mb/google/nissa/var/sundance: Update eMMC DLL settings
Currently Samsung eMMC (KLMBG2JETD-B041) can't power on to OS nomally.
According to Intel provides eMMC DLL delay patch that tuning on each
Sundance different eMMC system to modify some system can't boot to OS problem.
BUG=b:342057438
TEST=Build and check each SKU eMMC can work.
Change-Id: I29d4305bbe5f91d822d947cae942b654e80a8a57
Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82602
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
diff --git a/src/mainboard/google/brya/variants/sundance/overridetree.cb b/src/mainboard/google/brya/variants/sundance/overridetree.cb
index 2f944d4..b4c7b5e 100644
--- a/src/mainboard/google/brya/variants/sundance/overridetree.cb
+++ b/src/mainboard/google/brya/variants/sundance/overridetree.cb
@@ -9,6 +9,51 @@
register "sagv" = "SaGv_Enabled"
+ # EMMC Tx CMD Delay
+ # Refer to EDS-Vol2-42.3.7.
+ # [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39, total 625ps.
+ # [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39, total 625ps.
+ register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
+
+ # EMMC TX DATA Delay 1
+ # Refer to EDS-Vol2-42.3.8.
+ # [14:8] steps of delay for HS400, each 125ps, range: 0 - 78, total 465ps.
+ # [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79, total 465ps.
+ register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x909"
+
+ # EMMC TX DATA Delay 2
+ # Refer to EDS-Vol2-42.3.9.
+ # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79, total 3500ps.
+ # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78, total 5250ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79, total 5000ps.
+ # [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79, total 5000ps.
+ register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C2A2828"
+
+ # EMMC RX CMD/DATA Delay 1
+ # Refer to EDS-Vol2-42.3.10.
+ # [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119, total 3500ps.
+ # [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78, total 3375ps.
+ # [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119, total 3250ps.
+ # [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119, total 3375ps.
+ register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C1B1A1B"
+
+ # EMMC RX CMD/DATA Delay 2
+ # Refer to EDS-Vol2-42.3.12.
+ # [17:16] stands for Rx Clock before Output Buffer,
+ # 00: Rx clock after output buffer,
+ # 01: Rx clock before output buffer,
+ # 10: Automatic selection based on working mode.
+ # 11: Reserved
+ # [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39, total 0ps.
+ # [6:0] steps of delay for HS200, each 125ps, range: 0 - 79, total 5000ps.
+ register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x10028"
+
+ # EMMC Rx Strobe Delay
+ # Refer to EDS-Vol2-42.3.11.
+ # [14:8] Rx Strobe Delay DLL 1 (HS400 Mode), each 125ps, range: 0 - 39, total 2625ps.
+ # [6:0] Rx Strobe Delay DLL 2 (HS400 Mode), each 125ps, range: 0 - 39, total 2625ps.
+ register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x11515"
+
# SOC Aux orientation override:
# This is a bitfield that corresponds to up to 4 TCSS ports.
# Bits (0,1) allocated for TCSS Port1 configuration and Bits (2,3)for TCSS Port2.