/*
 *****************************************************************************
 *
 * Copyright (c) 2011, Advanced Micro Devices, Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
 *       its contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * ***************************************************************************
 *
 */

#pragma pack (push, 1)

#define CIMX_SB_REVISION       "1.1.0.6"
#define CIMX_SB_ID             "SB80A13"
#ifndef SBCIMx_Version
  #define SBCIMx_Version         0x1106
#endif //CIMx_Version


/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_POWERON_INIT_Page SB_POWERON_INIT
 *  @section SB_POWERON_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_POWERON_INIT_CallIn Call Prototype
 *  @par
 *     sbPowerOnInit ((AMDSBCFG*) pConfig) (Followed PH Interface)
 *  @subsection SB_BEFORE_PCI_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_POWERON_INIT   --> 0x00010001 </TD></TR>
 *  </TABLE>
 *  @subsection SB_POWERON_INIT_CallOut Prepare for Callout
 *  @par
 *     Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_POWERON_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::BiosSize </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::LegacyFree </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::EcKbd </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::WatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::GecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::CpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_POWERON_INIT             0x00010001
#define OUTDEBUG_PORT               0x00010002
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_BEFORE_PCI_INIT_Page SB_BEFORE_PCI_INIT
 *  @section SB_BEFORE_PCI_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_BEFORE_PCI_INIT_CallIn Call Prototype
 *  @par
 *     sbBeforePciInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
 *  @subsection SB_BEFORE_PCI_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_INIT  --> 0x00010010 </TD></TR>
 *  </TABLE>
 *  @subsection SB_BEFORE_PCI_INIT_CallOut Prepare for Callout
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR>
 *     <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR>
 *  </TABLE>
 *  @subsection SB_BEFORE_PCI_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_BEFORE_PCI_INIT          0x00010010
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_AFTER_PCI_INIT_Page SB_AFTER_PCI_INIT
 *  @section SB_AFTER_PCI_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_AFTER_PCI_INIT_CallIn Call Prototype
 *  @par
 *     sbAfterPciInit ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_AFTER_PCI_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_AFTER_PCI_INIT --> 0x00010020 </TD></TR>
 *  </TABLE>
 *  @subsection SB_AFTER_PCI_INIT_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_AFTER_PCI_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_AFTER_PCI_INIT           0x00010020
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_MID_POST_INIT_Page SB_MID_POST_INIT
 *  @section SB_MID_POST_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_MID_POST_INIT_CallIn Call Prototype
 *  @par
 *     sbMidPostInit ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_MID_POST_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_MID_POST_INIT  --> 0x00010021 </TD></TR>
 *  </TABLE>
 *  @subsection SB_MID_POST_INIT_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_MID_POST_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_MID_POST_INIT           0x00010021
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_LATE_POST_INIT_Page SB_LATE_POST_INIT
 *  @section SB_LATE_POST_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_LATE_POST_INIT_CallIn Call Prototype
 *  @par
 *     sbLatePost ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_LATE_POST_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_LATE_POST_INIT  --> 0x00010030 </TD></TR>
 *  </TABLE>
 *  @subsection SB_LATE_POST_INIT_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_LATE_POST_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_LATE_POST_INIT           0x00010030
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_BEFORE_PCI_RESTORE_INIT_Page SB_BEFORE_PCI_RESTORE_INIT
 *  @section SB_BEFORE_PCI_RESTORE_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_BEFORE_PCI_RESTORE_INIT_CallIn Call Prototype
 *  @par
 *     sbBeforePciRestoreInit ((AMDSBCFG*)pConfig) (Followed PH Interface)
 *  @subsection SB_BEFORE_PCI_RESTORE_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_RESTORE_INIT  --> 0x00010040 </TD></TR>
 *  </TABLE>
 *  @subsection SB_BEFORE_PCI_RESTORE_INIT_CallOut Prepare for Callout
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR>
 *     <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR>
 *  </TABLE>
 *  @subsection SB_BEFORE_PCI_RESTORE_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_BEFORE_PCI_RESTORE_INIT  0x00010040
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_AFTER_PCI_RESTORE_INIT_Page SB_AFTER_PCI_RESTORE_INIT
 *  @section SB_AFTER_PCI_RESTORE_INIT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_AFTER_PCI_RESTORE_INIT_CallIn Call Prototype
 *  @par
 *     sbAfterPciRestoreInit ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_AFTER_PCI_RESTORE_INIT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_AFTER_PCI_RESTORE_INIT  --> 0x00010050 </TD></TR>
 *  </TABLE>
 *  @subsection SB_AFTER_PCI_RESTORE_INIT_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_AFTER_PCI_RESTORE_INIT_Config Prepare for Configuration Data.
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *     <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR>
 *  </TABLE>
 *
 */
#define SB_AFTER_PCI_RESTORE_INIT   0x00010050
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_SMM_SERVICE_Page SB_SMM_SERVICE
 *  @section SB_SMM_SERVICE Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_SMM_SERVICE_CallIn Call Prototype
 *  @par
 *     sbSmmService ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_SMM_SERVICE_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_SMM_SERVICE  --> 0x00010060 </TD></TR>
 *  </TABLE>
 *  @subsection SB_SMM_SERVICE_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_SMM_SERVICE_Config Prepare for Configuration Data.
 *  @par
 *     Not necessary on current implementation
 *
 */
#define SB_SMM_SERVICE              0x00010060
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page SB_SMM_ACPION_Page SB_SMM_ACPION
 *  @section SB_SMM_ACPION Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection SB_SMM_ACPION_CallIn Call Prototype
 *  @par
 *     sbSmmAcpiOn ((AMDSBCFG*)pConfig)     (Followed PH Interface)
 *  @subsection SB_SMM_ACPION_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> SB_SMM_ACPION  --> 0x00010061 </TD></TR>
 *  </TABLE>
 *  @subsection SB_SMM_ACPION_CallOut Prepare for Callout
 *  @par
 *    Not Applicable (Not necessary for the current implementation)
 *  @subsection SB_SMM_ACPION_Config Prepare for Configuration Data.
 *  @par
 *     Not necessary on current implementation
 *
 */
#define SB_SMM_ACPION               0x00010061
#define SB_EC_FANCONTROL            0x00010070

#ifndef OEM_CALLBACK_BASE
  #define OEM_CALLBACK_BASE         0x00010100
#endif

//0x00 - 0x0F callback functions are reserved for bootblock
#define SATA_PHY_PROGRAMMING        OEM_CALLBACK_BASE + 0x10
#define PULL_UP_PULL_DOWN_SETTINGS  OEM_CALLBACK_BASE + 0x20
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT
 *  @section CB_SBGPP_RESET_ASSERT Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT  --> 0x00010130 </TD></TR>
 *  </TABLE>
 *  @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data.
 *  @par
 *     Not necessary on current implementation
 *
 */
#define CB_SBGPP_RESET_ASSERT       OEM_CALLBACK_BASE + 0x30
/*--------------------------- Documentation Pages ---------------------------*/
/**
 *  @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT
 *  @section CB_SBGPP_RESET_DEASSERT  Interface Call
 *  Initialize structure referenced by AMDSBCFG to default recommended value.
 *  @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID
 *  @par
 *  <TABLE border="0">
 *     <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT   --> 0x00010131 </TD></TR>
 *  </TABLE>
 *  @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data.
 *  @par
 *     Not necessary on current implementation
 *
 */
#define CB_SBGPP_RESET_DEASSERT     OEM_CALLBACK_BASE + 0x31

#define IMC_FIRMWARE_FAIL           OEM_CALLBACK_BASE + 0x40

#define CFG_ADDR_PORT               0xCF8
#define CFG_DATA_PORT               0xCFC

#define ALINK_ACCESS_INDEX          0x0CD8
#define ALINK_ACCESS_DATA           ALINK_ACCESS_INDEX + 4

/*------------------------------------------------------------------
; I/O Base Address - Should be set by host BIOS
;------------------------------------------------------------------ */
#define DELAY_PORT                  0x0E0

/*------------------------------------------------------------------
; Fuse ID and minor ID of efuse bits
;------------------------------------------------------------------ */
#define FUSE_ID_EFUSE_LOC           0x1F            // efuse bits 248-255
#define MINOR_ID_EFUSE_LOC          0x1E            // efuse bits 240-247
#define M1_D1_FUSE_ID               0x70
#define M1_MINOR_ID                 0x02

/*------------------------------------------------------------------
; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display
;------------------------------------------------------------------ */
// ASIC VendorID and DeviceIDs
#define AMD_SB_VID                  0x1002
#define SB_DEVICE_ID                0x4385         /* AMD ER SB800 */
#define V_SB_SATA_VID               AMD_SB_VID      // dev 17 Func 0
#define V_SB_SATA_DID               0x4390
#define V_SB_SATA_AHCI_DID          0x4391
#define V_SB_SATA_RAID_DID          0x4392
#define V_SB_SATA_RAID5_DID         0x4393
#define V_SB_USB_OHCI_VID           AMD_SB_VID      // dev 18 Func 0, dev 19 Func 0, dev 22 Func 0
#define V_SB_USB_OHCI_DID           0x4397
#define V_SB_USB_EHCI_VID           AMD_SB_VID      // dev 18 Func 2, dev 19 Func 2, dev 22 Func 2
#define V_SB_USB_EHCI_DID           0x4396
#define V_SB_SMBUS_VID              AMD_SB_VID      // dev 20 Func 0
#define V_SB_SMBUS_DID              0x4385
#define V_SB_IDE_VID                AMD_SB_VID      // dev 20 Func 1
#define V_SB_IDE_DID                0x439C
#define V_SB_AZALIA_VID             AMD_SB_VID      // dev 20 Func 2
#define V_SB_AZALIA_DID             0x4383
#define V_SB_LPC_VID                AMD_SB_VID      // dev 20 Func 3
#define V_SB_LPC_DID                0x439D
#define V_SB_PCIB_VID               AMD_SB_VID      // dev 20 Func 4
#define V_SB_PCIB_DID               0x4384
#define V_SB_USB_OHCIF_VID          AMD_SB_VID      // dev 20 Func 5
#define V_SB_USB_OHCIF_DID          0x4399
#define V_SB_NIC_VID                0x14E4          // dev 20 Func 6
#define V_SB_NIC_DID                0x1699

//Misc
#define ACPI_SMI_CMD_PORT   0xB0
#define ACPI_SMI_DATA_PORT  0xB1
#define R_SB_ACPI_PM1_STATUS              0x00
#define R_SB_ACPI_PM1_ENABLE              0x02
#define R_SB_ACPI_PM_CONTROL              0x04
#define R_SB_ACPI_EVENT_STATUS            0x20
#define R_SB_ACPI_EVENT_ENABLE            0x24
#define R_SB_PM_ACPI_PMA_CNT_BLK_LO       0x2C

#define SATA_BUS_DEV_FUN            ((0x11 << 3) + 0)
#define SB_SATA1_BUS        0
#define SB_SATA1_DEV        17
#define SB_SATA1_FUNC       0

#define FC_BUS_DEV_FUN              ((0x11 << 3) + 1)
#define USB1_OHCI_BUS_DEV_FUN       ((0x12 << 3) + 0)    // PORT 0-4
#define SB_OHCI1_BUS        0
#define SB_OHCI1_DEV        18
#define SB_OHCI1_FUNC       0
#define USB2_OHCI_BUS_DEV_FUN       ((0x13 << 3) + 0)    // PORT 5-9
#define SB_OHCI2_BUS        0
#define SB_OHCI2_DEV        19
#define SB_OHCI2_FUNC       0
#define USB3_OHCI_BUS_DEV_FUN       ((0x16 << 3) + 0)    // PORT 10-13
#define SB_OHCI3_BUS        0
#define SB_OHCI3_DEV        22
#define SB_OHCI3_FUNC       0
#define USB1_EHCI_BUS_DEV_FUN       ((0x12 << 3) + 2)    // PORT 0-4
#define SB_EHCI1_BUS        0
#define SB_EHCI1_DEV        18
#define SB_EHCI1_FUNC       2
#define USB2_EHCI_BUS_DEV_FUN       ((0x13 << 3) + 2)    // PORT 5-9
#define SB_EHCI2_BUS        0
#define SB_EHCI2_DEV        19
#define SB_EHCI2_FUNC       2
#define USB3_EHCI_BUS_DEV_FUN       ((0x16 << 3) + 2)    // PORT 10-13
#define SB_EHCI3_BUS        0
#define SB_EHCI3_DEV        22
#define SB_EHCI3_FUNC       2

#define SMBUS_BUS_DEV_FUN           ((0x14 << 3) + 0)
#define SB_ISA_BUS          0
#define SB_ISA_DEV          20
#define SB_ISA_FUNC         0
#define IDE_BUS_DEV_FUN             ((0x14 << 3) + 1)
#define SB_IDE_BUS          0
#define SB_IDE_DEV          20
#define SB_IDE_FUNC         1
#define AZALIA_BUS_DEV_FUN          ((0x14 << 3) + 2)
#define SB_AZALIA_BUS       0
#define SB_AZALIA_DEV       20
#define SB_AZALIA_FUNC      2
#define LPC_BUS_DEV_FUN             ((0x14 << 3) + 3)
#define SB_LPC_BUS          0
#define SB_LPC_DEV          20
#define SB_LPC_FUNC         3
#define PCIB_BUS_DEV_FUN            ((0x14 << 3) + 4)    // P2P in SB700
#define SB_PCI_BUS          0
#define SB_PCI_DEV          20
#define SB_PCI_FUNC         4
#define USB4_OHCI_BUS_DEV_FUN       ((0x14 << 3) + 5)    // PORT FL0 - FL1
#define SB_OHCI4_BUS        0
#define SB_OHCI4_DEV        20
#define SB_OHCI4_FUNC       5
//Gigabyte Ethernet Controller
#define GEC_BUS_DEV_FUN             ((0x14 << 3) + 6)
#define SB_GBEC_BUS         0
#define SB_GBEC_DEV         20
#define SB_GBEC_FUNC        6

#define SB_GPP_BUS          0
#define SB_GPP_DEV          21
#define SB_GPP_FUNC         0
#define GPP0_BUS_DEV_FUN            ((0x15 << 3) + 0)    // GPP P2P bridge PORT0
#define GPP1_BUS_DEV_FUN            ((0x15 << 3) + 1)    // GPP P2P bridge PORT1
#define GPP2_BUS_DEV_FUN            ((0x15 << 3) + 2)    // GPP P2P bridge PORT2
#define GPP3_BUS_DEV_FUN            ((0x15 << 3) + 3)    // GPP P2P bridge PORT3

#define ACPI_MMIO_BASE  0xFED80000
#define SB_CFG_BASE     0x000   // DWORD
#define GPIO_BASE       0x100   // BYTE
#define SMI_BASE        0x200   // DWORD
#define PMIO_BASE       0x300   // DWORD
#define PMIO2_BASE      0x400   // BYTE
#define BIOS_RAM_BASE   0x500   // BYTE
#define CMOS_RAM_BASE   0x600   // BYTE
#define CMOS_BASE       0x700   // BYTE
#define ASF_BASE        0x900   // DWORD
#define SMBUS_BASE      0xA00   // DWORD
#define WATCHDOG_BASE   0xB00   // ??
#define HPET_BASE       0xC00   // DWORD
#define IOMUX_BASE      0xD00   // BYTE
#define MISC_BASE       0xE00

#define GPP_EFUSE_LOCATION  0x14 // bit 160
#define GPP_GEN2_EFUSE_BIT  BIT0

// RegSpace field (AB_INDEX[31:29]
#define AXINDC         0               // AXINDC
#define AXINDP         2               // AXINDP
#define ABCFG          6               // ABCFG
#define AXCFG          4               // AXCFG
#define RCINDXC        1               // PCIEIND
#define RCINDXP        3               // PCIEIND_P

#define SBTEMP_BUS       8
#define GPP_DEV_NUM    21              //?? Code style different
#define MAX_GPP_PORTS  4
#ifndef TRUE
  #define TRUE         1
#endif
#ifndef FALSE
  #define FALSE        0
#endif
//
// ABCFG Registers
//
#define SB_ABCFG_REG00     0x00  // VENDOR ID
#define SB_ABCFG_REG08     0x08  // REVISION ID
#define SB_ABCFG_REG40     0x40  // BL_EVENTCNT0LO
#define SB_ABCFG_REG44     0x44  // BL_EVENTCNT1LO
#define SB_ABCFG_REG48     0x48  // BL_EVENTCNTSEL
#define SB_ABCFG_REG4A     0x4A  // BL_EVENTCNT0HI
#define SB_ABCFG_REG4B     0x4B  // BL_EVENTCNT1HI
#define SB_ABCFG_REG4C     0x4C  // BL_EVENTCNTCTL
#define SB_ABCFG_REG50     0x50  // MISCCTL_50
#define SB_ABCFG_REG54     0x54  // MISCCTL_54
#define SB_ABCFG_REG58     0x58  // BL RAB CONTROL

#define SB_ABCFG_REG60     0x60  // LINKWIDTH_CTL
#define SB_ABCFG_REG64     0x64  // LINKWIDTH_UP_INTERVAL
#define SB_ABCFG_REG68     0x68  // LINKWIDTH_DN_INVERVAL
#define SB_ABCFG_REG6C     0x6C  // LINKWIDTH_UPSTREAM_DWORDS
#define SB_ABCFG_REG70     0x70  // LINKWIDTH_DOWNSTREAM_DWORDS
#define SB_ABCFG_REG74     0x74  // LINKWIDTH_THRESHOLD_INCREASE
#define SB_ABCFG_REG78     0x78  // LINKWIDTH_THRESHOLD_DECREASE

#define SB_ABCFG_REG80     0x80  // BL DMA PREFETCH CONTROL
#define SB_ABCFG_REG88     0x88  //
#define SB_ABCFG_REG90     0x90  // BIF CONTROL 0
#define SB_ABCFG_REG94     0x94  // MSI CONTROL
#define SB_ABCFG_REG98     0x98  // BIF CONTROL 1
#define SB_ABCFG_REG9C     0x9C  // MISCCTL_9C
#define SB_ABCFG_REGA0     0xA0  // BIF PHY CONTROL ENABLE
#define SB_ABCFG_REGA4     0xA4  // BIF PHY CONTROL A4
#define SB_ABCFG_REGA8     0xA8  // BIF PHY CONTROL A8
#define SB_ABCFG_REGB0     0xB0  // HYPERFLASH-PCIE PORT MAPPING
#define SB_ABCFG_REGC0     0xC0  // PCIE_GPP_ENABLE
#define SB_ABCFG_REGC4     0xC4  // PCIE_P2P_INT_MAP
#define SB_ABCFG_REGD0     0xD0  // MCTP_VDM_TX_FIFO_DATA
#define SB_ABCFG_REGD4     0xD4  // MCTP_VMD_TX_CONTROL
#define SB_ABCFG_REGE0     0xE0  // MCTP_VDM_RX_FIFO_DATA
#define SB_ABCFG_REGE4     0xE4  // MCTP_VDM_RX_FIFO_STATUS
#define SB_ABCFG_REGEC     0xEC  // MCTP_VDM_CONTROL
#define SB_ABCFG_REGF0     0xF0  // GPP_UPSTREAM_CONTROL
#define SB_ABCFG_REGFC     0xFC  // SB_TRAP_CONTROL
#define SB_ABCFG_REG100    0x100 // SB_TRAP0_ADDRL
#define SB_ABCFG_REG104    0x104 // SB_TRAP0_ADDRH
#define SB_ABCFG_REG108    0x108 // SB_TRAP0_CMD
#define SB_ABCFG_REG10C    0x10C // SB_TRAP1_DATA
#define SB_ABCFG_REG110    0x110 // SB_TRAP1_ADDRL
#define SB_ABCFG_REG114    0x114 // SB_TRAP1_ADDRH
#define SB_ABCFG_REG118    0x118 // SB_TRAP1_CMD
#define SB_ABCFG_REG11C    0x11C // SB_TRAP1_DATA
#define SB_ABCFG_REG120    0x120 // SB_TRAP2_ADDRL
#define SB_ABCFG_REG124    0x124 // SB_TRAP2_ADDRH
#define SB_ABCFG_REG128    0x128 // SB_TRAP2_CMD
#define SB_ABCFG_REG12C    0x12C // SB_TRAP2_DATA
#define SB_ABCFG_REG130    0x130 // SB_TRAP3_ADDRL
#define SB_ABCFG_REG134    0x134 // SB_TRAP3_ADDRH
#define SB_ABCFG_REG138    0x138 // SB_TRAP3_CMD
#define SB_ABCFG_REG13C    0x13C // SB_TRAP3_DATA
#define SB_ABCFG_REG300    0x300 // MCTP_VDM_RX_SMI_CONTROL
#define SB_ABCFG_REG310    0x310 // BIF_GPP_STRAP_SYSTEM_0
#define SB_ABCFG_REG314    0x314 // BIF_GPP_STRAP_SYSTEM_1
#define SB_ABCFG_REG31C    0x31C // BIF_GPP_STRAP_LINK_CONTROL_0
#define SB_ABCFG_REG320    0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A
#define SB_ABCFG_REG324    0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B
#define SB_ABCFG_REG328    0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C
#define SB_ABCFG_REG32C    0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D
#define SB_ABCFG_REG330    0x330 // BIF_GPP_STRAP_BIF_0
#define SB_ABCFG_REG334    0x334 // BIF_GPP_STRAP_BIF_1
#define SB_ABCFG_REG338    0x338 // BIF_GPP_STRAP_BIF_2
#define SB_ABCFG_REG340    0x340 // BIF_GPP_STRAP_BIF_LANE_A
#define SB_ABCFG_REG344    0x344 // BIF_GPP_STRAP_BIF_LANE_B
#define SB_ABCFG_REG348    0x348 // BIF_GPP_STRAP_BIF_LANE_C
#define SB_ABCFG_REG34C    0x34C // BIF_GPP_STRAP_BIF_LANE_D
#define SB_ABCFG_REG350    0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0
#define SB_ABCFG_REG354    0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1
#define SB_ABCFG_REG404    0x404 // GPP0_SHADOW_COMMAND
#define SB_ABCFG_REG418    0x418 // GPP0_SHADOW_BUS_NUMBER
#define SB_ABCFG_REG41C    0x41C // GPP0_SHADOW_IO_LIMIT_BASE
#define SB_ABCFG_REG420    0x420 // GPP0_SHADOW_MEM_LIMIT_BASE
#define SB_ABCFG_REG424    0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE
#define SB_ABCFG_REG428    0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER
#define SB_ABCFG_REG42C    0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER
#define SB_ABCFG_REG430    0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER
#define SB_ABCFG_REG43C    0x43C // GPP0_SHADOW_BRIDGE_CONTROL
#define SB_ABCFG_REG444    0x444 // GPP1_SHADOW_COMMAND
#define SB_ABCFG_REG458    0x458 // GPP1_SHADOW_BUS_NUMBER
#define SB_ABCFG_REG45C    0x45C // GPP1_SHADOW_IO_LIMIT_BASE
#define SB_ABCFG_REG460    0x460 // GPP1_SHADOW_MEM_LIMIT_BASE
#define SB_ABCFG_REG464    0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE
#define SB_ABCFG_REG468    0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER
#define SB_ABCFG_REG46C    0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER
#define SB_ABCFG_REG470    0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER
#define SB_ABCFG_REG47C    0x47C // GPP1_SHADOW_BRIDGE_CONTROL
#define SB_ABCFG_REG484    0x484 // GPP2_SHADOW_COMMAND
#define SB_ABCFG_REG498    0x498 // GPP2_SHADOW_BUS_NUMBER
#define SB_ABCFG_REG49C    0x49C // GPP2_SHADOW_IO_LIMIT_BASE
#define SB_ABCFG_REG4A0    0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE
#define SB_ABCFG_REG4A4    0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE
#define SB_ABCFG_REG4A8    0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER
#define SB_ABCFG_REG4AC    0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER
#define SB_ABCFG_REG4B0    0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER
#define SB_ABCFG_REG4BC    0x4BC // GPP2_SHADOW_BRIDGE_CONTROL
#define SB_ABCFG_REG4C4    0x4C4 // GPP3_SHADOW_COMMAND
#define SB_ABCFG_REG4D8    0x4D8 // GPP3_SHADOW_BUS_NUMBER
#define SB_ABCFG_REG4DC    0x4DC // GPP3_SHADOW_IO_LIMIT_BASE
#define SB_ABCFG_REG4E0    0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE
#define SB_ABCFG_REG4E4    0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE
#define SB_ABCFG_REG4E8    0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER
#define SB_ABCFG_REG4EC    0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER
#define SB_ABCFG_REG4F0    0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER
#define SB_ABCFG_REG4FC    0x4FC // GPP3_SHADOW_BRIDGE_CONTROL
#define SB_ABCFG_REG10040  0x10040  // AL_EVENTCNT0LO
#define SB_ABCFG_REG10044  0x10044  // AL_EVENTCNT1LO
#define SB_ABCFG_REG10048  0x10048  // AL_EVENTCNTSEL
#define SB_ABCFG_REG1004A  0x1004A  // AL_EVENTCNT0HI
#define SB_ABCFG_REG1004B  0x1004B  // AL_EVENTCNT1HI
#define SB_ABCFG_REG1004C  0x1004C  // AL_EVENTCNTCTL
#define SB_ABCFG_REG10050  0x10050  // MISCCTL_10050
#define SB_ABCFG_REG10054  0x10054  // AL_ARB_CTL
#define SB_ABCFG_REG10056  0x10056  // AL_CLK_CTL
#define SB_ABCFG_REG10058  0x10058  // AL RAB CONTROL
#define SB_ABCFG_REG1005C  0x1005C  // AL MLT CONTROL
#define SB_ABCFG_REG10060  0x10060  // AL DMA PREFETCH ENABLE
#define SB_ABCFG_REG10064  0x10064  // AL DMA PREFETCH FLUSH CONTROL
#define SB_ABCFG_REG10068  0x10068  // AL PREFETCH LIMIT
#define SB_ABCFG_REG1006C  0x1006C  // AL DMA PREFETCH CONTROL
#define SB_ABCFG_REG10070  0x10070  // MISCCTL_10070
#define SB_ABCFG_REG10080  0x10080  // CLKMUXSTATUS
#define SB_ABCFG_REG10090  0x10090  // BIF CONTROL 0
#define SB_ABCFG_REG1009C  0x1009C  // MISCCTL_1009C

//
// RCINDX_P Registers
//
#define SB_RCINDXP_REG01   0x01 | RCINDXP << 29 // PCIEP_SCRATCH
#define SB_RCINDXP_REG10   0x10 | RCINDXP << 29 //
#define SB_RCINDXP_REG20   0x20 | RCINDXP << 29 // PCIE_TX_CNTL
#define SB_RCINDXP_REG50   0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS
#define SB_RCINDXP_REG70   0x70 | RCINDXP << 29 // PCIE_RX_CNTL
#define SB_RCINDXP_REGA0   0xA0 | RCINDXP << 29 // PCIE_LC_CNTL
#define SB_RCINDXP_REGA1   0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL
#define SB_RCINDXP_REGA2   0xA2 | RCINDXP << 29 //
#define SB_RCINDXP_REGA4   0xA4 | RCINDXP << 29 //
#define SB_RCINDXP_REGA5   0xA5 | RCINDXP << 29 // PCIE_LC_STATE0
#define SB_RCINDXP_REGC0   0xC0 | RCINDXP << 29 //

//
// RCINDX_C Registers
//
#define SB_RCINDXC_REG02   0x02 | RCINDXC << 29  // PCIE_HW_DEBUG
#define SB_RCINDXC_REG10   0x10 | RCINDXC << 29  // PCIE_CNTL
#define SB_RCINDXC_REGC1   0xC1 | RCINDXC << 29  //

//
// AXINDC Registers
//
#define SB_AX_INDXC_REG02  0x02 // PCIEP_HW_DEBUG
#define SB_AX_INDXC_REG10  0x10
#define SB_AX_INDXC_REG30  0x30
#define SB_AX_DATAC_REG34  0x34
#define SB_AX_INDXP_REG38  0x38
#define SB_AX_DATAP_REG3C  0x3C
#define SB_AX_INDXC_REG40  0x40 | AXINDC << 29
#define SB_AX_INDXC_REGA4  0xA4 | AXINDC << 29

#define SB_AX_INDXP_REGA0  0xA0 | AXINDP << 29
#define SB_AX_INDXP_REGA4  0xA4 | AXINDP << 29
#define SB_AX_INDXP_REGB1  0xB1 | AXINDP << 29

#define SB_AX_CFG_REG88    0x88 | AXCFG << 29

#define AX_INDXC            0
#define AX_INDXP            1
#define SB_AB_REG04         0x04
#define SB_AB_REG40         0x40

#define RC_INDXC_REG40     0x40 | RCINDXC << 29
#define RC_INDXC_REG65     0x65 | RCINDXC << 29

//
//  SATA Device 0x4390 (IDE)
//              0x4391 (AHCI)
//              0x4392 (AHCI/RAID Promise with RAID driver)
//              0x4393 (RAID5)
//              0x4394/0x4395 (SATA HyperFlash OneNand support/SATA HyperFlash-PCIe support)
//  Device 17 (0x11) Func 0
//
//Sata Controller Mode
#define NATIVE_IDE_MODE        0
#define RAID_MODE              1
#define AHCI_MODE              2
#define LEGACY_IDE_MODE        3
#define IDE_TO_AHCI_MODE       4
#define AHCI_MODE_4394         5
#define IDE_TO_AHCI_MODE_4394  6

//Sata Port Configuration
#define SIX_PORTS       0
#define FOUR_PORTS      1

#define SATA_EFUSE_LOCATION     0x10    // EFUSE bit 133
#define SATA_FIS_BASE_EFUSE_LOC 0x15    // EFUSE bit 169
#define SATA_EFUSE_BIT          0x20    //
#define SB_SATA_REG00           0x000   // Vendor ID - R- 16 bits
#define SB_SATA_REG02           0x002   // Device ID - RW -16 bits
#define SB_SATA_REG04           0x004   // PCI Command - RW - 16 bits
#define SB_SATA_REG06           0x006   // PCI Status - RW - 16 bits
#define SB_SATA_REG08           0x008   // Revision ID/PCI Class Code - R - 32 bits - Offset: 08
#define SB_SATA_REG0C           0x00C   // Cache Line Size - R/W - 8bits
#define SB_SATA_REG0D           0x00D   // Latency Timer - RW - 8 bits
#define SB_SATA_REG0E           0x00E   // Header Type - R - 8 bits
#define SB_SATA_REG0F           0x00F   // BIST - R - 8 bits
#define SB_SATA_REG10           0x010   // Base Address Register 0 - RW - 32 bits
#define SB_SATA_REG14           0x014   // Base Address Register 1 - RW- 32 bits
#define SB_SATA_REG18           0x018   // Base Address Register 2 - RW - 32 bits
#define SB_SATA_REG1C           0x01C   // Base Address Register 3 - RW - 32 bits
#define SB_SATA_REG20           0x020   // Base Address Register 4 - RW - 32 bits
#define SB_SATA_REG24           0x024   // Base Address Register 5 - RW - 32 bits
#define SB_SATA_REG2C           0x02C   // Subsystem Vendor ID - R - 16 bits
#define SB_SATA_REG2D           0x02D   // Subsystem ID - R - 16 bits
#define SB_SATA_REG30           0x030   // Expansion ROM Base Address - 32 bits
#define SB_SATA_REG34           0x034   // Capabilities Pointer - R - 32 bits
#define SB_SATA_REG3C           0x03C   // Interrupt Line - RW - 8 bits
#define SB_SATA_REG3D           0x03D   // Interrupt Pin - R - 8 bits
#define SB_SATA_REG3E           0x03E   // Min Grant - R - 8 bits
#define SB_SATA_REG3F           0x03F   // Max Latency - R - 8 bits
#define SB_SATA_REG40           0x040   // Configuration - RW - 32 bits
#define SB_SATA_REG44           0x044   // Software Data Register - RW - 32 bits
#define SB_SATA_REG48           0x048
#define SB_SATA_REG50           0x050   // Message Capability - R - 16 bits
#define SB_SATA_REG52           0x052   // Message Control - R/W - 16 bits
#define SB_SATA_REG54           0x054   // Message Address - R/W - 32 bits
#define SB_SATA_REG58           0x058   // Message Data - R/W - 16 bits
#define SB_SATA_REG5C           0x05C   // RAMBIST Control Register - R/W - 8 bits
#define SB_SATA_REG5D           0x05D   // RAMBIST Status0 Register - R - 8 bits
#define SB_SATA_REG5E           0x05E   // RAMBIST Status1 Register - R - 8 bits
#define SB_SATA_REG60           0x060   // Power Management Capabilities - R - 32 bits
#define SB_SATA_REG64           0x064   // Power Management Control + Status - RW - 32 bits
#define SB_SATA_REG68           0x068   // MSI Program - R/W - 8 bits
#define SB_SATA_REG69           0x069   // PCI Burst Timer - R/W - 8 bits
#define SB_SATA_REG70           0x070   // PCI Bus Master - IDE0 - RW - 32 bits
#define SB_SATA_REG74           0x074   // PRD Table Address - IDE0 - RW - 32 bits
#define SB_SATA_REG78           0x078   // PCI Bus Master - IDE1 - RW - 32 bits
#define SB_SATA_REG7C           0x07C   // PRD Table Address - IDE1 - RW - 32 bits
#define SB_SATA_REG80           0x080   // Data Transfer Mode - IDE0 - RW - 32 bits
#define SB_SATA_REG84           0x084   // Data Transfer Mode - IDE1 - RW - 32 bits
#define SB_SATA_REG86           0x086   // PY Global Control
#define SB_SATA_REG87           0x087
#define SB_SATA_REG88           0x088   // PHY Port0 Control - Port0 PY fine tune (0:23)
#define SB_SATA_REG8A           0x08A
#define SB_SATA_REG8C           0x08C   // PHY Port1 Control - Port0 PY fine tune (0:23)
#define SB_SATA_REG8E           0x08E
#define SB_SATA_REG90           0x090   // PHY Port2 Control - Port0 PY fine tune (0:23)
#define SB_SATA_REG92           0x092
#define SB_SATA_REG94           0x094   // PHY Port3 Control - Port0 PY fine tune (0:23)
#define SB_SATA_REG96           0x096
#define SB_SATA_REG98           0x098   // EEPROM Memory Address - Command + Status - RW - 32 bits
#define SB_SATA_REG9C           0x09C   // EEPROM Memory Data - RW - 32 bits
#define SB_SATA_REGA0           0x0A0   //
#define SB_SATA_REGA4           0x0A4   //
#define SB_SATA_REGA5           0x0A5   //;
#define SB_SATA_REGA8           0x0A8   //
#define SB_SATA_REGAD           0x0AD   //;
#define SB_SATA_REGB0           0x0B0   // IDE1 Task File Configuration + Status - RW - 32 bits
#define SB_SATA_REGB5           0x0B5   //;
#define SB_SATA_REGBD           0x0BD   //;
#define SB_SATA_REGC0           0x0C0   // BA5 Indirect Address - RW - 32 bits
#define SB_SATA_REGC4           0x0C4   // BA5 Indirect Access - RW - 32 bits

#define SB_SATA_BAR5_REG00      0x000   // PCI Bus Master - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG04      0x004   // PRD Table Address - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG08      0x008   // PCI Bus Master - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG0C      0x00C   // PRD Table Address - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG10      0x010   // PCI Bus Master2 - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG18      0x018   // PCI Bus Master2 - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG20      0x020   // PRD Address - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG24      0x024   // PCI Bus Master Byte Count - IDE0- RW - 32 bits
#define SB_SATA_BAR5_REG28      0x028   // PRD Address - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG2C      0x02C   // PCI Bus Master Byte Count - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG40      0x040   // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG44      0x044   // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REG48      0x048   // System Configuration Status - Command - RW - 32 bits
#define SB_SATA_BAR5_REG4C      0x04C   // System Software Data Register - RW - 32 bits
#define SB_SATA_BAR5_REG50      0x050   // FLAS Memory Address - Command + Status - RW - 32 bits
#define SB_SATA_BAR5_REG54      0x054   // FLAS Memory Data - RW - 32 bits
#define SB_SATA_BAR5_REG58      0x058   // EEPROM Memory Address - Command + Status - RW - 32 bits
#define SB_SATA_BAR5_REG5C      0x05C   // EEPROM Memory Data - RW - 32 bits
#define SB_SATA_BAR5_REG60      0x060   // FIFO Port - IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG68      0x068   // FIFO Pointers1- IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG6C      0x06C   // FIFO Pointers2- IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REG70      0x070   // FIFO Port - IDE1- RW - 32 bits
#define SB_SATA_BAR5_REG78      0x078   // FIFO Pointers1- IDE1- RW - 32 bits
#define SB_SATA_BAR5_REG7C      0x07C   // FIFO Pointers2- IDE1- RW - 32 bits
#define SB_SATA_BAR5_REG80      0x080   // IDE0 Task File Register 0- RW - 32 bits
#define SB_SATA_BAR5_REG84      0x084   // IDE0 Task File Register 1- RW - 32 bits
#define SB_SATA_BAR5_REG88      0x088   // IDE0 Task File Register 2- RW - 32 bits
#define SB_SATA_BAR5_REG8C      0x08C   // IDE0 Read Data - RW - 32 bits
#define SB_SATA_BAR5_REG90      0x090   // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits
#define SB_SATA_BAR5_REG94      0x094   // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits
#define SB_SATA_BAR5_REG9C      0x09C   // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits
#define SB_SATA_BAR5_REGA0      0x0A0   // IDE0 Task File Configuration + Status - RW - 32 bits
#define SB_SATA_BAR5_REGB4      0x0B4   // Data Transfer Mode -IDE0 - RW - 32 bits
#define SB_SATA_BAR5_REGC0      0x0C0   // IDE1 Task File Register 0 - RW - 32 bits
#define SB_SATA_BAR5_REGC4      0x0C4   // IDE1 Task File Register 1 - RW - 32 bits
#define SB_SATA_BAR5_REGC8      0x0C8   // IDE1 Task File Register 2 - RW - 32 bits
#define SB_SATA_BAR5_REGCC      0x0CC   //  Read/Write Data - RW - 32 bits
#define SB_SATA_BAR5_REGD0      0x0D0   // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits
#define SB_SATA_BAR5_REGD4      0x0D4   // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits
#define SB_SATA_BAR5_REGDC      0x0DC   // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits
#define SB_SATA_BAR5_REGE0      0x0E0   // IDE1 Task File Configuration + Status - RW - 32 bits
#define SB_SATA_BAR5_REGF4      0x0F4   // Data Transfer Mode - IDE1 - RW - 32 bits
#define SB_SATA_BAR5_REGF8      0x0F8   // PORT Configuration
#define SB_SATA_BAR5_REGFC      0x0FC
#define SB_SATA_BAR5_REG100     0x0100  // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180
#define SB_SATA_BAR5_REG104     0x0104  // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel
#define SB_SATA_BAR5_REG108     0x0108  // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel
#define SB_SATA_BAR5_REG10C     0x010C  // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel
#define SB_SATA_BAR5_REG144     0x0144  // Serial ATA PY Configuration - RW - 32 bits
#define SB_SATA_BAR5_REG148     0x0148  // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)]
#define SB_SATA_BAR5_REG14C     0x014C  // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)]
#define SB_SATA_BAR5_REG120     0x0120  //
#define SB_SATA_BAR5_REG128     0x0128  // Port Serial ATA Status
#define SB_SATA_BAR5_REG12C     0x012C  // Port Serial ATA Control
#define SB_SATA_BAR5_REG130     0x0130
#define SB_SATA_BAR5_REG1B0     0x01B0
#define SB_SATA_BAR5_REG230     0x0230
#define SB_SATA_BAR5_REG2B0     0x02B0
#define SB_SATA_BAR5_REG330     0x0330
#define SB_SATA_BAR5_REG3B0     0x03B0

//
//  FC Device 0x439B
//  Device 17 (0x11) Func 1
//
#define SB_FC_REG00             0x00        // Device/Vendor ID - R
#define SB_FC_REG04             0x04        // Command - RW
#define SB_FC_REG10             0x10        // BAR

#define SB_FC_MMIO_REG70        0x070
#define SB_FC_MMIO_REG200       0x200

//
//  USB OHCI Device 0x4397
//  Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0
//  Device 20 (0x14) Func 5 (FL)
//
#define SB_OHCI_REG00           0x00        // Device/Vendor ID - R (0x43971002)
#define SB_OHCI_REG04           0x04        // Command - RW
#define SB_OHCI_REG06           0x06        // Status - R
#define SB_OHCI_REG08           0x08        // Revision ID/Class Code - R
#define SB_OHCI_REG0C           0x0C        // Miscellaneous - RW
#define SB_OHCI_REG10           0x10        // Bar_OCI - RW
#define SB_OHCI_REG2C           0x2C        // Subsystem Vendor ID/ Subsystem ID - RW
#define SB_OHCI_REG34           0x34        // Capability Pointer - R
#define SB_OHCI_REG3C           0x3C        // Interrupt Line - RW
#define SB_OHCI_REG3D           0x3D        // Interrupt Line - RW
#define SB_OHCI_REG40           0x40        // Config Timers - RW
#define SB_OHCI_REG42           0x42        // Port Disable Control - RW (800)
#define SB_OHCI_REG46           0x46        // USB PHY Battery Charger - RW (800)
#define SB_OHCI_REG48           0x48        // Port Force Reset - RW (800)
#define SB_OHCI_REG4C           0x4C        // MSI - RW   (800)
#define SB_OHCI_REG50           0x50        // Misc Control - RW
#define SB_OHCI_REG51           0x51
#define SB_OHCI_REG52           0x52
#define SB_OHCI_REG58           0x58        // Over Current Control - RW
#define SB_OHCI_REG5C           0x5C        // Over Current Control - RW  (800)??
#define SB_OHCI_REG60           0x60        // Serial Bus Release Number - R (800)??
#define SB_OHCI_REG68           0x68        // Over Current PME Enable - RW
#define SB_OHCI_REG74           0x74        // Target Timeout Control - RW (800)
#define SB_OHCI_REGD0           0x0D0       // MSI Control - RW
#define SB_OHCI_REGD4           0x0D4       // MSI Address - RW
#define SB_OHCI_REGD8           0x0D8       // MSI Data - RW
#define SB_OHCI_REGE4           0x0E4       // HT MSI Support
#define SB_OHCI_REGF0           0x0F0       // Function Level Reset Capability
#define SB_OHCI_REGF4           0x0F4       // Function Level Reset Control

#define SB_OHCI_BAR_REG00       0x00        // cRevision - R
#define SB_OHCI_BAR_REG04       0x04        // cControl
#define SB_OHCI_BAR_REG08       0x08        // cCommandStatus
#define SB_OHCI_BAR_REG0C       0x0C        // cInterruptStatus  RW
#define SB_OHCI_BAR_REG10       0x10        // cInterruptEnable
#define SB_OHCI_BAR_REG14       0x14        // cInterruptDisable
#define SB_OHCI_BAR_REG18       0x18        // HcCCA
#define SB_OHCI_BAR_REG1C       0x1C        // cPeriodCurrentED
#define SB_OHCI_BAR_REG20       0x20        // HcControleadED
#define SB_OHCI_BAR_REG24       0x24        // cControlCurrentED  RW
#define SB_OHCI_BAR_REG28       0x28        // HcBulkeadED
#define SB_OHCI_BAR_REG2C       0x2C        // cBulkCurrentED- RW
#define SB_OHCI_BAR_REG30       0x30        // HcDoneead
#define SB_OHCI_BAR_REG34       0x34        // cFmInterval
#define SB_OHCI_BAR_REG38       0x38        // cFmRemaining
#define SB_OHCI_BAR_REG3C       0x3C        // cFmNumber
#define SB_OHCI_BAR_REG40       0x40        // cPeriodicStart
#define SB_OHCI_BAR_REG44       0x44        // HcLSThresold
#define SB_OHCI_BAR_REG48       0x48        // HcRDescriptorA
#define SB_OHCI_BAR_REG4C       0x4C        // HcRDescriptorB
#define SB_OHCI_BAR_REG50       0x50        // HcRStatus
#define SB_OHCI_BAR_REG54       0x54        // HcRhPortStatus (800)
#define SB_OHCI_BAR_REG58       0x58        // HcRhPortStatus NPD (800)
#define SB_OHCI_BAR_REGF0       0xF0        // OHCI Loop Back feature Support (800)

//
//  USB EHCI Device 0x4396
//  Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2
//
#define SB_EHCI_REG00           0x00        // DEVICE/VENDOR ID - R
#define SB_EHCI_REG04           0x04        // Command - RW
#define SB_EHCI_REG06           0x06        // Status - R
#define SB_EHCI_REG08           0x08        // Revision ID/Class Code - R
#define SB_EHCI_REG0C           0x0C        // Miscellaneous - RW
#define SB_EHCI_REG10           0x10        // BAR - RW
#define SB_EHCI_REG2C           0x2C        // Subsystem ID/Subsystem Vendor ID - RW
#define SB_EHCI_REG34           0x34        // Capability Pointer - R
#define SB_EHCI_REG3C           0x3C        // Interrupt Line - RW
#define SB_EHCI_REG3D           0x3D        // Interrupt Line - RW ??
#define SB_EHCI_REG40           0x40        // Config Timers - RW ??
#define SB_EHCI_REG4C           0x4C        // MSI - RW
#define SB_EHCI_REG50           0x50        // EHCI Misc Control - RW
#define SB_EHCI_REG54           0x54        // EHCI Misc Control - RW
#define SB_EHCI_REG60           0x60        // SBRN - R
#define SB_EHCI_REG61           0x61        // FLADJ - RW
#define SB_EHCI_REG62           0x62        // PORTWAKECAP - RW
#define SB_EHCI_REGC0           0x0C0       // PME control - RW (800)
#define SB_EHCI_REGC4           0x0C4       // PME Data /Status - RW (800)
#define SB_EHCI_REGD0           0x0D0       // MSI Control - RW
#define SB_EHCI_REGD4           0x0D4       // MSI Address - RW
#define SB_EHCI_REGD8           0x0D8       // MSI Data - RW
#define SB_EHCI_REGE4           0x0E4       // EHCI Debug Port Support - RW (800)
#define SB_EHCI_REGF0           0x0F0       // Function Level Reset Capability - R (800)
#define SB_EHCI_REGF4           0x0F4       // Function Level Reset Capability - R (800)

#define SB_EHCI_BAR_REG00       0x00        // CAPLENGT - R
#define SB_EHCI_BAR_REG02       0x002       // CIVERSION- R
#define SB_EHCI_BAR_REG04       0x004       // CSPARAMS - R
#define SB_EHCI_BAR_REG08       0x008       // CCPARAMS - R
#define SB_EHCI_BAR_REG0C       0x00C       // CSP-PORTROUTE - R

#define SB_EHCI_BAR_REG20       0x020       // USBCMD - RW - 32 bits
#define SB_EHCI_BAR_REG24       0x024       // USBSTS - RW - 32 bits
#define SB_EHCI_BAR_REG28       0x028       // USBINTR -RW - 32 bits
#define SB_EHCI_BAR_REG2C       0x02C       // FRINDEX -RW - 32 bits
#define SB_EHCI_BAR_REG30       0x030       // CTRLDSSEGMENT -RW - 32 bits
#define SB_EHCI_BAR_REG34       0x034       // PERIODICLISTBASE -RW - 32 bits
#define SB_EHCI_BAR_REG38       0x038       // ASYNCLISTADDR -RW - 32 bits
#define SB_EHCI_BAR_REG60       0x060       // CONFIGFLAG -RW - 32 bits
#define SB_EHCI_BAR_REG64       0x064       // PORTSC (1-N_PORTS) -RW - 32 bits
#define SB_EHCI_BAR_REGA0       0x0A0       // DebugPort MISC Control - RW - 32 bits (800)
#define SB_EHCI_BAR_REGA4       0x0A4       // Packet Buffer Threshold Values - RW - 32 bits
#define SB_EHCI_BAR_REGA8       0x0A8       // USB PHY Status 0 - R
#define SB_EHCI_BAR_REGAC       0x0AC       // USB PHY Status 1 - R
#define SB_EHCI_BAR_REGB0       0x0B0       // USB PHY Status 2 - R
#define SB_EHCI_BAR_REGB4       0x0B4       // UTMI Control - RW (800)
#define SB_EHCI_BAR_REGB8       0x0B8       // Loopback Test
#define SB_EHCI_BAR_REGBC       0x0BC       // EHCI MISC Control
#define SB_EHCI_BAR_REGC0       0x0C0       // USB PHY Calibration
#define SB_EHCI_BAR_REGC4       0x0C4       // USB Common PHY Control
#define SB_EHCI_BAR_REGC8       0x0C8       // EHCI Debug Purpose
#define SB_EHCI_BAR_REGCC       0x0CC       // Ehci Spare 1 (800) **
#define SB_EHCI_BAR_REG100      0x100       // USB debug port

//
//  SB800 SB CFG device  0x4385
//  Device 20 (0x14) Func 0
//
#define SB_CFG_REG00            0x000       // VendorID - R
#define SB_CFG_REG02            0x002       // DeviceID - R
#define SB_CFG_REG04            0x004       // Command- RW
#define SB_CFG_REG05            0x005       // Command- RW
#define SB_CFG_REG06            0x006       // STATUS- RW
#define SB_CFG_REG08            0x008       // Revision ID/Class Code- R
#define SB_CFG_REG0A            0x00A       //
#define SB_CFG_REG0B            0x00B       //
#define SB_CFG_REG0C            0x00C       // Cache Line Size- R
#define SB_CFG_REG0D            0x00D       // Latency Timer- R
#define SB_CFG_REG0E            0x00E       // Header Type- R
#define SB_CFG_REG0F            0x00F       // BIST- R
#define SB_CFG_REG10            0x010       // Base Address 0- R
#define SB_CFG_REG11            0x011       //;
#define SB_CFG_REG12            0x012       //;
#define SB_CFG_REG13            0x013       //;
#define SB_CFG_REG14            0x014       // Base Address 1- R
#define SB_CFG_REG18            0x018       // Base Address 2- R
#define SB_CFG_REG1C            0x01C       // Base Address 3- R
#define SB_CFG_REG20            0x020       // Base Address 4- R
#define SB_CFG_REG24            0x024       // Base Address 5- R
#define SB_CFG_REG28            0x028       // Cardbus CIS Pointer- R
#define SB_CFG_REG2C            0x02C       // Subsystem Vendor ID- W
#define SB_CFG_REG2E            0x02E       // Subsystem ID- W
#define SB_CFG_REG30            0x030       // Expansion ROM Base Address - R
#define SB_CFG_REG34            0x034       // Capability Pointer - R  (800) default changed as 0x00
#define SB_CFG_REG3C            0x03C       // Interrupt Line - R
#define SB_CFG_REG3D            0x03D       // Interrupt Pin - R
#define SB_CFG_REG3E            0x03E       // Min_Gnt - R
#define SB_CFG_REG3F            0x03F       // Max_Lat - R
#define SB_CFG_REG90            0x090       // Smbus Base Address - R
#define SB_CFG_REG9C            0x09C       // SBResourceMMIO_BASE

//
//  SB800 SATA IDE device  0x439C
//  Device 20 (0x14) Func 1
//

#define SB_IDE_REG00            0x00        // Vendor ID
#define SB_IDE_REG02            0x02        // Device ID
#define SB_IDE_REG04            0x04        // Command
#define SB_IDE_REG06            0x06        // Status
#define SB_IDE_REG08            0x08        // Revision ID/Class Code
#define SB_IDE_REG09            0x09        // Class Code
#define SB_IDE_REG2C            0x2C        // Subsystem ID and Subsystem Vendor ID
#define SB_IDE_REG34            0x34
#define SB_IDE_REG40            0x40        // Configuration - RW - 32 bits
#define SB_IDE_REG62            0x62        // IDE Internal Control
#define SB_IDE_REG63            0x63        // IDE Internal Control
//
//  SB800 AZALIA device  0x4383
//  Device 20 (0x14) Func 2
//
#define ATI_AZALIA_ExtBlk_Addr          0x0F8
#define ATI_AZALIA_ExtBlk_DATA          0x0FC

#define SB_AZ_REG00             0x00        // Vendor ID - R
#define SB_AZ_REG02             0x02        // Device ID - R/W
#define SB_AZ_REG04             0x04        // PCI Command
#define SB_AZ_REG06             0x06        // PCI Status - R/W
#define SB_AZ_REG08             0x08        // Revision ID
#define SB_AZ_REG09             0x09        // Programming Interface
#define SB_AZ_REG0A             0x0A        // Sub Class Code
#define SB_AZ_REG0B             0x0B        // Base Class Code
#define SB_AZ_REG0C             0x0C        // Cache Line Size - R/W
#define SB_AZ_REG0D             0x0D        // Latency Timer
#define SB_AZ_REG0E             0x0E        // Header Type
#define SB_AZ_REG0F             0x0F        // BIST
#define SB_AZ_REG10             0x10        // Lower Base Address Register
#define SB_AZ_REG14             0x14        // Upper Base Address Register
#define SB_AZ_REG2C             0x2C        // Subsystem Vendor ID
#define SB_AZ_REG2D             0x2D        // Subsystem ID
#define SB_AZ_REG34             0x34        // Capabilities Pointer
#define SB_AZ_REG3C             0x3C        // Interrupt Line
#define SB_AZ_REG3D             0x3D        // Interrupt Pin
#define SB_AZ_REG3E             0x3E        // Minimum Grant
#define SB_AZ_REG3F             0x3F        // Maximum Latency
#define SB_AZ_REG40             0x40        // Misc Control 1
#define SB_AZ_REG42             0x42        // Misc Control 2 Register
#define SB_AZ_REG43             0x43        // Misc Control 3 Register
#define SB_AZ_REG44             0x44        // Interrupt Pin Control Register
#define SB_AZ_REG46             0x46        // Debug Control Register
#define SB_AZ_REG4C             0x4C
#define SB_AZ_REG50             0x50        // Power Management Capability ID
#define SB_AZ_REG52             0x52        // Power Management Capabilities
#define SB_AZ_REG54             0x54        // Power Management Control/Status
#define SB_AZ_REG60             0x60        // MSI Capability ID
#define SB_AZ_REG62             0x62        // MSI Message Control
#define SB_AZ_REG64             0x64        // MSI Message Lower Address
#define SB_AZ_REG68             0x68        // MSI Message Upper Address
#define SB_AZ_REG6C             0x6C        // MSI Message Data

#define SB_AZ_BAR_REG00         0x00        // Global Capabilities - R
#define SB_AZ_BAR_REG02         0x02        // Minor Version - R
#define SB_AZ_BAR_REG03         0x03        // Major Version - R
#define SB_AZ_BAR_REG04         0x04        // Output Payload Capability - R
#define SB_AZ_BAR_REG06         0x06        // Input Payload Capability - R
#define SB_AZ_BAR_REG08         0x08        // Global Control - R/W
#define SB_AZ_BAR_REG0C         0x0C        // Wake Enable - R/W
#define SB_AZ_BAR_REG0E         0x0E        // State Change Status - R/W
#define SB_AZ_BAR_REG10         0x10        // Global Status - R/W
#define SB_AZ_BAR_REG18         0x18        // Output Stream Payload Capability - R
#define SB_AZ_BAR_REG1A         0x1A        // Input Stream Payload Capability - R
#define SB_AZ_BAR_REG20         0x20        // Interrupt Control - R/W
#define SB_AZ_BAR_REG24         0x24        // Interrupt Status - R/W
#define SB_AZ_BAR_REG30         0x30        // Wall Clock Counter - R
#define SB_AZ_BAR_REG38         0x38        // Stream Synchronization - R/W
#define SB_AZ_BAR_REG40         0x40        // CORB Lower Base Address - R/W
#define SB_AZ_BAR_REG44         0x44        // CORB Upper Base Address - RW
#define SB_AZ_BAR_REG48         0x48        // CORB Write Pointer - R/W
#define SB_AZ_BAR_REG4A         0x4A        // CORB Read Pointer - R/W
#define SB_AZ_BAR_REG4C         0x4C        // CORB Control - R/W
#define SB_AZ_BAR_REG4D         0x4D        // CORB Status - R/W
#define SB_AZ_BAR_REG4E         0x4E        // CORB Size - R/W
#define SB_AZ_BAR_REG50         0x50        // RIRB Lower Base Address - RW
#define SB_AZ_BAR_REG54         0x54        // RIRB Upper Address - RW
#define SB_AZ_BAR_REG58         0x58        // RIRB Write Pointer - RW
#define SB_AZ_BAR_REG5A         0x5A        // RIRB Response Interrupt Count - R/W
#define SB_AZ_BAR_REG5C         0x5C        // RIRB Control - R/W
#define SB_AZ_BAR_REG5D         0x5D        // RIRB Status - R/W
#define SB_AZ_BAR_REG5E         0x5E        // RIRB Size - R/W
#define SB_AZ_BAR_REG60         0x60        // Immediate Command Output Interface - R/W
#define SB_AZ_BAR_REG64         0x64        // Immediate Command Input Interface - R/W
#define SB_AZ_BAR_REG68         0x68        // Immediate Command Input Interface - R/W
#define SB_AZ_BAR_REG70         0x70        // DMA Position Lower Base Address - R/W
#define SB_AZ_BAR_REG74         0x74        // DMA Position Upper Base Address - R/W
#define SB_AZ_BAR_REG2030       0x2030      // Wall Clock Counter Alias - R

//
//  SB800 LPC Device  0x439D
//  Device 20 (0x14) Func 3
//
#define SB_LPC_REG00            0x00        // VID- R
#define SB_LPC_REG02            0x02        // DID- R
#define SB_LPC_REG04            0x04        // CMD- RW
#define SB_LPC_REG06            0x06        // STATUS- RW
#define SB_LPC_REG08            0x08        // Revision  ID/Class Code - R
#define SB_LPC_REG0C            0x0C        // Cache Line Size - R
#define SB_LPC_REG0D            0x0D        // Latency Timer - R
#define SB_LPC_REG0E            0x0E        // Header Type - R
#define SB_LPC_REG0F            0x0F        // BIST- R
#define SB_LPC_REG10            0x10        // Base Address Reg 0- RW*
#define SB_LPC_REG2C            0x2C        // Subsystem ID & Subsystem Vendor ID - Wo/Ro
#define SB_LPC_REG34            0x34        // Capabilities Pointer - Ro
#define SB_LPC_REG40            0x40        // PCI Control - RW
#define SB_LPC_REG44            0x44        // IO Port Decode Enable Register 1- RW
#define SB_LPC_REG45            0x45        // IO Port Decode Enable Register 2- RW
#define SB_LPC_REG46            0x46        // IO Port Decode Enable Register 3- RW
#define SB_LPC_REG47            0x47        // IO Port Decode Enable Register 4- RW
#define SB_LPC_REG48            0x48        // IO/Mem Port Decode Enable Register 5- RW
#define SB_LPC_REG49            0x49        // LPC Sync Timeout Count - RW
#define SB_LPC_REG4A            0x4A        // IO/Mem Port Decode Enable Register 6- RW
#define SB_LPC_REG4C            0x4C        // Memory Range Register - RW
#define SB_LPC_REG50            0x50        // Rom Protect 0 - RW
#define SB_LPC_REG54            0x54        // Rom Protect 1 - RW
#define SB_LPC_REG58            0x58        // Rom Protect 2 - RW
#define SB_LPC_REG5C            0x5C        // Rom Protect 3 - RW
#define SB_LPC_REG60            0x60        // PCI Memory Start Address of LPC Target Cycles -
#define SB_LPC_REG62            0x62        // PCI Memory End Address of LPC Target Cycles -
#define SB_LPC_REG64            0x64        // PCI IO base Address of Wide Generic Port - RW
#define SB_LPC_REG65            0x65
#define SB_LPC_REG66            0x66
#define SB_LPC_REG67            0x67
#define SB_LPC_REG68            0x68        // LPC ROM Address Range 1 (Start Address) - RW
#define SB_LPC_REG69            0x69
#define SB_LPC_REG6A            0x6A        // LPC ROM Address Range 1 (End Address) - RW
#define SB_LPC_REG6B            0x6B
#define SB_LPC_REG6C            0x6C        // LPC ROM Address Range 2 (Start Address)- RW
#define SB_LPC_REG6D            0x6D
#define SB_LPC_REG6E            0x6E        // LPC ROM Address Range 2 (End Address) - RW
#define SB_LPC_REG6F            0x6F
#define SB_LPC_REG70            0x70        // Firmware ub Select - RW*
#define SB_LPC_REG71            0x71
#define SB_LPC_REG72            0x72
#define SB_LPC_REG73            0x73
#define SB_LPC_REG74            0x74        // Alternative Wide IO Range Enable- W/R
#define SB_LPC_REG78            0x78        // Miscellaneous Control Bits- W/R
#define SB_LPC_REG7C            0x7C        // TPM (trusted plant form module) reg- W/R
#define SB_LPC_REG9C            0x9C
#define SB_LPC_REG80            0x80        // MSI Capability Register- R
#define SB_LPC_REGA0            0x0A0       // SPI base address
#define SB_LPC_REGA1            0x0A1       // SPI base address
#define SB_LPC_REGA2            0x0A2       // SPI base address
#define SB_LPC_REGA3            0x0A3       // SPI base address
#define SB_LPC_REGA4            0x0A4
#define SB_LPC_REGBA            0x0BA       // EcControl
#define SB_LPC_REGBB            0x0BB       // HostControl

//
//  SB800 PCIB  0x4384
//  Device 20 (0x14) Func 4
//
#define SB_PCIB_REG04            0x04       // Command
#define SB_PCIB_REG0D            0x0D       // Primary Master Latency Timer
#define SB_PCIB_REG1B            0x1B       // Secondary Latency Timer
#define SB_PCIB_REG1C            0x1C       // IO Base
#define SB_PCIB_REG1D            0x1D       // IO Limit
#define SB_PCIB_REG40            0x40       // CPCTRL
#define SB_PCIB_REG42            0x42       // CLKCTRL
#define SB_PCIB_REG48            0x48       //
#define SB_PCIB_REG4A            0x4A       // PCICLK Enable Bits
#define SB_PCIB_REG4B            0x4B       // Misc Control
#define SB_PCIB_REG4C            0x4C       // AutoClockRun Control
#define SB_PCIB_REG50            0x50       // Dual Address Cycle Enable and PCIB_CLK_Stop Override
#define SB_PCIB_REG65            0x65       // Misc Control
#define SB_PCIB_REG66            0x66       // Misc Control
//
//  SB800 NIC 0x4384
//  Device 20 (0x14) Func 6     (Func5 OHCI FL device)
//
#define SB_GEC_REG04             0x04       // Command
#define SB_GEC_REG10             0x10       // GEC BAR

//
//  SB800 SB MMIO Base (SMI)
//    offset : 0x200
//
#define SB_SMI_REG00            0x00         // EventStatus
#define SB_SMI_REG04            0x04         // EventEnable
#define SB_SMI_REG08            0x08         // SciTrig
#define SB_SMI_REG0C            0x0C         // SciLevl
#define SB_SMI_REG10            0x10         // SmiSciStatus
#define SB_SMI_REG14            0x14         // SmiSciEn
#define SB_SMI_REG18            0x18         // ForceSciEn
#define SB_SMI_REG1C            0x1C         // SciRwData
#define SB_SMI_REG20            0x20         // SciS0En
#define SB_SMI_Gevent0          0x40         // SciMap0
#define SB_SMI_Gevent1          0x41         // SciMap1
#define SB_SMI_Gevent2          0x42         // SciMap2
#define SB_SMI_Gevent3          0x43         // SciMap3
#define SB_SMI_Gevent4          0x44         // SciMap4
#define SB_SMI_Gevent5          0x45         // SciMap5
#define SB_SMI_Gevent6          0x46         // SciMap6
#define SB_SMI_Gevent7          0x47         // SciMap7
#define SB_SMI_Gevent8          0x48         // SciMap8
#define SB_SMI_Gevent9          0x49         // SciMap9
#define SB_SMI_Gevent10         0x4A         // SciMap10
#define SB_SMI_Gevent11         0x4B         // SciMap11
#define SB_SMI_Gevent12         0x4C         // SciMap12
#define SB_SMI_Gevent13         0x4D         // SciMap13
#define SB_SMI_Gevent14         0x4E         // SciMap14
#define SB_SMI_Gevent15         0x4F         // SciMap15
#define SB_SMI_Gevent16         0x50         // SciMap16
#define SB_SMI_Gevent17         0x51         // SciMap17
#define SB_SMI_Gevent18         0x52         // SciMap18
#define SB_SMI_Gevent19         0x53         // SciMap19
#define SB_SMI_Gevent20         0x54         // SciMap20
#define SB_SMI_Gevent21         0x55         // SciMap21
#define SB_SMI_Gevent22         0x56         // SciMap22
#define SB_SMI_Gevent23         0x57         // SciMap23
#define SB_SMI_Usbwakup0        0x58         // SciMap24
#define SB_SMI_Usbwakup1        0x59         // SciMap25
#define SB_SMI_Usbwakup2        0x5A         // SciMap26
#define SB_SMI_Usbwakup3        0x5B         // SciMap27
#define SB_SMI_SBGppPme0        0x5C         // SciMap28
#define SB_SMI_SBGppPme1        0x5D         // SciMap29
#define SB_SMI_SBGppPme2        0x5E         // SciMap30
#define SB_SMI_SBGppPme3        0x5F         // SciMap31
#define SB_SMI_SBGppHp0         0x60         // SciMap32
#define SB_SMI_SBGppHp1         0x61         // SciMap33
#define SB_SMI_SBGppHp2         0x62         // SciMap34
#define SB_SMI_SBGppHp3         0x63         // SciMap35
#define SB_SMI_AzaliaPme        0x64         // SciMap36
#define SB_SMI_SataGevent0      0x65         // SciMap37
#define SB_SMI_SataGevent1      0x66         // SciMap38
#define SB_SMI_GecPme           0x67         // SciMap39
#define SB_SMI_IMCGevent0       0x68         // SciMap40
#define SB_SMI_IMCGevent1       0x69         // SciMap41
#define SB_SMI_CIRPme           0x6A         // SciMap42
#define SB_SMI_WakePinGevent    0x6B         // SciMap43
#define SB_SMI_FanThGevent      0x6C         // SciMap44    //FanThermalGevent
#define SB_SMI_ASFMasterIntr    0x6D         // SciMap45
#define SB_SMI_ASFSlaveIntr     0x6E         // SciMap46
#define SB_SMI_SMBUS0           0x6F         // SciMap47
#define SB_SMI_TWARN            0x70         // SciMap48
#define SB_SMI_TMI              0x71         // SciMap49    // TrafficMonitorIntr

// Empty from 0x72-0x7F
//#Define SB_SMI_REG7C            0x7F         // SciMap63  ***

#define SB_SMI_REG80            0x80         //  SmiStatus0
#define SB_SMI_REG84            0x84         // SmiStatus1
#define SB_SMI_REG88            0x88         // SmiStatus2
#define SB_SMI_REG8C            0x8C         // SmiStatus3
#define SB_SMI_REG90            0x90         // SmiStatus4
#define SB_SMI_REG94            0x94         // SmiPointer
#define SB_SMI_REG96            0x96         // SmiTimer
#define SB_SMI_REG98            0x98         // SmiTrig
#define SB_SMI_REG9C            0x9C         // SmiTrig
#define SB_SMI_REGA0            0xA0
#define SB_SMI_REGA1            0xA1
#define SB_SMI_REGA2            0xA2
#define SB_SMI_REGA3            0xA3
#define SB_SMI_REGA4            0xA4
#define SB_SMI_REGA5            0xA5
#define SB_SMI_REGA6            0xA6
#define SB_SMI_REGA7            0xA7
#define SB_SMI_REGA8            0xA8
#define SB_SMI_REGA9            0xA9
#define SB_SMI_REGAA            0xAA
#define SB_SMI_REGAB            0xAB
#define SB_SMI_REGAC            0xAC
#define SB_SMI_REGAD            0xAD
#define SB_SMI_REGAE            0xAE
#define SB_SMI_REGAF            0xAF
#define SB_SMI_REGB0            0xB0
#define SB_SMI_REGB1            0xB1
#define SB_SMI_REGB2            0xB2
#define SB_SMI_REGB3            0xB3
#define SB_SMI_REGB4            0xB4
#define SB_SMI_REGB5            0xB5
#define SB_SMI_REGB6            0xB6
#define SB_SMI_REGB7            0xB7
#define SB_SMI_REGB8            0xB8
#define SB_SMI_REGB9            0xB9
#define SB_SMI_REGBA            0xBA
#define SB_SMI_REGBB            0xBB
#define SB_SMI_REGBC            0xBC
#define SB_SMI_REGBD            0xBD
#define SB_SMI_REGBE            0xBE
#define SB_SMI_REGBF            0xBF
#define SB_SMI_REGC0            0xC0
#define SB_SMI_REGC1            0xC1
#define SB_SMI_REGC2            0xC2
#define SB_SMI_REGC3            0xC3
#define SB_SMI_REGC4            0xC4
#define SB_SMI_REGC5            0xC5
#define SB_SMI_REGC6            0xC6
#define SB_SMI_REGC7            0xC7
#define SB_SMI_REGC8            0xC8
#define SB_SMI_REGCA            0xCA         //  IoTrapping1
#define SB_SMI_REGCC            0xCC         //  IoTrapping2
#define SB_SMI_REGCE            0xCE         //  IoTrapping3
#define SB_SMI_REGD0            0xD0         //  MemTrapping0
#define SB_SMI_REGD4            0xD4         //  MemRdOvrData0
#define SB_SMI_REGD8            0xD8         //  MemTrapping1
#define SB_SMI_REGDC            0xDC         //  MemRdOvrData1
#define SB_SMI_REGE0            0xE0         //  MemTrapping2
#define SB_SMI_REGE4            0xE4         //  MemRdOvrData2
#define SB_SMI_REGE8            0xE8         //  MemTrapping3
#define SB_SMI_REGEC            0xEC         //  MemRdOvrData3
#define SB_SMI_REGF0            0xF0         //  CfgTrapping0
#define SB_SMI_REGF4            0xF4         //  CfgTrapping1
#define SB_SMI_REGF8            0xF8         //  CfgTrapping2
#define SB_SMI_REGFC            0xFC         //  CfgTrapping3

//
//  SB800 SB MMIO Base (PMIO)
//    offset : 0x300
//
#define SB_PMIOA_REG00          0x00        // ISA Decode
#define SB_PMIOA_REG04          0x04        // ISA Control
#define SB_PMIOA_REG08          0x08        // PCI Control
#define SB_PMIOA_REG0C          0x0C        // StpClkSmaf
#define SB_PMIOA_REG10          0x10        // RetryDetect
#define SB_PMIOA_REG14          0x14        // StuckDetect
#define SB_PMIOA_REG20          0x20        // BiosRamEn
#define SB_PMIOA_REG24          0x24        //  AcpiMmioEn
#define SB_PMIOA_REG28          0x28         // AsfEn
#define SB_PMIOA_REG2C          0x2C         // Smbus0En
#define SB_PMIOA_REG34          0x34         // IoApicEn
#define SB_PMIOA_REG3C          0x3C         // SmartVoltEn
#define SB_PMIOA_REG40          0x40         // SmartVolt2En
#define SB_PMIOA_REG44          0x44         // BootTimerEn
#define SB_PMIOA_REG48          0x48         // WatchDogTimerEn
#define SB_PMIOA_REG4C          0x4C         // WatchDogTimerConfig
#define SB_PMIOA_REG50          0x50         // HPETEn
#define SB_PMIOA_REG54          0x54         // SerialIrqConfig
#define SB_PMIOA_REG56          0x56         // RtcControl
#define SB_PMIOA_REG58          0x58         // VRT_T1
#define SB_PMIOA_REG59          0x59         // VRT_T2
#define SB_PMIOA_REG5A          0x5A         // IntruderControl
#define SB_PMIOA_REG5B          0x5B         // RtcShadow
#define SB_PMIOA_REG5C          0x5C
#define SB_PMIOA_REG5D          0x5D
#define SB_PMIOA_REG5E          0x5E         // RtcExtIndex
#define SB_PMIOA_REG5F          0x5F         // RtcExtData
#define SB_PMIOA_REG60          0x60         // AcpiPm1EvtBlk
#define SB_PMIOA_REG62          0x62         // AcpiPm1CntBlk
#define SB_PMIOA_REG64          0x64         // AcpiPmTmrBlk
#define SB_PMIOA_REG66          0x66         // P_CNTBlk
#define SB_PMIOA_REG68          0x68         // AcpiGpe0Blk
#define SB_PMIOA_REG6A          0x6A         // AcpiSmiCmd
#define SB_PMIOA_REG6C          0x6C         // AcpiPm2CntBlk
#define SB_PMIOA_REG6E          0x6E         // AcpiPmaCntBlk
#define SB_PMIOA_REG74          0x74         // AcpiConfig
#define SB_PMIOA_REG78          0x78         // WakeIoAddr
#define SB_PMIOA_REG7A          0x7A         // HaltCountEn
#define SB_PMIOA_REG7C          0x7C         // C1eWrPortAdr
#define SB_PMIOA_REG7E          0x7E         // CStateEn
#define SB_PMIOA_REG80          0x80         // BreakEvent
#define SB_PMIOA_REG84          0x84         // AutoArbEn
#define SB_PMIOA_REG88          0x88         // CStateControl
#define SB_PMIOA_REG8C          0x8C         // StpClkHoldTime
#define SB_PMIOA_REG8E          0x8E         // PopUpEndTime
#define SB_PMIOA_REG90          0x90         // C4Control
#define SB_PMIOA_REG94          0x94         // CStateTiming0
#define SB_PMIOA_REG98          0x98         // CStateTiming1
#define SB_PMIOA_REG9C          0x9C         // C2Count
#define SB_PMIOA_REG9D          0x9D         // C3Count
#define SB_PMIOA_REG9E          0x9E         // C4Count
#define SB_PMIOA_REGA0          0xA0         // MessageCState
#define SB_PMIOA_REGA4          0xA4         //
#define SB_PMIOA_REGA8          0xA8         // TrafficMonitorIdleTime
#define SB_PMIOA_REGAA          0xAA         // TrafficMonitorIntTime
#define SB_PMIOA_REGAC          0xAC         // TrafficMonitorTrafficCount
#define SB_PMIOA_REGAE          0xAE         // TrafficMonitorIntrCount
#define SB_PMIOA_REGB0          0xB0         // TrafficMonitorTimeTick
#define SB_PMIOA_REGB4          0xB4         // FidVidControl
#define SB_PMIOA_REGB6          0xB6         // TPRESET1
#define SB_PMIOA_REGB7          0xB7         // Tpreset1b
#define SB_PMIOA_REGB8          0xB8         // TPRESET2
#define SB_PMIOA_REGB9          0xB9         // Test0
#define SB_PMIOA_REGBA          0xBA         // S_StateControl
#define SB_PMIOA_REGBC          0xBC         // ThrottlingControl
#define SB_PMIOA_REGBE          0xBE         // ResetControl
#define SB_PMIOA_REGBF          0xBF         // ResetControl
#define SB_PMIOA_REGC0          0xC0         // S5Status
#define SB_PMIOA_REGC2          0xC2         // ResetStatus
#define SB_PMIOA_REGC4          0xC4         // ResetCommand
#define SB_PMIOA_REGC5          0xC5         // CF9Shadow
#define SB_PMIOA_REGC6          0xC6         // HTControl
#define SB_PMIOA_REGC8          0xC8         // Misc
#define SB_PMIOA_REGCC          0xCC         // IoDrvSth
#define SB_PMIOA_REGD0          0xD0         // CLKRunEn
#define SB_PMIOA_REGD2          0xD2         // PmioDebug
#define SB_PMIOA_REGD6          0xD6         // IMCGating
#define SB_PMIOA_REGD8          0xD8         // MiscIndex
#define SB_PMIOA_REGD9          0xD9         // MiscData
#define SB_PMIOA_REGDA          0xDA         // SataConfig
#define SB_PMIOA_REGDC          0xDC         // HyperFlashConfig
#define SB_PMIOA_REGDE          0xDE         // ABConfig
#define SB_PMIOA_REGE0          0xE0         // ABRegBar
#define SB_PMIOA_REGE6          0xE6         // FcEn
#define SB_PMIOA_REGEA          0xEA         // PcibConfig
#define SB_PMIOA_REGEB          0xEB         // AzEn
#define SB_PMIOA_REGEC          0xEC         // LpcGating
#define SB_PMIOA_REGED          0xED         // UsbGating
#define SB_PMIOA_REGEF          0xEF         // UsbEnable
#define SB_PMIOA_REGF0          0xF0         // UsbControl
#define SB_PMIOA_REGF3          0xF3         // UsbDebug
#define SB_PMIOA_REGF6          0xF6         // GecEn
#define SB_PMIOA_REGF8          0xF8         // GecConfig
#define SB_PMIOA_REGFC          0xFC         // TraceMemoryEn

//
//  SB800 SB MMIO Base (PMIO2)
//    offset : 0x400
//
#define SB_PMIO2_REG00          0x00        // Fan0InputControl
#define SB_PMIO2_REG01          0x01        // Fan0Control
#define SB_PMIO2_REG02          0x02        // Fan0Freq
#define SB_PMIO2_REG03          0x03        // LowDuty0
#define SB_PMIO2_REG04          0x04        // MidDuty0

#define SB_PMIO2_REG10          0x00        // Fan1InputControl
#define SB_PMIO2_REG11          0x01        // Fan1Control
#define SB_PMIO2_REG12          0x02        // Fan1Freq
#define SB_PMIO2_REG13          0x03        // LowDuty1
#define SB_PMIO2_REG14          0x04        // MidDuty1

#define SB_PMIO2_REG          0xFC         // TraceMemoryEn


//
//  SB800 SB MMIO Base (GPIO/IoMux)
//    offset : 0x100/0xD00
//
/*
GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226.
*/
#define SB_GPIO_REG00           0x00
#define SB_GPIO_REG32           0x20
#define SB_GPIO_REG33           0x21
#define SB_GPIO_REG34           0x22
#define SB_GPIO_REG35           0x23
#define SB_GPIO_REG36           0x24
#define SB_GPIO_REG37           0x25
#define SB_GPIO_REG38           0x26
#define SB_GPIO_REG39           0x27
#define SB_GPIO_REG40           0x28
#define SB_GPIO_REG41           0x29
#define SB_GPIO_REG42           0x2A
#define SB_GPIO_REG43           0x2B
#define SB_GPIO_REG44           0x2C
#define SB_GPIO_REG45           0x2D
#define SB_GPIO_REG46           0x2E
#define SB_GPIO_REG47           0x2F
#define SB_GPIO_REG48           0x30
#define SB_GPIO_REG49           0x31
#define SB_GPIO_REG50           0x32
#define SB_GPIO_REG51           0x33
#define SB_GPIO_REG52           0x34
#define SB_GPIO_REG53           0x35
#define SB_GPIO_REG54           0x36
#define SB_GPIO_REG55           0x37
#define SB_GPIO_REG56           0x38
#define SB_GPIO_REG57           0x39
#define SB_GPIO_REG58           0x3A
#define SB_GPIO_REG59           0x3B
#define SB_GPIO_REG60           0x3C
#define SB_GPIO_REG61           0x3D
#define SB_GPIO_REG62           0x3E
#define SB_GPIO_REG63           0x3F
#define SB_GPIO_REG64           0x40
#define SB_GPIO_REG65           0x41
#define SB_GPIO_REG66           0x42
#define SB_GPIO_REG67           0x43

#define SB_GEVENT_REG00         0x60
#define SB_GEVENT_REG01         0x61
#define SB_GEVENT_REG02         0x62
#define SB_GEVENT_REG03         0x63
#define SB_GEVENT_REG04         0x64
#define SB_GEVENT_REG05         0x65
#define SB_GEVENT_REG06         0x66
#define SB_GEVENT_REG07         0x67
#define SB_GEVENT_REG08         0x68
#define SB_GEVENT_REG09         0x69
#define SB_GEVENT_REG10         0x6A
#define SB_GEVENT_REG11         0x6B
#define SB_GEVENT_REG12         0x6C
#define SB_GEVENT_REG13         0x6D
#define SB_GEVENT_REG14         0x6E
#define SB_GEVENT_REG15         0x6F
#define SB_GEVENT_REG16         0x70
#define SB_GEVENT_REG17         0x71
#define SB_GEVENT_REG18         0x72
#define SB_GEVENT_REG19         0x73
#define SB_GEVENT_REG20         0x74
#define SB_GEVENT_REG21         0x75
#define SB_GEVENT_REG22         0x76
#define SB_GEVENT_REG23         0x77
// S5-DOMAIN GPIO
#define SB_GPIO_REG160          0xA0
#define SB_GPIO_REG161          0xA1
#define SB_GPIO_REG162          0xA2
#define SB_GPIO_REG163          0xA3
#define SB_GPIO_REG164          0xA4
#define SB_GPIO_REG165          0xA5
#define SB_GPIO_REG166          0xA6
#define SB_GPIO_REG167          0xA7
#define SB_GPIO_REG168          0xA8
#define SB_GPIO_REG169          0xA9
#define SB_GPIO_REG170          0xAA
#define SB_GPIO_REG171          0xAB
#define SB_GPIO_REG172          0xAC
#define SB_GPIO_REG173          0xAD
#define SB_GPIO_REG174          0xAE
#define SB_GPIO_REG175          0xAF
#define SB_GPIO_REG176          0xB0
#define SB_GPIO_REG177          0xB1
#define SB_GPIO_REG178          0xB2
#define SB_GPIO_REG179          0xB3
#define SB_GPIO_REG180          0xB4
#define SB_GPIO_REG181          0xB5
#define SB_GPIO_REG182          0xB6
#define SB_GPIO_REG183          0xB7
#define SB_GPIO_REG184          0xB8
#define SB_GPIO_REG185          0xB9
#define SB_GPIO_REG186          0xBA
#define SB_GPIO_REG187          0xBB
#define SB_GPIO_REG188          0xBC
#define SB_GPIO_REG189          0xBD
#define SB_GPIO_REG190          0xBE
#define SB_GPIO_REG191          0xBF
#define SB_GPIO_REG192          0xC0
#define SB_GPIO_REG193          0xC1
#define SB_GPIO_REG194          0xC2
#define SB_GPIO_REG195          0xC3
#define SB_GPIO_REG196          0xC4
#define SB_GPIO_REG197          0xC5
#define SB_GPIO_REG198          0xC6
#define SB_GPIO_REG199          0xC7
#define SB_GPIO_REG200          0xC8
#define SB_GPIO_REG201          0xC9
#define SB_GPIO_REG202          0xCA
#define SB_GPIO_REG203          0xCB
#define SB_GPIO_REG204          0xCC
#define SB_GPIO_REG205          0xCD
#define SB_GPIO_REG206          0xCE
#define SB_GPIO_REG207          0xCF
#define SB_GPIO_REG208          0xD0
#define SB_GPIO_REG209          0xD1
#define SB_GPIO_REG210          0xD2
#define SB_GPIO_REG211          0xD3
#define SB_GPIO_REG212          0xD4
#define SB_GPIO_REG213          0xD5
#define SB_GPIO_REG214          0xD6
#define SB_GPIO_REG215          0xD7
#define SB_GPIO_REG216          0xD8
#define SB_GPIO_REG217          0xD9
#define SB_GPIO_REG218          0xDA
#define SB_GPIO_REG219          0xDB
#define SB_GPIO_REG220          0xDC
#define SB_GPIO_REG221          0xDD
#define SB_GPIO_REG222          0xDE
#define SB_GPIO_REG223          0xDF
#define SB_GPIO_REG224          0xF0
#define SB_GPIO_REG225          0xF1
#define SB_GPIO_REG226          0xF2
#define SB_GPIO_REG227          0xF3
#define SB_GPIO_REG228          0xF4

//
//  SB800 SB MMIO Base (SMBUS)
//    offset : 0xA00
//
#define SB_SMBUS_REG12           0x12        //   I2CbusConfig

//
//  SB800 SB MMIO Base (MISC)
//    offset : 0xE00
//
#define SB_MISC_REG00           0x00        //  ClkCntrl0
/*
SB_MISC_REG00                   EQU     000h
  ClkCntrl0                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG04           0x04        //  ClkCntrl1
/*
SB_MISC_REG04                   EQU     004h
  ClkCntrl1                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG08           0x08        //  ClkCntrl2
/*
SB_MISC_REG08                   EQU     008h
  ClkCntrl2                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG0C           0x0C        //  ClkCntrl3
/*
SB_MISC_REG0C                   EQU     00Ch
  ClkCntrl3                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG10           0x10        //  ClkCntrl4
/*
SB_MISC_REG10                   EQU     010h
  ClkCntrl4                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG14           0x14        //   ClkCntrl5
/*
SB_MISC_REG14                   EQU     014h
  ClkCntrl5                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG18           0x18        //   ClkCntrl6
/*
SB_MISC_REG18                   EQU     018h
  ClkCntrl6                   EQU     0FFFFFFFFh
*/
#define SB_MISC_REG30           0x30         // OscFreqCounter
/*
SB_MISC_REG30                   EQU     030h
  OscCounter                  EQU     0FFFFFFFFh                  ; The 32bit register shows the number of OSC clock per second.
*/
#define SB_MISC_REG34           0x34         //  HpetClkPeriod
/*
SB_MISC_REG34                   EQU     034h
  HpetClkPeriod               EQU     0FFFFFFFFh                  ; default - 0x429B17Eh (14.31818M).
*/
#define SB_MISC_REG40           0x40         //  MiscCntrl      for clock only
/*
SB_MISC_REG40                   EQU     040h
*/

#define SB_MISC_REG80           0x80        /**< SB_MISC_REG80
                                   *   @par
                                   *   StrapStatus [15.0] - SB800 chip Strap Status
                                   *    @li <b>0001</b> - Not USED FWH
                                   *    @li <b>0002</b> - Not USED LPC ROM
                                   *    @li <b>0004</b> - EC enabled
                                   *    @li <b>0008</b> - Reserved
                                   *    @li <b>0010</b> - Internal Clock mode
                                   */

#define  ChipSysNotUseFWHRom    0x0001                            // EcPwm3 pad
#define  ChipSysNotUseLpcRom    0x0002                            // Inverted version from EcPwm2 pad (default - 1)
                                                                  // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type.
#define  ChipSysEcEnable        0x0004                            // Enable Embedded Controller (EC)
#define  ChipSysBootFailTmrEn   0x0008                            // Enable Watchdog function
#define  ChipSysIntClkGen       0x0010                            // Select 25Mhz crystal clock or 100Mhz PCI-E clock **

#define SB_MISC_REG84           0x84         //  StrapOverride
/*
SB_MISC_REG84                   EQU     084h
  Override FWHDisableStrap    EQU     BIT0                        ; Override FWHDiableStrap value from external pin.
  Override UseLpcRomStrap     EQU     BIT1                        ; Override UseLpcRomStrap value from external pin.
  Override EcEnableStrap      EQU     BIT2                        ; Override EcEnableStrap value from external pin.
  Override BootFailTmrEnStrap EQU     BIT3                        ; Override BootFailTmrEnStrap value from external pin.
  Override DefaultModeStrap   EQU     BIT5                        ; Override DefaultModeStrap value from external pin.
  Override I2CRomStrap        EQU     BIT7                        ; Override I2CRomStrap value from external pin.
  Override ILAAutorunEnBStrap EQU     BIT8                        ; Override ILAAutorunEnBStrap value from external pin.
  Override FcPllBypStrap      EQU     BIT9                        ; Override FcPllBypStrap value from external pin.
  Override PciPllBypStrap     EQU     BIT10                       ; Override PciPllBypStrap value from external pin.
  Override ShortResetStrap    EQU     BIT11                       ; Override ShortResetStrap value from external pin.
  Override FastBif2ClkStrap   EQU     BIT13                       ; Override FastBif2ClkStrap value from external pin'
  PciRomBootStrap             EQU     BIT15                       ; Override PCI Rom Boot Strap value from external pin ?? Not match 0x80 reg ??
  BlinkSlowModestrap          EQU     BIT16                       ; Override Blink Slow mode (100Mhz) from external pin'
  ClkGenStrap                 EQU     BIT17                       ; Override CLKGEN from external pin.
  BIF_GEN2_COMPL_Strap        EQU     BIT18                       ; Override BIF_ GEN2_COMPLIANCE strap from external pin.
  StrapOverrideEn             EQU     BIT31                       ; Enable override strapping feature.
*/
#define SB_MISC_REGC0           0xC0        //  CPU_Pstate0
/*
SB_MISC_REGC0                   EQU     0C0h
  Core0_PState                EQU     BIT0+BIT1+BIT2              ; 000: P0  001: P1  010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
  Core1_PState                EQU     BIT4+BIT5+BIT6
  Core2_PState                EQU     BIT8+BIT9+BIT10
  Core3_PState                EQU     BIT12+BIT13+BIT14
  Core4_PState                EQU     BIT16++BIT17+BIT18
  Core5_PState                EQU     BIT20+BIT21+BIT22
  Core6_PState                EQU     BIT24+BIT25+BIT26
  Core7_PState                EQU     BIT28+BIT29+BIT30
*/
#define SB_MISC_REGC4           0xC4         //  CPU_Pstate1
/*
SB_MISC_REGC4                   EQU     0C4h
  Core8_PState                EQU     BIT0+BIT1+BIT2              ; 000: P0  001: P1  010: P2 011: P3 100: P4 101: P5 110: P6 111: P7
  Core9_PState                EQU     BIT4+BIT5+BIT6
  Core10_PState               EQU     BIT8+BIT9+BIT10
  Core11_PState               EQU     BIT12+BIT13+BIT14
  Core12_PState               EQU     BIT16++BIT17+BIT18
  Core13_PState               EQU     BIT20+BIT21+BIT22
  Core14_PState               EQU     BIT24+BIT25+BIT26
  Core15_PState               EQU     BIT28+BIT29+BIT30
*/
#define SB_MISC_REGD0           0xD0         //  CPU_Cstate0
/*
SB_MISC_REGD0                   EQU     0D0h
  Core0_CState                EQU     BIT0+BIT1+BIT2              ; 000: C0  001: C1  010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
  Core1_CState                EQU     BIT4+BIT5+BIT6
  Core2_CState                EQU     BIT8+BIT9+BIT10
  Core3_CState                EQU     BIT12+BIT13+BIT14
  Core4_CState                EQU     BIT16++BIT17+BIT18
  Core5_CState                EQU     BIT20+BIT21+BIT22
  Core6_CState                EQU     BIT24+BIT25+BIT26
  Core7_CState                EQU     BIT28+BIT29+BIT30
*/
#define SB_MISC_REGD4           0xD4         //  CPU_Cstate1
/*
SB_MISC_REGD4                   EQU     0D4h
  Core8_CState                EQU     BIT0+BIT1+BIT2              ; 000: C0  001: C1  010: C2 011: C3 100: C4 101: C5 110: C6 111: C7
  Core9_CState                EQU     BIT4+BIT5+BIT6
  Core10_CState               EQU     BIT8+BIT9+BIT10
  Core11_CState               EQU     BIT12+BIT13+BIT14
  Core12_CState               EQU     BIT16++BIT17+BIT18
  Core13_CState               EQU     BIT20+BIT21+BIT22
  Core14_CState               EQU     BIT24+BIT25+BIT26
  Core15_CState               EQU     BIT28+BIT29+BIT30
*/
#define SB_MISC_REGF0           0xF0         //  SataPortSts    ?? EC touch only
/*
SB_MISC_REGF0                   EQU     0F0h
  Port0Sts                    EQU     BIT0                        ; The selected status of Port 0.
  Port1Sts                    EQU     BIT1                        ; The selected status of Port 1
  Port2Sts                    EQU     BIT2                        ; The selected status of Port 2.
  Port3Sts                    EQU     BIT3                        ; The selected status of Port 3
  Port4Sts                    EQU     BIT4                        ; The selected status of Port 4.
  Port5Sts                    EQU     BIT5                        ; The selected status of Port 5
  SataPortSel                 EQU     BIT24+BIT25                 ; 00  - Select "led" for Port 0 to 5
                                  ; 01 - Select "delete" for Port 0 to 5
                                  ; 10 - Select "err" for Port 0 to 5
                                  ; 11 - Select "led" for Port 0 to 5
*/


#define SB_RTC_REG00            0x00        // Seconds - RW
#define SB_RTC_REG01            0x01        // Seconds Alarm - RW
#define SB_RTC_REG02            0x02        // Minutes - RW
#define SB_RTC_REG03            0x03        // Minutes Alarm - RW
#define SB_RTC_REG04            0x04        // ours - RW
#define SB_RTC_REG05            0x05        // ours Alarm- RW
#define SB_RTC_REG06            0x06        // Day of Week - RW
#define SB_RTC_REG07            0x07        // Date of Mont - RW
#define SB_RTC_REG08            0x08        // Mont - RW
#define SB_RTC_REG09            0x09        // Year - RW
#define SB_RTC_REG0A            0x0A        // Register A - RW
#define SB_RTC_REG0B            0x0B        // Register B - RW
#define SB_RTC_REG0C            0x0C        // Register C - R
#define SB_RTC_REG0D            0x0D        // DateAlarm - RW
#define SB_RTC_REG32            0x32        // AltCentury - RW
#define SB_RTC_REG48            0x48        // Century - RW
#define SB_RTC_REG50            0x50        // Extended RAM Address Port - RW
#define SB_RTC_REG53            0x53        // Extended RAM Data Port - RW
#define SB_RTC_REG7E            0x7E        // RTC Time Clear - RW
#define SB_RTC_REG7F            0x7F        // RTC RAM Enable - RW

#define SB_ECMOS_REG00           0x00        // scratch - reg
//;BIT0=0   AsicDebug is enabled
//;BIT1=0   SLT S3 runs
#define SB_ECMOS_REG01          0x01
#define SB_ECMOS_REG02          0x02
#define SB_ECMOS_REG03          0x03
#define SB_ECMOS_REG04          0x04
#define SB_ECMOS_REG05          0x05
#define SB_ECMOS_REG06          0x06
#define SB_ECMOS_REG07          0x07
#define SB_ECMOS_REG08          0x08        // save 32BIT Physical address of Config structure
#define SB_ECMOS_REG09          0x09
#define SB_ECMOS_REG0A          0x0A
#define SB_ECMOS_REG0B          0x0B

#define SB_ECMOS_REG0C          0x0C        //;save MODULE_ID
#define SB_ECMOS_REG0D          0x0D        //;Reserve for NB

#define SB_IOMAP_REG00          0x000   // Dma_C 0
#define SB_IOMAP_REG02          0x002   // Dma_C 1
#define SB_IOMAP_REG04          0x004   // Dma_C 2
#define SB_IOMAP_REG06          0x006   // Dma_C 3
#define SB_IOMAP_REG08          0x008   // Dma_Status
#define SB_IOMAP_REG09          0x009   // Dma_WriteRest
#define SB_IOMAP_REG0A          0x00A   // Dma_WriteMask
#define SB_IOMAP_REG0B          0x00B   // Dma_WriteMode
#define SB_IOMAP_REG0C          0x00C   // Dma_Clear
#define SB_IOMAP_REG0D          0x00D   // Dma_MasterClr
#define SB_IOMAP_REG0E          0x00E   // Dma_ClrMask
#define SB_IOMAP_REG0F          0x00F   // Dma_AllMask
#define SB_IOMAP_REG20          0x020   // IntrCntrlReg1
#define SB_IOMAP_REG21          0x021   // IntrCntrlReg2
#define SB_IOMAP_REG40          0x040   // TimerC0
#define SB_IOMAP_REG41          0x041   // TimerC1
#define SB_IOMAP_REG42          0x042   // TimerC2
#define SB_IOMAP_REG43          0x043   // Tmr1CntrlWord
#define SB_IOMAP_REG61          0x061   // Nmi_Status
#define SB_IOMAP_REG70          0x070   // Nmi_Enable
#define SB_IOMAP_REG71          0x071   // RtcDataPort
#define SB_IOMAP_REG72          0x072   // AlternatRtcAddrPort
#define SB_IOMAP_REG73          0x073   // AlternatRtcDataPort
#define SB_IOMAP_REG80          0x080   // Dma_Page_Reserved0
#define SB_IOMAP_REG81          0x081   // Dma_PageC2
#define SB_IOMAP_REG82          0x082   // Dma_PageC3
#define SB_IOMAP_REG83          0x083   // Dma_PageC1
#define SB_IOMAP_REG84          0x084   // Dma_Page_Reserved1
#define SB_IOMAP_REG85          0x085   // Dma_Page_Reserved2
#define SB_IOMAP_REG86          0x086   // Dma_Page_Reserved3
#define SB_IOMAP_REG87          0x087   // Dma_PageC0
#define SB_IOMAP_REG88          0x088   // Dma_Page_Reserved4
#define SB_IOMAP_REG89          0x089   // Dma_PageC6
#define SB_IOMAP_REG8A          0x08A   // Dma_PageC7
#define SB_IOMAP_REG8B          0x08B   // Dma_PageC5
#define SB_IOMAP_REG8C          0x08C   // Dma_Page_Reserved5
#define SB_IOMAP_REG8D          0x08D   // Dma_Page_Reserved6
#define SB_IOMAP_REG8E          0x08E   // Dma_Page_Reserved7
#define SB_IOMAP_REG8F          0x08F   // Dma_Refres
#define SB_IOMAP_REG92          0x092   // FastInit
#define SB_IOMAP_REGA0          0x0A0   // IntrCntrl2Reg1
#define SB_IOMAP_REGA1          0x0A1   // IntrCntrl2Reg2
#define SB_IOMAP_REGC0          0x0C0   // Dma2_C4Addr
#define SB_IOMAP_REGC2          0x0C2   // Dma2_C4Cnt
#define SB_IOMAP_REGC4          0x0C4   // Dma2_C5Addr
#define SB_IOMAP_REGC6          0x0C6   // Dma2_C5Cnt
#define SB_IOMAP_REGC8          0x0C8   // Dma2_C6Addr
#define SB_IOMAP_REGCA          0x0CA   // Dma2_C6Cnt
#define SB_IOMAP_REGCC          0x0CC   // Dma2_C7Addr
#define SB_IOMAP_REGCE          0x0CE   // Dma2_C7Cnt
#define SB_IOMAP_REGD0          0x0D0   // Dma_Status
#define SB_IOMAP_REGD2          0x0D2   // Dma_WriteRest
#define SB_IOMAP_REGD4          0x0D4   // Dma_WriteMask
#define SB_IOMAP_REGD6          0x0D6   // Dma_WriteMode
#define SB_IOMAP_REGD8          0x0D8   // Dma_Clear
#define SB_IOMAP_REGDA          0x0DA   // Dma_Clear
#define SB_IOMAP_REGDC          0x0DC   // Dma_ClrMask
#define SB_IOMAP_REGDE          0x0DE   // Dma_ClrMask
#define SB_IOMAP_REGF0          0x0F0   // NCP_Error
#define SB_IOMAP_REG40B         0x040B  // DMA1_Extend
#define SB_IOMAP_REG4D0         0x04D0  // IntrEdgeControl
#define SB_IOMAP_REG4D6         0x04D6  // DMA2_Extend
#define SB_IOMAP_REGC00         0x0C00  // Pci_Intr_Index
#define SB_IOMAP_REGC01         0x0C01  // Pci_Intr_Data
#define SB_IOMAP_REGC14         0x0C14  // Pci_Error
#define SB_IOMAP_REGC50         0x0C50  // CMIndex
#define SB_IOMAP_REGC51         0x0C51  // CMData
#define SB_IOMAP_REGC52         0x0C52  // GpmPort
#define SB_IOMAP_REGC6F         0x0C6F  // Isa_Misc
#define SB_IOMAP_REGCD0         0x0CD0  // PMio2_Index
#define SB_IOMAP_REGCD1         0x0CD1  // PMio2_Data
#define SB_IOMAP_REGCD4         0x0CD4  // BIOSRAM_Index
#define SB_IOMAP_REGCD5         0x0CD5  // BIOSRAM_Data
#define SB_IOMAP_REGCD6         0x0CD6  // PM_Index
#define SB_IOMAP_REGCD7         0x0CD7  // PM_Data
#define SB_IOMAP_REGCF9         0x0CF9          // CF9Rst reg


#define SB_SPI_MMIO_REG00       0x00        //SPI_
#define SB_SPI_MMIO_REG0C       0x0C        //SPI_Cntrl1 Register

#define AMD_NB_REG78            0x78
#define AMD_NB_SCRATCH          AMD_NB_REG78
#define MailBoxPort             0x3E

// GPP Link Configuration
#define GPP_CFGMODE_X4000       0x0
#define GPP_CFGMODE_X2200       0x2
#define GPP_CFGMODE_X2110       0x3
#define GPP_CFGMODE_X1111       0x4

#define MAX_TRAINING_RETRY      0x4000
#define MAX_GPP_RESETS          8         //lx-temp to confirm with jason


#pragma pack (pop)