soc/intel/common/block/cse: Move me_read_config32() to common code
me_read_config32() is defined in multiple places, move it to common
location. Also, this function is usually used for reading HFSTS
registers, hence move the HFSTS register definitions to common location.
Also add a funtion to check if the CSE device has been enabled in the
devicetree and it is visible on the bus. This API can be used by
the caller to check before initiating any HECI communication.
TEST=Verified reading HFSTS registers on CML RVP & Hatch board
Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/soc/intel/apollolake/cse.c b/src/soc/intel/apollolake/cse.c
index 82226ec..260c6c6 100644
--- a/src/soc/intel/apollolake/cse.c
+++ b/src/soc/intel/apollolake/cse.c
@@ -28,12 +28,6 @@
#include <device/pci_ops.h>
#include <stdint.h>
-#define PCI_ME_HFSTS1 0x40
-#define PCI_ME_HFSTS2 0x48
-#define PCI_ME_HFSTS3 0x60
-#define PCI_ME_HFSTS4 0x64
-#define PCI_ME_HFSTS5 0x68
-#define PCI_ME_HFSTS6 0x6c
#define MKHI_GROUP_ID_MCA 0x0a
#define READ_FILE 0x02
@@ -188,7 +182,9 @@
static uint32_t dump_status(int index, int reg_addr)
{
- uint32_t reg = pci_read_config32(PCH_DEV_CSE, reg_addr);
+ uint32_t reg;
+
+ reg = me_read_config32(reg_addr);
printk(BIOS_DEBUG, "CSE FWSTS%d: 0x%08x\n", index, reg);
@@ -256,6 +252,9 @@
{
uint32_t fwsts1;
+ if (!is_cse_enabled())
+ return;
+
fwsts1 = dump_status(1, PCI_ME_HFSTS1);
dump_status(2, PCI_ME_HFSTS2);
dump_status(3, PCI_ME_HFSTS3);
diff --git a/src/soc/intel/cannonlake/me.c b/src/soc/intel/cannonlake/me.c
index b8b4245..cd94be5 100644
--- a/src/soc/intel/cannonlake/me.c
+++ b/src/soc/intel/cannonlake/me.c
@@ -32,16 +32,6 @@
ME_WSTATE_NORMAL = 0x05,
};
-/* HFSTS register offsets in PCI config space */
-enum {
- PCI_ME_HFSTS1 = 0x40,
- PCI_ME_HFSTS2 = 0x48,
- PCI_ME_HFSTS3 = 0x60,
- PCI_ME_HFSTS4 = 0x64,
- PCI_ME_HFSTS5 = 0x68,
- PCI_ME_HFSTS6 = 0x6C,
-};
-
/* Host Firmware Status Register 1 */
union hfsts1 {
uint32_t raw;
@@ -155,11 +145,6 @@
} __packed fields;
};
-static uint32_t me_read_config32(int offset)
-{
- return pci_read_config32(PCH_DEV_CSE, offset);
-}
-
/*
* From reading the documentation, this should work for both WHL and CML
* platforms. Also, calling this function from dump_me_status() does not
@@ -201,6 +186,9 @@
if (!CONFIG(CONSOLE_SERIAL))
return;
+ if (!is_cse_enabled())
+ return;
+
hfsts1.raw = me_read_config32(PCI_ME_HFSTS1);
/*
@@ -244,6 +232,9 @@
union hfsts5 hfsts5;
union hfsts6 hfsts6;
+ if (!is_cse_enabled())
+ return;
+
hfsts1.raw = me_read_config32(PCI_ME_HFSTS1);
hfsts2.raw = me_read_config32(PCI_ME_HFSTS2);
hfsts3.raw = me_read_config32(PCI_ME_HFSTS3);
diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c
index 9520242..1671970 100644
--- a/src/soc/intel/common/block/cse/cse.c
+++ b/src/soc/intel/common/block/cse/cse.c
@@ -503,6 +503,28 @@
return 0;
}
+bool is_cse_enabled(void)
+{
+ const struct device *cse_dev = pcidev_path_on_root(PCH_DEVFN_CSE);
+
+ if (!cse_dev || !cse_dev->enabled) {
+ printk(BIOS_WARNING, "HECI: No CSE device\n");
+ return false;
+ }
+
+ if (pci_read_config16(PCH_DEV_CSE, PCI_VENDOR_ID) == 0xFFFF) {
+ printk(BIOS_WARNING, "HECI: CSE device is hidden\n");
+ return false;
+ }
+
+ return true;
+}
+
+uint32_t me_read_config32(int offset)
+{
+ return pci_read_config32(PCH_DEV_CSE, offset);
+}
+
#if ENV_RAMSTAGE
static void update_sec_bar(struct device *dev)
diff --git a/src/soc/intel/common/block/include/intelblocks/cse.h b/src/soc/intel/common/block/include/intelblocks/cse.h
index 424d483..bce615c 100644
--- a/src/soc/intel/common/block/include/intelblocks/cse.h
+++ b/src/soc/intel/common/block/include/intelblocks/cse.h
@@ -19,6 +19,16 @@
#include <stdint.h>
+/* HFSTS register offsets in PCI config space */
+enum {
+ PCI_ME_HFSTS1 = 0x40,
+ PCI_ME_HFSTS2 = 0x48,
+ PCI_ME_HFSTS3 = 0x60,
+ PCI_ME_HFSTS4 = 0x64,
+ PCI_ME_HFSTS5 = 0x68,
+ PCI_ME_HFSTS6 = 0x6C,
+};
+
/* set up device for use in early boot enviroument with temp bar */
void heci_init(uintptr_t bar);
/*
@@ -52,6 +62,16 @@
*/
int heci_reset(void);
+/* Reads config value from a specified offset in the CSE PCI Config space. */
+uint32_t me_read_config32(int offset);
+
+/*
+ * Check if the CSE device is enabled in device tree. Also check if the device
+ * is visible on the PCI bus by reading config space.
+ * Return true if device present and config space enabled, else return false.
+ */
+bool is_cse_enabled(void);
+
#define BIOS_HOST_ADDR 0x00
#define HECI_MKHI_ADDR 0x07
diff --git a/src/soc/intel/skylake/include/soc/me.h b/src/soc/intel/skylake/include/soc/me.h
index 5a9acd5..fbe5033 100644
--- a/src/soc/intel/skylake/include/soc/me.h
+++ b/src/soc/intel/skylake/include/soc/me.h
@@ -21,7 +21,6 @@
/*
* Management Engine PCI registers
*/
-#define PCI_ME_HFSTS1 0x40
#define ME_HFS_CWS_RESET 0
#define ME_HFS_CWS_INIT 1
#define ME_HFS_CWS_REC 2
@@ -169,7 +168,6 @@
} __packed fields;
};
-#define PCI_ME_HFSTS3 0x60
#define ME_HFS3_FW_SKU_CONSUMER 0x2
#define ME_HFS3_FW_SKU_CORPORATE 0x3
@@ -186,9 +184,6 @@
} __packed fields;
};
-#define PCI_ME_HFSTS4 0x64
-#define PCI_ME_HFSTS5 0x68
-#define PCI_ME_HFSTS6 0x6c
#define ME_HFS6_FPF_NOT_COMMITTED 0x0
#define ME_HFS6_FPF_ERROR 0x2
diff --git a/src/soc/intel/skylake/me.c b/src/soc/intel/skylake/me.c
index f7aa584..9e17ef1 100644
--- a/src/soc/intel/skylake/me.c
+++ b/src/soc/intel/skylake/me.c
@@ -26,10 +26,6 @@
#include <stdlib.h>
#include <string.h>
-static inline u32 me_read_config32(int offset)
-{
- return pci_read_config32(PCH_DEV_CSE, offset);
-}
/* HFSTS1[3:0] Current Working State Values */
static const char *const me_cws_values[] = {
@@ -242,6 +238,9 @@
if (!CONFIG(CONSOLE_SERIAL))
return;
+ if (!is_cse_enabled())
+ return;
+
hfs.data = me_read_config32(PCI_ME_HFSTS1);
/*
* This command can be run only if:
@@ -288,6 +287,9 @@
union me_hfs3 hfs3;
union me_hfs6 hfs6;
+ if (!is_cse_enabled())
+ return;
+
hfs.data = me_read_config32(PCI_ME_HFSTS1);
hfs2.data = me_read_config32(PCI_ME_HFSTS2);
hfs3.data = me_read_config32(PCI_ME_HFSTS3);
@@ -484,6 +486,9 @@
int status = -1;
union me_hfs hfs;
+ if (!is_cse_enabled())
+ goto ret;
+
/* Check ME operating mode */
hfs.data = me_read_config32(PCI_ME_HFSTS1);
if (hfs.fields.operation_mode)