Add AMD Agesa and AMD CIMx SB800 code. Patch 1 of 8.
This code currently generates many warnings that are functionally benign. These are being addressed, but the wheels of bureaucracy turn slowly. This drop supports AMD cpu families 10h and 14h. Only Family 14h is used as an example in this set of patches. Other cpu families are supported by the infrastructure, but their specific support is not included herein. This patch is functionally independent of the other patches in this set.
Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/vendorcode/amd/cimx/sb800/SBMAIN.c b/src/vendorcode/amd/cimx/sb800/SBMAIN.c
new file mode 100644
index 0000000..fb3f8d1
--- /dev/null
+++ b/src/vendorcode/amd/cimx/sb800/SBMAIN.c
@@ -0,0 +1,258 @@
+/**
+ * @file
+ *
+ * SB Initialization.
+ *
+ * Init IOAPIC/IOMMU/Misc NB features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: CIMx-SB
+ * @e sub-project:
+ * @e \$Revision:$ @e \$Date:$
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ***************************************************************************
+ *
+ */
+
+#include "SBPLATFORM.h"
+#include "cbtypes.h"
+
+#ifndef B1_IMAGE
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * sbBeforePciInit - Config Southbridge before PCI emulation
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+
+VOID
+sbBeforePciInit (
+ IN AMDSBCFG* pConfig
+ )
+{
+ commonInitEarlyBoot (pConfig);
+ commonInitEarlyPost (pConfig);
+#ifndef NO_EC_SUPPORT
+ ecInitBeforePciEnum (pConfig);
+#endif
+ usbInitBeforePciEnum (pConfig); // USB POST TIME Only
+ sataInitBeforePciEnum (pConfig); // Init SATA class code and PHY
+ gecInitBeforePciEnum (pConfig); // Init GEC
+ azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio
+ sbPcieGppEarlyInit (pConfig); // Gpp port init
+ abSpecialSetBeforePciEnum (pConfig);
+ usbDesertPll (pConfig);
+}
+
+/**
+ * sbAfterPciInit - Config Southbridge after PCI emulation
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+VOID
+sbAfterPciInit (
+ IN AMDSBCFG* pConfig
+ )
+{
+ usbInitAfterPciInit (pConfig); // Init USB MMIO
+ sataInitAfterPciEnum (pConfig); // SATA port enumeration
+ gecInitAfterPciEnum (pConfig);
+ azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio
+
+#ifndef NO_HWM_SUPPORT
+ hwmInit (pConfig);
+#endif
+}
+
+/**
+ * sbMidPostInit - Config Southbridge during middle of POST
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+VOID
+sbMidPostInit (
+ IN AMDSBCFG* pConfig
+ )
+{
+ sataInitMidPost (pConfig);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * sbLatePost - Prepare Southbridge to boot to OS.
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+VOID
+sbLatePost (
+ IN AMDSBCFG* pConfig
+ )
+{
+// UINT16 dwVar;
+ BUILDPARAM *pStaticOptions;
+ pStaticOptions = &(pConfig->BuildParameters);
+ commonInitLateBoot (pConfig);
+ sataInitLatePost (pConfig);
+ gecInitLatePost (pConfig);
+ hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit
+#ifndef NO_EC_SUPPORT
+ ecInitLatePost (pConfig);
+#endif
+ sbPcieGppLateInit (pConfig);
+
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * sbBeforePciRestoreInit - Config Southbridge before ACPI S3 resume PCI config device restore
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+
+VOID
+sbBeforePciRestoreInit (
+ IN AMDSBCFG* pConfig
+ )
+{
+ pConfig->S3Resume = 1;
+ commonInitEarlyBoot (pConfig); // set /SMBUS/ACPI/IDE/LPC/PCIB
+ abLinkInitBeforePciEnum (pConfig); // Set ABCFG registers
+ usbInitBeforePciEnum (pConfig); // USB POST TIME Only
+ sataInitBeforePciEnum (pConfig);
+ gecInitBeforePciEnum (pConfig); // Init GEC
+ azaliaInitBeforePciEnum (pConfig); // Detect and configure High Definition Audio
+ sbPcieGppEarlyInit (pConfig); // Gpp port init
+ abSpecialSetBeforePciEnum (pConfig);
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * sbAfterPciRestoreInit - Config Southbridge after ACPI S3 resume PCI config device restore
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+
+VOID
+sbAfterPciRestoreInit (
+ IN AMDSBCFG* pConfig
+ )
+{
+ BUILDPARAM *pStaticOptions;
+
+ pConfig->S3Resume = 1;
+
+ usbSetPllDuringS3 (pConfig);
+ pStaticOptions = &(pConfig->BuildParameters);
+ commonInitLateBoot (pConfig);
+ sataInitAfterPciEnum (pConfig);
+ gecInitAfterPciEnum (pConfig);
+ azaliaInitAfterPciEnum (pConfig); // Detect and configure High Definition Audio
+ hpetInit (pConfig, pStaticOptions); // SB Configure HPET base and enable bit
+ sataInitLatePost (pConfig);
+ c3PopupSetting (pConfig);
+
+#ifndef NO_HWM_SUPPORT
+ SBIMCFanInitializeS3 ();
+#endif
+}
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * sbSmmAcpiOn - Config Southbridge during ACPI_ON
+ *
+ *
+ *
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ *
+ */
+VOID
+sbSmmAcpiOn (
+ IN AMDSBCFG* pConfig
+ )
+{
+ // Commented the following code since we need to leave the IRQ1/12 filtering enabled always as per latest
+ // recommendation in RPR. This is required to fix the keyboard stuck issue when playing games under Windows
+ AMDSBCFG* pTmp; //lx-dummy for /W4 build
+ pTmp = pConfig;
+
+ // Disable Power Button SMI
+ RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGB2, AccWidthUint8, ~(BIT4 + BIT5), 0);
+ RWMEM (ACPI_MMIO_BASE + SMI_BASE + SB_SMI_REGAC, AccWidthUint8, ~(BIT6 + BIT7), 0);
+}
+
+#endif
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Call Back routine.
+ *
+ *
+ *
+ * @param[in] Func Callback ID.
+ * @param[in] Data Callback specific data.
+ * @param[in] pConfig Southbridge configuration structure pointer.
+ */
+UINTN
+CallBackToOEM (
+ IN UINT32 Func,
+ IN UINT32 Data,
+ IN AMDSBCFG* pConfig
+ )
+{
+ UINT32 Result;
+ Result = 0;
+ if ( pConfig->StdHeader.CALLBACK.CalloutPtr == NULL ) return Result;
+ Result = (pConfig->StdHeader.CALLBACK.CalloutPtr) ( Func, Data, pConfig);
+
+ return Result;
+}
+
+