util/spd_tools: Add LP5 support for ADL
Add LP5 support to spd_tools. Currently, only Intel Alder Lake (ADL) is
supported.
The SPDs are generated based on a combination of:
- The LPDDR5 spec JESD209-5B.
- The SPD spec SPD4.1.2.M-2 (the LPDDR3/4 spec is used since JEDEC has
not released an SPD spec for LPDDR5).
- Intel recommendations in advisory #616599.
BUG=b:201234943, b:198704251
TEST=Generate the SPD and manifests for a test part, and check that the
SPD matches Intel's expectation. More details in CB:58680.
Change-Id: Ic1e68d44f7c0ad64aa9904b7e1297d24bd5db56e
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
diff --git a/util/spd_tools/README.md b/util/spd_tools/README.md
index 5be666b..a422017 100644
--- a/util/spd_tools/README.md
+++ b/util/spd_tools/README.md
@@ -8,6 +8,9 @@
* LPDDR4x - based on the JESD209-4C spec and Intel recommendations
(docs #616599, #610202, #634730).
* DDR4 - based on the JESD79-4C and Jedec 4.1.2.L-5 R29 v103 specs.
+* LPDDR5 - based on the LPDDR5 spec JESD209-5B, the SPD spec SPD4.1.2.M-2 (the
+ LPDDR3/4 spec is used since JEDEC has not released an SPD spec for LPDDR5),
+ and Intel recommendations in advisory #616599.
There are two tools provided to assist with generating SPDs and Makefiles to
integrate into the coreboot build. These tools can also be used to allocate DRAM
@@ -292,6 +295,100 @@
}
```
+### LP5 attributes
+
+#### Mandatory
+
+* `densityPerDieGb`: Density per die in Gb. Valid values: `4, 6, 8, 12, 16,
+ 24, 32` Gb per die.
+
+* `diesPerPackage`: Number of physical dies in each SDRAM package. Valid
+ values: `2, 4, 8` dies per package.
+
+* `bitWidthPerChannel`: Width of each physical channel. Valid values: `8, 16`
+ bits.
+
+* `ranksPerChannel`: Number of ranks per physical channel. Valid values: `1,
+ 2`. If the channels across multiple dies share the same DQ/DQS pins but use
+ a separate CS, then ranks is 2 else it is 1.
+
+* `speedMbps`: Maximum data rate supported by the part in Mbps. Valid values:
+ `5500, 6400` Mbps.
+
+#### Optional
+
+* `trfcabNs`: Minimum Refresh Recovery Delay Time (tRFCab) for all banks in
+ nanoseconds. As per JESD209-5B, this is dependent on the density per die.
+ Default values used:
+
+ * 4 Gb : 180 ns
+ * 6 Gb : 210 ns
+ * 8 Gb : 210 ns
+ * 12 Gb: 280 ns
+ * 16 Gb: 280 ns
+ * 24 Gb: 380 ns
+ * 32 Gb: 380 ns
+
+* `trfcpbNs`: Minimum Refresh Recovery Delay Time (tRFCpb) per bank in
+ nanoseconds. As per JESD209-5B, this is dependent on the density per die.
+ Default values used:
+
+ * 4 Gb : 90 ns
+ * 6 Gb : 120 ns
+ * 8 Gb : 120 ns
+ * 12 Gb: 140 ns
+ * 16 Gb: 140 ns
+ * 24 Gb: 190 ns
+ * 32 Gb: 190 ns
+
+* `trpabMinNs`: Minimum Row Precharge Delay Time (tRPab) for all banks in
+ nanoseconds. As per JESD209-5B, this is max(21ns, 2nCK), which defaults to
+ `21 ns`.
+
+* `trppbMinNs`: Minimum Row Precharge Delay Time (tRPpb) per bank in
+ nanoseconds. As per JESD209-5B, this is max(18ns, 2nCK) which defaults to
+ `18 ns`.
+
+* `tckMinPs`: SDRAM minimum cycle time (tCKmin) value in picoseconds. LPDDR5
+ has two clocks: the command/addrees clock (CK) and the data clock (WCK).
+ They are related by the WCK:CK ratio, which can be either 4:1 or 2:1. For
+ LPDDR5, tCKmin is the CK period, which can be calculated from the
+ `speedMbps` attribute and the WCK:CK ratio as follows: `tCKmin = 1 /
+ (speedMbps / 2 / WCK:CK)`. The default values used are for a 4:1 WCK:CK
+ ratio:
+
+ * 6400 Mbps: 1250 ps
+ * 5500 Mbps: 1455 ps
+
+* `taaMinPs`: Minimum CAS Latency Time(tAAmin) in picoseconds. This value
+ defaults to nck * tCKmin, where nck is maximum CAS latency, and is
+ determined from the `speedMbps` attribute as per JESD209-5B:
+
+ * 6400 Mbps: 17
+ * 5500 Mbps: 15
+
+* `trcdMinNs`: Minimum RAS# to CAS# Delay Time (tRCDmin) in nanoseconds. As
+ per JESD209-5B, this is max(18ns, 2nCK) which defaults to `18 ns`.
+
+#### Example `memory_parts.json`
+
+```
+{
+ "parts": [
+ {
+ "name": "MT62F1G32D4DR-031 WT:B",
+ "attribs": {
+ "densityPerDieGb": 8,
+ "diesPerPackage": 4,
+ "bitWidthPerChannel": 16,
+ "ranksPerChannel": 2,
+ "speedMbps": 6400
+ }
+ },
+ ]
+}
+```
+
### Output
The `spd_gen` tool generates the directory structure shown below. The inputs to
diff --git a/util/spd_tools/src/part_id_gen/part_id_gen.go b/util/spd_tools/src/part_id_gen/part_id_gen.go
index c67f127..750b825 100644
--- a/util/spd_tools/src/part_id_gen/part_id_gen.go
+++ b/util/spd_tools/src/part_id_gen/part_id_gen.go
@@ -45,6 +45,7 @@
var supportedMemTechs = [...]string{
"lp4x",
"ddr4",
+ "lp5",
}
func usage() {
diff --git a/util/spd_tools/src/spd_gen/lp5.go b/util/spd_tools/src/spd_gen/lp5.go
new file mode 100644
index 0000000..2e52bd5
--- /dev/null
+++ b/util/spd_tools/src/spd_gen/lp5.go
@@ -0,0 +1,617 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+package main
+
+import (
+ "encoding/json"
+ "fmt"
+)
+
+/* ------------------------------------------------------------------------------------------ */
+/* LP5-defined types */
+/* ------------------------------------------------------------------------------------------ */
+
+type lp5 struct {
+}
+
+type LP5MemAttributes struct {
+ /* Primary attributes - must be provided by JSON file for each part */
+ DensityPerDieGb int
+ DiesPerPackage int
+ BitWidthPerChannel int
+ RanksPerChannel int
+ SpeedMbps int
+
+ /*
+ * All the following parameters are optional and required only if the part requires
+ * special parameters as per the datasheet.
+ */
+ /* Timing parameters */
+ TRFCABNs int
+ TRFCPBNs int
+ TRPABMinNs int
+ TRPPBMinNs int
+ TCKMinPs int
+ TAAMinPs int
+ TRCDMinNs int
+}
+
+type LP5DensityParams struct {
+ DensityEncoding byte
+ RowAddressBitsx8Channel int
+ RowAddressBitsx16Channel int
+ TRFCABNs int
+ TRFCPBNs int
+}
+
+type LP5SpeedParams struct {
+ TCKMinPs int
+ MaxCASLatency int
+}
+
+type LP5SPDAttribFunc func(*LP5MemAttributes) byte
+
+type LP5SPDAttribTableEntry struct {
+ constVal byte
+ getVal LP5SPDAttribFunc
+}
+
+/* ------------------------------------------------------------------------------------------ */
+/* Constants */
+/* ------------------------------------------------------------------------------------------ */
+
+const (
+ /* SPD Byte Index */
+ LP5SPDIndexSize = 0
+ LP5SPDIndexRevision = 1
+ LP5SPDIndexMemoryType = 2
+ LP5SPDIndexModuleType = 3
+ LP5SPDIndexDensityBanks = 4
+ LP5SPDIndexAddressing = 5
+ LP5SPDIndexPackageType = 6
+ LP5SPDIndexOptionalFeatures = 7
+ LP5SPDIndexModuleOrganization = 12
+ LP5SPDIndexBusWidth = 13
+ LP5SPDIndexTimebases = 17
+ LP5SPDIndexTCKMin = 18
+ LP5SPDIndexTAAMin = 24
+ LP5SPDIndexTRCDMin = 26
+ LP5SPDIndexTRPABMin = 27
+ LP5SPDIndexTRPPBMin = 28
+ LP5SPDIndexTRFCABMinLSB = 29
+ LP5SPDIndexTRFCABMinMSB = 30
+ LP5SPDIndexTRFCPBMinLSB = 31
+ LP5SPDIndexTRFCPBMinMSB = 32
+ LP5SPDIndexTRPPBMinFineOffset = 120
+ LP5SPDIndexTRPABMinFineOffset = 121
+ LP5SPDIndexTRCDMinFineOffset = 122
+ LP5SPDIndexTAAMinFineOffset = 123
+ LP5SPDIndexTCKMinFineOffset = 125
+ LP5SPDIndexManufacturerPartNumberStartByte = 329
+ LP5SPDIndexManufacturerPartNumberEndByte = 348
+
+ /* SPD Byte Value */
+
+ /*
+ * From JEDEC spec:
+ * 6:4 (Bytes total) = 2 (512 bytes)
+ * 3:0 (Bytes used) = 3 (384 bytes)
+ * Set to 0x23 for LPDDR5.
+ */
+ LP5SPDValueSize = 0x23
+
+ /*
+ * Revision 1.0.
+ */
+ LP5SPDValueRevision = 0x10
+
+ /*
+ * As per advisory #616599, ADL MRC expects LPDDR5 memory type = 0x13.
+ */
+ LP5SPDValueMemoryType = 0x13
+
+ /*
+ * From JEDEC spec:
+ * 7:7 (Hybrid) = 0 (Not hybrid)
+ * 6:4 (Hybrid media) = 000 (Not hybrid)
+ * 3:0 (Base Module Type) = 1110 (Non-DIMM solution)
+ *
+ * This is dependent on hardware design. LPDDR5 only has memory down solution.
+ * Hence this is not hybrid non-DIMM solution.
+ * Set to 0x0E.
+ */
+ LP5SPDValueModuleType = 0x0e
+
+ /*
+ * From JEDEC spec:
+ * 5:4 (Maximum Activate Window) = 00 (8192 * tREFI)
+ * 3:0 (Maximum Activate Count) = 1000 (Unlimited MAC)
+ * Set to 0x08.
+ */
+ LP5SPDValueOptionalFeatures = 0x08
+
+ /*
+ * For ADL (as per advisory #616599):
+ * 7:5 (Number of system channels) = 000 (1 channel always)
+ * 4:3 (Bus width extension) = 00 (no ECC)
+ * 2:0 (Bus width) = 001 (x16 always)
+ * Set to 0x01.
+ */
+ LP5SPDValueBusWidth = 0x01
+
+ /*
+ * From JEDEC spec:
+ * 3:2 (MTB) = 00 (0.125ns)
+ * 1:0 (FTB) = 00 (1ps)
+ * Set to 0x00.
+ */
+ LP5SPDValueTimebases = 0x00
+
+ /* As per JEDEC spec, unused digits of manufacturer part number are left as blank. */
+ LP5SPDValueManufacturerPartNumberBlank = 0x20
+)
+
+const (
+ /*
+ * LPDDR5 has a flexible bank architecture with three programmable bank modes: BG, 8B, 16B.
+ * ADL will use 8B mode for all parts.
+ *
+ * From JEDEC spec:
+ * 7:6 (Bank Group Bits) = 00 (no bank groups)
+ * 5:4 (Bank Address Bits) = 01 (8 banks)
+ * Set bits 7:4 to 0b0001.
+ */
+ LP5BankGroupsBanks = 0x1
+
+ /*
+ * Tables 8 and 9 from JESD209-5B.
+ * ADL uses 8B mode for all parts. The column addresses are the same for x8 and x16.
+ * Effective column address bits = column address bits + burst address bits = 6 + 5 = 11.
+ * As per JESD 21-C, this is encoded as 0b010.
+ */
+ LP5ColumnAddressBits = 0x2
+)
+
+/* ------------------------------------------------------------------------------------------ */
+/* Global variables */
+/* ------------------------------------------------------------------------------------------ */
+
+var LP5PlatformSetMap = map[int][]int{
+ 0: {PlatformADL},
+}
+
+var LP5PartAttributeMap = map[string]LP5MemAttributes{}
+var LP5CurrSet int
+
+/*
+ * DensityEncoding: Maps the die density in Gb to the SPD encoding of the die density
+ * as per JESD 21-C.
+ *
+ * RowAddressBits: Maps the die density to the number of row address bits.
+ * Tables 6-11 in JESD209-5B (same for all three bank modes).
+ *
+ * TRFCABNs/TRFCPBNs: Maps the die density to the refresh timings.
+ * Tables 235 and 236 in JESD209-5B (same for all three bank modes).
+ */
+var LP5DensityGbToSPDEncoding = map[int]LP5DensityParams{
+ 4: {
+ DensityEncoding: 0x4,
+ RowAddressBitsx8Channel: 15,
+ RowAddressBitsx16Channel: 14,
+ TRFCABNs: 180,
+ TRFCPBNs: 90,
+ },
+ 6: {
+ DensityEncoding: 0xb,
+ RowAddressBitsx8Channel: 16,
+ RowAddressBitsx16Channel: 15,
+ TRFCABNs: 210,
+ TRFCPBNs: 120,
+ },
+ 8: {
+ DensityEncoding: 0x5,
+ RowAddressBitsx8Channel: 16,
+ RowAddressBitsx16Channel: 15,
+ TRFCABNs: 210,
+ TRFCPBNs: 120,
+ },
+ 12: {
+ DensityEncoding: 0x8,
+ RowAddressBitsx8Channel: 17,
+ RowAddressBitsx16Channel: 16,
+ TRFCABNs: 280,
+ TRFCPBNs: 140,
+ },
+ 16: {
+ DensityEncoding: 0x6,
+ RowAddressBitsx8Channel: 17,
+ RowAddressBitsx16Channel: 16,
+ TRFCABNs: 280,
+ TRFCPBNs: 140,
+ },
+ 24: {
+ DensityEncoding: 0x9,
+ RowAddressBitsx8Channel: 18,
+ RowAddressBitsx16Channel: 17,
+ TRFCABNs: 380,
+ TRFCPBNs: 190,
+ },
+ 32: {
+ DensityEncoding: 0x7,
+ RowAddressBitsx8Channel: 18,
+ RowAddressBitsx16Channel: 17,
+ TRFCABNs: 380,
+ TRFCPBNs: 190,
+ },
+}
+
+/*
+ * Maps the number of row address bits to the SPD encoding as per JESD 21-C.
+ */
+var LP5RowAddressBitsEncoding = map[int]byte{
+ 14: 0x2,
+ 15: 0x3,
+ 16: 0x4,
+ 17: 0x5,
+ 18: 0x6,
+}
+
+/*
+ * TCKMinPs:
+ * LPDDR5 has two clocks: the command/address clock (CK) and the data clock (WCK). They are
+ * related by the WCK:CK ratio, which can be either 4:1 or 2:1. On ADL, 4:1 is used.
+ * For ADL, the MRC expects the tCKmin to encode the CK period. This is calculated as:
+ * tCKmin = 1 / CK rate
+ * = 1 / (WCK rate / WCK:CK)
+ * = 1 / (speed grade / 2 / WCK:CK) // "double data rate"
+ *
+ * MaxCASLatency:
+ * From Table 220 of JESD209-5B, using a 4:1 WCK:CK ratio and Set 0.
+ */
+var LP5SpeedMbpsToSPDEncoding = map[int]LP5SpeedParams{
+ 6400: {
+ TCKMinPs: 1250, /* 1 / (6400 / 2 / 4) */
+ MaxCASLatency: 17,
+ },
+ 5500: {
+ TCKMinPs: 1455, /* 1 / (5500 / 2 / 4) */
+ MaxCASLatency: 15,
+ },
+}
+
+var LP5SPDAttribTable = map[int]LP5SPDAttribTableEntry{
+ LP5SPDIndexSize: {constVal: LP5SPDValueSize},
+ LP5SPDIndexRevision: {constVal: LP5SPDValueRevision},
+ LP5SPDIndexMemoryType: {constVal: LP5SPDValueMemoryType},
+ LP5SPDIndexModuleType: {constVal: LP5SPDValueModuleType},
+ LP5SPDIndexDensityBanks: {getVal: LP5EncodeDensityBanks},
+ LP5SPDIndexAddressing: {getVal: LP5EncodeSdramAddressing},
+ LP5SPDIndexPackageType: {getVal: LP5EncodePackageType},
+ LP5SPDIndexOptionalFeatures: {constVal: LP5SPDValueOptionalFeatures},
+ LP5SPDIndexModuleOrganization: {getVal: LP5EncodeModuleOrganization},
+ LP5SPDIndexBusWidth: {constVal: LP5SPDValueBusWidth},
+ LP5SPDIndexTimebases: {constVal: LP5SPDValueTimebases},
+ LP5SPDIndexTCKMin: {getVal: LP5EncodeTCKMin},
+ LP5SPDIndexTCKMinFineOffset: {getVal: LP5EncodeTCKMinFineOffset},
+ LP5SPDIndexTAAMin: {getVal: LP5EncodeTAAMin},
+ LP5SPDIndexTAAMinFineOffset: {getVal: LP5EncodeTAAMinFineOffset},
+ LP5SPDIndexTRCDMin: {getVal: LP5EncodeTRCDMin},
+ LP5SPDIndexTRCDMinFineOffset: {getVal: LP5EncodeTRCDMinFineOffset},
+ LP5SPDIndexTRPABMin: {getVal: LP5EncodeTRPABMin},
+ LP5SPDIndexTRPABMinFineOffset: {getVal: LP5EncodeTRPABMinFineOffset},
+ LP5SPDIndexTRPPBMin: {getVal: LP5EncodeTRPPBMin},
+ LP5SPDIndexTRPPBMinFineOffset: {getVal: LP5EncodeTRPPBMinFineOffset},
+ LP5SPDIndexTRFCABMinLSB: {getVal: LP5EncodeTRFCABMinLsb},
+ LP5SPDIndexTRFCABMinMSB: {getVal: LP5EncodeTRFCABMinMsb},
+ LP5SPDIndexTRFCPBMinLSB: {getVal: LP5EncodeTRFCPBMinLsb},
+ LP5SPDIndexTRFCPBMinMSB: {getVal: LP5EncodeTRFCPBMinMsb},
+}
+
+/* ------------------------------------------------------------------------------------------ */
+/* Functions */
+/* ------------------------------------------------------------------------------------------ */
+
+func LP5EncodeDensityBanks(memAttribs *LP5MemAttributes) byte {
+ var b byte
+
+ // 3:0 Density per die.
+ b = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].DensityEncoding
+
+ // 5:4 Bank address bits.
+ // 7:6 Bank group bits.
+ b |= LP5BankGroupsBanks << 4
+
+ return b
+}
+
+func LP5EncodeSdramAddressing(memAttribs *LP5MemAttributes) byte {
+ var b byte
+
+ // 2:0 Column address bits.
+ b = LP5ColumnAddressBits
+
+ // 5:3 Row address bits.
+ density := memAttribs.DensityPerDieGb
+ var rowAddressBits int
+ if memAttribs.BitWidthPerChannel == 8 {
+ rowAddressBits = LP5DensityGbToSPDEncoding[density].RowAddressBitsx8Channel
+ } else {
+ rowAddressBits = LP5DensityGbToSPDEncoding[density].RowAddressBitsx16Channel
+ }
+ b |= LP5RowAddressBitsEncoding[rowAddressBits] << 3
+
+ return b
+}
+
+func LP5EncodePackageType(memAttribs *LP5MemAttributes) byte {
+ var b byte
+
+ // 1:0 Signal loading index.
+ b = 1
+
+ // 3:2 Channels per package.
+ // Channels per package = package width (e.g. x32) / bitWidthPerChannel (x8 or x16).
+ // This can equivalently be calculated as diesPerPackage / ranksPerChannel.
+ // This calculation is used to avoid adding a redundant attribute for package width.
+ channels := memAttribs.DiesPerPackage / memAttribs.RanksPerChannel
+ b |= byte(channels>>1) << 2
+
+ // 6:4 Dies per package.
+ b |= (byte(memAttribs.DiesPerPackage) - 1) << 4
+
+ // 7:7 Package type.
+ var packageType byte
+ if memAttribs.DiesPerPackage > 1 {
+ packageType = 1 // Non-Monolithic
+ } else {
+ packageType = 0 // Monolithic
+ }
+ b |= packageType << 7
+
+ return b
+}
+
+func LP5EncodeModuleOrganization(memAttribs *LP5MemAttributes) byte {
+ var b byte
+
+ // 2:0 Device data width per channel
+ b = byte(memAttribs.BitWidthPerChannel / 8)
+
+ // 5:3 Package ranks per channel
+ b |= byte(memAttribs.RanksPerChannel-1) << 3
+
+ return b
+}
+
+func LP5EncodeTCKMin(memAttribs *LP5MemAttributes) byte {
+ return convPsToMtbByte(memAttribs.TCKMinPs)
+}
+
+func LP5EncodeTCKMinFineOffset(memAttribs *LP5MemAttributes) byte {
+ return convPsToFtbByte(memAttribs.TCKMinPs)
+}
+
+func LP5EncodeTAAMin(memAttribs *LP5MemAttributes) byte {
+ return convPsToMtbByte(memAttribs.TAAMinPs)
+}
+
+func LP5EncodeTAAMinFineOffset(memAttribs *LP5MemAttributes) byte {
+ return convPsToFtbByte(memAttribs.TAAMinPs)
+}
+
+func LP5EncodeTRCDMin(memAttribs *LP5MemAttributes) byte {
+ return convNsToMtbByte(memAttribs.TRCDMinNs)
+}
+
+func LP5EncodeTRCDMinFineOffset(memAttribs *LP5MemAttributes) byte {
+ return convNsToFtbByte(memAttribs.TRCDMinNs)
+}
+
+func LP5EncodeTRPABMin(memAttribs *LP5MemAttributes) byte {
+ return convNsToMtbByte(memAttribs.TRPABMinNs)
+}
+
+func LP5EncodeTRPABMinFineOffset(memAttribs *LP5MemAttributes) byte {
+ return convNsToFtbByte(memAttribs.TRPABMinNs)
+}
+
+func LP5EncodeTRPPBMin(memAttribs *LP5MemAttributes) byte {
+ return convNsToMtbByte(memAttribs.TRPPBMinNs)
+}
+
+func LP5EncodeTRPPBMinFineOffset(memAttribs *LP5MemAttributes) byte {
+ return convNsToFtbByte(memAttribs.TRPPBMinNs)
+}
+
+func LP5EncodeTRFCABMinMsb(memAttribs *LP5MemAttributes) byte {
+ return byte((convNsToMtb(memAttribs.TRFCABNs) >> 8) & 0xff)
+}
+
+func LP5EncodeTRFCABMinLsb(memAttribs *LP5MemAttributes) byte {
+ return byte(convNsToMtb(memAttribs.TRFCABNs) & 0xff)
+}
+
+func LP5EncodeTRFCPBMinMsb(memAttribs *LP5MemAttributes) byte {
+ return byte((convNsToMtb(memAttribs.TRFCPBNs) >> 8) & 0xff)
+}
+
+func LP5EncodeTRFCPBMinLsb(memAttribs *LP5MemAttributes) byte {
+ return byte(convNsToMtb(memAttribs.TRFCPBNs) & 0xff)
+}
+
+func LP5UpdateTCKMin(memAttribs *LP5MemAttributes) {
+ if memAttribs.TCKMinPs == 0 {
+ memAttribs.TCKMinPs = LP5SpeedMbpsToSPDEncoding[memAttribs.SpeedMbps].TCKMinPs
+ }
+}
+
+func LP5UpdateTAAMin(memAttribs *LP5MemAttributes) {
+ if memAttribs.TAAMinPs == 0 {
+ maxCAS := LP5SpeedMbpsToSPDEncoding[memAttribs.SpeedMbps].MaxCASLatency
+ memAttribs.TAAMinPs = memAttribs.TCKMinPs * maxCAS
+ }
+}
+
+func LP5UpdateTRFCAB(memAttribs *LP5MemAttributes) {
+ if memAttribs.TRFCABNs == 0 {
+ memAttribs.TRFCABNs = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].TRFCABNs
+ }
+}
+
+func LP5UpdateTRFCPB(memAttribs *LP5MemAttributes) {
+ if memAttribs.TRFCPBNs == 0 {
+ memAttribs.TRFCPBNs = LP5DensityGbToSPDEncoding[memAttribs.DensityPerDieGb].TRFCPBNs
+ }
+}
+
+func LP5UpdateTRCD(memAttribs *LP5MemAttributes) {
+ if memAttribs.TRCDMinNs == 0 {
+ /* Table 372 from JESD209-5B */
+ memAttribs.TRCDMinNs = 18
+ }
+}
+
+func LP5UpdateTRPAB(memAttribs *LP5MemAttributes) {
+ if memAttribs.TRPABMinNs == 0 {
+ /* Table 372 from JESD209-5B */
+ memAttribs.TRPABMinNs = 21
+ }
+}
+
+func LP5UpdateTRPPB(memAttribs *LP5MemAttributes) {
+ if memAttribs.TRPPBMinNs == 0 {
+ /* Table 372 from JESD209-5B */
+ memAttribs.TRPPBMinNs = 18
+ }
+}
+
+func lp5UpdateMemoryAttributes(memAttribs *LP5MemAttributes) {
+ LP5UpdateTCKMin(memAttribs)
+ LP5UpdateTAAMin(memAttribs)
+ LP5UpdateTRFCAB(memAttribs)
+ LP5UpdateTRFCPB(memAttribs)
+ LP5UpdateTRCD(memAttribs)
+ LP5UpdateTRPAB(memAttribs)
+ LP5UpdateTRPPB(memAttribs)
+}
+
+func LP5ValidateDensity(density int) error {
+ if _, ok := LP5DensityGbToSPDEncoding[density]; !ok {
+ return fmt.Errorf("Incorrect density per die: %d Gb", density)
+ }
+ return nil
+}
+
+func LP5ValidateDies(dies int) error {
+ if dies != 2 && dies != 4 && dies != 8 {
+ return fmt.Errorf("Incorrect dies: %d", dies)
+ }
+ return nil
+}
+
+func LP5ValidateDataWidth(width int) error {
+ if width != 8 && width != 16 {
+ return fmt.Errorf("Incorrect bit width: %d", width)
+ }
+ return nil
+}
+
+func LP5ValidateRanks(ranks int) error {
+ if ranks != 1 && ranks != 2 {
+ return fmt.Errorf("Incorrect ranks: %d", ranks)
+ }
+ return nil
+}
+
+func LP5ValidateSpeed(speed int) error {
+ if _, ok := LP5SpeedMbpsToSPDEncoding[speed]; !ok {
+ return fmt.Errorf("Incorrect speed: %d Mbps", speed)
+ }
+ return nil
+}
+
+func lp5ValidateMemPartAttributes(memAttribs *LP5MemAttributes) error {
+ if err := LP5ValidateDensity(memAttribs.DensityPerDieGb); err != nil {
+ return err
+ }
+ if err := LP5ValidateDies(memAttribs.DiesPerPackage); err != nil {
+ return err
+ }
+ if err := LP5ValidateDataWidth(memAttribs.BitWidthPerChannel); err != nil {
+ return err
+ }
+ if err := LP5ValidateRanks(memAttribs.RanksPerChannel); err != nil {
+ return err
+ }
+ if err := LP5ValidateSpeed(memAttribs.SpeedMbps); err != nil {
+ return err
+ }
+
+ return nil
+}
+
+func LP5IsManufacturerPartNumberByte(index int) bool {
+ if index >= LP5SPDIndexManufacturerPartNumberStartByte &&
+ index <= LP5SPDIndexManufacturerPartNumberEndByte {
+ return true
+ }
+ return false
+}
+
+/* ------------------------------------------------------------------------------------------ */
+/* Interface Functions */
+/* ------------------------------------------------------------------------------------------ */
+
+func (lp5) getSetMap() map[int][]int {
+ return LP5PlatformSetMap
+}
+
+func (lp5) addNewPart(name string, attribs interface{}) error {
+ var lp5Attributes LP5MemAttributes
+ eByte, err := json.Marshal(attribs)
+ if err != nil {
+ return err
+ }
+
+ if err := json.Unmarshal(eByte, &lp5Attributes); err != nil {
+ return err
+ }
+
+ if err := lp5ValidateMemPartAttributes(&lp5Attributes); err != nil {
+ return err
+ }
+
+ LP5PartAttributeMap[name] = lp5Attributes
+ return nil
+}
+
+func (lp5) getSPDAttribs(name string, set int) (interface{}, error) {
+ lp5Attributes := LP5PartAttributeMap[name]
+
+ LP5CurrSet = set
+
+ lp5UpdateMemoryAttributes(&lp5Attributes)
+
+ return lp5Attributes, nil
+}
+
+func (lp5) getSPDLen() int {
+ return 512
+}
+
+func (lp5) getSPDByte(index int, attribs interface{}) byte {
+ e, ok := LP5SPDAttribTable[index]
+ if !ok {
+ if LP5IsManufacturerPartNumberByte(index) {
+ return LP5SPDValueManufacturerPartNumberBlank
+ }
+ return 0x00
+ }
+
+ if e.getVal != nil {
+ var lp5Attribs LP5MemAttributes
+ lp5Attribs = attribs.(LP5MemAttributes)
+ return e.getVal(&lp5Attribs)
+ }
+
+ return e.constVal
+}
diff --git a/util/spd_tools/src/spd_gen/spd_gen.go b/util/spd_tools/src/spd_gen/spd_gen.go
index 57b428b..fa65492 100644
--- a/util/spd_tools/src/spd_gen/spd_gen.go
+++ b/util/spd_tools/src/spd_gen/spd_gen.go
@@ -65,6 +65,12 @@
PlatformCZN: "CZN",
}
+var memTechMap = map[string]memTech{
+ "lp4x": lp4x{},
+ "ddr4": ddr4{},
+ "lp5": lp5{},
+}
+
/* ------------------------------------------------------------------------------------------ */
/* Conversion Helper Functions */
/* ------------------------------------------------------------------------------------------ */
@@ -211,7 +217,9 @@
fmt.Printf("\nUsage: %s <mem_parts_list_json> <mem_technology>\n\n", os.Args[0])
fmt.Printf(" where,\n")
fmt.Printf(" mem_parts_list_json = JSON File containing list of memory parts and attributes\n")
- fmt.Printf(" mem_technology = Memory technology -- one of lp4x, ddr4\n\n\n")
+ fmt.Printf(" mem_technology = Memory technology for which to generate SPDs\n")
+ fmt.Printf(" supported technologies: %v\n\n\n",
+ reflect.ValueOf(memTechMap).MapKeys())
}
func main() {
@@ -223,11 +231,8 @@
var t memTech
memPartsFilePath, memTechnology := os.Args[1], os.Args[2]
- if strings.ToUpper(memTechnology) == "LP4X" {
- t = lp4x{}
- } else if strings.ToUpper(memTechnology) == "DDR4" {
- t = ddr4{}
- } else {
+ t, ok := memTechMap[strings.ToLower(memTechnology)]
+ if !ok {
log.Fatal("Unsupported memory technology ", memTechnology)
}