+When machine is going to S3 in order not to reset the RAM modules, the
+reset signal must be filtered out from reachin RAM. This is done by
+powering down a special gate. Most manufacturers put this gate on
+GPIO 60 but Lenovo is knowon to put it on GPIO 10. If you're able to
+go to S3 and back than this value is correct.
+
+## GNVS
+
+`acpi_create_gnvs` sets values in GNVS which in turn is used by ACPI for
+various power-related functions. Normally there is no need to modify it
+but it makes sense to proofread it.
+
+## `gfx.ndid` and `gfx.did`
+
+Those describe which video outputs are declared in ACPI tables.
+Normally there is no need to adjust but if you miss some nonstandard output
+you can declare it there. Bit 31 is set to indicate presence of the output.
+Byte 1 is the type and byte 0 is used for disambigution so that ID composed of
+byte 1 and 0 is unique. Types are
+
+* 1 = VGA
+* 2 = TV
+* 3 = DVI
+* 4 = LCD
+
+## `c*_acpower` and `c*_battery`
+
+Which mwait states to match to which ACPI levels. Normally no need to modify unless
+your device has very special power saving requirements.
+
+## `install_intel_vga_int15_handler`
+
+This is used to configure int15 hook used by vga bios. Parameters 2 and 3 usually
+shouldn't be modified as vgabios is quite ok to figure panel fit and active output
+by itself. Last number is the numerical ID of display type. If you don't get any output
+with VGABIOS you should try different values for 4th parameter. If it doesn't help
+try different values for first parameter as well
+
+## CMOS options
+
+Due to horrible state of CMOS support in coreboot tree, autoport doesn't support it and
+this probably won't change until format in the tree improves. If you really care about
+CMOS options:
+
+* Create files `cmos.layout` and `cmos.default`
+* Enable `HAVE_OPTION_TABLE` and `HAVE_CMOS_DEFAULT` in `Kconfig`
+
+## EC (lenovo)
+
+You need to set `has_keyboard_backlight` (backlit keyboard like X230),
+`has_power_management_beeps` (optional beeps when e.g. plugging the cord
+in) and `has_uwb` (third MiniPCIe slot) in accordance to functions available
+on your machine
+
+In rare cases autoport is unable to detect GPE. You can detect it from
+dmesg or ACPI tables. Look for line in dmesg like
+
+ ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
+
+This means that GPE is `0x11` in ACPI notation. This is the correct
+value for `THINKPAD_EC_GPE`. To get the correct value for `GPE_EC_SCI`
+you need to substract `0x10`, so value for it is `1`.
+
+The pin used to wake the machine from EC is guessed. If your machine doesn't
+wake on lid open and pressing of Fn, change `GPE_EC_WAKE`.
+
+Keep `GPE_EC_WAKE` and `GPE_EC_SCI` in sync with `gpi*_routing`.
+`gpi*_routing` matching `GPE_EC_WAKE` or `GPE_EC_SCI` is set to `2`
+and all others are absent.
+
+If your dock has LPC wires or needs some special treatement you
+need to fill `h8_mainboard_init_dock` and add support code to
+DSDT. See the code for `x60`, `x200` or `x201`
+
+## EC (generic laptop)
+
+Almost any laptop has an embedded controller. In nutshell it's a small
+low-powered computer specialised on managing power for laptop. Exact
+functionality differs between macines but of interest to us is mainly:
+
+* Control of power and rfkill to different component
+* Keyboard (PS/2) interface implementation
+* Battery, AC, LID and thermal information exporting
+* Hotkey support
+
+autoport automatically attempts to restore the dumped config but it
+may or may not work and may even lead to a hang or powerdown. If your
+machine stops at `Replaying EC dump ...` try commenting EC replay out
+
+autoport tries to detect if machine has PS/2 interface and if so calls
+`pc_keyboard_init` and exports relevant ACPI objects. If detection fails
+you may have to add them yourself
+
+ACPI methods `_PTS` (prepare to sleep) and `_WAK` (wake) are executed
+when transitioning to sleep or wake state respectively. You may need to
+add power-related calls there to either shutdown some components or to
+add a workaround to stop giving OS thermal info until next refresh.
+
+For exporting the battery/AC/LID/hotkey/thermal info you need to write
+`acpi/ec.asl`. For an easy example look into `apple/macbook21` or
+`packardbell/ms2290`. For information about needed methods consult
+relevant ACPI specs. Tracing which EC events can be done using
+[dynamic debug](https://wiki.ubuntu.com/Kernel/Reference/ACPITricksAndTips)
+
+EC GPE needs to be routed to SCI in order for OS in order to receive
+EC events like "hotkey X pressed" or "AC plugged". autoport attempts
+to detect GPE but in rare cases may fail. You can detect it from
+dmesg or ACPI tables. Look for line in dmesg like
+
+ ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
+
+This means that GPE is `0x11` in ACPI notation. This is the correct
+value for `_GPE`.
+
+Keep GPE in sync with `gpi*_routing`.
+`gpi*_routing` matching `GPE - 0x10` is set to `2`
+and all others are absent. If EC has separate wake pin
+then this GPE needs to be routed as well
diff --git a/util/autoport/root.go b/util/autoport/root.go
new file mode 100644
index 0000000..ca75d4b
--- /dev/null
+++ b/util/autoport/root.go
@@ -0,0 +1,42 @@
+package main
+
+import "fmt"
+
+var supportedPCIDevices map[uint32]PCIDevice = map[uint32]PCIDevice{}
+var PCIMap map[PCIAddr]PCIDevData = map[PCIAddr]PCIDevData{}
+
+func ScanRoot(ctx Context) {
+ for _, pciDev := range ctx.InfoSource.GetPCIList() {
+ PCIMap[pciDev.PCIAddr] = pciDev
+ }
+ for _, pciDev := range ctx.InfoSource.GetPCIList() {
+ vendevid := (uint32(pciDev.PCIDevID) << 16) | uint32(pciDev.PCIVenID)
+
+ dev, ok := supportedPCIDevices[vendevid]
+ if !ok {
+ if pciDev.PCIAddr.Bus != 0 {
+ fmt.Printf("Unknown PCI device %04x:%04x, assuming removable\n",
+ pciDev.PCIVenID, pciDev.PCIDevID)
+ continue
+ }
+ fmt.Printf("Unsupported PCI device %04x:%04x\n",
+ pciDev.PCIVenID, pciDev.PCIDevID)
+ dev = GenericPCI{Comment: fmt.Sprintf("Unsupported PCI device %04x:%04x",
+ pciDev.PCIVenID, pciDev.PCIDevID)}
+ }
+ dev.Scan(ctx, pciDev)
+ }
+ dmi := ctx.InfoSource.GetDMI()
+ if !dmi.IsLaptop {
+ NoEC(ctx)
+ } else if dmi.Vendor == "LENOVO" {
+ LenovoEC(ctx)
+ } else {
+ FIXMEEC(ctx)
+ }
+}
+
+func RegisterPCI(VenID uint16, DevID uint16, dev PCIDevice) {
+ vendevid := (uint32(DevID) << 16) | uint32(VenID)
+ supportedPCIDevices[vendevid] = dev
+}
diff --git a/util/autoport/sandybridge.go b/util/autoport/sandybridge.go
new file mode 100644
index 0000000..838475e
--- /dev/null
+++ b/util/autoport/sandybridge.go
@@ -0,0 +1,159 @@
+package main
+
+type sandybridgemc struct {
+ variant string
+}
+
+func (i sandybridgemc) Scan(ctx Context, addr PCIDevData) {
+ inteltool := ctx.InfoSource.GetInteltool()
+
+ /* FIXME:XX Move this somewhere else. */
+ MainboardIncludes = append(MainboardIncludes, "drivers/intel/gma/int15.h")
+ MainboardEnable += (` /* FIXME: fix those values*/
+ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
+`)
+
+ pchLVDS := inteltool.IGD[0xe1180]
+ dualChannel := pchLVDS&(3<<2) == (3 << 2)
+ pipe := (pchLVDS >> 30) & 1
+ data_m1 := inteltool.IGD[0x60030+0x1000*pipe] & 0xffffff
+ data_n1 := inteltool.IGD[0x60034+0x1000*pipe]
+ link_m1 := inteltool.IGD[0x60040+0x1000*pipe]
+ link_n1 := inteltool.IGD[0x60044+0x1000*pipe]
+ data_factor := float32(data_m1) / float32(data_n1)
+ link_factor := float32(link_m1) / float32(link_n1)
+ num_lanes := uint32((link_factor/data_factor)*18.0/8.0 + 0.5)
+ fp0 := inteltool.IGD[0xc6040+8*pipe]
+ dpll := inteltool.IGD[0xc6014+4*pipe]
+ pixel_m2 := fp0 & 0xff
+ pixel_m1 := (fp0>>8)&0xff + 2
+ pixel_p1 := uint32(1)
+ for i := dpll & 0x1ffff; i != 0 && i&1 == 0; i >>= 1 {
+ pixel_p1++
+ }
+ pixel_n := ((fp0 >> 16) & 0xff) + 2
+ pixel_frequency := float32(120000*(5*pixel_m1+pixel_m2)) / float32(pixel_n*pixel_p1*7.0)
+ if !dualChannel {
+ pixel_frequency /= 2
+ }
+ link_frequency := pixel_frequency / link_factor
+ DevTree = DevTreeNode{
+ Chip: "northbridge/intel/sandybridge",
+ MissingParent: "northbridge",
+ Comment: "FIXME: check gfx.ndid and gfx.did",
+ Registers: map[string]string{
+ "gpu_dp_b_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 2) & 7),
+ "gpu_dp_c_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 10) & 7),
+ "gpu_dp_d_hotplug": FormatInt32((inteltool.IGD[0xc4030] >> 18) & 7),
+ "gpu_panel_port_select": FormatInt32((inteltool.IGD[0xc7208] >> 30) & 3),
+ "gpu_panel_power_up_delay": FormatInt32((inteltool.IGD[0xc7208] >> 16) & 0x1fff),
+ "gpu_panel_power_backlight_on_delay": FormatInt32(inteltool.IGD[0xc7208] & 0x1fff),
+ "gpu_panel_power_down_delay": FormatInt32((inteltool.IGD[0xc720c] >> 16) & 0x1fff),
+ "gpu_panel_power_backlight_off_delay": FormatInt32(inteltool.IGD[0xc720c] & 0x1fff),
+ "gpu_panel_power_cycle_delay": FormatInt32(inteltool.IGD[0xc7210] & 0xff),
+ "gpu_cpu_backlight": FormatHex32(inteltool.IGD[0x48254]),
+ "gpu_pch_backlight": FormatHex32((inteltool.IGD[0xc8254] >> 16) * 0x10001),
+ "gfx.use_spread_spectrum_clock": FormatBool((inteltool.IGD[0xc6200]>>12)&1 != 0),
+ "gfx.lvds_dual_channel": FormatBool(dualChannel),
+ "gfx.lvds_num_lanes": FormatInt32(num_lanes),
+ "gfx.link_frequency_270_mhz": FormatBool(link_frequency > 200000),
+ /* FIXME:XX hardcoded. */
+ "gfx.ndid": "3",
+ "gfx.did": "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }",
+ },
+ Children: []DevTreeNode{
+ {
+ Chip: "cpu_cluster",
+ Dev: 0,
+ Children: []DevTreeNode{
+ {
+ Chip: "cpu/intel/socket_rPGA989",
+ Children: []DevTreeNode{
+ {
+ Chip: "lapic",
+ Dev: 0,
+ },
+ },
+ },
+
+ {
+ Chip: "cpu/intel/model_206ax",
+ Comment: "FIXME: check all registers",
+ Registers: map[string]string{
+ /* FIXME:XX hardcoded. */
+ "c1_acpower": "1",
+ "c2_acpower": "3",
+ "c3_acpower": "5",
+ "c1_battery": "1",
+ "c2_battery": "3",
+ "c3_battery": "5",
+ },
+ Children: []DevTreeNode{
+ {
+ Chip: "lapic",
+ Dev: 0xacac,
+ Disabled: true,
+ },
+ },
+ },
+ },
+ },
+
+ {
+ Chip: "domain",
+ Dev: 0,
+ PCIController: true,
+ ChildPCIBus: 0,
+ PCISlots: []PCISlot{
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x0, Func: 0}, writeEmpty: true, additionalComment: "Host bridge"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x1, Func: 0}, writeEmpty: true, additionalComment: "PCIe Bridge for discrete graphics"},
+ PCISlot{PCIAddr: PCIAddr{Dev: 0x2, Func: 0}, writeEmpty: true, additionalComment: "Internal graphics"},
+ },
+ },
+ },
+ }
+
+ PutPCIDev(addr, "Host bridge")
+
+ /* FIXME:XX Move part to northbridge? */
+ /* FIXME:XX some configs are unsupported. */
+ KconfigBool["MAINBOARD_HAS_NATIVE_VGA_INIT"] = true
+ KconfigBool["MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG"] = true
+ KconfigBool[i.variant+"BRIDGE_LVDS"] = true
+
+ KconfigBool["VGA"] = true
+ KconfigBool["INTEL_EDID"] = true
+ KconfigBool["CPU_INTEL_SOCKET_RPGA989"] = true
+ KconfigBool["NORTHBRIDGE_INTEL_"+i.variant+"BRIDGE_NATIVE"] = true
+ KconfigBool["INTEL_INT15"] = true
+ KconfigBool["HAVE_ACPI_TABLES"] = true
+ KconfigBool["HAVE_ACPI_RESUME"] = true
+
+ KconfigBool["HAVE_IFD_BIN"] = false
+ KconfigBool["HAVE_ME_BIN"] = false
+
+ KconfigHex["MMCONF_BASE_ADDRESS"] = 0xf0000000
+ KconfigInt["MAX_CPUS"] = 8
+
+ DSDTIncludes = append(DSDTIncludes, DSDTInclude{
+ File: "cpu/intel/model_206ax/acpi/cpu.asl",
+ })
+
+ DSDTPCI0Includes = append(DSDTPCI0Includes, DSDTInclude{
+ File: "northbridge/intel/sandybridge/acpi/sandybridge.asl",
+ })
+}
+
+func init() {
+ RegisterPCI(0x8086, 0x0100, sandybridgemc{variant: "SANDY"})
+ RegisterPCI(0x8086, 0x0104, sandybridgemc{variant: "SANDY"})
+ RegisterPCI(0x8086, 0x0150, sandybridgemc{variant: "IVY"})
+ RegisterPCI(0x8086, 0x0154, sandybridgemc{variant: "IVY"})
+ for _, id := range []uint16{
+ 0x0102, 0x0106, 0x010a, 0x0112,
+ 0x0116, 0x0122, 0x0126, 0x0156,
+ 0x0166,
+ } {
+ RegisterPCI(0x8086, id, GenericVGA{GenericPCI{Comment: "VGA controller"}})
+ }
+}