mb/google/poppy: Set touchpad/touchscreen IRQs to LEVEL vs EDGE
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: Iee01dac943b6c2955f7af42ce0e9395fc609682f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70920
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb
index 12ac721..9fc34d0 100644
--- a/src/mainboard/google/poppy/variants/nami/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb
@@ -280,7 +280,7 @@
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B3)"
register "reset_delay_ms" = "20"
@@ -296,7 +296,7 @@
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B3)"
register "reset_delay_ms" = "1"
@@ -341,7 +341,7 @@
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E3_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E3_IRQ)"
register "wake" = "GPE0_DW2_16"
register "detect" = "1"
device i2c 15 on end