sb/intel/bd82x6x: Factor out common ME functions
We can now factor out the essentially duplicated ME functions.
We include a .c file to preserve reproducibility. This is needed because
there are two different `mei_base_address` global variables, and we have
to access the same variables in order for builds to be reproducible.
The duplicate global in `me.c` and `me_8.x.c` will be completely gone
once this new `me_common.c` file becomes a standalone compilation unit.
We are wrapping some things in static inline functions, as they won't be
directly accessible anymore after moving to a separate compilation unit.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 remains identical.
Change-Id: I057809aa039d70c4b5fa9c24fbd26c8f52aca736
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
diff --git a/src/southbridge/intel/bd82x6x/me.c b/src/southbridge/intel/bd82x6x/me.c
index 1c56e5e..3a1ba55 100644
--- a/src/southbridge/intel/bd82x6x/me.c
+++ b/src/southbridge/intel/bd82x6x/me.c
@@ -27,304 +27,8 @@
#include <vendorcode/google/chromeos/gnvs.h>
#endif
-/* Path that the BIOS should take based on ME state */
-static const char *me_bios_path_values[] __unused = {
- [ME_NORMAL_BIOS_PATH] = "Normal",
- [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
- [ME_ERROR_BIOS_PATH] = "Error",
- [ME_RECOVERY_BIOS_PATH] = "Recovery",
- [ME_DISABLE_BIOS_PATH] = "Disable",
- [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
-};
-
-/* MMIO base address for MEI interface */
-static u32 *mei_base_address;
-
-static void mei_dump(void *ptr, int dword, int offset, const char *type)
-{
- struct mei_csr *csr;
-
- if (!CONFIG(DEBUG_INTEL_ME))
- return;
-
- printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
-
- switch (offset) {
- case MEI_H_CSR:
- case MEI_ME_CSR_HA:
- csr = ptr;
- if (!csr) {
- printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
- break;
- }
- printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
- "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
- csr->buffer_read_ptr, csr->buffer_write_ptr,
- csr->ready, csr->reset, csr->interrupt_generate,
- csr->interrupt_status, csr->interrupt_enable);
- break;
- case MEI_ME_CB_RW:
- case MEI_H_CB_WW:
- printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
- break;
- default:
- printk(BIOS_SPEW, "0x%08x\n", offset);
- break;
- }
-}
-
-/*
- * ME/MEI access helpers using memcpy to avoid aliasing.
- */
-
-static inline void mei_read_dword_ptr(void *ptr, int offset)
-{
- u32 dword = read32(mei_base_address + (offset/sizeof(u32)));
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "READ");
-}
-
-static inline void mei_write_dword_ptr(void *ptr, int offset)
-{
- u32 dword = 0;
- memcpy(&dword, ptr, sizeof(dword));
- write32(mei_base_address + (offset/sizeof(u32)), dword);
- mei_dump(ptr, dword, offset, "WRITE");
-}
-
-#ifndef __SIMPLE_DEVICE__
-static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset)
-{
- u32 dword = pci_read_config32(dev, offset);
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "PCI READ");
-}
-#endif
-
-static inline void read_host_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void write_host_csr(struct mei_csr *csr)
-{
- mei_write_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void read_me_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
-}
-
-static inline void write_cb(u32 dword)
-{
- write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword);
- mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
-}
-
-static inline u32 read_cb(void)
-{
- u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32)));
- mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
- return dword;
-}
-
-/* Wait for ME ready bit to be asserted */
-static int mei_wait_for_me_ready(void)
-{
- struct mei_csr me;
- unsigned int try = ME_RETRY;
-
- while (try--) {
- read_me_csr(&me);
- if (me.ready)
- return 0;
- udelay(ME_DELAY);
- }
-
- printk(BIOS_ERR, "ME: failed to become ready\n");
- return -1;
-}
-
-static void mei_reset(void)
-{
- struct mei_csr host;
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Reset host and ME circular buffers for next message */
- read_host_csr(&host);
- host.reset = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Re-init and indicate host is ready */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-}
-
-static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data)
-{
- struct mei_csr host;
- unsigned int ndata, n;
- u32 *data;
-
- /* Number of dwords to write, ignoring MKHI */
- ndata = mei->length >> 2;
-
- /* Pad non-dword aligned request message length */
- if (mei->length & 3)
- ndata++;
- if (!ndata) {
- printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
- return -1;
- }
- ndata++; /* Add MEI header */
-
- /*
- * Make sure there is still room left in the circular buffer.
- * Reset the buffer pointers if the requested message will not fit.
- */
- read_host_csr(&host);
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
- mei_reset();
- read_host_csr(&host);
- }
-
- /*
- * This implementation does not handle splitting large messages
- * across multiple transactions. Ensure the requested length
- * will fit in the available circular buffer depth.
- */
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
- ndata + 2, host.buffer_depth);
- return -1;
- }
-
- /* Write MEI header */
- mei_write_dword_ptr(mei, MEI_H_CB_WW);
- ndata--;
-
- /* Write MKHI header */
- mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
- ndata--;
-
- /* Write message data */
- data = req_data;
- for (n = 0; n < ndata; ++n)
- write_cb(*data++);
-
- /* Generate interrupt to the ME */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- /* Make sure ME is ready after sending request data */
- return mei_wait_for_me_ready();
-}
-
-static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes)
-{
- struct mei_header mei_rsp;
- struct mkhi_header mkhi_rsp;
- struct mei_csr me, host;
- unsigned int ndata, n;
- unsigned int expected;
- u32 *data;
-
- /* Total number of dwords to read from circular buffer */
- expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
- if (rsp_bytes & 3)
- expected++;
-
- /*
- * The interrupt status bit does not appear to indicate that the
- * message has actually been received. Instead we wait until the
- * expected number of dwords are present in the circular buffer.
- */
- for (n = ME_RETRY; n; --n) {
- read_me_csr(&me);
- if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
- break;
- udelay(ME_DELAY);
- }
- if (!n) {
- printk(BIOS_ERR, "ME: timeout waiting for data: expected "
- "%u, available %u\n", expected,
- me.buffer_write_ptr - me.buffer_read_ptr);
- return -1;
- }
-
- /* Read and verify MEI response header from the ME */
- mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
- if (!mei_rsp.is_complete) {
- printk(BIOS_ERR, "ME: response is not complete\n");
- return -1;
- }
-
- /* Handle non-dword responses and expect at least MKHI header */
- ndata = mei_rsp.length >> 2;
- if (mei_rsp.length & 3)
- ndata++;
- if (ndata != (expected - 1)) {
- printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
- ndata, (expected - 1));
- return -1;
- }
-
- /* Read and verify MKHI response header from the ME */
- mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
- if (!mkhi_rsp.is_response ||
- mkhi->group_id != mkhi_rsp.group_id ||
- mkhi->command != mkhi_rsp.command) {
- printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, "
- "command %u ?= %u, is_response %u\n", mkhi->group_id,
- mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
- mkhi_rsp.is_response);
- return -1;
- }
- ndata--; /* MKHI header has been read */
-
- /* Make sure caller passed a buffer with enough space */
- if (ndata != (rsp_bytes >> 2)) {
- printk(BIOS_ERR, "ME: not enough room in response buffer: "
- "%u != %u\n", ndata, rsp_bytes >> 2);
- return -1;
- }
-
- /* Read response data from the circular buffer */
- data = rsp_data;
- for (n = 0; n < ndata; ++n)
- *data++ = read_cb();
-
- /* Tell the ME that we have consumed the response */
- read_host_csr(&host);
- host.interrupt_status = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- return mei_wait_for_me_ready();
-}
-
-static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data, void *rsp_data, int rsp_bytes)
-{
- if (mei_send_msg(mei, mkhi, req_data) < 0)
- return -1;
- if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0)
- return -1;
- return 0;
-}
+/* FIXME: For verification purposes only */
+#include "me_common.c"
/* Send END OF POST message to the ME */
static int __unused mkhi_end_of_post(void)
@@ -438,11 +142,10 @@
struct me_hfs hfs;
u32 reg32;
- mei_base_address = (u32 *)
- (pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf);
+ update_mei_base_address();
/* S3 path will have hidden this device already */
- if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0)
+ if (!is_mei_base_address_valid())
return;
/* Make sure ME is in a mode that expects EOP */
@@ -548,94 +251,13 @@
return path;
}
-/* Prepare ME for MEI messages */
-static int intel_mei_setup(struct device *dev)
-{
- struct resource *res;
- struct mei_csr host;
-
- /* Find the MMIO base for the ME interface */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res || res->base == 0 || res->size == 0) {
- printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
- return -1;
- }
- mei_base_address = (u32 *)(uintptr_t)res->base;
-
- /* Ensure Memory and Bus Master bits are set */
- pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
- /* Clean up status for next message */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-
- return 0;
-}
-
-/* Read the Extend register hash of ME firmware */
-static int intel_me_extend_valid(struct device *dev)
-{
- struct me_heres status;
- u32 extend[8] = {0};
- int i, count = 0;
-
- pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
- if (!status.extend_feature_present) {
- printk(BIOS_ERR, "ME: Extend Feature not present\n");
- return -1;
- }
-
- if (!status.extend_reg_valid) {
- printk(BIOS_ERR, "ME: Extend Register not valid\n");
- return -1;
- }
-
- switch (status.extend_reg_algorithm) {
- case PCI_ME_EXT_SHA1:
- count = 5;
- printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
- break;
- case PCI_ME_EXT_SHA256:
- count = 8;
- printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
- break;
- default:
- printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
- status.extend_reg_algorithm);
- return -1;
- }
-
- for (i = 0; i < count; ++i) {
- extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
- printk(BIOS_DEBUG, "%08x", extend[i]);
- }
- printk(BIOS_DEBUG, "\n");
-
-#if CONFIG(CHROMEOS)
- /* Save hash in NVS for the OS to verify */
- chromeos_set_me_hash(extend, count);
-#endif
-
- return 0;
-}
-
-/* Hide the ME virtual PCI devices */
-static void intel_me_hide(struct device *dev)
-{
- dev->enabled = 0;
- pch_enable(dev);
-}
-
/* Check whether ME is present and do basic init */
static void intel_me_init(struct device *dev)
{
me_bios_path path = intel_me_path(dev);
/* Do initial setup and determine the BIOS path */
- printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
+ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_get_bios_path_string(path));
switch (path) {
case ME_S3WAKE_BIOS_PATH:
diff --git a/src/southbridge/intel/bd82x6x/me_8.x.c b/src/southbridge/intel/bd82x6x/me_8.x.c
index 88792ba..4d232ed 100644
--- a/src/southbridge/intel/bd82x6x/me_8.x.c
+++ b/src/southbridge/intel/bd82x6x/me_8.x.c
@@ -27,304 +27,8 @@
#include <vendorcode/google/chromeos/gnvs.h>
#endif
-/* Path that the BIOS should take based on ME state */
-static const char *me_bios_path_values[] __unused = {
- [ME_NORMAL_BIOS_PATH] = "Normal",
- [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
- [ME_ERROR_BIOS_PATH] = "Error",
- [ME_RECOVERY_BIOS_PATH] = "Recovery",
- [ME_DISABLE_BIOS_PATH] = "Disable",
- [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
-};
-
-/* MMIO base address for MEI interface */
-static u32 *mei_base_address;
-
-static void mei_dump(void *ptr, int dword, int offset, const char *type)
-{
- struct mei_csr *csr;
-
- if (!CONFIG(DEBUG_INTEL_ME))
- return;
-
- printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
-
- switch (offset) {
- case MEI_H_CSR:
- case MEI_ME_CSR_HA:
- csr = ptr;
- if (!csr) {
- printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
- break;
- }
- printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
- "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
- csr->buffer_read_ptr, csr->buffer_write_ptr,
- csr->ready, csr->reset, csr->interrupt_generate,
- csr->interrupt_status, csr->interrupt_enable);
- break;
- case MEI_ME_CB_RW:
- case MEI_H_CB_WW:
- printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
- break;
- default:
- printk(BIOS_SPEW, "0x%08x\n", offset);
- break;
- }
-}
-
-/*
- * ME/MEI access helpers using memcpy to avoid aliasing.
- */
-
-static inline void mei_read_dword_ptr(void *ptr, int offset)
-{
- u32 dword = read32(mei_base_address + (offset/sizeof(u32)));
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "READ");
-}
-
-static inline void mei_write_dword_ptr(void *ptr, int offset)
-{
- u32 dword = 0;
- memcpy(&dword, ptr, sizeof(dword));
- write32(mei_base_address + (offset/sizeof(u32)), dword);
- mei_dump(ptr, dword, offset, "WRITE");
-}
-
-#ifndef __SIMPLE_DEVICE__
-static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset)
-{
- u32 dword = pci_read_config32(dev, offset);
- memcpy(ptr, &dword, sizeof(dword));
- mei_dump(ptr, dword, offset, "PCI READ");
-}
-#endif
-
-static inline void read_host_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void write_host_csr(struct mei_csr *csr)
-{
- mei_write_dword_ptr(csr, MEI_H_CSR);
-}
-
-static inline void read_me_csr(struct mei_csr *csr)
-{
- mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
-}
-
-static inline void write_cb(u32 dword)
-{
- write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword);
- mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
-}
-
-static inline u32 read_cb(void)
-{
- u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32)));
- mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
- return dword;
-}
-
-/* Wait for ME ready bit to be asserted */
-static int mei_wait_for_me_ready(void)
-{
- struct mei_csr me;
- unsigned int try = ME_RETRY;
-
- while (try--) {
- read_me_csr(&me);
- if (me.ready)
- return 0;
- udelay(ME_DELAY);
- }
-
- printk(BIOS_ERR, "ME: failed to become ready\n");
- return -1;
-}
-
-static void mei_reset(void)
-{
- struct mei_csr host;
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Reset host and ME circular buffers for next message */
- read_host_csr(&host);
- host.reset = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- if (mei_wait_for_me_ready() < 0)
- return;
-
- /* Re-init and indicate host is ready */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-}
-
-static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data)
-{
- struct mei_csr host;
- unsigned int ndata, n;
- u32 *data;
-
- /* Number of dwords to write, ignoring MKHI */
- ndata = mei->length >> 2;
-
- /* Pad non-dword aligned request message length */
- if (mei->length & 3)
- ndata++;
- if (!ndata) {
- printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
- return -1;
- }
- ndata++; /* Add MEI header */
-
- /*
- * Make sure there is still room left in the circular buffer.
- * Reset the buffer pointers if the requested message will not fit.
- */
- read_host_csr(&host);
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
- mei_reset();
- read_host_csr(&host);
- }
-
- /*
- * This implementation does not handle splitting large messages
- * across multiple transactions. Ensure the requested length
- * will fit in the available circular buffer depth.
- */
- if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
- printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
- ndata + 2, host.buffer_depth);
- return -1;
- }
-
- /* Write MEI header */
- mei_write_dword_ptr(mei, MEI_H_CB_WW);
- ndata--;
-
- /* Write MKHI header */
- mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
- ndata--;
-
- /* Write message data */
- data = req_data;
- for (n = 0; n < ndata; ++n)
- write_cb(*data++);
-
- /* Generate interrupt to the ME */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- /* Make sure ME is ready after sending request data */
- return mei_wait_for_me_ready();
-}
-
-static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes)
-{
- struct mei_header mei_rsp;
- struct mkhi_header mkhi_rsp;
- struct mei_csr me, host;
- unsigned int ndata, n;
- unsigned int expected;
- u32 *data;
-
- /* Total number of dwords to read from circular buffer */
- expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
- if (rsp_bytes & 3)
- expected++;
-
- /*
- * The interrupt status bit does not appear to indicate that the
- * message has actually been received. Instead we wait until the
- * expected number of dwords are present in the circular buffer.
- */
- for (n = ME_RETRY; n; --n) {
- read_me_csr(&me);
- if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
- break;
- udelay(ME_DELAY);
- }
- if (!n) {
- printk(BIOS_ERR, "ME: timeout waiting for data: expected "
- "%u, available %u\n", expected,
- me.buffer_write_ptr - me.buffer_read_ptr);
- return -1;
- }
-
- /* Read and verify MEI response header from the ME */
- mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
- if (!mei_rsp.is_complete) {
- printk(BIOS_ERR, "ME: response is not complete\n");
- return -1;
- }
-
- /* Handle non-dword responses and expect at least MKHI header */
- ndata = mei_rsp.length >> 2;
- if (mei_rsp.length & 3)
- ndata++;
- if (ndata != (expected - 1)) {
- printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
- ndata, (expected - 1));
- return -1;
- }
-
- /* Read and verify MKHI response header from the ME */
- mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
- if (!mkhi_rsp.is_response ||
- mkhi->group_id != mkhi_rsp.group_id ||
- mkhi->command != mkhi_rsp.command) {
- printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, "
- "command %u ?= %u, is_response %u\n", mkhi->group_id,
- mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
- mkhi_rsp.is_response);
- return -1;
- }
- ndata--; /* MKHI header has been read */
-
- /* Make sure caller passed a buffer with enough space */
- if (ndata != (rsp_bytes >> 2)) {
- printk(BIOS_ERR, "ME: not enough room in response buffer: "
- "%u != %u\n", ndata, rsp_bytes >> 2);
- return -1;
- }
-
- /* Read response data from the circular buffer */
- data = rsp_data;
- for (n = 0; n < ndata; ++n)
- *data++ = read_cb();
-
- /* Tell the ME that we have consumed the response */
- read_host_csr(&host);
- host.interrupt_status = 1;
- host.interrupt_generate = 1;
- write_host_csr(&host);
-
- return mei_wait_for_me_ready();
-}
-
-static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
- void *req_data, void *rsp_data, int rsp_bytes)
-{
- if (mei_send_msg(mei, mkhi, req_data) < 0)
- return -1;
- if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0)
- return -1;
- return 0;
-}
+/* FIXME: For verification purposes only */
+#include "me_common.c"
/* Send END OF POST message to the ME */
static int __unused mkhi_end_of_post(void)
@@ -431,11 +135,10 @@
struct me_hfs hfs;
u32 reg32;
- mei_base_address = (void *)
- (pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf);
+ update_mei_base_address();
/* S3 path will have hidden this device already */
- if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0)
+ if (!is_mei_base_address_valid())
return;
/* Make sure ME is in a mode that expects EOP */
@@ -533,91 +236,6 @@
return path;
}
-/* Prepare ME for MEI messages */
-static int intel_mei_setup(struct device *dev)
-{
- struct resource *res;
- struct mei_csr host;
-
- /* Find the MMIO base for the ME interface */
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (!res || res->base == 0 || res->size == 0) {
- printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
- return -1;
- }
- mei_base_address = (u32 *)(uintptr_t)res->base;
-
- /* Ensure Memory and Bus Master bits are set */
- pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
- /* Clean up status for next message */
- read_host_csr(&host);
- host.interrupt_generate = 1;
- host.ready = 1;
- host.reset = 0;
- write_host_csr(&host);
-
- return 0;
-}
-
-#if CONFIG(CHROMEOS)
-#include <vendorcode/google/chromeos/chromeos.h>
-#endif
-
-/* Read the Extend register hash of ME firmware */
-static int intel_me_extend_valid(struct device *dev)
-{
- struct me_heres status;
- u32 extend[8] = {0};
- int i, count = 0;
-
- pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
- if (!status.extend_feature_present) {
- printk(BIOS_ERR, "ME: Extend Feature not present\n");
- return -1;
- }
-
- if (!status.extend_reg_valid) {
- printk(BIOS_ERR, "ME: Extend Register not valid\n");
- return -1;
- }
-
- switch (status.extend_reg_algorithm) {
- case PCI_ME_EXT_SHA1:
- count = 5;
- printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
- break;
- case PCI_ME_EXT_SHA256:
- count = 8;
- printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
- break;
- default:
- printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
- status.extend_reg_algorithm);
- return -1;
- }
-
- for (i = 0; i < count; ++i) {
- extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
- printk(BIOS_DEBUG, "%08x", extend[i]);
- }
- printk(BIOS_DEBUG, "\n");
-
-#if CONFIG(CHROMEOS)
- /* Save hash in NVS for the OS to verify */
- chromeos_set_me_hash(extend, count);
-#endif
-
- return 0;
-}
-
-/* Hide the ME virtual PCI devices */
-static void intel_me_hide(struct device *dev)
-{
- dev->enabled = 0;
- pch_enable(dev);
-}
-
static int intel_me_read_mbp(me_bios_payload *mbp_data);
/* Check whether ME is present and do basic init */
@@ -627,7 +245,7 @@
me_bios_payload mbp_data;
/* Do initial setup and determine the BIOS path */
- printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]);
+ printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_get_bios_path_string(path));
switch (path) {
case ME_S3WAKE_BIOS_PATH:
diff --git a/src/southbridge/intel/bd82x6x/me_common.c b/src/southbridge/intel/bd82x6x/me_common.c
new file mode 100644
index 0000000..8e38171
--- /dev/null
+++ b/src/southbridge/intel/bd82x6x/me_common.c
@@ -0,0 +1,419 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <acpi/acpi.h>
+#include <device/mmio.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include <string.h>
+#include <delay.h>
+#include <halt.h>
+
+#include "me.h"
+#include "pch.h"
+
+/* Path that the BIOS should take based on ME state */
+static const char *me_bios_path_values[] __unused = {
+ [ME_NORMAL_BIOS_PATH] = "Normal",
+ [ME_S3WAKE_BIOS_PATH] = "S3 Wake",
+ [ME_ERROR_BIOS_PATH] = "Error",
+ [ME_RECOVERY_BIOS_PATH] = "Recovery",
+ [ME_DISABLE_BIOS_PATH] = "Disable",
+ [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update",
+};
+
+static inline const char *const me_get_bios_path_string(int path)
+{
+ return me_bios_path_values[path];
+}
+
+/* MMIO base address for MEI interface */
+static u32 *mei_base_address;
+
+static void mei_dump(void *ptr, int dword, int offset, const char *type)
+{
+ struct mei_csr *csr;
+
+ if (!CONFIG(DEBUG_INTEL_ME))
+ return;
+
+ printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset);
+
+ switch (offset) {
+ case MEI_H_CSR:
+ case MEI_ME_CSR_HA:
+ csr = ptr;
+ if (!csr) {
+ printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword);
+ break;
+ }
+ printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u "
+ "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth,
+ csr->buffer_read_ptr, csr->buffer_write_ptr,
+ csr->ready, csr->reset, csr->interrupt_generate,
+ csr->interrupt_status, csr->interrupt_enable);
+ break;
+ case MEI_ME_CB_RW:
+ case MEI_H_CB_WW:
+ printk(BIOS_SPEW, "CB: 0x%08x\n", dword);
+ break;
+ default:
+ printk(BIOS_SPEW, "0x%08x\n", offset);
+ break;
+ }
+}
+
+/*
+ * ME/MEI access helpers using memcpy to avoid aliasing.
+ */
+
+static inline void mei_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = read32(mei_base_address + (offset / sizeof(u32)));
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "READ");
+}
+
+static inline void mei_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ write32(mei_base_address + (offset / sizeof(u32)), dword);
+ mei_dump(ptr, dword, offset, "WRITE");
+}
+
+#ifndef __SIMPLE_DEVICE__
+static inline void pci_read_dword_ptr(struct device *dev, void *ptr, int offset)
+{
+ u32 dword = pci_read_config32(dev, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+ mei_dump(ptr, dword, offset, "PCI READ");
+}
+#endif
+
+static inline void read_host_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void write_host_csr(struct mei_csr *csr)
+{
+ mei_write_dword_ptr(csr, MEI_H_CSR);
+}
+
+static inline void read_me_csr(struct mei_csr *csr)
+{
+ mei_read_dword_ptr(csr, MEI_ME_CSR_HA);
+}
+
+static inline void write_cb(u32 dword)
+{
+ write32(mei_base_address + (MEI_H_CB_WW / sizeof(u32)), dword);
+ mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE");
+}
+
+static inline u32 read_cb(void)
+{
+ u32 dword = read32(mei_base_address + (MEI_ME_CB_RW / sizeof(u32)));
+ mei_dump(NULL, dword, MEI_ME_CB_RW, "READ");
+ return dword;
+}
+
+/* Wait for ME ready bit to be asserted */
+static int mei_wait_for_me_ready(void)
+{
+ struct mei_csr me;
+ unsigned int try = ME_RETRY;
+
+ while (try--) {
+ read_me_csr(&me);
+ if (me.ready)
+ return 0;
+ udelay(ME_DELAY);
+ }
+
+ printk(BIOS_ERR, "ME: failed to become ready\n");
+ return -1;
+}
+
+static void mei_reset(void)
+{
+ struct mei_csr host;
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Reset host and ME circular buffers for next message */
+ read_host_csr(&host);
+ host.reset = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ if (mei_wait_for_me_ready() < 0)
+ return;
+
+ /* Re-init and indicate host is ready */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+}
+
+static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, void *req_data)
+{
+ struct mei_csr host;
+ unsigned int ndata, n;
+ u32 *data;
+
+ /* Number of dwords to write, ignoring MKHI */
+ ndata = mei->length >> 2;
+
+ /* Pad non-dword aligned request message length */
+ if (mei->length & 3)
+ ndata++;
+ if (!ndata) {
+ printk(BIOS_DEBUG, "ME: request does not include MKHI\n");
+ return -1;
+ }
+ ndata++; /* Add MEI header */
+
+ /*
+ * Make sure there is still room left in the circular buffer.
+ * Reset the buffer pointers if the requested message will not fit.
+ */
+ read_host_csr(&host);
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: circular buffer full, resetting...\n");
+ mei_reset();
+ read_host_csr(&host);
+ }
+
+ /*
+ * This implementation does not handle splitting large messages
+ * across multiple transactions. Ensure the requested length
+ * will fit in the available circular buffer depth.
+ */
+ if ((host.buffer_depth - host.buffer_write_ptr) < ndata) {
+ printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n",
+ ndata + 2, host.buffer_depth);
+ return -1;
+ }
+
+ /* Write MEI header */
+ mei_write_dword_ptr(mei, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write MKHI header */
+ mei_write_dword_ptr(mkhi, MEI_H_CB_WW);
+ ndata--;
+
+ /* Write message data */
+ data = req_data;
+ for (n = 0; n < ndata; ++n)
+ write_cb(*data++);
+
+ /* Generate interrupt to the ME */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ /* Make sure ME is ready after sending request data */
+ return mei_wait_for_me_ready();
+}
+
+static int mei_recv_msg(struct mkhi_header *mkhi, void *rsp_data, int rsp_bytes)
+{
+ struct mei_header mei_rsp;
+ struct mkhi_header mkhi_rsp;
+ struct mei_csr me, host;
+ unsigned int ndata, n;
+ unsigned int expected;
+ u32 *data;
+
+ /* Total number of dwords to read from circular buffer */
+ expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2;
+ if (rsp_bytes & 3)
+ expected++;
+
+ /*
+ * The interrupt status bit does not appear to indicate that the
+ * message has actually been received. Instead we wait until the
+ * expected number of dwords are present in the circular buffer.
+ */
+ for (n = ME_RETRY; n; --n) {
+ read_me_csr(&me);
+ if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!n) {
+ printk(BIOS_ERR, "ME: timeout waiting for data: expected %u, available %u\n",
+ expected, me.buffer_write_ptr - me.buffer_read_ptr);
+ return -1;
+ }
+
+ /* Read and verify MEI response header from the ME */
+ mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW);
+ if (!mei_rsp.is_complete) {
+ printk(BIOS_ERR, "ME: response is not complete\n");
+ return -1;
+ }
+
+ /* Handle non-dword responses and expect at least MKHI header */
+ ndata = mei_rsp.length >> 2;
+ if (mei_rsp.length & 3)
+ ndata++;
+ if (ndata != (expected - 1)) {
+ printk(BIOS_ERR, "ME: response is missing data %d != %d\n",
+ ndata, (expected - 1));
+ return -1;
+ }
+
+ /* Read and verify MKHI response header from the ME */
+ mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW);
+ if (!mkhi_rsp.is_response ||
+ mkhi->group_id != mkhi_rsp.group_id ||
+ mkhi->command != mkhi_rsp.command) {
+ printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, "
+ "command %u ?= %u, is_response %u\n", mkhi->group_id,
+ mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command,
+ mkhi_rsp.is_response);
+ return -1;
+ }
+ ndata--; /* MKHI header has been read */
+
+ /* Make sure caller passed a buffer with enough space */
+ if (ndata != (rsp_bytes >> 2)) {
+ printk(BIOS_ERR, "ME: not enough room in response buffer: %u != %u\n",
+ ndata, rsp_bytes >> 2);
+ return -1;
+ }
+
+ /* Read response data from the circular buffer */
+ data = rsp_data;
+ for (n = 0; n < ndata; ++n)
+ *data++ = read_cb();
+
+ /* Tell the ME that we have consumed the response */
+ read_host_csr(&host);
+ host.interrupt_status = 1;
+ host.interrupt_generate = 1;
+ write_host_csr(&host);
+
+ return mei_wait_for_me_ready();
+}
+
+static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
+ void *req_data, void *rsp_data, int rsp_bytes)
+{
+ if (mei_send_msg(mei, mkhi, req_data) < 0)
+ return -1;
+ if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0)
+ return -1;
+ return 0;
+}
+
+#ifdef __SIMPLE_DEVICE__
+
+static inline void update_mei_base_address(void)
+{
+ mei_base_address = (u32 *)(pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf);
+}
+
+static inline bool is_mei_base_address_valid(void)
+{
+ return mei_base_address && mei_base_address != (u32 *)0xfffffff0;
+}
+
+#else
+
+/* Prepare ME for MEI messages */
+static int intel_mei_setup(struct device *dev)
+{
+ struct resource *res;
+ struct mei_csr host;
+
+ /* Find the MMIO base for the ME interface */
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ if (!res || res->base == 0 || res->size == 0) {
+ printk(BIOS_DEBUG, "ME: MEI resource not present!\n");
+ return -1;
+ }
+ mei_base_address = (u32 *)(uintptr_t)res->base;
+
+ /* Ensure Memory and Bus Master bits are set */
+ pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ /* Clean up status for next message */
+ read_host_csr(&host);
+ host.interrupt_generate = 1;
+ host.ready = 1;
+ host.reset = 0;
+ write_host_csr(&host);
+
+ return 0;
+}
+
+#if CONFIG(CHROMEOS)
+#include <vendorcode/google/chromeos/chromeos.h>
+#endif
+
+/* Read the Extend register hash of ME firmware */
+static int intel_me_extend_valid(struct device *dev)
+{
+ struct me_heres status;
+ u32 extend[8] = {0};
+ int i, count = 0;
+
+ pci_read_dword_ptr(dev, &status, PCI_ME_HERES);
+ if (!status.extend_feature_present) {
+ printk(BIOS_ERR, "ME: Extend Feature not present\n");
+ return -1;
+ }
+
+ if (!status.extend_reg_valid) {
+ printk(BIOS_ERR, "ME: Extend Register not valid\n");
+ return -1;
+ }
+
+ switch (status.extend_reg_algorithm) {
+ case PCI_ME_EXT_SHA1:
+ count = 5;
+ printk(BIOS_DEBUG, "ME: Extend SHA-1: ");
+ break;
+ case PCI_ME_EXT_SHA256:
+ count = 8;
+ printk(BIOS_DEBUG, "ME: Extend SHA-256: ");
+ break;
+ default:
+ printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n",
+ status.extend_reg_algorithm);
+ return -1;
+ }
+
+ for (i = 0; i < count; ++i) {
+ extend[i] = pci_read_config32(dev, PCI_ME_HER(i));
+ printk(BIOS_DEBUG, "%08x", extend[i]);
+ }
+ printk(BIOS_DEBUG, "\n");
+
+#if CONFIG(CHROMEOS)
+ /* Save hash in NVS for the OS to verify */
+ chromeos_set_me_hash(extend, count);
+#endif
+
+ return 0;
+}
+
+/* Hide the ME virtual PCI devices */
+static void intel_me_hide(struct device *dev)
+{
+ dev->enabled = 0;
+ pch_enable(dev);
+}
+
+#endif