src: Fix various spelling and whitespace issues.
This fixes some spelling and whitespace issues that I came across
while working on various things in the tree.
There are no functional changes.
Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/src/cpu/x86/mtrr/mtrr.c b/src/cpu/x86/mtrr/mtrr.c
index ed5613c..efd0b68 100644
--- a/src/cpu/x86/mtrr/mtrr.c
+++ b/src/cpu/x86/mtrr/mtrr.c
@@ -92,7 +92,7 @@
wrmsr(MTRR_DEF_TYPE_MSR, msr);
}
-/* fms: find most sigificant bit set, stolen from Linux Kernel Source. */
+/* fms: find most significant bit set, stolen from Linux Kernel Source. */
static inline unsigned int fms(unsigned int x)
{
int r;
@@ -209,7 +209,7 @@
filter_vga_wrcomb);
/* The address space below 4GiB is special. It needs to be
- * covered entirly by range entries so that MTRR calculations
+ * covered entirely by range entries so that MTRR calculations
* can be properly done for the full 32-bit address space.
* Therefore, ensure holes are filled up to 4GiB as
* uncacheable */
diff --git a/src/mainboard/amd/dinar/gpio.c b/src/mainboard/amd/dinar/gpio.c
index 6cd85e3..17097b3 100644
--- a/src/mainboard/amd/dinar/gpio.c
+++ b/src/mainboard/amd/dinar/gpio.c
@@ -90,7 +90,7 @@
for (Index = 0; Index < MAX_GPIO_NO; Index++) {
if (!(((Index >= GPIO_RSVD_ZONE0_S) && (Index <= GPIO_RSVD_ZONE0_E)) || ((Index >= GPIO_RSVD_ZONE1_S) && (Index <= GPIO_RSVD_ZONE1_E)))) {
if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) {
- // Configure multi-funtion
+ // Configure multi-function
Mmio8_And_Or (IoMuxMmioAddr, Index, 0x00, (gpio_table[Index].select & ~NonGpio));
}
// Configure GPIO
diff --git a/src/mainboard/amd/torpedo/gpio.c b/src/mainboard/amd/torpedo/gpio.c
index 0078769..b9fe745 100644
--- a/src/mainboard/amd/torpedo/gpio.c
+++ b/src/mainboard/amd/torpedo/gpio.c
@@ -88,7 +88,7 @@
for (Index = 0; Index < MAX_GPIO_NO; Index++) {
if (!(((Index >= GPIO_RSVD_ZONE0_S) && (Index <= GPIO_RSVD_ZONE0_E)) || ((Index >= GPIO_RSVD_ZONE1_S) && (Index <= GPIO_RSVD_ZONE1_E)))) {
if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) {
- // Configure multi-funtion
+ // Configure multi-function
Mmio8_And_Or (IoMuxMmioAddr, Index, 0x00, (gpio_table[Index].select & ~NonGpio));
}
// Configure GPIO
diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c
index f258cca..cd4b9fb 100644
--- a/src/northbridge/amd/amdk8/raminit_f.c
+++ b/src/northbridge/amd/amdk8/raminit_f.c
@@ -64,7 +64,7 @@
Write:
- Write the data to DctOffsetData
- Write register num to DctOffset with DctAccessWrite = 1
- - poll the DctAccessDone untio it = 1
+ - poll the DctAccessDone until it = 1
*/
@@ -153,7 +153,7 @@
* 100 = reserved
* 101 = reserved
* 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * 111 = Interleave on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
@@ -232,7 +232,7 @@
* 100 = 2.5 Memory Clocks
* 101 = 3 Memory Clocks
* 110 = 3.5 Memory Clocks
- * 111 = Reseved
+ * 111 = Reserved
* [15: 7] Reserved
* [16:16] AltVidC3MemClkTriEn (AltVID Memory Clock Tristate Enable)
* Enables the DDR memory clocks to be tristated when alternate VID
@@ -244,19 +244,19 @@
* [18:18] DqsRcvEnTrain (DQS Receiver Enable Training Mode)
* 0 = Normal DQS Receiver enable operation
* 1 = DQS receiver enable training mode
- * [31:19] reverved
+ * [31:19] reserved
*/
PCI_ADDR(0, 0x18, 2, 0x78), 0xfff80000, (6<<4)|(6<<0),
/* DRAM Initialization Register
* F2:0x7C
* [15: 0] MrsAddress (Address for MRS/EMRS Commands)
- * this field specifies the dsata driven on the DRAM address pins
+ * this field specifies the data driven on the DRAM address pins
* 15-0 for MRS and EMRS commands
* [18:16] MrsBank (Bank Address for MRS/EMRS Commands)
* this files specifies the data driven on the DRAM bank pins for
* the MRS and EMRS commands
- * [23:19] reverved
+ * [23:19] reserved
* [24:24] SendPchgAll (Send Precharge All Command)
* Setting this bit causes the DRAM controller to send a precharge
* all command. This bit is cleared by the hardware after the
@@ -268,7 +268,7 @@
* [26:26] SendMrsCmd (Send MRS/EMRS Command)
* Setting this bit causes the DRAM controller to send the MRS or
* EMRS command defined by the MrsAddress and MrsBank fields. This
- * bit is cleared by the hardware adter the commmand completes
+ * bit is cleared by the hardware after the command completes
* [27:27] DeassertMemRstX (De-assert Memory Reset)
* Setting this bit causes the DRAM controller to de-assert the
* memory reset pin. This bit cannot be used to assert the memory
@@ -276,7 +276,7 @@
* [28:28] AssertCke (Assert CKE)
* setting this bit causes the DRAM controller to assert the CKE
* pins. This bit cannot be used to de-assert the CKE pins
- * [30:29] reverved
+ * [30:29] reserved
* [31:31] EnDramInit (Enable DRAM Initialization)
* Setting this bit puts the DRAM controller in a BIOS controlled
* DRAM initialization mode. BIOS must clear this bit aster DRAM
@@ -388,7 +388,7 @@
* 111 = 9 bus clocks
* [ 7: 7] Reserved
* [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay,
- * minium write-to-read delay when both access the same chip select)
+ * Minimum write-to-read delay when both access the same chip select)
* 00 = Reserved
* 01 = 1 bus clocks
* 10 = 2 bus clocks
@@ -408,7 +408,7 @@
* 00 = 2 bus clocks ( 1 idle cycle on the bus)
* 01 = 3 bus clocks ( 2 idle cycles on the bus)
* 10 = 4 bus clocks ( 3 idle cycles on the bus)
- * 11 = 5 bus clocks ( 4 idel cycles on the bus)
+ * 11 = 5 bus clocks ( 4 idle cycles on the bus)
* [17:16] Tref (Refresh Rate)
* 00 = Undefined behavior
* 01 = Reserved
@@ -487,7 +487,7 @@
* 010 = 333MHz
* 011 = reserved
* 1xx = reserved
- * [ 3: 3] MemClkFreqVal (Memory Clock Freqency Valid)
+ * [ 3: 3] MemClkFreqVal (Memory Clock Frequency Valid)
* 1 = BIOS need to set the bit when setting up MemClkFreq to
* the proper value
* [ 7: 4] MaxAsyncLat ( Maximum Asynchronous Latency)
@@ -523,7 +523,7 @@
* MEMCLK cycle
* 1 = One additional MEMCLK of setup time is provided on all
* DRAM address and control signals except CS, CKE, and ODT;
- * i.e., these signals are drivern for two MEMCLK cycles
+ * i.e., these signals are driven for two MEMCLK cycles
* rather than one
* [21:21] Reserved
* [22:22] BankSwizzleMode ( Bank Swizzle Mode),
@@ -565,7 +565,7 @@
* 1 When bit enables support for mismatched DIMMs when using
* 128-bit DRAM interface, the Width128 no effect, only for
* AM2 and s1g1
- * [ 5: 5] DCC_EN ( Dynamica Idle Cycle Counter Enable)
+ * [ 5: 5] DCC_EN ( Dynamic Idle Cycle Counter Enable)
* When set to 1, indicates that each entry in the page tables
* dynamically adjusts the idle cycle limit based on page
* Conflict/Page Miss (PC/PM) traffic
@@ -581,7 +581,7 @@
* [ 9: 9] DramEnabled ( DRAM Enabled)
* When Set, this bit indicates that the DRAM is enabled, this
* bit is set by hardware after DRAM initialization or on an exit
- * from self refresh. The DRAM controller is intialized after the
+ * from self refresh. The DRAM controller is initialized after the
* hardware-controlled initialization process ( initiated by the
* F2 0x90[DramInit]) completes or when the BIOS-controlled
* initialization process completes (F2 0x7c(EnDramInit] is
@@ -603,7 +603,7 @@
/* DRAM Scrub Control Register
* F3:0x58
- * [ 4: 0] DRAM Scrube Rate
+ * [ 4: 0] DRAM Scrub Rate
* [ 7: 5] reserved
* [12: 8] L2 Scrub Rate
* [15:13] reserved
@@ -646,7 +646,7 @@
PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
/* DRAM Scrub Address High Register
* F3:0x60
- * [ 7: 0] DRAM Scrubb Address 39-32
+ * [ 7: 0] DRAM Scrub Address 39-32
* [31: 8] Reserved
*/
PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
@@ -673,7 +673,7 @@
Write:
- Write the data to DctOffsetData
- Write register num to DctOffset with DctAccessWrite = 1
- - poll the DctAccessDone untio it = 1
+ - poll the DctAccessDone until it = 1
*/
int i;
@@ -1161,7 +1161,7 @@
csbase_inc <<=1;
}
- /* Compute the initial values for csbase and csbask.
+ /* Compute the initial values for csbase and csmask.
* In csbase just set the enable bit and the base to zero.
* In csmask set the mask bits for the size and page level interleave.
*/
@@ -1196,7 +1196,7 @@
/* Remember which registers we have used in the high 8 bits of tom */
tom = 0;
for (;;) {
- /* Find the largest remaining canidate */
+ /* Find the largest remaining candidate */
unsigned index, canidate;
uint32_t csbase, csmask;
unsigned size;
@@ -1220,12 +1220,12 @@
if (tom & (1 << (index + 24))) {
continue;
}
- /* I have a new canidate */
+ /* I have a new candidate */
csbase = value;
canidate = index;
}
- /* See if I have found a new canidate */
+ /* See if I have found a new candidate */
if (csbase == 0) {
break;
}
@@ -1352,7 +1352,7 @@
if (is_opteron(ctrl)) {
#if 0
if ( registered != (meminfo->dimm_mask & ((1<<DIMM_SOCKETS)-1)) ) {
- meminfo->dimm_mask &= (registered | (registered << DIMM_SOCKETS) ); //disable unbuffed dimm
+ meminfo->dimm_mask &= (registered | (registered << DIMM_SOCKETS) ); //disable unbuffered dimm
// die("Mixed buffered and registered dimms not supported");
}
//By yhlu for debug M2, s1g1 can do dual channel, but it use unbuffer DIMM
@@ -1503,7 +1503,7 @@
printk(BIOS_SPEW, "Enabling dual channel memory\n");
dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
dcl &= ~DCL_BurstLength32; /* 32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses
- 32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode */
+ 32byte mode is not supported when the DRAM interface is 128 bits wide, even 32byte mode is set, system still use 64 byte mode */
dcl |= DCL_Width128;
pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
meminfo->is_Width128 = 1;
@@ -1720,8 +1720,8 @@
/* Compute the lowest cas latency which can be expressed in this
* particular SPD EEPROM. You can store at most settings for 3
* contiguous CAS latencies, so by taking the highest CAS
- * latency maked as supported in the SPD and subtracting 2 you
- * get the lowest expressable CAS latency. That latency is not
+ * latency marked as supported in the SPD and subtracting 2 you
+ * get the lowest expressible CAS latency. That latency is not
* necessarily supported, but a (maybe invalid) entry exists
* for it.
*/
@@ -2495,7 +2495,7 @@
dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
dch &= ~(DCH_MaxAsyncLat_MASK << DCH_MaxAsyncLat_SHIFT);
- //FIXME: We need to use Max of DqsRcvEnDelay + 6ns here: After trainning and get that from index reg 0x10, 0x13, 0x16, 0x19, 0x30, 0x33, 0x36, 0x39
+ //FIXME: We need to use Max of DqsRcvEnDelay + 6ns here: After training and get that from index reg 0x10, 0x13, 0x16, 0x19, 0x30, 0x33, 0x36, 0x39
async_lat = 6 + 6;
@@ -2873,7 +2873,7 @@
if (meminfo->dimm_mask == -1)
goto hw_spd_err;
- //store memclk set to sysinfo, incase we need rebuilt param again
+ //store memclk set to sysinfo, in case we need rebuilt param again
meminfo->memclk_set = param->dch_memclk;
memcpy(¶mx, param, sizeof(paramx));
diff --git a/src/northbridge/amd/amdk8/raminit_f_dqs.c b/src/northbridge/amd/amdk8/raminit_f_dqs.c
index 23ec60d..0b777d1 100644
--- a/src/northbridge/amd/amdk8/raminit_f_dqs.c
+++ b/src/northbridge/amd/amdk8/raminit_f_dqs.c
@@ -585,7 +585,7 @@
print_debug_dqs("\tTrainRcvEn51: channel ",channel, 1);
/* for each rank */
- /* there are four recriver pairs, loosely associated with CS */
+ /* there are four receiver pairs, loosely associated with CS */
for( receiver = 0; (receiver < 8) && (!Errors); receiver+=2)
{
@@ -664,14 +664,14 @@
/* FIXME: 64bit MUX */
if(is_Width128) {
- /* Program current Receiver enable delay chaannel b */
+ /* Program current Receiver enable delay channel b */
pci_write_config32_index_wait(ctrl->f2, 0x98, index+ 0x20, RcvrEnDly);
}
/* Program the MaxAsyncLat filed with the
current DQS receiver enable setting plus 6ns
*/
- /*Porgram MaxAsyncLat to correspond with current delay */
+ /* Program MaxAsyncLat to correspond with current delay */
SetMaxAL_RcvrDly(ctrl, RcvrEnDly);
CurrTest = DQS_FAIL;
@@ -688,7 +688,7 @@
if(Test0 == DQS_PASS) {
Read1LTestPattern(TestAddr0B);
- Test1 = CompareTestPatternQW0(channel, TestAddr0B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128);
+ Test1 = CompareTestPatternQW0(channel, TestAddr0B, PatternB, TestPattern0, TestPattern1, TestPattern2, Pass, is_Width128);
proc_IOCLFLUSH(TestAddr0B);
ResetDCTWrPtr(ctrl);
@@ -755,7 +755,7 @@
}
if(Pass == DQS_FIRST_PASS) {
- // We need a better value for DQSPos trainning
+ // We need a better value for DQSPos training
RcvrEnDly = RcvrEnDlyRmin /* + RCVREN_MARGIN * T1000/64/50 */;
} else {
RcvrEnDly = RcvrEnDlyRmin;
@@ -1641,7 +1641,7 @@
}
-/* fms: find most sigificant bit set, stolen from Linux Kernel Source. */
+/* fms: find most significant bit set, stolen from Linux Kernel Source. */
static inline unsigned int fms(unsigned int x)
{
int r;
@@ -1653,7 +1653,7 @@
return r;
}
-/* fls: find least sigificant bit set */
+/* fls: find least significant bit set */
static inline unsigned int fls(unsigned int x)
{
int r;
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h b/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
index 4de7af0..2bd39f9 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mwlc_d.h
@@ -34,12 +34,12 @@
#define DCT_STATUS_LOAD_REDUCED 4 /* Load-Reduced DIMMs support */
#define DCT_STATUS_OnDimmMirror 24 /* OnDimmMirror support */
-/* PCI Defintions */
-#define FUN_HT 0 /* Funtion 0 Access */
-#define FUN_MAP 1 /* Funtion 1 Access */
-#define FUN_DCT 2 /* Funtion 2 Access */
-#define FUN_MISC 3 /* Funtion 3 Access */
-#define FUN_ADD_DCT 0xF /* Funtion 2 Additional Register Access */
+/* PCI Definitions */
+#define FUN_HT 0 /* Function 0 Access */
+#define FUN_MAP 1 /* Function 1 Access */
+#define FUN_DCT 2 /* Function 2 Access */
+#define FUN_MISC 3 /* Function 3 Access */
+#define FUN_ADD_DCT 0xF /* Function 2 Additional Register Access */
#define BOTH_DCTS 2 /* The access is independent of DCTs */
#define PCI_MIN_LOW 0 /* Lowest possible PCI register location */
#define PCI_MAX_HIGH 31 /* Highest possible PCI register location */
@@ -60,7 +60,7 @@
#define DRAM_CONT_ADD_ECC_PHASE_REC_CTRL 0x52
#define DRAM_CONT_ADD_WRITE_LEV_ERROR_REG 0x53
-/* CPU Register defintions */
+/* CPU Register definitions */
/* Register Bit Location */
#define DctAccessDone 31
@@ -155,7 +155,7 @@
u8 ErrStatus[MAX_ERRORS]; /* Minor Error codes for DCT0 and 1 */
u8 DimmValid[MAX_TOTAL_DIMMS]; /* Indicates which DIMMs are valid for */
/* Total Number of DIMMs(per Node) */
- u8 WLTotalDelay[MAX_BYTE_LANES];/* Write Levelization Toral Delay */
+ u8 WLTotalDelay[MAX_BYTE_LANES];/* Write Levelization Total Delay */
/* per byte lane */
u8 MaxDimmsInstalled; /* Max Dimms Installed for current DCT */
u8 DimmRanks[MAX_TOTAL_DIMMS]; /* Total Number of Ranks(per Dimm) */