/** @file
  EFI_SCSI_IO_PROTOCOL as defined in UEFI 2.0.
  This protocol is used by code, typically drivers, running in the EFI boot
  services environment to access SCSI devices. In particular, functions for
  managing devices on SCSI buses are defined here.

  Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef __EFI_SCSI_IO_PROTOCOL_H__
#define __EFI_SCSI_IO_PROTOCOL_H__

#define EFI_SCSI_IO_PROTOCOL_GUID \
  { \
    0x932f47e6, 0x2362, 0x4002, {0x80, 0x3e, 0x3c, 0xd5, 0x4b, 0x13, 0x8f, 0x85 } \
  }

///
/// Forward reference for pure ANSI compatability
///
typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;

//
// SCSI Device type information, defined in the SCSI Primary Commands standard (e.g., SPC-4)
//
#define EFI_SCSI_IO_TYPE_DISK           0x00                           ///< Disk device
#define EFI_SCSI_IO_TYPE_TAPE           0x01                           ///< Tape device
#define EFI_SCSI_IO_TYPE_PRINTER        0x02                           ///< Printer
#define EFI_SCSI_IO_TYPE_PROCESSOR      0x03                           ///< Processor
#define EFI_SCSI_IO_TYPE_WORM           0x04                           ///< Write-once read-multiple
#define EFI_SCSI_IO_TYPE_CDROM          0x05                           ///< CD or DVD device
#define EFI_SCSI_IO_TYPE_SCANNER        0x06                           ///< Scanner device
#define EFI_SCSI_IO_TYPE_OPTICAL        0x07                           ///< Optical memory device
#define EFI_SCSI_IO_TYPE_MEDIUMCHANGER  0x08                           ///< Medium Changer device
#define EFI_SCSI_IO_TYPE_COMMUNICATION  0x09                           ///< Communications device
#define MFI_SCSI_IO_TYPE_A              0x0A                           ///< Obsolete
#define MFI_SCSI_IO_TYPE_B              0x0B                           ///< Obsolete
#define MFI_SCSI_IO_TYPE_RAID           0x0C                           ///< Storage array controller device (e.g., RAID)
#define MFI_SCSI_IO_TYPE_SES            0x0D                           ///< Enclosure services device
#define MFI_SCSI_IO_TYPE_RBC            0x0E                           ///< Simplified direct-access device (e.g., magnetic disk)
#define MFI_SCSI_IO_TYPE_OCRW           0x0F                           ///< Optical card reader/writer device
#define MFI_SCSI_IO_TYPE_BRIDGE         0x10                           ///< Bridge Controller Commands
#define MFI_SCSI_IO_TYPE_OSD            0x11                           ///< Object-based Storage Device
#define EFI_SCSI_IO_TYPE_RESERVED_LOW   0x12                           ///< Reserved (low)
#define EFI_SCSI_IO_TYPE_RESERVED_HIGH  0x1E                           ///< Reserved (high)
#define EFI_SCSI_IO_TYPE_UNKNOWN        0x1F                           ///< Unknown no device type

//
// SCSI Data Direction definition
//
#define EFI_SCSI_IO_DATA_DIRECTION_READ           0
#define EFI_SCSI_IO_DATA_DIRECTION_WRITE          1
#define EFI_SCSI_IO_DATA_DIRECTION_BIDIRECTIONAL  2

//
// SCSI Host Adapter Status definition
//
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OK                     0x00
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND        0x09    ///< timeout when processing the command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_TIMEOUT                0x0b    ///< timeout when waiting for the command processing
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_MESSAGE_REJECT         0x0d    ///< a message reject was received when processing command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_RESET              0x0e    ///< a bus reset was detected
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PARITY_ERROR           0x0f
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED   0x10    ///< the adapter failed in issuing request sense command
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT      0x11    ///< selection timeout
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN  0x12    ///< data overrun or data underrun
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_BUS_FREE               0x13    ///< Unexepected bus free
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_PHASE_ERROR            0x14    ///< Target bus phase sequence failure
#define EFI_SCSI_IO_STATUS_HOST_ADAPTER_OTHER                  0x7f

//
// SCSI Target Status definition
//
#define EFI_SCSI_IO_STATUS_TARGET_GOOD                        0x00
#define EFI_SCSI_IO_STATUS_TARGET_CHECK_CONDITION             0x02     ///< check condition
#define EFI_SCSI_IO_STATUS_TARGET_CONDITION_MET               0x04     ///< condition met
#define EFI_SCSI_IO_STATUS_TARGET_BUSY                        0x08     ///< busy
#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE                0x10     ///< intermediate
#define EFI_SCSI_IO_STATUS_TARGET_INTERMEDIATE_CONDITION_MET  0x14     ///< intermediate-condition met
#define EFI_SCSI_IO_STATUS_TARGET_RESERVATION_CONFLICT        0x18     ///< reservation conflict
#define EFI_SCSI_IO_STATUS_TARGET_COMMOND_TERMINATED          0x22     ///< command terminated
#define EFI_SCSI_IO_STATUS_TARGET_QUEUE_FULL                  0x28     ///< queue full

typedef struct {
  ///
  /// The timeout, in 100 ns units, to use for the execution of this SCSI
  /// Request Packet. A Timeout value of 0 means that this function
  /// will wait indefinitely for the SCSI Request Packet to execute. If
  /// Timeout is greater than zero, then this function will return
  /// EFI_TIMEOUT if the time required to execute the SCSI Request
  /// Packet is greater than Timeout.
  ///
  UINT64    Timeout;
  ///
  /// A pointer to the data buffer to transfer between the SCSI
  /// controller and the SCSI device for SCSI READ command
  ///
  VOID      *InDataBuffer;
  ///
  /// A pointer to the data buffer to transfer between the SCSI
  /// controller and the SCSI device for SCSI WRITE command.
  ///
  VOID      *OutDataBuffer;
  ///
  /// A pointer to the sense data that was generated by the execution of
  /// the SCSI Request Packet.
  ///
  VOID      *SenseData;
  ///
  /// A pointer to buffer that contains the Command Data Block to
  /// send to the SCSI device.
  ///
  VOID      *Cdb;
  ///
  /// On Input, the size, in bytes, of InDataBuffer. On output, the
  /// number of bytes transferred between the SCSI controller and the SCSI device.
  ///
  UINT32    InTransferLength;
  ///
  /// On Input, the size, in bytes of OutDataBuffer. On Output, the
  /// Number of bytes transferred between SCSI Controller and the SCSI device.
  ///
  UINT32    OutTransferLength;
  ///
  /// The length, in bytes, of the buffer Cdb. The standard values are
  /// 6, 10, 12, and 16, but other values are possible if a variable length CDB is used.
  ///
  UINT8     CdbLength;
  ///
  /// The direction of the data transfer. 0 for reads, 1 for writes. A
  /// value of 2 is Reserved for Bi-Directional SCSI commands.
  ///
  UINT8     DataDirection;
  ///
  /// The status of the SCSI Host Controller that produces the SCSI
  /// bus where the SCSI device attached when the SCSI Request
  /// Packet was executed on the SCSI Controller.
  ///
  UINT8     HostAdapterStatus;
  ///
  /// The status returned by the SCSI device when the SCSI Request
  /// Packet was executed.
  ///
  UINT8     TargetStatus;
  ///
  /// On input, the length in bytes of the SenseData buffer. On
  /// output, the number of bytes written to the SenseData buffer.
  ///
  UINT8     SenseDataLength;
} EFI_SCSI_IO_SCSI_REQUEST_PACKET;

/**
  Retrieves the device type information of the SCSI Controller.

  @param  This       Protocol instance pointer.
  @param  DeviceType A pointer to the device type information
                     retrieved from the SCSI Controller.

  @retval EFI_SUCCESS           Retrieved the device type information successfully.
  @retval EFI_INVALID_PARAMETER The DeviceType is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE)(
  IN  EFI_SCSI_IO_PROTOCOL            *This,
  OUT UINT8                           *DeviceType
  );

/**
  Retrieves the device location in the SCSI channel.

  @param  This   Protocol instance pointer.
  @param  Target A pointer to the Target ID of a SCSI device
                 on the SCSI channel.
  @param  Lun    A pointer to the LUN of the SCSI device on
                 the SCSI channel.

  @retval EFI_SUCCESS           Retrieves the device location successfully.
  @retval EFI_INVALID_PARAMETER The Target or Lun is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION)(
  IN EFI_SCSI_IO_PROTOCOL           *This,
  IN OUT UINT8                      **Target,
  OUT UINT64                        *Lun
  );

/**
  Resets the SCSI Bus that the SCSI Controller is attached to.

  @param  This Protocol instance pointer.

  @retval EFI_SUCCESS      The SCSI bus is reset successfully.
  @retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
  @retval EFI_UNSUPPORTED  The bus reset operation is not supported by the
                           SCSI Host Controller.
  @retval EFI_TIMEOUT      A timeout occurred while attempting to reset
                            the SCSI bus.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_BUS)(
  IN EFI_SCSI_IO_PROTOCOL     *This
  );

/**
  Resets the SCSI Controller that the device handle specifies.

  @param  This Protocol instance pointer.

  @retval EFI_SUCCESS      Reset the SCSI controller successfully.
  @retval EFI_DEVICE_ERROR Errors were encountered when resetting the
                           SCSI Controller.
  @retval EFI_UNSUPPORTED  The SCSI bus does not support a device
                           reset operation.
  @retval EFI_TIMEOUT      A timeout occurred while attempting to
                           reset the SCSI Controller.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_RESET_DEVICE)(
  IN EFI_SCSI_IO_PROTOCOL     *This
  );

/**
  Sends a SCSI Request Packet to the SCSI Controller for execution.

  @param  This    Protocol instance pointer.
  @param  Packet  The SCSI request packet to send to the SCSI
                  Controller specified by the device handle.
  @param  Event   If the SCSI bus to which the SCSI device is attached
                  does not support non-blocking I/O, then Event is
                  ignored, and blocking I/O is performed.
                  If Event is NULL, then blocking I/O is performed.
                  If Event is not NULL and non-blocking I/O is
                  supported, then non-blocking I/O is performed,
                  and Event will be signaled when the SCSI Request
                  Packet completes.

  @retval EFI_SUCCESS               The SCSI Request Packet was sent by the host
                                    successfully, and TransferLength bytes were
                                    transferred to/from DataBuffer. See
                                    HostAdapterStatus, TargetStatus,
                                    SenseDataLength, and SenseData in that order
                                    for additional status information.
  @retval EFI_BAD_BUFFER_SIZE       The SCSI Request Packet was executed,
                                    but the entire DataBuffer could not be transferred.
                                    The actual number of bytes transferred is returned
                                    in TransferLength. See HostAdapterStatus,
                                    TargetStatus, SenseDataLength, and SenseData in
                                    that order for additional status information.
  @retval EFI_NOT_READY             The SCSI Request Packet could not be sent because
                                    there are too many SCSI Command Packets already
                                    queued.The caller may retry again later.
  @retval EFI_DEVICE_ERROR          A device error occurred while attempting to send
                                    the SCSI Request Packet. See HostAdapterStatus,
                                    TargetStatus, SenseDataLength, and SenseData in
                                    that order for additional status information.
  @retval EFI_INVALID_PARAMETER     The contents of CommandPacket are invalid.
                                    The SCSI Request Packet was not sent, so no
                                    additional status information is available.
  @retval EFI_UNSUPPORTED           The command described by the SCSI Request Packet
                                    is not supported by the SCSI initiator(i.e., SCSI
                                    Host Controller). The SCSI Request Packet was not
                                    sent, so no additional status information is
                                    available.
  @retval EFI_TIMEOUT               A timeout occurred while waiting for the SCSI
                                    Request Packet to execute. See HostAdapterStatus,
                                    TargetStatus, SenseDataLength, and SenseData in
                                    that order for additional status information.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_COMMAND)(
  IN EFI_SCSI_IO_PROTOCOL                   *This,
  IN OUT  EFI_SCSI_IO_SCSI_REQUEST_PACKET   *Packet,
  IN EFI_EVENT                              Event  OPTIONAL
  );

///
/// Provides services to manage and communicate with SCSI devices.
///
struct _EFI_SCSI_IO_PROTOCOL {
  EFI_SCSI_IO_PROTOCOL_GET_DEVICE_TYPE        GetDeviceType;
  EFI_SCSI_IO_PROTOCOL_GET_DEVICE_LOCATION    GetDeviceLocation;
  EFI_SCSI_IO_PROTOCOL_RESET_BUS              ResetBus;
  EFI_SCSI_IO_PROTOCOL_RESET_DEVICE           ResetDevice;
  EFI_SCSI_IO_PROTOCOL_EXEC_SCSI_COMMAND      ExecuteScsiCommand;

  ///
  /// Supplies the alignment requirement for any buffer used in a data transfer.
  /// IoAlign values of 0 and 1 mean that the buffer can be placed anywhere in memory.
  /// Otherwise, IoAlign must be a power of 2, and the requirement is that the
  /// start address of a buffer must be evenly divisible by IoAlign with no remainder.
  ///
  UINT32                                      IoAlign;
};

extern EFI_GUID  gEfiScsiIoProtocolGuid;

#endif