|author||Maxim Polyakov <email@example.com>||Wed Dec 04 19:38:12 2019 +0300|
|committer||Felix Held <firstname.lastname@example.org>||Thu Dec 05 15:25:03 2019 +0000|
mb/asrock/h110m: disable CLKREQ to use onboard LAN The PCH uses the SRCCLKREQ# pin to detect PCIe device in the slot in order to send clock signal to it. However, this logic is not required for the Realtek LAN device, since this chip is soldered to the board and always uses clocking. The chipset can't receive the clock request signal (most likely this pin isn't connected) and doesn't enable the CLK. For this reason, the device is broken during the initialization phase. The patch disables clock request logic for the PCH PCIe port 6 to initialize the onboard LAN device correctly. Change-Id: I5cbce6177c89052eb50959f43903b6f8a607e77f Signed-off-by: Maxim Polyakov <email@example.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36377 Reviewed-by: Patrick Rudolph <firstname.lastname@example.org> Tested-by: build bot (Jenkins) <email@example.com>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case).
Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.