/* SPDX-License-Identifier: GPL-2.0-only */

#include <delay.h>
#include <soc/rtc.h>
#include <soc/rtc_common.h>
#include <soc/mt6391.h>
#include <soc/pmic_wrap.h>
#include <types.h>

/* initialize rtc related gpio */
static bool rtc_gpio_init(void)
{
	u16 con;

	mt6391_gpio_set_pull(3, MT6391_GPIO_PULL_DISABLE,
				MT6391_GPIO_PULL_DOWN);  /* RTC_32K1V8 */

	/* Export 32K clock RTC_32K2V8 */
	rtc_read(RTC_CON, &con);
	con &= (RTC_CON_LPSTA_RAW | RTC_CON_LPRST | RTC_CON_LPEN);
	con |= (RTC_CON_GPEN | RTC_CON_GOE);
	con &= ~(RTC_CON_F32KOB);
	rtc_write(RTC_CON, con);
	return rtc_write_trigger();
}

/* set xosc mode */
void rtc_osc_init(void)
{
	u16 con;

	/* enable 32K export */
	rtc_gpio_init();

	rtc_write(PMIC_RG_TOP_CKTST2, 0x0);
	rtc_read(RTC_OSC32CON, &con);
	if ((con & 0x1f) != 0x0)	/* check XOSCCALI */
		rtc_xosc_write(0x3);
}

/* low power detect setting */
static bool rtc_lpd_init(void)
{
	pwrap_write_field(RTC_CON, RTC_CON_LPEN, RTC_CON_LPRST, 0);
	if (!rtc_write_trigger())
		return false;

	pwrap_write_field(RTC_CON, RTC_CON_LPRST, 0, 0);
	if (!rtc_write_trigger())
		return false;

	pwrap_write_field(RTC_CON, 0, RTC_CON_LPRST, 0);
	if (!rtc_write_trigger())
		return false;

	return true;
}

/* rtc init check */
int rtc_init(int recover)
{
	int ret;

	rtc_info("recovery: %d\n", recover);

	if (!rtc_writeif_unlock()) {
		ret = -RTC_STATUS_WRITEIF_UNLOCK_FAIL;
		goto err;
	}

	if (!rtc_gpio_init()) {
		ret = -RTC_STATUS_GPIO_INIT_FAIL;
		goto err;
	}

	/* Use SW to detect 32K mode instead of HW */
	if (recover)
		pwrap_write_field(PMIC_RG_CHRSTATUS, 0x4, 0x1, 9);

	if (!rtc_xosc_write(0x3)) {
		ret = -RTC_STATUS_OSC_SETTING_FAIL;
		goto err;
	}

	/* In recovery mode, we need delay for register setting. */
	if (recover)
		mdelay(1000);

	/* write powerkeys */
	rtc_write(RTC_POWERKEY1, RTC_POWERKEY1_KEY);
	rtc_write(RTC_POWERKEY2, RTC_POWERKEY2_KEY);
	if (!rtc_write_trigger()) {
		ret = -RTC_STATUS_POWERKEY_INIT_FAIL;
		goto err;
	}

	if (recover)
		pwrap_write_field(PMIC_RG_CHRSTATUS, 0, 0x4, 9);

	if (!rtc_xosc_write(0)) {
		ret = -RTC_STATUS_OSC_SETTING_FAIL;
		goto err;
	}

	if (!rtc_reg_init()) {
		ret = -RTC_STATUS_REG_INIT_FAIL;
		goto err;
	}

	if (!rtc_lpd_init()) {
		ret = -RTC_STATUS_LPD_INIT_FAIL;
		goto err;
	}

	return RTC_STATUS_OK;
err:
	rtc_info("init fail: ret=%d\n", ret);
	return ret;
}

/* enable rtc bbpu */
static void rtc_bbpu_power_on(void)
{
	u16 bbpu;
	int ret;

	/* pull PWRBB high */
	bbpu = RTC_BBPU_KEY | RTC_BBPU_AUTO | RTC_BBPU_BBPU | RTC_BBPU_PWREN;
	rtc_write(RTC_BBPU, bbpu);
	ret = rtc_write_trigger();
	rtc_info("rtc_write_trigger=%d\n", ret);

	/* enable DCXO to transform external 32KHz clock to 26MHz clock
	   directly sent to SoC */
	pwrap_write_field(PMIC_RG_DCXO_FORCE_MODE1, BIT(11), 0, 0);
	pwrap_write_field(PMIC_RG_DCXO_POR2_CON3,
		     BIT(8) | BIT(9) | BIT(10) | BIT(11), 0, 0);
	pwrap_write_field(PMIC_RG_DCXO_CON2,
		     BIT(1) | BIT(3) | BIT(5) | BIT(6), 0, 0);

	rtc_read(RTC_BBPU, &bbpu);
	rtc_info("done BBPU=%#x\n", bbpu);

	/* detect hw clock done,close RG_RTC_75K_PDN for low power setting. */
	pwrap_write_field(PMIC_RG_TOP_CKPDN2, 0x1, 0, 14);
}

/* the rtc boot flow entry */
void rtc_boot(void)
{
	rtc_write(PMIC_RG_TOP_CKPDN, 0);
	rtc_write(PMIC_RG_TOP_CKPDN2, 0);

	rtc_boot_common();
	rtc_bbpu_power_on();
}