lynxpoint: Enable USB clock gating, late setup, and sleep prep
Both EHCI and XHCI controllers have additional setup steps
that are not part of the PEI reference code so they need to
be done later.
Both controllers also have specific clock gating setup
requirements that are now implemented.
Additionally they both have specific requirements when entering
sleep states. XHCI needs something in S3/S4/S5 and EHCI only
has steps for S4/S5 entry.
Change-Id: Ic62cbc8b6255455e56b72dd5d52e27a311999330
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/57033
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4217
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
index 370e017..4d96edf 100644
--- a/src/southbridge/intel/lynxpoint/Makefile.inc
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -30,6 +30,7 @@
ramstage-y += pcie.c
ramstage-y += sata.c
ramstage-y += usb_ehci.c
+ramstage-y += usb_xhci.c
ramstage-y += me_9.x.c
ramstage-y += smbus.c
ramstage-$(CONFIG_INTEL_LYNXPOINT_LP) += serialio.c
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index b01fdc0..6ee81d1 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -224,6 +224,7 @@
#define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0)
#define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0)
+#define PCH_XHCI_DEV PCI_DEV(0, 0x14, 0)
#define PCH_ME_DEV PCI_DEV(0, 0x16, 0)
#define PCH_PCIE_DEV_SLOT 28
@@ -335,6 +336,12 @@
#define SATA_IOBP_SP0G3IR 0xea000151
#define SATA_IOBP_SP1G3IR 0xea000051
+/* USB Registers */
+#define EHCI_PWR_CNTL_STS 0x54
+#define EHCI_PWR_STS_MASK 0x3
+#define EHCI_PWR_STS_SET_D0 0x0
+#define EHCI_PWR_STS_SET_D3 0x3
+
/* Serial IO IOBP Registers */
#define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */
#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5)
diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c
index 203a1bb..add53ed 100644
--- a/src/southbridge/intel/lynxpoint/smihandler.c
+++ b/src/southbridge/intel/lynxpoint/smihandler.c
@@ -20,6 +20,7 @@
* MA 02110-1301 USA
*/
+#include <delay.h>
#include <types.h>
#include <arch/hlt.h>
#include <arch/io.h>
@@ -105,6 +106,98 @@
}
}
+/* Handler for EHCI controller on entry to S3/S4/S5 */
+static void ehci_sleep_prepare(device_t dev, u8 slp_typ)
+{
+ u32 reg32;
+ u32 bar0_base;
+ u16 pwr_state;
+ u16 pci_cmd;
+
+ /* Check if the controller is disabled or not present */
+ bar0_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
+ if (bar0_base == 0 || bar0_base == 0xffffffff)
+ return;
+ pci_cmd = pci_read_config32(dev, PCI_COMMAND);
+
+ switch (slp_typ) {
+ case SLP_TYP_S4:
+ case SLP_TYP_S5:
+ /* Check if controller is in D3 power state */
+ pwr_state = pci_read_config16(dev, EHCI_PWR_CNTL_STS);
+ if ((pwr_state & EHCI_PWR_STS_MASK) == EHCI_PWR_STS_SET_D3) {
+ /* Put in D0 */
+ pwr_state &= ~EHCI_PWR_STS_MASK;
+ pwr_state |= EHCI_PWR_STS_SET_D0;
+ pci_write_config16(dev, EHCI_PWR_CNTL_STS, pwr_state);
+
+ /* Make sure memory bar is set */
+ pci_write_config32(dev, PCI_BASE_ADDRESS_0, bar0_base);
+
+ /* Make sure memory space is enabled */
+ pci_write_config16(dev, PCI_COMMAND, pci_cmd |
+ PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ }
+
+ /*
+ * If Run/Stop (bit0) is clear in USB2.0_CMD:
+ * - Clear Async Schedule Enable (bit5) and
+ * - Clear Periodic Schedule Enable (bit4) and
+ * - Set Run/Stop (bit0)
+ */
+ reg32 = read32(bar0_base + 0x20);
+ if (reg32 & (1 << 0)) {
+ reg32 &= ~((1 << 5) | (1 << 4));
+ reg32 |= (1 << 0);
+ write32(bar0_base + 0x20, reg32);
+ }
+
+ /* Check for Port Enabled in PORTSC */
+ reg32 = read32(bar0_base + 0x64);
+ if (reg32 & (1 << 2)) {
+ /* Set suspend bit in PORTSC if not already set */
+ if (!(reg32 & (1 << 7))) {
+ reg32 |= (1 << 7);
+ write32(bar0_base + 0x64, reg32);
+ }
+
+ /* Delay 25ms !! */
+ udelay(25 * 1000);
+
+ /* Clear Run/Stop bit */
+ reg32 = read32(bar0_base + 0x20);
+ reg32 &= (1 << 0);
+ write32(bar0_base + 0x20, reg32);
+ }
+
+ pwr_state = pci_read_config16(dev, EHCI_PWR_CNTL_STS);
+ if ((pwr_state & EHCI_PWR_STS_MASK) == EHCI_PWR_STS_SET_D3) {
+ /* Restore pci command reg */
+ pci_write_config16(dev, PCI_COMMAND, pci_cmd);
+
+ /* Enable D3 */
+ pwr_state |= EHCI_PWR_STS_SET_D3;
+ pci_write_config16(dev, EHCI_PWR_CNTL_STS, pwr_state);
+ }
+ }
+}
+
+/* Handler for XHCI controller on entry to S3/S4/S5 */
+static void xhci_sleep_prepare(device_t dev, u8 slp_typ)
+{
+ u16 reg16;
+
+ switch (slp_typ) {
+ case SLP_TYP_S3:
+ case SLP_TYP_S4:
+ case SLP_TYP_S5:
+ /* Set D3Hot state and PME enable bit */
+ reg16 = pci_read_config16(dev, 0x74);
+ reg16 |= (1 << 8) | (1 << 1) | (1 << 0);
+ pci_write_config16(dev, 0x74, reg16);
+ }
+}
+
static void southbridge_smi_sleep(void)
{
u8 reg8;
@@ -132,6 +225,11 @@
/* Do any mainboard sleep handling */
mainboard_smi_sleep(slp_typ-2);
+ /* USB sleep preparations */
+ ehci_sleep_prepare(PCH_EHCI1_DEV, slp_typ);
+ ehci_sleep_prepare(PCH_EHCI2_DEV, slp_typ);
+ xhci_sleep_prepare(PCH_XHCI_DEV, slp_typ);
+
#if CONFIG_ELOG_GSMI
/* Log S3, S4, and S5 entry */
if (slp_typ >= 5)
diff --git a/src/southbridge/intel/lynxpoint/usb_ehci.c b/src/southbridge/intel/lynxpoint/usb_ehci.c
index fd7c659..f06151b 100644
--- a/src/southbridge/intel/lynxpoint/usb_ehci.c
+++ b/src/southbridge/intel/lynxpoint/usb_ehci.c
@@ -26,20 +26,33 @@
#include <usbdebug.h>
#include <arch/io.h>
-static void usb_ehci_init(struct device *dev)
+static void usb_ehci_clock_gating(struct device *dev)
{
u32 reg32;
- /* Disable Wake on Disconnect in RMH */
- reg32 = RCBA32(0x35b0);
- reg32 |= 0x22;
- RCBA32(0x35b0) = reg32;
+ /* IOBP 0xE5004001[7:6] = 11b */
+ pch_iobp_update(0xe5004001, ~0, (1 << 7)|(1 << 6));
+ /* Dx:F0:DCh[5,2,1] = 111b
+ * Dx:F0:DCh[0] = 1b when EHCI controller is disabled */
+ reg32 = pci_read_config32(dev, 0xdc);
+ reg32 |= (1 << 5) | (1 << 2) | (1 << 1);
+ pci_write_config32(dev, 0xdc, reg32);
+
+ /* Dx:F0:78h[1:0] = 11b */
+ reg32 = pci_read_config32(dev, 0x78);
+ reg32 |= (1 << 1) | (1 << 0);
+ pci_write_config32(dev, 0x78, reg32);
+}
+
+static void usb_ehci_init(struct device *dev)
+{
printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 |= PCI_COMMAND_MASTER;
- //reg32 |= PCI_COMMAND_SERR;
- pci_write_config32(dev, PCI_COMMAND, reg32);
+
+ usb_ehci_clock_gating(dev);
+
+ /* Disable Wake on Disconnect in RMH */
+ RCBA32_OR(0x35b0, 0x00000022);
printk(BIOS_DEBUG, "done.\n");
}
diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c
new file mode 100644
index 0000000..33f33f4
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/usb_xhci.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include "pch.h"
+
+static void usb_xhci_clock_gating(device_t dev)
+{
+ u32 reg32;
+
+ /* IOBP 0xE5004001[7:6] = 11b */
+ pch_iobp_update(0xe5004001, ~0, (1 << 7)|(1 << 6));
+
+ reg32 = pci_read_config32(dev, 0x40);
+ reg32 &= ~(1 << 23); /* unsupported request */
+
+ if (pch_is_lp()) {
+ /* D20:F0:40h[18,17,8] = 111b */
+ reg32 |= (1 << 18) | (1 << 17) | (1 << 8);
+ /* D20:F0:40h[21,20,19] = 110b to enable XHCI Idle L1 */
+ reg32 &= ~(1 << 19);
+ reg32 |= (1 << 21) | (1 << 20);
+ } else {
+ /* D20:F0:40h[21,20,18,17,8] = 11111b */
+ reg32 |= (1 << 21)|(1 << 20)|(1 << 18)|(1 << 17)|(1 << 8);
+ }
+
+ /* Avoid writing upper byte as it is write-once */
+ pci_write_config16(dev, 0x40, (u16)(reg32 & 0xffff));
+ pci_write_config8(dev, 0x40 + 2, (u8)((reg32 >> 16) & 0xff));
+
+ /* D20:F0:44h[9,7,3] = 111b */
+ reg32 = pci_read_config32(dev, 0x44);
+ reg32 |= (1 << 9) | (1 << 7) | (1 << 3);
+ pci_write_config32(dev, 0x44, reg32);
+
+ reg32 = pci_read_config32(dev, 0xa0);
+ if (pch_is_lp()) {
+ /* D20:F0:A0h[18] = 1 */
+ reg32 |= (1 << 18);
+ } else {
+ /* D20:F0:A0h[6] = 1 */
+ reg32 |= (1 << 6);
+ }
+ pci_write_config32(dev, 0xa0, reg32);
+
+ /* D20:F0:A4h[13] = 0 */
+ reg32 = pci_read_config32(dev, 0xa4);
+ reg32 &= ~(1 << 13);
+ pci_write_config32(dev, 0xa4, reg32);
+}
+
+static void usb_xhci_init(device_t dev)
+{
+ struct resource *bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
+ u32 reg32;
+
+ if (!bar0 || bar0->base == 0 || bar0->base == 0xffffffff)
+ return;
+
+ /* Enable clock gating first */
+ usb_xhci_clock_gating(dev);
+
+ /* D20:F0:74h[1:0] = 11b (set D3Hot state) */
+ reg32 = pci_read_config16(dev, 0x74);
+ reg32 |= (1 << 1) | (1 << 0);
+ pci_write_config16(dev, 0x74, reg32);
+
+ reg32 = read32(bar0->base + 0x8144);
+ if (pch_is_lp()) {
+ /* XHCIBAR + 8144h[8,7,6] = 111b */
+ reg32 |= (1 << 8) | (1 << 7) | (1 << 6);
+ } else {
+ /* XHCIBAR + 8144h[8,7,6] = 100b */
+ reg32 &= ~((1 << 7) | (1 << 6));
+ reg32 |= (1 << 8);
+ }
+ write32(bar0->base + 0x8144, reg32);
+
+ if (pch_is_lp()) {
+ /* XHCIBAR + 816Ch[19:0] = 000f0038h */
+ reg32 = read32(bar0->base + 0x816c);
+ reg32 &= ~0x000fffff;
+ reg32 |= 0x000f0038;
+ write32(bar0->base + 0x816c, reg32);
+
+ /* D20:F0:B0h[17,14,13] = 100b */
+ reg32 = pci_read_config32(dev, 0xb0);
+ reg32 &= ~((1 << 14) | (1 << 13));
+ reg32 |= (1 << 17);
+ pci_write_config32(dev, 0xb0, reg32);
+
+ /* XHCIBAR + 818Ch[7:0] = FFh */
+ reg32 = read32(bar0->base + 0x818c);
+ reg32 |= 0xff;
+ write32(bar0->base + 0x818c, reg32);
+ }
+
+ reg32 = pci_read_config32(dev, 0x50);
+ if (pch_is_lp()) {
+ /* D20:F0:50h[28:0] = 0FCE2E5Fh */
+ reg32 &= ~0x1fffffff;
+ reg32 |= 0x0fce2e5f;
+ } else {
+ /* D20:F0:50h[26:0] = 07886E9Fh */
+ reg32 &= ~0x07ffffff;
+ reg32 |= 0x07886e9f;
+ }
+ pci_write_config32(dev, 0x50, reg32);
+
+ /* D20:F0:44h[31] = 1 (Access Control Bit) */
+ reg32 = pci_read_config32(dev, 0x40);
+ reg32 |= (1 << 31);
+ pci_write_config32(dev, 0x40, reg32);
+
+ /* D20:F0:40h[31,23] = 10b (OC Configuration Done) */
+ reg32 = pci_read_config32(dev, 0x40);
+ reg32 &= ~(1 << 23); /* unsupported request */
+ reg32 |= (1 << 31);
+ pci_write_config32(dev, 0x40, reg32);
+}
+
+static void usb_xhci_set_subsystem(device_t dev, unsigned vendor,
+ unsigned device)
+{
+ if (!vendor || !device) {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ pci_read_config32(dev, PCI_VENDOR_ID));
+ } else {
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+ }
+}
+
+static struct pci_operations lops_pci = {
+ .set_subsystem = &usb_xhci_set_subsystem,
+};
+
+static struct device_operations usb_xhci_ops = {
+ .read_resources = pci_dev_read_resources,
+ .set_resources = pci_dev_set_resources,
+ .enable_resources = pci_dev_enable_resources,
+ .init = usb_xhci_init,
+ .ops_pci = &lops_pci,
+};
+
+static const unsigned short pci_device_ids[] = { 0x8c31, /* LynxPoint-H */
+ 0x9c31, /* LynxPoint-LP */
+ 0 };
+
+static const struct pci_driver pch_usb_xhci __pci_driver = {
+ .ops = &usb_xhci_ops,
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .devices = pci_device_ids,
+};