mainboard/intel/kblrvp: Enabling Kaby Lake RVP7
Add support for Kaby Lake RVP7 board
* Add RVP7 board support in Kconfig
* Override default descriptor and ME binary paths in Kconfig
since those binaries will differ for RVP3 and RVP7
* Add RVP7 board name in board_info.txt and Kconfig.name
* Add devicetree.cb for RVP7 in the variants path
* Add gpio.h for RVP7 in variants/include/variant path
* Made board specific code for retrieving spd, i.e., in RVP7
there is non-soldered DIMMs, so SPD is read through smbus,
unlike RVP3 where memory DIMMs are soldered down with board.
Hence for RVP3, the spd binaries will be fixed and can be
kept as binary file in cbfs.
BUG=none
BRANCH=none
TEST=Built and boot Kaby Lake RVP7
Change-Id: I6f3d17d857bad1b5cf39f0bc900c760fee72da48
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/17637
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb
new file mode 100644
index 0000000..e79c046
--- /dev/null
+++ b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb
@@ -0,0 +1,267 @@
+chip soc/intel/skylake
+
+ # SATA port 0
+ register "EnableSata" = "1"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsEnable[2]" = "1"
+
+ # Enable deep Sx states
+ register "deep_s5_enable" = "1"
+ register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
+ # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x000c0201"
+
+ # Enable "Intel Speed Shift Technology"
+ register "speed_shift_enable" = "1"
+
+ # Enable DPTF
+ register "dptf_enable" = "1"
+
+ # FSP Configuration
+ register "SmbusEnable" = "1"
+ register "ScsEmmcEnabled" = "1"
+ register "ScsEmmcHs400Enabled" = "1"
+ register "ScsSdCardEnabled" = "2"
+ register "InternalGfx" = "1"
+ register "SkipExtGfxScan" = "1"
+ register "Device4Enable" = "1"
+ register "HeciEnabled" = "0"
+ register "SaGv" = "3"
+ register "PmTimerDisabled" = "1"
+
+ register "pirqa_routing" = "PCH_IRQ11"
+ register "pirqb_routing" = "PCH_IRQ10"
+ register "pirqc_routing" = "PCH_IRQ11"
+ register "pirqd_routing" = "PCH_IRQ11"
+ register "pirqe_routing" = "PCH_IRQ11"
+ register "pirqf_routing" = "PCH_IRQ11"
+ register "pirqg_routing" = "PCH_IRQ11"
+ register "pirqh_routing" = "PCH_IRQ11"
+
+ # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
+ # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
+ register "PmConfigSlpS3MinAssert" = "0x02"
+
+ # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
+ register "PmConfigSlpS4MinAssert" = "0x04"
+
+ # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
+ register "PmConfigSlpSusMinAssert" = "0x03"
+
+ # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
+ register "PmConfigSlpAMinAssert" = "0x03"
+
+ # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled
+ register "SerialIrqConfigSirqEnable" = "0x01"
+
+ # VR Settings Configuration for 5 Domains
+ #+----------------+-------+-------+-------------+-------------+-------+
+ #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
+ #+----------------+-------+-------+-------------+-------------+-------+
+ #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
+ #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
+ #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
+ #| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
+ #| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
+ #| ImonSlope | 0 | 0 | 0 | 0 | 0 |
+ #| ImonOffset | 0 | 0 | 0 | 0 | 0 |
+ #| IccMax | 7A | 34A | 34A | 35A | 35A |
+ #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
+ #+----------------+-------+-------+-------------+-------------+-------+
+ register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+
+ register "domain_vr_config[VR_IA_CORE]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+ register "domain_vr_config[VR_RING]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0, \
+ }"
+
+ register "domain_vr_config[VR_GT_UNSLICED]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0 ,\
+ .voltage_limit = 0x0 \
+ }"
+
+ register "domain_vr_config[VR_GT_SLICED]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+
+ register "FspSkipMpInit" = "1"
+
+ # Enable Root ports.
+ register "PcieRpEnable[2]" = "1"
+ register "PcieRpEnable[3]" = "1"
+ register "PcieRpEnable[4]" = "1"
+ register "PcieRpEnable[5]" = "1"
+ register "PcieRpEnable[8]" = "1"
+
+ # Enable CLKREQ#
+ register "PcieRpClkReqSupport[2]" = "1"
+ register "PcieRpClkReqSupport[3]" = "1"
+ register "PcieRpClkReqSupport[4]" = "1"
+ register "PcieRpClkReqSupport[5]" = "1"
+ register "PcieRpClkReqSupport[8]" = "1"
+
+ # RP 9 uses SRCCLKREQ5#
+ register "PcieRpClkReqNumber[2]" = "5"
+ register "PcieRpClkReqNumber[3]" = "2"
+ register "PcieRpClkReqNumber[4]" = "3"
+ register "PcieRpClkReqNumber[5]" = "4"
+ register "PcieRpClkReqNumber[8]" = "1"
+
+
+ # USB 2.0 Enable all ports
+ register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port
+ register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port
+ register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+
+ # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+
+ register "SerialIoDevMode" = "{ \
+ [PchSerialIoIndexI2C0] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C1] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \
+ [PchSerialIoIndexI2C4] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \
+ [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \
+ [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
+ [PchSerialIoIndexUart0] = PchSerialIoPci, \
+ [PchSerialIoIndexUart1] = PchSerialIoDisabled, \
+ [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
+ }"
+
+ # Send an extra VR mailbox command for the PS4 exit issue
+ register "SendVrMbxCmd" = "2"
+
+ # Enable/Disable VMX feature
+ register "VmxEnable" = "0"
+
+ # Use default SD card detect GPIO configuration
+ register "sdcard_cd_gpio_default" = "GPP_G5"
+
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Integrated Graphics Device
+ device pci 14.0 on end # USB xHCI
+ device pci 14.1 off end # USB xDCI (OTG)
+ device pci 14.2 on end # Thermal Subsystem
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
+ device pci 15.2 off end # I2C #2
+ device pci 15.3 off end # I2C #3
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT Redirection
+ device pci 16.4 off end # Management Engine Interface 3
+ device pci 17.0 on end # SATA
+ device pci 19.0 on end # UART #2
+ device pci 19.1 off end # I2C #5
+ device pci 19.2 on end #
+ device pci 1c.0 on end # PCI Express Port 1
+ device pci 1c.1 off end # PCI Express Port 2
+ device pci 1c.2 on end # PCI Express Port 3
+ device pci 1c.3 on end # PCI Express Port 4
+ device pci 1c.4 on end # PCI Express Port 5
+ device pci 1c.5 on end # PCI Express Port 6
+ device pci 1c.6 off end # PCI Express Port 7
+ device pci 1c.7 off end # PCI Express Port 8
+ device pci 1d.0 on end # PCI Express Port 9
+ device pci 1d.1 off end # PCI Express Port 10
+ device pci 1d.2 off end # PCI Express Port 11
+ device pci 1d.3 off end # PCI Express Port 12
+ device pci 1e.0 on end # UART #0
+ device pci 1e.1 off end # UART #1
+ device pci 1e.2 off end # GSPI #0
+ device pci 1e.3 off end # GSPI #1
+ device pci 1e.4 on end # eMMC
+ device pci 1e.5 off end # SDIO
+ device pci 1e.6 on end # SDCard
+ device pci 1f.0 on
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+ end # LPC Interface
+ device pci 1f.1 on end # P2SB
+ device pci 1f.2 on end # Power Management Controller
+ device pci 1f.3 on end # Intel HDA
+ device pci 1f.4 on end # SMBus
+ device pci 1f.5 on end # PCH SPI
+ device pci 1f.6 off end # GbE
+ end
+end