AMD SB700 boards: Set Azalia configuration flags
The existing code for setting Azalia configuration assumes that
the configuration bits are contiguous within a single byte and
can be set using a byte copy addressed into the lowest 2-bit
subfield.
The fix in Family 14 defines a union that can be addressed as a
byte to overlay the bit fields. Since the offset of the four
subfields is not necessarily fixed, change the code to initialize
each of the four subfields individually.
Change-Id: I1dff20bb8bd3e1bcd8b4e6b0537e20779d2a3521
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3544
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
diff --git a/src/mainboard/supermicro/h8qgi/sb700_cfg.c b/src/mainboard/supermicro/h8qgi/sb700_cfg.c
index 54c139a..ff2334f 100644
--- a/src/mainboard/supermicro/h8qgi/sb700_cfg.c
+++ b/src/mainboard/supermicro/h8qgi/sb700_cfg.c
@@ -126,7 +126,10 @@
/* Azalia HDA */
sb_config->AzaliaController = AZALIA_CONTROLLER;
sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG;
- sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN;
+ sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN_0;
+ sb_config->AzaliaSdin1 = AZALIA_SDIN_PIN_1;
+ sb_config->AzaliaSdin2 = AZALIA_SDIN_PIN_2;
+ sb_config->AzaliaSdin3 = AZALIA_SDIN_PIN_3;
sb_config->pAzaliaOemCodecTablePtr = NULL;
#ifndef __PRE_RAM__