devicetrees: Remove trailing backslash from multiline values
It's not needed to put a backslash at the end of a line for quoted
multiline values. Thus, remove it.
Change-Id: I1b83d53598ba2adeed853a96d6c2c1a21f01a9f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78576
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb
index 23cbf96..3a75b48 100644
--- a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb
+++ b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb
@@ -29,55 +29,55 @@
#* VrVoltageLimit command not sent.
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
- .vr_config_enable = 1, \
- .psi1threshold = VR_CFG_AMP(20), \
- .psi2threshold = VR_CFG_AMP(5), \
- .psi3threshold = VR_CFG_AMP(1), \
- .psi3enable = 1, \
- .psi4enable = 1, \
- .imon_slope = 0, \
- .imon_offset = 0, \
- .icc_max = 0, \
- .voltage_limit = 0 \
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0,
+ .imon_offset = 0,
+ .icc_max = 0,
+ .voltage_limit = 0
}"
register "domain_vr_config[VR_IA_CORE]" = "{
- .vr_config_enable = 1, \
- .psi1threshold = VR_CFG_AMP(20), \
- .psi2threshold = VR_CFG_AMP(5), \
- .psi3threshold = VR_CFG_AMP(1), \
- .psi3enable = 1, \
- .psi4enable = 1, \
- .imon_slope = 0, \
- .imon_offset = 0, \
- .icc_max = 0, \
- .voltage_limit = 0 \
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0,
+ .imon_offset = 0,
+ .icc_max = 0,
+ .voltage_limit = 0
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
- .vr_config_enable = 1, \
- .psi1threshold = VR_CFG_AMP(20), \
- .psi2threshold = VR_CFG_AMP(5), \
- .psi3threshold = VR_CFG_AMP(1), \
- .psi3enable = 1, \
- .psi4enable = 1, \
- .imon_slope = 0, \
- .imon_offset = 0, \
- .icc_max = 0 ,\
- .voltage_limit = 0 \
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0,
+ .imon_offset = 0,
+ .icc_max = 0,
+ .voltage_limit = 0
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
- .vr_config_enable = 1, \
- .psi1threshold = VR_CFG_AMP(20), \
- .psi2threshold = VR_CFG_AMP(5), \
- .psi3threshold = VR_CFG_AMP(1), \
- .psi3enable = 1, \
- .psi4enable = 1, \
- .imon_slope = 0, \
- .imon_offset = 0, \
- .icc_max = 0, \
- .voltage_limit = 0 \
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0,
+ .imon_offset = 0,
+ .icc_max = 0,
+ .voltage_limit = 0
}"
# Enable Root ports.
@@ -133,18 +133,18 @@
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
- register "SerialIoDevMode" = "{ \
- [PchSerialIoIndexI2C0] = PchSerialIoPci, \
- [PchSerialIoIndexI2C1] = PchSerialIoPci, \
- [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \
- [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \
- [PchSerialIoIndexI2C4] = PchSerialIoPci, \
- [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \
- [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \
- [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
- [PchSerialIoIndexUart0] = PchSerialIoPci, \
- [PchSerialIoIndexUart1] = PchSerialIoDisabled, \
- [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
+ register "SerialIoDevMode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C4] = PchSerialIoPci,
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled,
+ [PchSerialIoIndexSpi0] = PchSerialIoDisabled,
+ [PchSerialIoIndexSpi1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUart0] = PchSerialIoPci,
+ [PchSerialIoIndexUart1] = PchSerialIoDisabled,
+ [PchSerialIoIndexUart2] = PchSerialIoSkipInit,
}"
# Use default SD card detect GPIO configuration