sb/intel/bd82x6x: Put temp BAR in a define
We use a temporary BAR value to program the thermal settings. To make
this more obvious, factor it out.
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: Icda6e4100d954fe28d2624270b5d7ab7ed155e32
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/src/southbridge/intel/bd82x6x/early_thermal.c b/src/southbridge/intel/bd82x6x/early_thermal.c
index e73f3a5..60c08d1 100644
--- a/src/southbridge/intel/bd82x6x/early_thermal.c
+++ b/src/southbridge/intel/bd82x6x/early_thermal.c
@@ -22,6 +22,9 @@
return read16((u16 *)addr);
}
+/* Temporary address for the thermal BAR */
+#define TBARB_TEMP 0x40000000
+
/* Early thermal init, must be done prior to giving ME its memory
which is done at the end of raminit. */
void early_thermal_init(void)
@@ -32,31 +35,31 @@
dev = PCI_DEV(0x0, 0x1f, 0x6);
/* Program address for temporary BAR. */
- pci_write_config32(dev, 0x40, 0x40000000);
+ pci_write_config32(dev, 0x40, TBARB_TEMP);
pci_write_config32(dev, 0x44, 0x0);
/* Activate temporary BAR. */
pci_write_config32(dev, 0x40, pci_read_config32(dev, 0x40) | 5);
+ write16p(TBARB_TEMP + 0x04, 0x3a2b);
- write16p(0x40000004, 0x3a2b);
- write8p(0x4000000c, 0xff);
- write8p(0x4000000d, 0x00);
- write8p(0x4000000e, 0x40);
- write8p(0x40000082, 0x00);
- write8p(0x40000001, 0xba);
+ write8p(TBARB_TEMP + 0x0c, 0xff);
+ write8p(TBARB_TEMP + 0x0d, 0x00);
+ write8p(TBARB_TEMP + 0x0e, 0x40);
+ write8p(TBARB_TEMP + 0x82, 0x00);
+ write8p(TBARB_TEMP + 0x01, 0xba);
/* Perform init. */
/* Configure TJmax. */
msr = rdmsr(MSR_TEMPERATURE_TARGET);
- write16p(0x40000012, ((msr.lo >> 16) & 0xff) << 6);
+ write16p(TBARB_TEMP + 0x12, ((msr.lo >> 16) & 0xff) << 6);
/* Northbridge temperature slope and offset */
- write16p(0x40000016, 0x808c);
+ write16p(TBARB_TEMP + 0x16, 0x808c);
- write16p(0x40000014, 0xde87);
+ write16p(TBARB_TEMP + 0x14, 0xde87);
/* Enable thermal data reporting, processor, PCH and northbridge */
- write16p(0x4000001a, (read16p(0x4000001a) & ~0xf) | 0x10f0);
+ write16p(TBARB_TEMP + 0x1a, (read16p(TBARB_TEMP + 0x1a) & ~0xf) | 0x10f0);
/* Disable temporary BAR */
pci_write_config32(dev, 0x40, pci_read_config32(dev, 0x40) & ~1);