| ####################################################### |
| # |
| # Main options file for LinuxBIOS |
| # |
| # Each option used by a part must be defined in |
| # this file. The format for options is: |
| # |
| # define <name> |
| # default <expr> | {<expr>} | "<string>" | none |
| # format "<string>" |
| # export always | used | never |
| # comment "<string>" |
| # end |
| # |
| # where |
| # |
| # <name> is the name of the option |
| # <expr> is a numeric expression |
| # <string> is a string |
| # |
| # Either a default value or 'default none' must |
| # be specified for every option. An option |
| # specified as 'default none' will not be exported |
| # (i.e. will remain undefined) unless it has |
| # been assigned a value. |
| # |
| # Option values can be an immediate expression that |
| # evaluates to a numeric value, a delayed expression |
| # (surrounded by curley braces), or a string |
| # (surrounded by double quotes.) |
| # |
| # Immediate expressions are evaluated at the time an |
| # option is defined or set and the numeric result |
| # becomes the value of the option. |
| # |
| # Delayed expression are evaluated at the time the |
| # option is used, either in another expression or |
| # when being exported. |
| # |
| # String values will have the double quotes removed |
| # automatically. |
| # |
| # Format strings determine the print format that is |
| # used when exporting options. The default format |
| # is "%s" for strings and "%d" for numbers. |
| # |
| # Exported options generate entries in the |
| # Makefile.settings file. Options can be always |
| # exported, exported only if used, or never exported. |
| # |
| # A comment string must be supplied for every option. |
| # |
| ####################################################### |
| |
| ############################################### |
| # Architecture options |
| ############################################### |
| |
| define ARCH |
| default "i386" |
| export always |
| comment "Default architecture is i386, options are alpha and ppc" |
| end |
| define HAVE_MOVNTI |
| default 0 |
| export always |
| comment "This cpu supports the MOVNTI directive" |
| end |
| |
| ############################################### |
| # Build options |
| ############################################### |
| |
| define CROSS_COMPILE |
| default "" |
| export always |
| comment "Cross compiler prefix" |
| end |
| define CC |
| default "$(CROSS_COMPILE)gcc" |
| export always |
| comment "Target C Compiler" |
| end |
| define HOSTCC |
| default "gcc" |
| export always |
| comment "Host C Compiler" |
| end |
| define CPU_OPT |
| default none |
| export used |
| comment "Additional per-cpu CFLAGS" |
| end |
| define OBJCOPY |
| default "$(CROSS_COMPILE)objcopy --gap-fill 0xff" |
| export always |
| comment "Objcopy command" |
| end |
| define LINUXBIOS_VERSION |
| default "2.0.0" |
| export always |
| format "\"%s\"" |
| comment "LinuxBIOS version" |
| end |
| define LINUXBIOS_EXTRA_VERSION |
| default "" |
| export used |
| format "\"%s\"" |
| comment "LinuxBIOS extra version" |
| end |
| define LINUXBIOS_BUILD |
| default "$(shell date)" |
| export always |
| format "\"%s\"" |
| comment "Build date" |
| end |
| define LINUXBIOS_COMPILE_TIME |
| default "$(shell date +%T)" |
| export always |
| format "\"%s\"" |
| comment "Build time" |
| end |
| define LINUXBIOS_COMPILE_BY |
| default "$(shell whoami)" |
| export always |
| format "\"%s\"" |
| comment "Who build this image" |
| end |
| define LINUXBIOS_COMPILE_HOST |
| default "$(shell hostname)" |
| export always |
| format "\"%s\"" |
| comment "Build host" |
| end |
| |
| define LINUXBIOS_COMPILE_DOMAIN |
| default "$(shell dnsdomainname)" |
| export always |
| format "\"%s\"" |
| comment "Build domain name" |
| end |
| define LINUXBIOS_COMPILER |
| default "$(shell $(CC) $(CFLAGS) -v 2>&1 | tail -n 1)" |
| export always |
| format "\"%s\"" |
| comment "Build compiler" |
| end |
| define LINUXBIOS_LINKER |
| default "$(shell $(CC) -Wl,--version 2>&1 | grep version | tail -n 1)" |
| export always |
| format "\"%s\"" |
| comment "Build linker" |
| end |
| define LINUXBIOS_ASSEMBLER |
| default "$(shell touch dummy.s ; $(CC) -c -Wa,-v dummy.s 2>&1; rm -f dummy.s dummy.o )" |
| export always |
| format "\"%s\"" |
| comment "Build assembler" |
| end |
| define CONFIG_CHIP_CONFIGURE |
| default 0 |
| export used |
| comment "Use new chip_configure method for configuring (non-pci) devices" |
| end |
| define CONFIG_USE_INIT |
| default 0 |
| export always |
| comment "Use stage 1 initialization code" |
| end |
| |
| ############################################### |
| # ROM image options |
| ############################################### |
| |
| define HAVE_FALLBACK_BOOT |
| format "%d" |
| default 0 |
| export always |
| comment "Set if fallback booting required" |
| end |
| define HAVE_FAILOVER_BOOT |
| format "%d" |
| default 0 |
| export always |
| comment "Set if failover booting required" |
| end |
| define USE_FALLBACK_IMAGE |
| format "%d" |
| default 0 |
| export used |
| comment "Set to build a fallback image" |
| end |
| define USE_FAILOVER_IMAGE |
| format "%d" |
| default 0 |
| export used |
| comment "Set to build a failover image" |
| end |
| define FALLBACK_SIZE |
| default 65536 |
| format "0x%x" |
| export used |
| comment "Default fallback image size" |
| end |
| define FAILOVER_SIZE |
| default 0 |
| format "0x%x" |
| export used |
| comment "Default failover image size" |
| end |
| define ROM_SIZE |
| default none |
| format "0x%x" |
| export used |
| comment "Size of your ROM" |
| end |
| define ROM_IMAGE_SIZE |
| default 65535 |
| format "0x%x" |
| export always |
| comment "Default image size" |
| end |
| define ROM_SECTION_SIZE |
| default {FALLBACK_SIZE} |
| format "0x%x" |
| export used |
| comment "Default rom section size" |
| end |
| define ROM_SECTION_OFFSET |
| default {ROM_SIZE - FALLBACK_SIZE} |
| format "0x%x" |
| export used |
| comment "Default rom section offset" |
| end |
| define PAYLOAD_SIZE |
| default {ROM_SECTION_SIZE - ROM_IMAGE_SIZE} |
| format "0x%x" |
| export always |
| comment "Default payload size" |
| end |
| define _ROMBASE |
| default {PAYLOAD_SIZE} |
| format "0x%x" |
| export always |
| comment "Base address of LinuxBIOS in ROM" |
| end |
| define _ROMSTART |
| default none |
| format "0x%x" |
| export used |
| comment "Start address of LinuxBIOS in ROM" |
| end |
| define _RESET |
| default {_ROMBASE} |
| format "0x%x" |
| export always |
| comment "Hardware reset vector address" |
| end |
| define _EXCEPTION_VECTORS |
| default {_ROMBASE+0x100} |
| format "0x%x" |
| export always |
| comment "Address of exception vector table" |
| end |
| define STACK_SIZE |
| default 0x2000 |
| format "0x%x" |
| export always |
| comment "Default stack size" |
| end |
| define HEAP_SIZE |
| default 0x2000 |
| format "0x%x" |
| export always |
| comment "Default heap size" |
| end |
| define _RAMBASE |
| default none |
| format "0x%x" |
| export always |
| comment "Base address of LinuxBIOS in RAM" |
| end |
| define _RAMSTART |
| default none |
| format "0x%x" |
| export used |
| comment "Start address of LinuxBIOS in RAM" |
| end |
| define USE_DCACHE_RAM |
| default 0 |
| export always |
| comment "Use data cache as temporary RAM if possible" |
| end |
| define DCACHE_RAM_BASE |
| default 0xc0000 |
| format "0x%x" |
| export always |
| comment "Base address of data cache when using it for temporary RAM" |
| end |
| define DCACHE_RAM_SIZE |
| default 0x1000 |
| format "0x%x" |
| export always |
| comment "Size of data cache when using it for temporary RAM" |
| end |
| define DCACHE_RAM_GLOBAL_VAR_SIZE |
| default 0 |
| format "0x%x" |
| export always |
| comment "Size of region that for global variable of cache as ram stage" |
| end |
| define CONFIG_AP_CODE_IN_CAR |
| default 0 |
| export always |
| comment "will copy linuxbios_apc to AP cache ane execute in AP" |
| end |
| define MEM_TRAIN_SEQ |
| default 0 |
| export always |
| comment "0: three for in bsp, 1: on every core0, 2: one for on bsp" |
| end |
| define WAIT_BEFORE_CPUS_INIT |
| default 0 |
| export always |
| comment "execute cpus_ready_for_init if it is set to 1" |
| end |
| define XIP_ROM_BASE |
| default 0 |
| format "0x%x" |
| export used |
| comment "Start address of area to cache during LinuxBIOS execution directly from ROM" |
| end |
| define XIP_ROM_SIZE |
| default 0 |
| format "0x%x" |
| export used |
| comment "Size of area to cache during LinuxBIOS execution directly from ROM" |
| end |
| define CONFIG_COMPRESS |
| default 1 |
| export always |
| comment "Set for compressed image" |
| end |
| define CONFIG_UNCOMPRESSED |
| format "%d" |
| default {!CONFIG_COMPRESS} |
| export always |
| comment "Set for uncompressed image" |
| end |
| define CONFIG_LB_MEM_TOPK |
| format "%d" |
| default 2048 |
| export always |
| comment "Kilobytes of memory to initialized before executing code from RAM" |
| end |
| define HAVE_OPTION_TABLE |
| default 0 |
| export always |
| comment "Export CMOS option table" |
| end |
| define USE_OPTION_TABLE |
| format "%d" |
| default {HAVE_OPTION_TABLE && !USE_FALLBACK_IMAGE} |
| export always |
| comment "Use option table" |
| end |
| |
| ############################################### |
| # CMOS variable options |
| ############################################### |
| define LB_CKS_RANGE_START |
| default 49 |
| format "%d" |
| export always |
| comment "First CMOS byte to use for LinuxBIOS options" |
| end |
| define LB_CKS_RANGE_END |
| default 125 |
| format "%d" |
| export always |
| comment "Last CMOS byte to use for LinuxBIOS options" |
| end |
| define LB_CKS_LOC |
| default 126 |
| format "%d" |
| export always |
| comment "Pair of bytes to use for CMOS checksum" |
| end |
| |
| |
| ############################################### |
| # Build targets |
| ############################################### |
| |
| define CRT0 |
| default "$(TOP)/src/arch/$(ARCH)/init/crt0.S.lb" |
| export always |
| comment "Main initialization target" |
| end |
| |
| ############################################### |
| # Debugging/Logging options |
| ############################################### |
| |
| define DEBUG |
| default 1 |
| export always |
| comment "Enable debugging code" |
| end |
| define CONFIG_CONSOLE_VGA |
| default 0 |
| export always |
| comment "Log messages to VGA" |
| end |
| define CONFIG_CONSOLE_VGA_MULTI |
| default 0 |
| export always |
| comment "Multi VGA console" |
| end |
| define CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST |
| default 0 |
| export always |
| comment "Use onboard VGA instead of add on VGA card" |
| end |
| define CONFIG_CONSOLE_BTEXT |
| default 0 |
| export always |
| comment "Log messages to btext fb console" |
| end |
| define CONFIG_CONSOLE_LOGBUF |
| default 0 |
| export always |
| comment "Log messages to buffer" |
| end |
| define CONFIG_CONSOLE_SROM |
| default 0 |
| export always |
| comment "Log messages to SROM console" |
| end |
| define CONFIG_CONSOLE_SERIAL8250 |
| default 0 |
| export always |
| comment "Log messages to 8250 uart based serial console" |
| end |
| define DEFAULT_CONSOLE_LOGLEVEL |
| default 7 |
| export always |
| comment "Console will log at this level unless changed" |
| end |
| define MAXIMUM_CONSOLE_LOGLEVEL |
| default 8 |
| export always |
| comment "Error messages up to this level can be printed" |
| end |
| define CONFIG_SERIAL_POST |
| default 0 |
| export always |
| comment "Enable SERIAL POST codes" |
| end |
| define NO_POST |
| default none |
| export used |
| comment "Disable POST codes" |
| end |
| define TTYS0_BASE |
| default 0x3f8 |
| format "0x%x" |
| export always |
| comment "Base address for 8250 uart for the serial console" |
| end |
| define TTYS0_BAUD |
| default 115200 |
| export always |
| comment "Default baud rate for serial console" |
| end |
| define TTYS0_DIV |
| default none |
| format "%d" |
| export used |
| comment "Allow UART divisor to be set explicitly" |
| end |
| define TTYS0_LCS |
| default 0x3 |
| format "0x%x" |
| export always |
| comment "Default flow control settings for the 8250 serial console uart" |
| end |
| |
| define CONFIG_USE_PRINTK_IN_CAR |
| default 0 |
| export always |
| comment "use printk instead of print in CAR stage code" |
| end |
| |
| |
| ############################################### |
| # Mainboard options |
| ############################################### |
| |
| define MAINBOARD |
| default "Mainboard_not_set" |
| export always |
| comment "Mainboard name" |
| end |
| define MAINBOARD_PART_NUMBER |
| default "Part_number_not_set" |
| export always |
| format "\"%s\"" |
| comment "Part number of mainboard" |
| end |
| define MAINBOARD_VENDOR |
| default "Vendor_not_set" |
| export always |
| format "\"%s\"" |
| comment "Vendor of mainboard" |
| end |
| define MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID |
| default 0 |
| export always |
| comment "PCI Vendor ID of mainboard manufacturer" |
| end |
| define MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID |
| default 0 |
| format "0x%x" |
| export always |
| comment "PCI susbsystem device id assigned my mainboard manufacturer" |
| end |
| define MAINBOARD_POWER_ON_AFTER_POWER_FAIL |
| default none |
| export used |
| comment "Default power on after power fail setting" |
| end |
| define CONFIG_SYS_CLK_FREQ |
| default none |
| export used |
| comment "System clock frequency in MHz" |
| end |
| define CONFIG_MAX_PCI_BUSES |
| default 255 |
| export always |
| comment "Maximum number of PCI buses to search for devices" |
| end |
| ############################################### |
| # SMP options |
| ############################################### |
| |
| define CONFIG_SMP |
| default 0 |
| export always |
| comment "Define if we support SMP" |
| end |
| define CONFIG_MAX_CPUS |
| default 1 |
| export always |
| comment "Maximum CPU count for this machine" |
| end |
| define CONFIG_MAX_PHYSICAL_CPUS |
| default 1 |
| export always |
| comment "Maximum physical CPU count for this machine" |
| end |
| define CONFIG_LOGICAL_CPUS |
| default 0 |
| export always |
| comment "Should multiple cpus per die be enabled?" |
| end |
| define HAVE_MP_TABLE |
| default none |
| export used |
| comment "Define to build an MP table" |
| end |
| define SERIAL_CPU_INIT |
| default 1 |
| export always |
| comment "Serialize CPU init" |
| end |
| define APIC_ID_OFFSET |
| default 0 |
| export always |
| comment "We need to share this value between cache_as_ram_auto.c and northbridge.c" |
| end |
| define ENABLE_APIC_EXT_ID |
| default 0 |
| export always |
| comment "Enable APIC ext id mode 8 bit" |
| end |
| define LIFT_BSP_APIC_ID |
| default 0 |
| export always |
| comment "decide if we lift bsp apic id while ap apic id" |
| end |
| ############################################### |
| # Boot options |
| ############################################### |
| |
| define CONFIG_IDE_STREAM |
| default 0 |
| export always |
| comment "Boot from IDE device" |
| end |
| define CONFIG_ROM_STREAM |
| default 0 |
| export always |
| comment "Boot image is located in ROM" |
| end |
| define CONFIG_ROM_STREAM_START |
| default {0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1} |
| format "0x%x" |
| export always |
| comment "ROM stream start location" |
| end |
| define CONFIG_COMPRESSED_PAYLOAD_NRV2B |
| default 0 |
| export always |
| comment "NRV2B compressed boot image is located in ROM" |
| end |
| define CONFIG_COMPRESSED_PAYLOAD_LZMA |
| default 0 |
| export always |
| comment "LZMA compressed boot image is located in ROM" |
| end |
| define CONFIG_PRECOMPRESSED_PAYLOAD |
| default 0 |
| export always |
| comment "boot image is already compressed" |
| end |
| define CONFIG_SERIAL_STREAM |
| default 0 |
| export always |
| comment "Download boot image from serial port" |
| end |
| define CONFIG_FS_STREAM |
| default 0 |
| export always |
| comment "Boot from a filesystem" |
| end |
| define CONFIG_FS_EXT2 |
| default 0 |
| export always |
| comment "Enable ext2 filesystem support" |
| end |
| define CONFIG_FS_ISO9660 |
| default 0 |
| export always |
| comment "Enable ISO9660 filesystem support" |
| end |
| define CONFIG_FS_FAT |
| default 0 |
| export always |
| comment "Enable FAT filesystem support" |
| end |
| define AUTOBOOT_DELAY |
| default 2 |
| export always |
| comment "Delay (in seconds) before autobooting" |
| end |
| define AUTOBOOT_CMDLINE |
| default "hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200" |
| export always |
| format "\"%s\"" |
| comment "Default command line when autobooting" |
| end |
| |
| define USE_WATCHDOG_ON_BOOT |
| default 0 |
| export always |
| comment "Use the watchdog on booting" |
| end |
| |
| ############################################### |
| # Plugin Device support options |
| ############################################### |
| |
| define CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT |
| default 1 |
| export always |
| comment "Enable support for plugin Hypertransport busses" |
| end |
| define CONFIG_AGP_PLUGIN_SUPPORT |
| default 1 |
| export always |
| comment "Enable support for plugin AGP busses" |
| end |
| define CONFIG_CARDBUS_PLUGIN_SUPPORT |
| default 1 |
| export always |
| comment "Enable support cardbus plugin cards" |
| end |
| define CONFIG_PCIX_PLUGIN_SUPPORT |
| default 1 |
| export always |
| comment "Enable support for plugin PCI-X busses" |
| end |
| define CONFIG_PCIEXP_PLUGIN_SUPPORT |
| default 1 |
| export always |
| comment "Enable support for plugin PCI-E busses" |
| end |
| |
| ############################################### |
| # IRQ options |
| ############################################### |
| |
| define HAVE_PIRQ_TABLE |
| default none |
| export used |
| comment "Define if we have a PIRQ table" |
| end |
| define IRQ_SLOT_COUNT |
| default none |
| export used |
| comment "Number of IRQ slots" |
| end |
| define CONFIG_PCIBIOS_IRQ |
| default none |
| export used |
| comment "PCIBIOS IRQ support" |
| end |
| define CONFIG_IOAPIC |
| default none |
| export used |
| comment "IOAPIC support" |
| end |
| |
| ############################################### |
| # IDE specific options |
| ############################################### |
| |
| define CONFIG_IDE |
| default 0 |
| export always |
| comment "Define to include IDE support" |
| end |
| define IDE_BOOT_DRIVE |
| default 0 |
| export always |
| comment "Disk number of boot drive" |
| end |
| define IDE_SWAB |
| default none |
| export used |
| comment "Swap bytes when reading from IDE device" |
| end |
| define IDE_OFFSET |
| default 0 |
| export always |
| comment "Sector at which to start searching for boot image" |
| end |
| |
| ############################################### |
| # Options for memory mapped I/O |
| ############################################### |
| |
| define PCI_IO_CFG_EXT |
| default 0 |
| export always |
| comment "allow 4K register space via io CFG port" |
| end |
| |
| define PCIC0_CFGADDR |
| default none |
| format "0x%x" |
| export used |
| comment "Address of PCI Configuration Address Register" |
| end |
| define PCIC0_CFGDATA |
| default none |
| format "0x%x" |
| export used |
| comment "Address of PCI Configuration Data Register" |
| end |
| define ISA_IO_BASE |
| default none |
| format "0x%x" |
| export used |
| comment "Base address of PCI/ISA I/O address range" |
| end |
| define ISA_MEM_BASE |
| default none |
| format "0x%x" |
| export used |
| comment "Base address of PCI/ISA memory address range" |
| end |
| define PNP_CFGADDR |
| default none |
| format "0x%x" |
| export used |
| comment "PNP Configuration Address Register offset" |
| end |
| define PNP_CFGDATA |
| default none |
| format "0x%x" |
| export used |
| comment "PNP Configuration Data Register offset" |
| end |
| define _IO_BASE |
| default none |
| format "0x%x" |
| export used |
| comment "Base address of memory mapped I/O operations" |
| end |
| |
| ############################################### |
| # Options for embedded systems |
| ############################################### |
| |
| define EMBEDDED_RAM_SIZE |
| default none |
| export used |
| comment "Embedded boards generally have fixed RAM size" |
| end |
| |
| ############################################### |
| # Misc options |
| ############################################### |
| |
| define CONFIG_CHIP_NAME |
| default 0 |
| export always |
| comment "Compile in the chip name" |
| end |
| |
| define CONFIG_GDB_STUB |
| default 0 |
| export used |
| comment "Compile in gdb stub support?" |
| end |
| |
| define HAVE_INIT_TIMER |
| default 0 |
| export always |
| comment "Have a init_timer function" |
| end |
| define HAVE_HARD_RESET |
| default none |
| export used |
| comment "Have hard reset" |
| end |
| define MEMORY_HOLE |
| default none |
| export used |
| comment "Set to deal with memory hole" |
| end |
| define MAX_REBOOT_CNT |
| default 3 |
| export always |
| comment "Set maximum reboots" |
| end |
| |
| ############################################### |
| # Misc device options |
| ############################################### |
| |
| define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 |
| default 0 |
| export used |
| comment "Use timer2 to callibrate the x86 time stamp counter" |
| end |
| define INTEL_PPRO_MTRR |
| default none |
| export used |
| comment "" |
| end |
| define CONFIG_UDELAY_TSC |
| default 0 |
| export used |
| comment "Implement udelay with the x86 time stamp counter" |
| end |
| define CONFIG_UDELAY_IO |
| default 0 |
| export used |
| comment "Implement udelay with x86 io registers" |
| end |
| define FAKE_SPDROM |
| default 0 |
| export always |
| comment "Use this to fake spd rom values" |
| end |
| |
| define HAVE_ACPI_TABLES |
| default 0 |
| export always |
| comment "Define to build ACPI tables" |
| end |
| |
| define ACPI_SSDTX_NUM |
| default 0 |
| export always |
| comment "extra ssdt num for PCI Device" |
| end |
| |
| define AGP_APERTURE_SIZE |
| default none |
| export used |
| format "0x%x" |
| comment "AGP graphics virtual memory aperture size" |
| end |
| |
| define HT_CHAIN_UNITID_BASE |
| default 1 |
| export always |
| comment "this will be first hypertransport device's unitid base, if sb ht chain only has one ht device, it could be 0" |
| end |
| |
| define HT_CHAIN_END_UNITID_BASE |
| default 0x20 |
| export always |
| comment "this will be unit id of the end of hypertransport chain (usually the real SB) if it is small than HT_CHAIN_UNITID_BASE, it could be 0" |
| end |
| |
| define SB_HT_CHAIN_UNITID_OFFSET_ONLY |
| default 1 |
| export always |
| comment "this will decided if only offset SB hypertransport chain" |
| end |
| |
| define SB_HT_CHAIN_ON_BUS0 |
| default 0 |
| export always |
| comment "this will make SB hypertransport chain sit on bus 0, if it is 1, will put sb ht chain on bus 0, if it is 2 will put other chain on 0x40, 0x80, 0xc0" |
| end |
| |
| define PCI_BUS_SEGN_BITS |
| default 0 |
| export always |
| comment "It could be 0, 1, 2, 3 and 4 only" |
| end |
| |
| define MMCONF_SUPPORT |
| default 0 |
| export always |
| comment "enable mmconfig for pci conf" |
| end |
| |
| define HW_MEM_HOLE_SIZEK |
| default 0 |
| export always |
| comment "Opteron E0 later memory hole size in K, 0 mean disable" |
| end |
| |
| define HW_MEM_HOLE_SIZE_AUTO_INC |
| default 0 |
| export always |
| comment "Opteron E0 later memory hole size auto increase to avoid hole startk equal to basek" |
| end |
| |
| define K8_HT_FREQ_1G_SUPPORT |
| default 0 |
| export always |
| comment "Optern E0 later could support 1G HT, but still depends MB design" |
| end |
| |
| define K8_REV_F_SUPPORT |
| default 0 |
| export always |
| comment "Opteron Rev F (DDR2) support" |
| end |
| |
| define CBB |
| default 0 |
| export always |
| comment "Opteron cpu bus num base" |
| end |
| |
| define CDB |
| default 0x18 |
| export always |
| comment "Opteron cpu device num base" |
| end |
| |
| define DIMM_SUPPORT |
| default 0x0108 |
| format "0x%x" |
| export always |
| comment "DIMM support: bit 0 - sdram, bit 1: ddr1, bit 2: ddr2, bit 3: ddr3, bit 4: fbdimm, bit 8: reg" |
| end |
| |
| define CPU_SOCKET_TYPE |
| default 0x10 |
| export always |
| comment "cpu socket type, 0x10 mean Socket F, 0x11 mean socket M2, 0x20, Soxket G, and 0x21 mean socket M3" |
| end |
| |
| define CPU_ADDR_BITS |
| default 36 |
| export always |
| comment "CPU hardware address lines num, for AMD K8 could be 40, and GH could be 48" |
| end |
| |
| define CONFIG_PCI_ROM_RUN |
| default 0 |
| export always |
| comment "Init PCI device option rom" |
| end |
| |
| define CONFIG_PCI_64BIT_PREF_MEM |
| default 0 |
| export always |
| comment "allow PCI device get 4G above Region as pref mem" |
| end |
| |
| define CONFIG_VIDEO_MB |
| default none |
| export used |
| comment "Integrated graphics with UMA has dynamic setup" |
| end |
| |
| |
| |
| ############################################### |
| # Board specific options |
| ############################################### |
| |
| ############################################### |
| # Options for motorola/sandpoint |
| ############################################### |
| define CONFIG_SANDPOINT_ALTIMUS |
| default 0 |
| export never |
| comment "Configure Sandpoint with Altimus PMC" |
| end |
| define CONFIG_SANDPOINT_TALUS |
| default 0 |
| export never |
| comment "Configure Sandpoint with Talus PMC" |
| end |
| define CONFIG_SANDPOINT_UNITY |
| default 0 |
| export never |
| comment "Configure Sandpoint with Unity PMC" |
| end |
| define CONFIG_SANDPOINT_VALIS |
| default 0 |
| export never |
| comment "Configure Sandpoint with Valis PMC" |
| end |
| define CONFIG_SANDPOINT_GYRUS |
| default 0 |
| export never |
| comment "Configure Sandpoint with Gyrus PMC" |
| end |
| |
| ############################################### |
| # Options for totalimpact/briq |
| ############################################### |
| define CONFIG_BRIQ_750FX |
| default 0 |
| export never |
| comment "Configure briQ with PowerPC 750FX" |
| end |
| define CONFIG_BRIQ_7400 |
| default 0 |
| export never |
| comment "Configure briQ with PowerPC G4" |
| end |