chip soc/intel/cannonlake

	register "SaGv" = "SaGv_FixedHigh"

	register "PcieClkSrcClkReq[0]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[1]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[2]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[3]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[4]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[5]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[6]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[7]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[8]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[9]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[10]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[11]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[12]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[13]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[14]" = "PCIE_CLK_NOTUSED"
	register "PcieClkSrcClkReq[15]" = "PCIE_CLK_NOTUSED"

	register "s0ix_enable" = "0"

	register "eist_enable" = "1"

	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
		[PchSerialIoIndexSPI0]  = PchSerialIoDisabled,
		[PchSerialIoIndexSPI1]  = PchSerialIoDisabled,
		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoDisabled,
	}"

	register "DisableHeciRetry" = "1"

	device cpu_cluster 0 on end

	device domain 0 on
		device ref system_agent on  end
		device ref peg0 on      # x16 or x8
			register "PcieClkSrcUsage[3]" = "0x40"
			smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "PCIE6" "SlotDataBusWidth16X"
		end
		device ref peg1 on      # x8
			register "PcieClkSrcUsage[4]" = "0x41"
			smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthOther" "PCIE4" "SlotDataBusWidth8X"
		end
		device ref igpu on  end
		device ref dptf off end
		device ref gna on  end
		device ref thermal on  end
		device ref xhci on
			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 front left
			register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 front right
			register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)"	# USB_1_2 header port A
			register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)"	# USB_1_2 header port B
			register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 rear top-right
			register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 rear bottom-right
			register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# BMC port A
			register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 rear bottom-left
			register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# BMC port B (seems to be unused)
			register "usb2_ports[10]" = "USB2_PORT_MID(OC_SKIP)"	# USB 3.1 rear top-left

			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 rear bottom-right
			register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 rear top-right
			register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 rear bottom-left
			register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 rear top-left
			register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 front left
			register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# USB 3.1 front right

			chip drivers/usb/acpi
				device usb 0.0 on
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Front Left""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(0, 0)"
						device usb 2.0 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Front Right""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(0, 1)"
						device usb 2.1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 USB_1_2 Header Port A""
						register "type" = "UPC_TYPE_INTERNAL"
						register "group" = "ACPI_PLD_GROUP(1, 0)"
						device usb 2.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 USB_1_2 Header Port B""
						register "type" = "UPC_TYPE_INTERNAL"
						register "group" = "ACPI_PLD_GROUP(1, 1)"
						device usb 2.3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Rear Right Upper""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 0)"
						device usb 2.4 on end
					end
					chip drivers/usb/acpi
						device usb 2.5 off end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Rear Right Lower""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device usb 2.6 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 BMC Port A""
						register "type" = "UPC_TYPE_INTERNAL"
						register "group" = "ACPI_PLD_GROUP(3, 0)"
						device usb 2.7 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Rear Left Lower""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device usb 2.8 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 BMC Port B""
						register "type" = "UPC_TYPE_INTERNAL"
						register "group" = "ACPI_PLD_GROUP(3, 1)"
						device usb 2.9 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 2.0 Type-A Rear Left Upper""
						register "type" = "UPC_TYPE_A"
						register "group" = "ACPI_PLD_GROUP(2, 3)"
						device usb 2.10 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Rear Right Lower""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 1)"
						device usb 3.0 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Rear Right Upper""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 0)"
						device usb 3.1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Rear Left Lower""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 2)"
						device usb 3.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Rear Left Upper""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(2, 3)"
						device usb 3.3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Front Left""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(0, 0)"
						device usb 3.4 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB 3.1 Type-A Front Right""
						register "type" = "UPC_TYPE_USB3_A"
						register "group" = "ACPI_PLD_GROUP(0, 1)"
						device usb 3.5 on end
					end
				end
			end
		end
		device ref xdci off end
		device ref shared_sram on  end
		device ref cnvi_wifi off end
		device ref sdxc off end
		device ref i2c0 off  end
		device ref i2c1 off end
		device ref i2c2 off end
		device ref i2c3 off end
		device ref heci1 off end
		device ref heci2 off end
		device ref csme_ider off end
		device ref csme_ktr off end
		device ref heci3 off end
		device ref sata on
			register "satapwroptimize" = "1"

			register "SataPortsEnable[0]" = "1"
			register "SataPortsEnable[1]" = "1"
			register "SataPortsEnable[2]" = "1"
			register "SataPortsEnable[3]" = "1"
			register "SataPortsEnable[4]" = "1"
			register "SataPortsEnable[5]" = "1"
			register "SataPortsEnable[6]" = "1"
			register "SataPortsEnable[7]" = "1"

			register "SataPortsHotPlug[0]" = "1"
			register "SataPortsHotPlug[1]" = "1"
			register "SataPortsHotPlug[2]" = "1"
			register "SataPortsHotPlug[3]" = "1"
			register "SataPortsHotPlug[4]" = "1"
			register "SataPortsHotPlug[5]" = "1"
			register "SataPortsHotPlug[6]" = "1"
			register "SataPortsHotPlug[7]" = "1"
		end
		device ref pcie_rp21 on
			register "PcieRpSlotImplemented[20]" = "1"
			register "PcieRpEnable[20]" = "1"
			register "PcieRpLtrEnable[20]" = "1"
			register "PcieClkSrcUsage[10]" = "20"
			smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthOther" "PCIE5" "SlotDataBusWidth4X"
		end
		device ref pcie_rp1 on
			register "PcieRpSlotImplemented[0]" = "1"
			register "PcieRpEnable[0]" = "1"
			register "PcieRpLtrEnable[0]" = "1"
			register "PcieClkSrcUsage[1]" = "0x80"
			smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M2_1" "SlotDataBusWidth4X"
		end
		device ref pcie_rp9 on	# GbE #1
			register "PcieRpEnable[8]" = "1"
			register "PcieRpLtrEnable[8]" = "1"
			register "PcieClkSrcUsage[14]" = "8"
			# Type indexes are needed for systemd to use "onboard" names by default
			# (eno0, eno1).  Otherwise it uses "slot" names that can change if any
			# of the preceding PCIe slots are populated/unpopulated.  Numbering 1/2
			# (rather than 0/1) is consistent with the mainboard manual and vendor
			# firmware.
			device pci 00.0 on
				smbios_dev_info 1
			end
		end
		device ref pcie_rp10 on	# BMC video
			register "PcieRpEnable[9]" = "1"
			register "PcieRpLtrEnable[9]" = "1"
			register "PcieClkSrcUsage[8]" = "9"
		end
		device ref pcie_rp11 on	# GbE #2
			register "PcieRpEnable[10]" = "1"
			register "PcieRpLtrEnable[10]" = "1"
			register "PcieClkSrcUsage[11]" = "10"
			device pci 00.0 on
				smbios_dev_info 2
			end
		end
		device ref uart0 off end
		device ref uart1 off end
		device ref gspi0 off end
		device ref gspi1 off end
		device ref lpc_espi on
			# This board has a lot of SuperIO LDNs with I/O BARs, the LPC generic
			# I/O ranges must be configured manually.
			register "gen1_dec" = "0x000c0ca1"	# IPMI: ca0-caf
			register "gen2_dec" = "0x007c0a01"	# ASpeed SuperIO SWC and mailbox: a00-a7f
			register "gen3_dec" = "0x00040291"	# Nuvoton SuperIO HW monitor: 290-297

			# AST2500 Super IO UART1 requires continuous mode
			register "serirq_mode" = "SERIRQ_CONTINUOUS"

			chip drivers/ipmi # BMC KCS
				device pnp ca2.0 on end
				register "bmc_i2c_address" = "0x10"
			end
			# Nuvoton SuperIO
			chip superio/common
				# This board has two SuperIOs.  The BMC's SuperIO is SIO0
				# since it is used for most normal SuperIO functionality.
				register "acpi_name" = ""SIO1""
				device pnp 2e.0 on
					chip superio/nuvoton/nct6791d
						device pnp 2e.1 off end	# Parallel port
						device pnp 2e.2 off end	# UART A
						device pnp 2e.3 off end	# UART B, IR
						device pnp 2e.5 off end	# Keyboard Controller
						device pnp 2e.6 off end	# Consumer IR
						device pnp 2e.7 off end	# GPIO 6
						device pnp 2e.107 off end	# GPIO 7
						device pnp 2e.207 off end	# GPIO 8
						device pnp 2e.8 off end # WDT
						device pnp 2e.108 off end # GPIO0
						device pnp 2e.308 off end # GPIO base address mode
						device pnp 2e.408 off end # WDT_MEM
						device pnp 2e.708 alias nvt_superio_gpio1 on	# GPIO1
							# Global Control Registers
							# IRQ Polarity
							irq 0x13 = 0xff
							irq 0x14 = 0xff
							# Multi Function Selection
							irq 0x1a = 0x44
							irq 0x1b = 0x66
							irq 0x1c = 0x10
							irq 0x1d = 0x00
							irq 0x2a = 0xe0
							irq 0x2b = 0x00
							irq 0x2c = 0x00
							irq 0x2d = 0x00

							# GPIO1
							irq 0xf0 = 0x08
							irq 0xf4 = 0xf7
						end
						device pnp 2e.9 on	# GPIO2
							irq 0xe0 = 0xbf
							irq 0xe9 = 0xbf
						end
						device pnp 2e.109 on	# GPIO3
							irq 0xe4 = 0x11
							irq 0xe5 = 0x01
							irq 0xe6 = 0x00
							irq 0xea = 0x6e
							irq 0xfe = 0x00
						end
						device pnp 2e.209 on	# GPIO4
							irq 0xf0 = 0x44
							irq 0xee = 0xbb
						end
						device pnp 2e.309 off end	# GPIO5
						device pnp 2e.a on	# ACPI
							# Bit 4 is "power-loss last state flag", in RTC well.
							# 1=off (default), 0=on.
							# This might be automatic power on for this board
							irq 0xe6 = 0x0a
							irq 0xed = 0x01
						end
						device pnp 2e.b on	# Hardware Monitor, Front Panel LED
							io 0x60 = 0x0290	# HM IO base
							io 0x62 = 0x0000	# SB-TSI IO base
							irq 0x70 = 0x00		# HM IRQ
						end
						device pnp 2e.d off end	# BCLK, WDT2, WDT_MEM
						device pnp 2e.e off end	# CIR Wake-up
						device pnp 2e.f on end	# GPIO push-pull / open-drain
						device pnp 2e.14 on end	# SVID, Port 80 UART
						device pnp 2e.16 off end	# DS5
						device pnp 2e.116 off end	# DS3
						device pnp 2e.316 off end	# PCHDSW
						device pnp 2e.416 off end	# DSWWOPT
						device pnp 2e.516 on end	# DS3OPT
						device pnp 2e.616 off end	# DSDSS
						device pnp 2e.716 off end	# DSPU
					end
				end
			end
			# AST2500 SuperIO
			chip superio/common
				device pnp 4e.0 on
					chip superio/aspeed/ast2400
						device pnp 4e.2 on	# SUART1
							io 0x60 = 0x3f8
							irq 0x70 = 0x04
							drq 0xf0 = 0x00
						end
						device pnp 4e.3 off end # SUART2
						device pnp 4e.4 off	 # SWC
							io 0x60 = 0xa00
							io 0x62 = 0xa10
							io 0x64 = 0xa20
							io 0x66 = 0xa30
							irq 0x70 = 0x09
						end
						device pnp 4e.5 off end	# KBC
						device pnp 4e.7 off end	# GPIO
						device pnp 4e.b off end	# SUART3
						device pnp 4e.c off end	# SUART4
						device pnp 4e.d on	# iLPC2AHB
							irq 0x70 = 0x00
						end
						device pnp 4e.e on	# Mailbox
							io 0x60 = 0xa40
							irq 0x70 = 0x00
						end
					end
				end
			end
			chip drivers/pc80/tpm
				# The TPM header has SERIRQ#, but it is not
				# connected on the TPM module - no TPM IRQ.
				device pnp 0c31.0 on end
			end
		end
		device ref p2sb off end
		device ref pmc hidden end
		device ref hda off end
		device ref smbus on  end
		device ref fast_spi on  end
	end
end