blob: e2b6ceec7fed2fdd026b019730070cdf5795d94f [file] [log] [blame]
chip soc/intel/apollolake
device cpu_cluster 0 on
device lapic 0 on end
end
register "sci_irq" = "SCIS_IRQ10"
# Disable unused clkreq of PCIe root ports
register "pcie_rp0_clkreq_pin" = "3" # PCIe-PCI-Bridge
register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
register "pcie_rp2_clkreq_pin" = "0" # MACPHY
register "pcie_rp3_clkreq_pin" = "1" # MACPHY
register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
# EMMC TX DATA Delay 1
# Refer to EDS-Vol2-22.3.
# [14:8] steps of delay for HS400, each 125ps.
# [6:0] steps of delay for SDR104/HS200, each 125ps.
register "emmc_tx_data_cntl1" = "0x0C16"
# EMMC TX DATA Delay 2
# Refer to EDS-Vol2-22.3.
# [30:24] steps of delay for SDR50, each 125ps.
# [22:16] steps of delay for DDR50, each 125ps.
# [14:8] steps of delay for SDR25/HS50, each 125ps.
# [6:0] steps of delay for SDR12, each 125ps.
register "emmc_tx_data_cntl2" = "0x28162828"
# EMMC RX CMD/DATA Delay 1
# Refer to EDS-Vol2-22.3.
# [30:24] steps of delay for SDR50, each 125ps.
# [22:16] steps of delay for DDR50, each 125ps.
# [14:8] steps of delay for SDR25/HS50, each 125ps.
# [6:0] steps of delay for SDR12, each 125ps.
register "emmc_rx_cmd_data_cntl1" = "0x00181717"
# EMMC RX CMD/DATA Delay 2
# Refer to EDS-Vol2-22.3.
# [17:16] stands for Rx Clock before Output Buffer
# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
# [6:0] steps of delay for HS200, each 125ps.
register "emmc_rx_cmd_data_cntl2" = "0x10008"
# Enable I2C0 for proximity sensor at 100kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_STANDARD
}"
device domain 0 on
device pci 00.0 on end # - Host Bridge
device pci 00.1 off end # - DPTF
device pci 00.2 off end # - NPK
device pci 02.0 on end # - Gen - Display
device pci 03.0 off end # - Iunit
device pci 0d.0 on end # - P2SB
device pci 0d.1 off end # - PMC
device pci 0d.2 on end # - SPI
device pci 0d.3 off end # - Shared SRAM
device pci 0e.0 off end # - Audio
device pci 11.0 on end # - ISH
device pci 12.0 on end # - SATA
device pci 13.0 on end # - RP 2 - PCIe A 0 - MACPHY
device pci 13.1 on end # - RP 3 - PCIe A 1 - MACPHY
device pci 13.2 off end # - RP 4 - PCIe-A 2
device pci 13.3 off end # - RP 5 - PCIe-A 3
device pci 14.0 on end # - RP 0 - PCIe-B 0 - PCIe-PCI-Bridge
device pci 14.1 off end # - RP 1 - PCIe-B 1
device pci 15.0 on end # - XHCI
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
# Enable external RTC chip
chip drivers/i2c/rx6110sa
register "pmon_sampling" = "PMON_SAMPL_256_MS"
register "bks_on" = "0"
register "bks_off" = "1"
register "iocut_en" = "1"
register "set_user_date" = "1"
register "user_year" = "04"
register "user_month" = "07"
register "user_day" = "01"
register "user_weekday" = "4"
device i2c 0x32 on end # RTC RX6110 SA
end
end
device pci 16.1 off end # - I2C 1
device pci 16.2 off end # - I2C 2
device pci 16.3 off end # - I2C 3
device pci 17.0 off end # - I2C 4
device pci 17.1 off end # - I2C 5
device pci 17.2 off end # - I2C 6
device pci 17.3 on end # - I2C 7
device pci 18.0 off end # - UART 0
device pci 18.1 off end # - UART 1
device pci 18.2 off end # - UART 2
device pci 18.3 off end # - UART 3
device pci 19.0 off end # - SPI 0
device pci 19.1 off end # - SPI 1
device pci 19.2 off end # - SPI 2
device pci 1a.0 off end # - PWM
device pci 1b.0 off end # - SDCARD
device pci 1c.0 on end # - eMMC
device pci 1d.0 off end # - UFS
device pci 1e.0 off end # - SDIO
device pci 1f.0 on end # - LPC
device pci 1f.1 on end # - SMBUS
end
end