mainboard/intel/galileo: Add GPIO initialization
Add Kconfig to configure coreboot for a specific Galileo board.
Configure the GPIOs for the specific Galileo board.
TEST=Build and run on Galileo Gen2
Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14826
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/mainboard/intel/galileo/gen1.h b/src/mainboard/intel/galileo/gen1.h
new file mode 100644
index 0000000..c718b61
--- /dev/null
+++ b/src/mainboard/intel/galileo/gen1.h
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2016 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+static const struct reg_script gen1_gpio_init[] = {
+ /* Initialize the legacy GPIO controller */
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGEN_CORE_WELL, 0x03),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGIO_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGLVL_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTPE_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTNE_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGGPE_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGSMI_CORE_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTS_CORE_WELL, 0x03),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_CNMIEN_CORE_WELL, 0x00),
+
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGEN_RESUME_WELL, 0x3f),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGIO_RESUME_WELL, 0x21),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGLVL_RESUME_WELL, 0x14),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTPE_RESUME_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTNE_RESUME_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGGPE_RESUME_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGSMI_RESUME_WELL, 0x00),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTS_RESUME_WELL, 0x3f),
+ REG_LEG_GPIO_WRITE(R_QNC_GPIO_RNMIEN_RESUME_WELL, 0x00),
+
+ /* Initialize the GPIO controller */
+ REG_GPIO_WRITE(GPIO_INTEN, 0),
+ REG_GPIO_WRITE(GPIO_INTSTATUS, 0),
+ REG_GPIO_WRITE(GPIO_SWPORTA_DR, 5),
+ REG_GPIO_WRITE(GPIO_SWPORTA_DDR, 0x15),
+ REG_GPIO_WRITE(GPIO_INTMASK, 0),
+ REG_GPIO_WRITE(GPIO_INTTYPE_LEVEL, 0),
+ REG_GPIO_WRITE(GPIO_INT_POLARITY, 0),
+ REG_GPIO_WRITE(GPIO_DEBOUNCE, 0),
+ REG_GPIO_WRITE(GPIO_LS_SYNC, 0),
+
+ /* Toggle the Cypress reset line */
+ REG_GPIO_OR(GPIO_SWPORTA_DR, BIT4),
+ REG_GPIO_AND(GPIO_SWPORTA_DR, ~BIT4),
+ REG_SCRIPT_END
+};