libpayload: Make Kconfig bools use IS_ENABLED()
This will make the code work with the different styles
of Kconfig (emit unset bools vs don't emit unset bools)
Roughly, the patch does this, and a little bit of fixing up:
perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]`
perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]`
Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10711
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
diff --git a/payloads/libpayload/drivers/usb/usbinit.c b/payloads/libpayload/drivers/usb/usbinit.c
index 7a5828d..721fde8 100644
--- a/payloads/libpayload/drivers/usb/usbinit.c
+++ b/payloads/libpayload/drivers/usb/usbinit.c
@@ -37,7 +37,7 @@
#include "dwc2.h"
#include <usb/usbdisk.h>
-#ifdef CONFIG_LP_USB_PCI
+#if IS_ENABLED(CONFIG_LP_USB_PCI)
/**
* Initializes USB controller attached to PCI
*
@@ -72,7 +72,7 @@
pciid >> 16, pciid & 0xFFFF, func);
switch (prog_if) {
case 0x00:
-#ifdef CONFIG_LP_USB_UHCI
+#if IS_ENABLED(CONFIG_LP_USB_UHCI)
usb_debug("UHCI controller\n");
uhci_pci_init (pci_device);
#else
@@ -81,7 +81,7 @@
break;
case 0x10:
-#ifdef CONFIG_LP_USB_OHCI
+#if IS_ENABLED(CONFIG_LP_USB_OHCI)
usb_debug("OHCI controller\n");
ohci_pci_init(pci_device);
#else
@@ -90,7 +90,7 @@
break;
case 0x20:
-#ifdef CONFIG_LP_USB_EHCI
+#if IS_ENABLED(CONFIG_LP_USB_EHCI)
usb_debug("EHCI controller\n");
ehci_pci_init(pci_device);
#else
@@ -99,7 +99,7 @@
break;
case 0x30:
-#ifdef CONFIG_LP_USB_XHCI
+#if IS_ENABLED(CONFIG_LP_USB_XHCI)
usb_debug("xHCI controller\n");
xhci_pci_init(pci_device);
#else
@@ -166,7 +166,7 @@
*/
int usb_initialize(void)
{
-#ifdef CONFIG_LP_USB_PCI
+#if IS_ENABLED(CONFIG_LP_USB_PCI)
usb_scan_pci_bus(0);
#endif
return 0;
@@ -175,19 +175,19 @@
hci_t *usb_add_mmio_hc(hc_type type, void *bar)
{
switch (type) {
-#ifdef CONFIG_LP_USB_OHCI
+#if IS_ENABLED(CONFIG_LP_USB_OHCI)
case OHCI:
return ohci_init((unsigned long)bar);
#endif
-#ifdef CONFIG_LP_USB_EHCI
+#if IS_ENABLED(CONFIG_LP_USB_EHCI)
case EHCI:
return ehci_init((unsigned long)bar);
#endif
-#ifdef CONFIG_LP_USB_DWC2
+#if IS_ENABLED(CONFIG_LP_USB_DWC2)
case DWC2:
return dwc2_init(bar);
#endif
-#ifdef CONFIG_LP_USB_XHCI
+#if IS_ENABLED(CONFIG_LP_USB_XHCI)
case XHCI:
return xhci_init((unsigned long)bar);
#endif