diff --git a/Makefile.inc b/Makefile.inc
index 4f3f54c..6c4a16a 100644
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -52,6 +52,8 @@
 
 romstage-c-ccopts:=-D__PRE_RAM__
 romstage-S-ccopts:=-D__PRE_RAM__
+smm-c-ccopts:=-D__SMM__
+smm-S-ccopts:=-D__SMM__
 
 ramstage-c-deps:=$$(OPTION_TABLE_H)
 romstage-c-deps:=$$(OPTION_TABLE_H)
diff --git a/src/cpu/x86/smm/smiutil.c b/src/cpu/x86/smm/smiutil.c
index 980ea69..cf951f4 100644
--- a/src/cpu/x86/smm/smiutil.c
+++ b/src/cpu/x86/smm/smiutil.c
@@ -21,110 +21,52 @@
 
 #include <arch/io.h>
 #include <arch/romcc_io.h>
-#include <console/console.h>
 #include <cpu/x86/cache.h>
 #include <cpu/x86/smm.h>
 
-/* ********************* smi_util ************************* */
-
-/* Data */
-#define UART_RBR 0x00
-#define UART_TBR 0x00
-
-/* Control */
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/* Status */
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-
-#ifndef CONFIG_TTYS0_BASE
-#define CONFIG_TTYS0_BASE 0x3f8
+#include <console/console.h>
+#include <console/vtxprintf.h>
+#if CONFIG_CONSOLE_SERIAL8250
+#include <uart8250.h>
 #endif
-
-#ifndef CONFIG_TTYS0_BAUD
-#define CONFIG_TTYS0_BAUD 115200
+#if CONFIG_USBDEBUG
+#include <usbdebug.h>
 #endif
-
-#ifndef CONFIG_TTYS0_DIV
-#define CONFIG_TTYS0_DIV	(115200/CONFIG_TTYS0_BAUD)
+#if CONFIG_CONSOLE_NE2K
+#include <console/ne2k.h>
 #endif
 
-/* Line Control Settings */
-#ifndef CONFIG_TTYS0_LCS
-/* Set 8bit, 1 stop bit, no parity */
-#define CONFIG_TTYS0_LCS	0x3
-#endif
-
-#define UART_LCS	CONFIG_TTYS0_LCS
-
-static int uart_can_tx_byte(void)
-{
-	return inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x20;
-}
-
-static void uart_wait_to_tx_byte(void)
-{
-	while(!uart_can_tx_byte())
-	;
-}
-
-static void uart_wait_until_sent(void)
-{
-	while(!(inb(CONFIG_TTYS0_BASE + UART_LSR) & 0x40))
-	;
-}
-
-static void uart_tx_byte(unsigned char data)
-{
-	uart_wait_to_tx_byte();
-	outb(data, CONFIG_TTYS0_BASE + UART_TBR);
-	/* Make certain the data clears the fifos */
-	uart_wait_until_sent();
-}
-
 void console_tx_flush(void)
 {
-	uart_wait_to_tx_byte();
+	// the tx_byte functions take care of the flush.
+	// if not, this should be implemented.
 }
 
 void console_tx_byte(unsigned char byte)
 {
 	if (byte == '\n')
-		uart_tx_byte('\r');
-	uart_tx_byte(byte);
-}
+		console_tx_byte('\r');
 
-#if CONFIG_DEBUG_SMI
-static void uart_init(void)
-{
-	/* disable interrupts */
-	outb(0x0, CONFIG_TTYS0_BASE + UART_IER);
-	/* enable fifo's */
-	outb(0x01, CONFIG_TTYS0_BASE + UART_FCR);
-	/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
-	outb(0x80 | UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
-	outb(CONFIG_TTYS0_DIV & 0xFF,   CONFIG_TTYS0_BASE + UART_DLL);
-	outb((CONFIG_TTYS0_DIV >> 8) & 0xFF,    CONFIG_TTYS0_BASE + UART_DLM);
-	outb(UART_LCS, CONFIG_TTYS0_BASE + UART_LCR);
-}
+#if CONFIG_CONSOLE_SERIAL8250
+	uart8250_tx_byte(CONFIG_TTYS0_BASE, byte);
 #endif
+#if CONFIG_USBDEBUG
+	usbdebug_tx_byte(byte);
+#endif
+#if CONFIG_CONSOLE_NE2K
+	ne2k_append_data(&byte, 1, CONFIG_CONSOLE_NE2K_IO_PORT);
+#endif
+}
 
 void console_init(void)
 {
 #if CONFIG_DEBUG_SMI
 	console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL;
+#if CONFIG_CONSOLE_SERIAL8250
 	uart_init();
+#endif
 #else
 	console_loglevel = 1;
 #endif
 }
 
-/* ********************* smi_util ************************* */
diff --git a/src/lib/Makefile.inc b/src/lib/Makefile.inc
index 307423d..2d7936b 100644
--- a/src/lib/Makefile.inc
+++ b/src/lib/Makefile.inc
@@ -1,5 +1,18 @@
-ramstage-y += clog2.c
-ramstage-y += uart8250.c
+
+
+romstage-y += memset.c
+romstage-y += memcpy.c
+romstage-y += memcmp.c
+romstage-y += cbfs.c
+romstage-y += lzma.c
+#romstage-y += lzmadecode.c
+romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
+romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c
+romstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
+romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
+romstage-$(CONFIG_CONSOLE_NE2K) += compute_ip_checksum.c
+romstage-$(CONFIG_USBDEBUG) += usbdebug.c
+
 ramstage-y += memset.c
 ramstage-y += memcpy.c
 ramstage-y += memcmp.c
@@ -13,27 +26,15 @@
 ramstage-y += lzma.c
 #ramstage-y += lzmadecode.c
 ramstage-y += gcc.c
+ramstage-y += clog2.c
 ramstage-y += cbmem.c
-
-romstage-$(CONFIG_HAVE_ACPI_RESUME) += cbmem.c
-romstage-y += uart8250.c
-romstage-y += memset.c
-romstage-y += memcpy.c
-romstage-y += memcmp.c
-romstage-y += cbfs.c
-romstage-y += lzma.c
-romstage-$(CONFIG_CACHE_AS_RAM) += ramtest.c
-#romstage-y += lzmadecode.c
-romstage-$(CONFIG_CONSOLE_NE2K) += ne2k.c
-romstage-$(CONFIG_CONSOLE_NE2K) += compute_ip_checksum.c
+ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
+ramstage-$(CONFIG_USBDEBUG) += usbdebug.c
+ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
 
 driver-$(CONFIG_CONSOLE_NE2K) += ne2k.c
 
-romstage-$(CONFIG_USBDEBUG) += usbdebug.c
-ramstage-$(CONFIG_USBDEBUG) += usbdebug.c
-
-ramstage-$(CONFIG_BOOTSPLASH) += jpeg.c
-
 smm-y += memcpy.c
+smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
 
 $(obj)/lib/version.ramstage.o : $(obj)/build.h
diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c
index 28989b2..8149b03 100644
--- a/src/lib/uart8250.c
+++ b/src/lib/uart8250.c
@@ -103,10 +103,10 @@
 }
 #endif
 
-#ifdef __PRE_RAM__
+#if defined(__PRE_RAM__) || defined(__SMM__)
 void uart_init(void)
 {
-#if CONFIG_USE_OPTION_TABLE
+#if CONFIG_USE_OPTION_TABLE && !defined(__SMM__)
         static const unsigned char divisor[] = { 1, 2, 3, 6, 12, 24, 48, 96 };
         unsigned ttys0_div, ttys0_index;
         ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0);