blob: 1ecc82ba6918117c0df831a1a365b0f349ab3b5a [file] [log] [blame]
#
# This file is part of the coreboot project.
#
# Copyright (C) 2015-2017 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "128 * MiB"
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 95,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 84,
.fall_time_ns = 4,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 117,
.fall_time_ns = 113,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 82,
.fall_time_ns = 67,
}"
device cpu_cluster 0 on
device lapic 10 on end
end
device domain 0 on
subsystemid 0x1022 0x1410 inherit
device pci 0.0 on end # Root Complex
device pci 1.0 on end # Internal Graphics P2P bridge 0x98e4
device pci 1.1 on end # Internal Multimedia
device pci 2.0 on end # PCIe Host Bridge
device pci 2.1 on end #
device pci 2.2 on end #
device pci 2.3 on end #
device pci 2.4 on
chip drivers/generic/bayhub
register "power_saving" = "1"
device pci 00.0 on end
end
end #
device pci 2.5 on end #
device pci 8.0 on end # PSP
device pci 9.0 on end # PCIe Host Bridge
device pci 9.2 on end # HDA
device pci 10.0 on end # xHCI
device pci 11.0 on end # SATA
device pci 12.0 on end # EHCI
device pci 14.0 on # SMbus
end # SMbus
device pci 14.3 on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end # LPC
device pci 14.7 on end # SD
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
device pci 18.5 on end
end #domain
device mmio 0xfedc2000 on
chip drivers/generic/adau7002
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device mmio 0xfedc3000 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device mmio 0xfedc4000 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
device i2c 15 on end
end
end
device mmio 0xfedc5000 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
end
end #chip soc/amd/stoneyridge