commit | 543c79224c1c7f46835187976025311a36f4204b | [log] [tgz] |
---|---|---|
author | Nico Huber <nico.h@gmx.de> | Tue Feb 22 18:58:48 2022 +0100 |
committer | Felix Held <felix-coreboot@felixheld.de> | Wed Jun 15 18:06:05 2022 +0000 |
tree | 1735ab9ca5b7cfd6da5d7e98fa8de6d08d3b437b | |
parent | e3816794737f2eef53843669973018de972afb98 [diff] |
libpayload/Makefile.payload: Revise config strategy Payloads often just use one of the defconfigs for libpayload. When the `Makefile.payload` was introduced, it also added dependencies to pass a `make oldconfig` or `make defconfig` for the payload on to libpayload. Turned out, this creates some dependency madness when, for instance, `make oldconfig` gets called without a libpay- load `.config` available, or when we try to include the `.config` in the `Makefile`. To make things worse, Kconfig's `Makefile` that is imported from Linux contains some rarely used paths that are generally incompa- tible to our environment. So let's get rid of the hard-to-control automatism. Payloads that don't want to use a libpayload defconfig need to clear the `$(LIBPAYLOAD_DEFCONFIG)` variable and manually run the respective config target to generate a `.config`. To fully support this, the rule to create a `.config` via `defconfig` is guarded by `$(LIBPAYLOAD_DEFCONFIG)`. Otherwise we'd have a spurious, broken recipe when the variable is unset. We keep the option to call libpayload targets with an `lp-` prefix for convenience. The existing, explicit targets `lp-defconfig` and `lp-oldconfig` are replaced with a pattern match, so all config and other targets should work. Change-Id: Ie3fcce58d98e248c7182cd47f2a797fe066dd18a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Thomas Heijligen <src@posteo.de>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAIN
Kconfig option if you're feeling lucky (no support in this case).Optional:
make menuconfig
and make nconfig
)Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.