drivers/intel/mipi_camera: SSDT changes to add PLD
This change updates mipi_camera driver to add PLD section to SSDT.
Change-Id: If65b9cbabca95e9645d8e5023ce7fd78b0625d1e
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42469
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/drivers/intel/mipi_camera/camera.c b/src/drivers/intel/mipi_camera/camera.c
index c4cacce..7c0774d 100644
--- a/src/drivers/intel/mipi_camera/camera.c
+++ b/src/drivers/intel/mipi_camera/camera.c
@@ -14,6 +14,54 @@
#define SENSOR_TYPE_UUID "26257549-9271-4ca4-bb43-c4899d5a4881"
#define DEFAULT_ENDPOINT 0
+static void apply_pld_defaults(struct drivers_intel_mipi_camera_config *config)
+{
+ if (!config->pld.ignore_color)
+ config->pld.ignore_color = 1;
+
+ if (!config->pld.visible)
+ config->pld.visible = 1;
+
+ if (!config->pld.vertical_offset)
+ config->pld.vertical_offset = 0xffff;
+
+ if (!config->pld.horizontal_offset)
+ config->pld.horizontal_offset = 0xffff;
+
+ /*
+ * PLD_PANEL_TOP has a value of zero, so the following will change any instance of
+ * PLD_PANEL_TOP to PLD_PANEL_FRONT unless disable_pld_defaults is set.
+ */
+ if (!config->pld.panel)
+ config->pld.panel = PLD_PANEL_FRONT;
+
+ /*
+ * PLD_HORIZONTAL_POSITION_LEFT has a value of zero, so the following will change any
+ * instance of that value to PLD_HORIZONTAL_POSITION_CENTER unless disable_pld_defaults
+ * is set.
+ */
+ if (!config->pld.horizontal_position)
+ config->pld.horizontal_position = PLD_HORIZONTAL_POSITION_CENTER;
+
+ /*
+ * The desired default for |vertical_position| is PLD_VERTICAL_POSITION_UPPER, which
+ * has a value of zero so no work is needed to set a default. The same applies for
+ * setting |shape| to PLD_SHAPE_ROUND.
+ */
+}
+
+static void camera_generate_pld(const struct device *dev)
+{
+ struct drivers_intel_mipi_camera_config *config = dev->chip_info;
+
+ if (config->use_pld) {
+ if (!config->disable_pld_defaults)
+ apply_pld_defaults(config);
+
+ acpigen_write_pld(&config->pld);
+ }
+}
+
static uint32_t address_for_dev_type(const struct device *dev, uint8_t dev_type)
{
struct drivers_intel_mipi_camera_config *config = dev->chip_info;
@@ -146,6 +194,8 @@
const char *vcm_name = NULL;
struct acpi_dp *lens_focus = NULL;
+ camera_generate_pld(dev);
+
camera_fill_sensor_defaults(config);
/* _DSM */