Doc/Intel: Remove out-of-date documentation
There's dead links, CorebootPayloadPkg was replaced by UEFIPayloadPkg,
the development procedures are severely out-of-date, the only FSP 1.1
platform is Braswell (which is no longer actively developed), and the
pages don't appear in doc.coreboot.org (which uses Sphinx to generate
HTML pages from .md files). Oh, and it doesn't seem to have a license
associated to it.
Get rid of outdated documentation.
Change-Id: If359f554e85d32cdb65c3d928b5155db30bc40a5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html
deleted file mode 100644
index 0d4631a..0000000
--- a/Documentation/Intel/Board/board.html
+++ /dev/null
@@ -1,239 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>Board</title>
- </head>
- <body>
-
-<h1>x86 Board Development</h1>
-<p>
- Board development requires System-on-a-Chip (SoC) support.
- The combined steps are listed
- <a target="_blank" href="../development.html">here</a>.
- The development steps for the board are listed below:
-</p>
-<ol>
- <li><a href="#RequiredFiles">Required Files</a></li>
- <li>Enable <a href="#SerialOutput">Serial Output</a></li>
- <li>Load the <a href="#SpdData">Memory Timing Data</a></li>
- <li><a href="#DisablePciDevices">Disable</a> the PCI devices</li>
- <li><a href="#AcpiTables">ACPI Tables</a></li>
-</ol>
-
-
-<hr>
-<h2><a name="RequiredFiles">Required Files</a></h2>
-<p>
- Create the board directory as src/mainboard/<Vendor>/<Board>.
-</p>
-
-<p>
- The following files are required to build a new board:
-</p>
-<ol>
- <li>Kconfig.name - Defines the Kconfig value for the board</li>
- <li>Kconfig
- <ol type="A">
- <li>Selects the SoC for the board and specifies the SPI flash size
- <ol type="I">
- <li>BOARD_ROMSIZE_KB_<Size></li>
- <li>SOC_<Vendor>_<Chip Family></li>
- </ol>
- </li>
- <li>Declare the Kconfig values for:
- <ol type="I">
- <li>MAINBOARD_DIR</li>
- <li>MAINBOARD_PART_NUMBER</li>
- <li>MAINBOARD_VENDOR</li>
- </ol>
- </li>
- </ol>
- </li>
- <li>devicetree.cb - Enable root bridge and serial port
- <ol type="A">
- <li>The first line must be "chip soc/Intel/<soc family>";
- this path is used by the generated static.c to include the chip.h
- header file
- </li>
- </ol>
- </li>
- <li>romstage.c
- <ol type="A">
- <li>Add routine mainboard_romstage_entry which calls romstage_common</li>
- </ol>
- </li>
- <li>Configure coreboot build:
- <ol type="A">
- <li>Set LOCALVERSION</li>
- <li>Select vendor for the board</li>
- <li>Select the board</li>
- <li>CBFS_SIZE = 0x00100000</li>
- <li>Set the CPU_MICROCODE_CBFS_LEN</li>
- <li>Set the CPU_MICROCODE_CBFS_LOC</li>
- <li>Set the FSP_IMAGE_ID_STRING</li>
- <li>Set the FSP_LOC</li>
- <li>No payload</li>
- <li>Choose the default value for all other options</li>
- </ol>
- </li>
-</ol>
-
-
-<hr>
-<h2><a name="SerialOutput">Enable Serial Output</a></h2>
-<p>
- Use the following steps to enable serial output:
-</p>
-<ol>
- <li>Implement the car_mainboard_pre_console_init routine in the com_init.c
- file:
- <ol type="A">
- <li>Power on and enable the UART controller</li>
- <li>Connect the UART receive and transmit data lines to the
- appropriate SoC pins
- </li>
- </ol>
- </li>
- <li>Add Makefile.inc
- <ol type="A">
- <li>Add com_init.c to romstage</li>
- </ol>
- </li>
-</ol>
-
-
-<hr>
-<h2><a name="SpdData">Memory Timing Data</a></h2>
-<p>
- Memory timing data is located in the flash. This data is in the format of
- <a target="_blank" href="https://en.wikipedia.org/wiki/Serial_presence_detect">serial presence detect</a>
- (SPD) data.
- Use the following steps to load the SPD data:
-</p>
-<ol>
- <li>Edit Kconfig to add the DISPLAY_SPD_DATA" value which enables the
- display of the SPD data being passed to MemoryInit
- </li>
- <li>Create an "spd" subdirectory</li>
- <li>Create an spd/spd.c file for the SPD implementation
- <ol type="A">
- <li>Implement the mainboard_fill_spd_data routine
- <ol type="i">
- <li>Read the SPD data either from the spd.bin file or using I2C or SMBUS</li>
- <li>Fill in the pei_data structure with SPD data for each of the DIMMs</li>
- <li>Set the DIMM channel configuration</li>
- </ol>
- </li>
- </ol>
- </li>
- <li>Add an .spd.hex file containing the memory timing data to the spd subdirectory</li>
- <li>Create spd/Makefile.inc
- <ol type="A">
- <li>Add spd.c to romstage</li>
- <li>Add the .spd.hex file to SPD_SOURCES</li>
- </ol>
- </li>
- <li>Edit Makefile.inc to add the spd subdirectory</li>
- <li>Edit romstage.c
- <ol type="A">
- <li>Call mainboard_fill_spd_data</li>
- <li>Add mainboard_memory_init_params to copy the SPD and DRAM
- configuration data from the pei_data structure into the UPDs
- for MemoryInit
- </li>
- </ol>
- </li>
- <li>Edit devicetree.cb
- <ol type="A">
- <li>Include the UPD parameters for MemoryInit except for:
- <ul>
- <li>Address of SPD data</li>
- <li>DRAM configuration set above</li>
- </ul>
- </li>
- </ol>
- </li>
- <li>A working FSP
- <a target="_blank" href="../fsp1_1.html#MemoryInit">MemoryInit</a>
- routine is required to complete debugging</li>
- <li>Debug the result until port 0x80 outputs
- <ol type="A">
- <li>0x34:
- - Just after entering
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a>
- </li>
- <li>0x36:
- - Just before displaying the
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l106">UPD parameters</a>
- for FSP MemoryInit
- </li>
- <li>0x92: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l219">POST_FSP_MEMORY_INIT</a>
- - Just before calling FSP
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l125">MemoryInit</a>
- </li>
- <li>0x37:
- - Just after returning from FSP
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l127">MemoryInit</a>
- </li>
- </ol>
- </li>
- <li>Continue debugging with CONFIG_DISPLAY_HOBS enabled until TempRamExit is called</li>
-</ol>
-
-
-
-<hr>
-<h2><a name="DisablePciDevices">Disable PCI Devices</a></h2>
-<p>
- Ramstage's BS_DEV_ENUMERATE state displays the PCI vendor and device IDs for all
- of the devices in the system. Edit the devicetree.cb file:
-</p>
-<ol>
- <li>Edit the devicetree.cb file:
- <ol type="A">
- <li>Add an entry for a PCI device.function and turn it off. The entry
- should look similar to:
-<pre><code>device pci 14.0 off end</code></pre>
- </li>
- <li>Turn on the devices for:
- <ul>
- <li>Memory Controller</li>
- <li>Debug serial device</li>
- </ul>
- </li>
- </ol>
- </li>
- <li>Debug until the BS_DEV_ENUMERATE state shows the proper state for all of the devices</li>
-</ol>
-
-
-
-<hr>
-<h2><a name="AcpiTables">ACPI Tables</a></h2>
-<ol>
- <li>Edit Kconfig
- <ol type="A">
- <li>Add "select HAVE_ACPI_TABLES"</li>
- </ol>
- </li>
- <li>Add the acpi_tables.c module:
- <ol type="A">
- <li>Include soc/acpi.h</li>
- <li>Add the acpi_create_fadt routine
- <ol type="I">
- <li>fill in the ACPI header</li>
- <li>Call the acpi_fill_fadt routine</li>
- </ol>
- </li>
- </ol>
- </li>
- <li>Add the dsdt.asl module:
- </li>
-</ol>
-
-
-
-<hr>
-<p>Modified: 20 February 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/Board/galileo.html b/Documentation/Intel/Board/galileo.html
deleted file mode 100644
index f7edf6e..0000000
--- a/Documentation/Intel/Board/galileo.html
+++ /dev/null
@@ -1,113 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>Galileo</title>
- </head>
- <body>
-
-<h1>Intel® Galileo Development Board</h1>
-<table>
- <tr>
- <td><a target="_blank" href="http://www.mouser.com/images/microsites/Intel_Galileo2_lrg.jpg"><img alt="Galileo Gen 2" src="http://www.mouser.com/images/microsites/Intel_Galileo2_lrg.jpg" width=500></a></td>
- <td>
- The Intel® Galileo Gen 2 mainboard code was developed along with the Intel®
- <a target="_blank" href="../SoC/quark.html">Quark™</a> SoC:
- <ul>
- <li><a target="_blank" href="../development.html">Overall</a> development</li>
- <li><a target="_blank" href="../SoC/soc.html">SoC</a> support</li>
- <li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li>
- <li><a target="_blank" href="board.html">Board</a> support</li>
- </ul>
- </td>
- </tr>
-</table>
-
-
-
-<hr>
-<h2>Galileo Board Documentation</h2>
-<ul>
- <li>Common Components
- <ul>
- <li>A/D: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/adc108s102.pdf">ADC108S102</a></li>
- <li>Analog Switch: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/ts5a23159.pdf">TS5A23159</a></li>
- <li>Ethernet (10/100 MB/S): Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/dp83848-ep.pdf">DP83848</a></li>
- <li>Load Switch: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/tps22920.pdf">TPS22920x</a></li>
- <li>Memory (256 MiB): Micron <a target="_blank" href="https://www.micron.com/~/media/Documents/Products/Data%20Sheet/DRAM/DDR3/1Gb_1_35V_DDR3L.pdf">MT41K128M8</a></li>
- <li>SoC: Intel® Quark™ <a target="_blank" href="../SoC/quark.html">X-1000</a></li>
- <li>Serial EEPROM (1 KiB): ON Semiconductor® <a target="_blank" href="http://www.onsemi.com/pub_link/Collateral/CAT24C01-D.PDF">CAT24C08</a></li>
- <li>SPI Flash (8 MiB): Winbond™ <a target="_blank" href="http://www.winbond-usa.com/resource-files/w25q64fv_revl1_100713.pdf">W25Q64FV</a></li>
- <li>Step Down Converter: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/slvsag7c/slvsag7c.pdf">TPS62130</a></li>
- <li>Step Down Converter: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ug/slvu570/slvu570.pdf">TPS652510</a></li>
- <li>Termination Regulator: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/tps51200.pdf">TPS51200</a></li>
- </ul>
- </li>
- <li>Make a bootable <a target="_blank" href="https://software.intel.com/en-us/get-started-galileo-linux-step1">micro SD card</a></li>
-</ul>
-
-<h3>Galileo Gen 2 Board Documentation</h3>
-<ul>
- <li><a target="_blank" href="http://files.linuxgizmos.com/intel_galileo_gen2_blockdiagram.jpg">Block Diagram</a></li>
- <li><a target="_blank" href="https://software.intel.com/en-us/iot/library/galileo-getting-started">Getting Started</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo-overview.html">Overview</a></li>
- <li><a target="_blank" href="http://files.linuxgizmos.com/intel_galileo_gen2_ports.jpg">Port Diagram</a></li>
- <li><a target="_blank" href="http://download.intel.com/support/galileo/sb/intelgalileogen2prodbrief_330736_003.pdf">Product Brief</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/galileo-g2-schematic.pdf">Schematic</a></li>
- <li><a target="_blank" href="http://download.intel.com/support/galileo/sb/galileo_boarduserguide_330237_001.pdf">User Guide</a></li>
- <li>Components
- <ul>
- <li>A/D: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/adc108s102.pdf">ADC108S102</a></li>
- <li>I2C 16-channel, 12-bit PWM: NXP Semiconductors <a target="_blank" href="http://cache.nxp.com/documents/data_sheet/PCA9685.pdf">PCA9685</a></li>
- <li>I2C I/O Ports: NXP Semiconductors <a target="_blank" href="http://www.nxp.com/documents/data_sheet/PCAL9535A.pdf">PCAL9535A</a></li>
- <li>Octal Buffer/Driver: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/sn74lv541at.pdf">SN74LV541AT</a></li>
- <li>Quadruple Bus Buffer: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/sn74lv125a.pdf">SN74LV125A</a></li>
- <li>Quadruple Bus Buffer with 3-State Outputs: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/sn74lvc126a.pdf">SN74LVC126A</a></li>
- <li>Serial EEPROM (1 KiB): ON Semiconductor® <a target="_blank" href="http://www.onsemi.com/pub_link/Collateral/CAT24C01-D.PDF">CAT24C08</a></li>
- <li>Single 2-input multiplexer: NXP Semiconductors <a target="_blank" href="http://www.nxp.com/documents/data_sheet/74LVC1G157.pdf">74LVC1G157</a></li>
- <li>Step Down Converter: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/slvsag7c/slvsag7c.pdf">TPS62130</a></li>
- </ul>
- </li>
-</ul>
-
-<h3>Galileo Gen 1 Board Documentation</h3>
-<ul>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/galileo-g1-datasheet.pdf">Datasheet</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/galileo-g1-schematic.pdf">Schematic</a></li>
- <li>Components
- <ul>
- <li>A/D: Analog Devices <a target="_blank" href="http://www.analog.com/media/en/technical-documentation/data-sheets/AD7298-1.pdf">AD7298</a></li>
- <li>Analog Switch, 2 channel: Texas Instruments <a target="_blank" href="http://www.ti.com.cn/cn/lit/ds/symlink/ts5a23159.pdf">TS5A23159</a></li>
- <li>EEPROM & GPIO: Cypress <a target="_blank" href="http://www.cypress.com/file/37971/download">CY8C9540A</a></li>
- <li>Power Distribution Switch: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/tps2044b.pdf">TPS2051BDBVR</a></li>
- <li>RS232 Converter: Texas Instruments <a target="_blank" href="http://www.ti.com/lit/ds/symlink/max3232.pdf">MAX3232</a></li>
- <li>Voltage-Level Translator: Texas Instruments<a target="_blank" href="http://www.ti.com/lit/ds/symlink/txs0108e.pdf">TXS0108E</a></li>
- </ul>
- </li>
-</ul>
-
-
-
-<hr>
-<h2>Debug Tools</h2>
-<ul>
- <li>Flash Programmer:
- <ul>
- <li>Dediprog <a target="_blank" href="http://www.dediprog.com/pd/spi-flash-solution/SF100">SF100</a> ISP IC Programmer</li>
- </ul>
- </li>
- <li>JTAG Connector: <a target="_blank" href="https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=Olimex+ARM-JTAG-20-10">Olimex ARM-JTAG-20-10</a></li>
- <li>JTAG Debugger:
- <ul>
- <li>Olimex LTD <a target="_blank" href="https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=Olimex+ARM-USB-OCD-H">ARM-USB-OCD-H</a></li>
- <li>Tincan Tools <a target="_blank" href="https://www.tincantools.com/wiki/Flyswatter2">Flyswatter2</a></li>
- </ul>
- </li>
- <li><a target="_blank" href="http://download.intel.com/support/processors/quark/sb/sourcedebugusingopenocd_quark_appnote_330015_003.pdf">Hardware Setup and Software Installation</a></li>
- <li>USB Serial cable: FTDI <a target="_blank" href="https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=FTDI+TTL-232R-3V3">TTL-232R-3V3</a></li>
-</ul>
-
-
-<hr>
-<p>Modified: 29 February 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/SoC/quark.html b/Documentation/Intel/SoC/quark.html
deleted file mode 100644
index c3eead2..0000000
--- a/Documentation/Intel/SoC/quark.html
+++ /dev/null
@@ -1,220 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>Quark™ SoC</title>
- </head>
- <body>
-
-<h1>Intel® Quark™ SoC</h1>
-<table>
- <tr>
- <td><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png"><img alt="Quark Block Diagram" src="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png" width=500></a></td>
- <td>
- The Quark™ SoC code was developed using the
- <a target="_blank" href="../Board/galileo.html">Galileo Gen 2</a>
- board:
- <ul>
- <li><a target="_blank" href="../development.html">Overall</a> development</li>
- <li><a target="_blank" href="soc.html">SoC</a> support</li>
- <li><a target="_blank" href="../fsp1_1.html">FSP 1.1</a> integration</li>
- <li><a target="_blank" href="../Board/board.html">Board</a> support</li>
- <li><a target="_blank" href="#QuarkFsp">Quark™ FSP</a></li>
- <li><a target="_blank" href="#CorebootPayloadPkg">CorebootPayloadPkg</a></li>
- </ul>
- </td>
- </tr>
-</table>
-
-
-
-<hr>
-<h2>Quark™ Documentation</h2>
-<ul>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/images/embedded/16x9/edc-quark-block-diagram-16x9.png">Block Diagram</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/www/us/en/embedded/products/quark/specifications.html">Specifications</a>:
- <ul>
- <li><a target="_blank" href="http://ark.intel.com/products/79084/Intel-Quark-SoC-X1000-16K-Cache-400-MHz">X1000</a>
- - <a target="_blank" href="http://www.intel.com/content/www/us/en/search.html?keyword=X1000">Documentation</a>:
- <ul>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/quark-x1000-datasheet.pdf">Datasheet</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/dam/support/us/en/documents/processors/quark/sb/intelquarkcore_devman_001.pdf">Developer's Manual</a></li>
- <li><a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/intel-quark-product-brief-v3.pdf">Product Brief</a></li>
- </ul>
- </li>
- </ul>
- </li>
- <li><a target="_blank" href="../index.html#Documentation">More documentation</a></li>
-</ul>
-
-
-
-<hr>
-<h2><a name="CorebootPayloadPkg">Quark™ EDK2 CorebootPayloadPkg</a></h2>
-<p>
-Build Instructions:
-</p>
-<ol>
- <li>Set up <a href="#BuildEnvironment">build environment</a></li>
- <li>Linux (assumes GCC48):
-<pre><code>build -p CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc -a IA32 \
- -t GCC48 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 \
- -DDEBUG_PRINT_ERROR_LEVEL=0x80000042 -DSHELL_TYPE=BUILD_SHELL \
- -DMAX_LOGICAL_PROCESSORS=1
-ls Build/CorebootPayloadPkgIA32/DEBUG_GCC48/FV/UEFIPAYLOAD.fd
-</code></pre>
- </li>
- <li>Windows (assumes Visual Studio 2015):
-<pre><code>build -p CorebootPayloadPkg\CorebootPayloadPkgIa32.dsc -a IA32 -t VS2015x86 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042 -DSHELL_TYPE=BUILD_SHELL -DMAX_LOGICAL_PROCESSORS=1
-dir Build\CorebootPayloadPkgIA32\DEBUG_VS2015x86\FV\UEFIPAYLOAD.fd
-</code></pre>
- </li>
- <li>In the .config for coreboot, set the following Kconfig values:
- <ul>
- <li>CONFIG_PAYLOAD_ELF=y</li>
- <li>CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd"</li>
- </ul>
- </li>
- <li>Build coreboot</li>
- <li>Copy the image build/coreboot.rom into flash</li>
-</ol>
-
-
-
-<hr>
-<h2><a name="BuildEnvironment">Quark™ EDK2 Build Environment</a></h2>
-<p>
- Use the following steps to setup a build environment:
-</p>
-<ol>
- <li>Get the EDK2 sources:
- <ol type="A">
- <li>EDK2: git clone <a target="_blank" href="https://github.com/tianocore/edk2.git">https://github.com/tianocore/edk2.git</a></li>
- <li>EDK2-non-osi: git clone <a target="_blank" href="https://github.com/tianocore/edk2-non-osi.git">https://github.com/tianocore/edk2-non-osi.git</a></li>
- <li>Win32 BaseTools: git clone <a target="_blank" href="https://github.com/tianocore/edk2-BaseTools-win32.git">https://github.com/tianocore/edk2-BaseTools-win32.git</a></li>
- </ol>
- </li>
- <li>Set up a build window:
- <ul>
- <li>Linux:
-<pre><code>export WORKSPACE=$PWD
-export PACKAGES_PATH="$PWD/edk2:$PWD/edk2-non-osi"
-cd edk2
-export WORKSPACE=$PWD
-. edksetup.sh
-</code></pre>
- </li>
- <li>Windows:
-<pre><code>set WORKSPACE=%CD%
-set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-non-osi
-set EDK_TOOLS_BIN=%WORKSPACE%\edk2-BaseTools-win32
-cd edk2
-edksetup.bat
-</code></pre>
- </li>
- </ul>
- </li>
-</ol>
-
-
-
-<hr>
-<h2><a name="QuarkFsp">Quark™ FSP</a></h2>
-<p>
-Getting the Quark FSP source:
-</p>
-<ol>
- <li>Set up an EDK-II <a href="#BuildEnvironment">Build Environment</a></li>
- <li>cd edk2</li>
- <li>mkdir QuarkFspPkg</li>
- <li>cd QuarkFspPkg</li>
- <li>Use git to clone <a target="_blank" href="https://review.gerrithub.io/#/admin/projects/LeeLeahy/quarkfsp">QuarkFspPkg</a> into the QuarkFpsPkg directory (.)</li>
-</ol>
-
-<h3>Building QuarkFspPkg</h3>
-<p>
-There are two versions of FSP: FSP 1.1 and FSP 2.0. There are also two
-different implementations of FSP, one using subroutines without SEC and
-PEI core and the original implementation which relies on SEC and PEI core.
-Finally there are two different build x86 types release (r32) and debug (d32).
-</p>
-<p>Note that the subroutine implementations are a <b>work in progress</b>.</p>
-<p>
-Build commands shown building debug FSP:
-</p>
-<ul>
- <li>Linux:
- <ul>
- <li>QuarkFspPkg/BuildFsp1_1.sh -d32</li>
- <li>QuarkFspPkg/BuildFsp1_1Pei.sh -d32</li>
- <li>QuarkFspPkg/BuildFsp2_0.sh -d32</li>
- <li>QuarkFspPkg/BuildFsp2_0Pei.sh -d32</li>
- </ul>
- <li>Windows:
- <ul>
- <li>QuarkFspPkg/BuildFsp1_1.bat -d32</li>
- <li>Windows: QuarkFspPkg/BuildFsp2_0.bat -d32</li>
- </ul>
- </li>
-</ul>
-
-<h3>Copying FSP files into coreboot Source Tree</h3>
-<p>
-There are some helper scripts to copy the FSP output into the coreboot
-source tree. The parameters to these scripts are:
-</p>
-<ol>
- <li>EDK2 tree root</li>
- <li>coreboot tree root</li>
- <li>Build type: DEBUG or RELEASE</li>
-</ol>
-<p>
-Script files:
-</p>
-<ul>
- <li>Linux:
- <ul>
- <li>QuarkFspPkg/coreboot_fsp1_1.sh</li>
- <li>QuarkFspPkg/coreboot_fsp1_1Pei.sh</li>
- <li>QuarkFspPkg/coreboot_fsp2_0.sh</li>
- <li>QuarkFspPkg/coreboot_fsp2_0Pei.sh</li>
- </ul>
-</ul>
-
-
-<hr>
-<h2>Quark™ EDK2 BIOS</h2>
-<p>
-Build Instructions:
-</p>
-<ol>
- <li>Set up <a href="#BuildEnvironment">build environment</a></li>
- <li>Build the image:
- <ul>
- <li>Linux:
-<pre><code>build -p QuarkPlatformPkg/Quark.dsc -a IA32 -t GCC48 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
-ls Build/Quark/DEBUG_GCC48/FV/Quark.fd
-</code></pre>
- </li>
- <li>Windows:
-<pre><code>build -p QuarkPlatformPkg/Quark.dsc -a IA32 -t VS2012x86 -b DEBUG -DDEBUG_PROPERTY_MASK=0x27 -DDEBUG_PRINT_ERROR_LEVEL=0x80000042
-dir Build\Quark\DEBUG_VS2012x86\FV\Quark.fd
-</code></pre>
- </li>
- </ul>
- </li>
-</ol>
-
-<p>
-Documentation:
-</p>
-<ul>
- <li><a target="_blank" href="https://github.com/tianocore/edk2/tree/master/QuarkPlatformPkg">EDK II firmware for Intel® Quark™ SoC X1000 based platforms</a></li>
- <li>Intel® Quark™ SoC X1000 <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/guides/quark-x1000-uefi-firmware-writers-guide.pdf">UEFI Firmware Writer's Guide</a></li>
-</ul>
-
-
-
-<hr>
-<p>Modified: 17 May 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html
deleted file mode 100644
index 8d565d5..0000000
--- a/Documentation/Intel/SoC/soc.html
+++ /dev/null
@@ -1,730 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>SoC</title>
- </head>
- <body>
-
-<h1>x86 System on a Chip (SoC) Development</h1>
-<p>
- SoC development is best done in parallel with development for a specific
- board. The combined steps are listed
- <a target="_blank" href="../development.html">here</a>.
- The development steps for the SoC are listed below:
-</p>
-<ol>
- <li><a target="_blank" href="../fsp1_1.html#RequiredFiles">FSP 1.1</a> required files</li>
- <li>SoC <a href="#RequiredFiles">Required Files</a></li>
- <li><a href="#Descriptor">Start Booting</a></li>
- <li><a href="#EarlyDebug">Early Debug</a></li>
- <li><a href="#Bootblock">Bootblock</a></li>
- <li><a href="#TempRamInit">TempRamInit</a></li>
- <li><a href="#Romstage">Romstage</a>
- <ol type="A">
- <li>Enable <a href="#SerialOutput">Serial Output"</a></li>
- <li>Get the <a href="#PreviousSleepState">Previous Sleep State</a></li>
- <li>Add the <a href="#MemoryInit">MemoryInit</a> Support</li>
- <li>Disable the <a href="#DisableShadowRom">Shadow ROM</a></li>
- </ol>
- </li>
- <li><a href="#Ramstage">Ramstage</a>
- <ol type="A">
- <li><a href="#DeviceTree">Start Device Tree Processing</a></li>
- <li>Set up the <a href="#MemoryMap">Memory Map"</a></li>
- </ol>
- </li>
- <li><a href="#AcpiTables">ACPI Tables</a></li>
- <li><a href="#LegacyHardware">Legacy Hardware</a></li>
-</ol>
-
-
-<hr>
-<h2><a name="RequiredFiles">Required Files</a></h2>
-<p>
- Create the directory as src/soc/<Vendor>/<Chip Family>.
-</p>
-
-<p>
- The following files are required to build a new SoC:
-</p>
-<ul>
- <li>Include files
- <ul>
- <li>include/soc/pei_data.h</li>
- <li>include/soc/pm.h</li>
- </ul>
- </li>
- <li>Kconfig - Defines the Kconfig value for the SoC and selects the tool
- chains for the various stages:
- <ul>
- <li>select ARCH_BOOTBLOCK_<Tool Chain></li>
- <li>select ARCH_RAMSTAGE_<Tool Chain></li>
- <li>select ARCH_ROMSTAGE_<Tool Chain></li>
- <li>select ARCH_VERSTAGE_<Tool Chain></li>
- </ul>
- </li>
- <li>Makefile.inc - Specify the include paths</li>
- <li>memmap.c - Top of usable RAM</li>
-</ul>
-
-
-<hr>
-<h2><a name="Descriptor">Start Booting</a></h2>
-<p>
- Some SoC parts require additional firmware components in the flash.
- This section describes how to add those pieces.
-</p>
-
-<h3>Intel Firmware Descriptor</h3>
-<p>
- The Intel Firmware Descriptor (IFD) is located at the base of the flash part.
- The following command overwrites the base of the flash image with the Intel
- Firmware Descriptor:
-</p>
-<pre><code>dd if=descriptor.bin of=build/coreboot.rom conv=notrunc >/dev/null 2>&1</code></pre>
-
-
-<h3><a name="MEB">Management Engine Binary</a></h3>
-<p>
- Some SoC parts contain and require that the Management Engine (ME) be running
- before it is possible to bring the x86 processor out of reset. A binary file
- containing the management engine code must be added to the firmware using the
- ifdtool. The following commands add this binary blob:
-</p>
-<pre><code>util/ifdtool/ifdtool -i ME:me.bin build/coreboot.rom
-mv build/coreboot.rom.new build/coreboot.rom
-</code></pre>
-
-
-<h3><a name="EarlyDebug">Early Debug</a></h3>
-<p>
- Early debugging between the reset vector and the time the serial port is enabled
- is most easily done by writing values to port 0x80.
-</p>
-
-
-<h3>Success</h3>
-<p>
- When the reset vector is successfully invoked, port 0x80 will output the following value:
-</p>
-<ul>
- <li>0x01: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l45">POST_RESET_VECTOR_CORRECT</a>
- - Bootblock successfully executed the
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/reset16.inc;hb=HEAD#l4">reset vector</a>
- and entered the 16-bit code at
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/entry16.inc;hb=HEAD#l35">_start</a>
- </li>
-</ul>
-
-
-<hr>
-<h2><a name="Bootblock">Bootblock</a></h2>
-<p>
- Implement the bootblock using the following steps:
-</p>
-<ol>
- <li>Create the directory as src/soc/<Vendor>/<Chip Family>/bootblock</li>
- <li>Add the timestamp.inc file which initializes the floating point registers and saves
- the initial timestamp.
- </li>
- <li>Add the bootblock.c file which:
- <ol type="A">
- <li>Enables memory-mapped PCI config access</li>
- <li>Updates the microcode by calling intel_update_microcode_from_cbfs</li>
- <li>Enable ROM caching</li>
- </ol>
- </li>
- <li>Edit the src/soc/<Vendor>/<Chip Family>/Kconfig file
- <ol type="A">
- <li>Add the BOOTBLOCK_CPU_INIT value to point to the bootblock.c file</li>
- <li>Add the CHIPSET_BOOTBLOCK_INCLUDE value to point to the timestamp.inc file</li>
- </ol>
- </li>
- <li>Edit the src/soc/<Vendor>/<Chip Family>/Makefile.inc file
- <ol type="A">
- <li>Add the bootblock subdirectory</li>
- </ol>
- </li>
- <li>Edit the src/soc/<Vendor>/<Chip Family>/memmap.c file
- <ol type="A">
- <li>Add the fsp/memmap.h include file</li>
- </ol>
- </li>
- <li>Add the necessary .h files to define the necessary values and structures</li>
- <li>When successful port 0x80 will output the following values:
- <ol type="A">
- <li>0x01: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l45">POST_RESET_VECTOR_CORRECT</a>
- - Bootblock successfully executed the
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/reset16.inc;hb=HEAD#l4">reset vector</a>
- and entered the 16-bit code at
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/entry16.inc;hb=HEAD#l35">_start</a>
- </li>
- <li>0x10: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l53">POST_ENTER_PROTECTED_MODE</a>
- - Bootblock executing in
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/32bit/entry32.inc;hb=HEAD#l55">32-bit mode</a>
- </li>
- <li>0x10 - Verstage/romstage reached 32-bit mode</li>
- </ol>
- </li>
-</ol>
-
-<p>
- <b>Build Note:</b> The following files are included into the default bootblock image:
-</p>
-<ul>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/bootblock_romcc.S;hb=HEAD">src/arch/x86/bootblock_romcc.S</a>
- added by <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/Makefile.inc;hb=HEAD#l133">src/arch/x86/Makefile.inc</a>
- and includes the following files:
- <ul>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/prologue.inc">src/arch/x86/prologue.inc</a></li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/reset16.inc">src/cpu/x86/16bit/reset16.inc</a></li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/16bit/entry16.inc">src/cpu/x86/16bit/entry16.inc</a></li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/32bit/entry32.inc">src/cpu/x86/32bit/entry32.inc</a></li>
- <li>The code in
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/bootblock_romcc.S">src/arch/x86/bootblock_romcc.S</a>
- includes src/soc/<Vendor>/<Chip Family>/bootblock/timestamp.inc using the
- CONFIG_CHIPSET_BOOTBLOCK_INCLUDE value set above
- </li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/sse_enable.inc">src/cpu/x86/sse_enable.inc</a></li>
- <li>The code in
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/Makefile.inc;hb=HEAD#l156">src/arch/x86/Makefile.inc</a>
- invokes the ROMCC tool to convert the following "C" code into assembler as bootblock.inc:
- <ul>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/include/arch/bootblock_romcc.h">src/arch/x86/include/arch/bootblock_romcc.h</a></li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/x86/lapic/boot_cpu.c">src/cpu/x86/lapic/boot_cpu.c</a></li>
- <li>The CONFIG_BOOTBLOCK_CPU_INIT value set above typically points to the code in
- src/soc/<Vendor>/<Chip Family>/bootblock/bootblock.c
- </li>
- </ul>
- </li>
- </ul>
- </li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/id.S">src/arch/x86/id.S</a>
- added by <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/Makefile.inc;hb=HEAD#l110">src/arch/x86/Makefile.inc</a>
- </li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/intel/fit/fit.S">src/cpu/intel/fit/fit.S</a>
- added by <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/cpu/intel/fit/Makefile.inc;hb=HEAD">src/cpu/intel/fit/Makefile.inc</a>
- </li>
- <li><a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/walkcbfs.S">src/arch/x86/walkcbfs.S</a>
- added by <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/Makefile.inc;hb=HEAD#l137">src/arch/x86/Makefile.inc</a>
- </li>
-</ul>
-
-
-<hr>
-<h2><a name="TempRamInit">TempRamInit</a></h2>
-<p>
- Enable the call to TempRamInit in two stages:
-</p>
-<ol>
- <li>Finding the FSP binary in the read-only CBFS region</li>
- <li>Call TempRamInit</li>
-</ol>
-
-
-<h3>Find FSP Binary</h3>
-<p>
-Use the following steps to locate the FSP binary:
-</p>
-<ol>
- <li>Edit the src/soc/<Vendor>/<Chip Family>/Kconfig file
- <ol type="A">
- <li>Add "select USE_GENERIC_FSP_CAR_INC" to enable the use of
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc">src/drivers/intel/fsp1_1/cache_as_ram.inc</a>
- </li>
- <li>Add "select SOC_INTEL_COMMON" to enable the use of the files from src/soc/intel/common
- </li>
- </ol>
- </li>
- <li>Debug the result until port 0x80 outputs
- <ol type="A">
- <li>0x90: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>
- - Just before calling
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l73">TempRamInit</a>
- </li>
- <li>Alternating 0xba and 0x01 - The FSP image was not found</li>
- </ol>
- </li>
- <li>Add the <a target="_blank" href="../fsp1_1.html#FspBinary">FSP binary file</a> to the flash image</li>
- <li>Set the following Kconfig values:
- <ul>
- <li>CONFIG_FSP_LOC to the FSP base address specified in the previous step</li>
- <li>CONFIG_FSP_IMAGE_ID_STRING</li>
- </ul>
- </li>
- <li>Debug the result until port 0x80 outputs
- <ol type="A">
- <li>0x90: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>
- - Just before calling
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l73">TempRamInit</a>
- </li>
- <li>Alternating 0xbb and 0x02 - TempRamInit executed, no CPU microcode update found</li>
- </ol>
- </li>
-</ol>
-
-
-<h3>Calling TempRamInit</h3>
-<p>
-Use the following steps to debug the call to TempRamInit:
-</p>
-<ol>
- <li>Add the CPU microcode update file
- <ol type="A">
- <li>Add the microcode file with the following command
-<pre><code>util/cbfstool/cbfstool build/coreboot.rom add -t microcode -n cpu_microcode_blob.bin -b <base address> -f cpu_microcode_blob.bin</code></pre>
- </li>
- <li>Set the Kconfig values
- <ul>
- <li>CONFIG_CPU_MICROCODE_CBFS_LOC set to the value from the previous step</li>
- <li>CONFIG_CPU_MICROCODE_CBFS_LEN</li>
- </ul>
- </li>
- </ol>
- </li>
- <li>Debug the result until port 0x80 outputs
- <ol type="A">
- <li>0x90: <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>
- - Just before calling
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l73">TempRamInit</a>
- </li>
- <li>0x2A - Just before calling
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l151">cache_as_ram_main</a>
- which is the start of the verstage code which may be part of romstage
- </li>
- </ol>
- </li>
-</ol>
-
-
-<hr>
-<h2><a name="Romstage">Romstage</a></h2>
-
-<h3><a name="SerialOutput">Serial Output</a></h3>
-<p>
- The following steps add the serial output support for romstage:
-</p>
-<ol>
- <li>Create the romstage subdirectory</li>
- <li>Add romstage/romstage.c
- <ol type="A">
- <li>Program the necessary base addresses</li>
- <li>Disable the TCO</li>
- </ol>
- </li>
- <li>Add romstage/Makefile.inc
- <ol type="A">
- <li>Add romstage.c to romstage</li>
- </ol>
- </li>
- <li>Add gpio configuration support if necessary</li>
- <li>Add the necessary .h files to support the build</li>
- <li>Update Makefile.inc
- <ol type="A">
- <li>Add the romstage subdirectory</li>
- <li>Add the gpio configuration support file to romstage</li>
- </ol>
- </li>
- <li>Set the necessary Kconfig values to enable serial output:
- <ul>
- <li>CONFIG_DRIVERS_UART_<driver>=y</li>
- <li>CONFIG_CONSOLE_SERIAL=y</li>
- <li>CONFIG_UART_FOR_CONSOLE=<port></li>
- <li>CONFIG_CONSOLE_SERIAL_115200=y</li>
- </ul>
- </li>
-</ol>
-
-
-<h3><a name="PreviousSleepState">Determine Previous Sleep State</a></h3>
-<p>
- The following steps implement the code to get the previous sleep state:
-</p>
-<ol>
- <li>Implement the fill_power_state routine which determines the previous sleep state</li>
- <li>Debug the result until port 0x80 outputs
- <ol type="A">
- <li>0x32:
- - Just after entering
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l99">romstage_common</a>
- </li>
- <li>0x33 - Just after calling
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/romstage.c;hb=HEAD#l113">soc_pre_ram_init</a>
- </li>
- <li>0x34:
- - Just after entering
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l67">raminit</a>
- </li>
- </ol>
-</ol>
-
-
-<h3><a name="MemoryInit">MemoryInit Support</a></h3>
-<p>
- The following steps implement the code to support the FSP MemoryInit call:
-</p>
-<ol>
- <li>Add the chip.h header file to define the UPD values which get passed
- to MemoryInit. Skip the values containing SPD addresses and DRAM
- configuration data which is determined by the board.
- <p>
- <b>Build Note</b>: The src/mainboard/<Vendor>/<Board>/devicetree.cb
- file specifies the default values for these parameters. The build
- process creates the static.c module which contains the config data
- structure containing these values.
- </p>
- </li>
- <li>Edit romstage/romstage.c
- <ol type="A">
- <li>Implement the romstage/romstage.c/soc_memory_init_params routine to
- copy the values from the config structure into the UPD structure
- </li>
- <li>Implement the soc_display_memory_init_params routine to display
- the updated UPD parameters by calling fsp_display_upd_value
- </li>
- </ol>
- </li>
-</ol>
-
-
-<h3><a name="DisableShadowRom">Disable Shadow ROM</a></h3>
-<p>
- A shadow of the SPI flash part is mapped from 0x000e0000 to 0x000fffff.
- This shadow needs to be disabled to allow RAM to properly respond to
- this address range.
-</p>
-<ol>
- <li>Edit romstage/romstage.c and add the soc_after_ram_init routine</li>
-</ol>
-
-
-<hr>
-<h2><a name="Ramstage">Ramstage</a></h2>
-
-<h3><a name="DeviceTree">Start Device Tree Processing</a></h3>
-<p>
- The src/mainboard/<Vendor>/<Board>/devicetree.cb file drives the
- execution during ramstage. This file is processed by the util/sconfig utility
- to generate build/mainboard/<Vendor>/<Board>/static.c. The various
- state routines in
- src/lib/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/lib/hardwaremain.c;hb=HEAD#l128">hardwaremain.c</a>
- call dev_* routines which use the tables in static.c to locate operation tables
- associated with the various chips and devices. After location the operation
- tables, the state routines call one or more functions depending upon the
- state of the state machine.
-</p>
-
-<h4><a name="ChipOperations">Chip Operations</a></h4>
-<p>
- Kick-starting the ramstage state machine requires creating the operation table
- for the chip listed in devicetree.cb:
-</p>
-<ol>
- <li>Edit src/soc/<SoC Vendor>/<SoC Family>/chip.c:
- <ol type="A">
- <li>
- This chip's operation table has the name
- soc_<SoC Vendor>_<SoC Family>_ops which is derived from the
- chip path specified in the devicetree.cb file.
- </li>
- <li>Use the CHIP_NAME macro to specify the name for the chip</li>
- <li>For FSP 1.1, specify a .init routine which calls intel_silicon_init</li>
- </ol>
- </li>
- <li>Edit src/soc/<SoC Vendor>/<SoC Family>/Makefile.inc and add chip.c to ramstage</li>
-</ol>
-
-<h4>Domain Operations</h4>
-<p>
- coreboot uses the domain operation table to initiate operations on all of the
- devices in the domain. By default coreboot enables all PCI devices which it
- finds. Listing a device in devicetree.cb gives the board vendor control over
- the device state. Non-PCI devices may also be listed under PCI device such as
- the LPC bus or SMbus devices.
-</p>
-<ol>
- <li>Edit src/soc/<SoC Vendor>/<SoC Family>/chip.c:
- <ol type="A">
- <li>
- The domain operation table is typically placed in
- src/soc/<SoC Vendor>/<SoC Family>/chip.c.
- The table typically looks like the following:
-<pre><code>static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- .scan_bus = pci_domain_scan_bus,
-};
-</code></pre>
- </li>
- <li>
- Create a .enable_dev entry in the chip operations table which points to a
- routine which sets the domain table for the device with the DEVICE_PATH_DOMAIN.
-<pre><code> if (dev->path.type == DEVICE_PATH_DOMAIN) {
- dev->ops = &pci_domain_ops;
- }
-</code></pre>
- </li>
- <li>
- During the BS_DEV_ENUMERATE state, ramstage now display the device IDs
- for the PCI devices on the bus.
- </li>
- </ol>
- </li>
- <li>Set CONFIG_DEBUG_BOOT_STATE=y in the .config file</li>
- <li>
- Debug the result until the PCI vendor and device IDs are displayed
- during the BS_DEV_ENUMERATE state.
- </li>
-</ol>
-
-
-<h3><a name="DeviceDrivers">PCI Device Drivers</a></h3>
-<p>
- PCI device drivers consist of a ".c" file which contains a "pci_driver" data
- structure at the end of the file with the attribute tag "__pci_driver". This
- attribute tag places an entry into a link time table listing the various
- coreboot device drivers.
-</p>
-<p>
- Specify the following fields in the table:
-</p>
-<ol>
- <li>.vendor - PCI vendor ID value of the device</li>
- <li>.device - PCI device ID value of the device or<br>
- .devices - Address of a zero terminated array of PCI device IDs
- </li>
- <li>.ops - Operations table for the device. This is the address
- of a "static struct device_operations" data structure specifying
- the routines to execute during the different states and sub-states
- of ramstage's processing.
- </li>
- <li>Turn on the device in mainboard/<Vendor>/<Board>/devicetree.cb</li>
- <li>
- Debug until the device is on and properly configured in coreboot and
- usable by the payload
- </li>
-</ol>
-
-<h4><a name="SubsystemIds">Subsystem IDs</a></h4>
-<p>
- PCI subsystem IDs are assigned during the BS_DEV_ENABLE state. The device
- driver may use the common mechanism to assign subsystem IDs by adding
- the ".ops_pci" to the pci_driver data structure. This field points to
- a "struct pci_operations" that specifies a routine to set the subsystem
- IDs for the device. The routine might look something like this:
-</p>
-<pre><code>static void pci_set_subsystem(struct device *dev, unsigned vendor, unsigned device)
-{
- if (!vendor || !device) {
- vendor = pci_read_config32(dev, PCI_VENDOR_ID);
- device = vendor >> 16;
- }
- printk(BIOS_SPEW,
- "PCI: %02x:%02x:%d subsystem vendor: 0x%04x, device: 0x%04x\n",
- 0, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn),
- vendor & 0xffff, device);
- pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
- ((device & 0xffff) << 16) | (vendor & 0xffff));
-}
-</code></pre>
-
-
-
-<h3>Set up the <a name="MemoryMap">Memory Map</a></h3>
-<p>
- The memory map is built by the various PCI device drivers during the
- BS_DEV_RESOURCES state of ramstage. The northcluster driver will typically
- specify the DRAM resources while the other drivers will typically specify
- the IO resources. These resources are hung off the struct device *data structure by
- src/device/device_util.c/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/device/device_util.c;hb=HEAD#l448">new_resource</a>.
-</p>
-<p>
- During the BS_WRITE_TABLES state, coreboot collects these resources and
- places them into a data structure identified by LB_MEM_TABLE.
-</p>
-<p>
- Edit the device driver file:
-</p>
-<ol>
- <li>
- Implement a read_resources routine which calls macros defined in
- src/include/device/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/device/device.h;hb=HEAD#l237">device.h</a>
- like:
- <ul>
- <li>ram_resource</li>
- <li>reserved_ram_resource</li>
- <li>bad_ram_resource</li>
- <li>uma_resource</li>
- <li>mmio_resource</li>
- </ul>
- </li>
-</ol>
-
-<p>
- Testing: Verify that the resources are properly displayed by coreboot during the BS_WRITE_TABLES state.
-</p>
-
-
-
-<hr>
-<h2><a name="AcpiTables">ACPI Tables</a></h2>
-<p>
- One of the payloads that needs ACPI tables is the EDK2 <a target="_blank" href="quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>.
-</p>
-
-<h3>FADT</h3>
-<p>
- The EDK2 module
- CorebootModulePkg/Library/CbParseLib/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootModulePkg/Library/CbParseLib/CbParseLib.c#l450">CbParseLib.c</a>
- requires that the FADT contains the values in the table below.
- These values are placed into a HOB identified by
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootModulePkg/CorebootModulePkg.dec#l36">gUefiAcpiBoardInfoGuid</a>
- by routine
- CorebootModulePkg/CbSupportPei/CbSupportPei/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootModulePkg/CbSupportPei/CbSupportPei.c#l364">CbPeiEntryPoint</a>.
-</p>
-<table border="1">
- <tr bgcolor="#c0ffc0">
- <td>coreboot Field</td>
- <td>EDK2 Field</td>
- <td>gUefiAcpiBoardInfoGuid</td>
- <td>Use</li>
- <td>
- <a target="_blank" href="http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf">ACPI Spec.</a>
- Section
- </td>
- </tr>
- <tr>
- <td>gpe0_blk<br>gpe0_blk_len</td>
- <td>Gpe0Blk<br>Gpe0BlkLen</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootModulePkg/Library/CbParseLib/CbParseLib.c#l477">PmGpeEnBase</a>
- </td>
- <td><a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l129">Shutdown</a></td>
- <td>4.8.4.1</td>
- </tr>
- <tr>
- <td>pm1a_cnt_blk</td>
- <td>Pm1aCntBlk</td>
- <td>PmCtrlRegBase</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l139">Shutdown</a><br>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l40">Suspend</a>
- </td>
- <td>4.8.3.2.1</td>
- </tr>
- <tr>
- <td>pm1a_evt_blk</td>
- <td>Pm1aEvtBlk</td>
- <td>PmEvtBase</td>
- <td><a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l134">Shutdown</a></td>
- <td>4.8.3.1.1</td>
- </tr>
- <tr>
- <td>pm_tmr_blk</td>
- <td>PmTmrBlk</td>
- <td>PmTimerRegBase</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/AcpiTimerLib/AcpiTimerLib.c#l55">Timer</a>
- </td>
- <td>4.8.3.3</td>
- </tr>
- <tr>
- <td>reset_reg.</td>
- <td>ResetReg.Address</td>
- <td>ResetRegAddress</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l71">Cold</a>
- and
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l98">Warm</a>
- resets
- </td>
- <td>4.3.3.6</td>
- </tr>
- <tr>
- <td>reset_value</td>
- <td>ResetValue</td>
- <td>ResetValue</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l71">Cold</a>
- and
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/CorebootPayloadPkg/Library/ResetSystemLib/ResetSystemLib.c#l98">Warm</a>
- resets
- </td>
- <td>4.8.3.6</td>
- </tr>
-</table>
-<p>
- The EDK2 data structure is defined in
- MdeModulePkg/Include/IndustryStandard/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/MdePkg/Include/IndustryStandard/Acpi61.h#l111">Acpi61.h</a>
- The coreboot data structure is defined in
- src/arch/x86/include/arch/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/arch/x86/include/acpi/acpi.h;hb=HEAD#l237">acpi.h</a>
-</p>
-
-<ol>
- <li>
- Select <a target="_blank" href="../Board/board.html#AcpiTables">HAVE_ACPI_TABLES</a>
- in the board's Kconfig file
- </li>
- <li>Create a acpi.c module:
- <ol type="A">
- <li>Add the acpi_fill_fadt routine and initialize the values above</li>
- </ol>
- </li>
-</ol>
-
-
-
-<hr>
-<h2><a name="LegacyHardware">Legacy Hardware</a></h2>
-<p>
- One of the payloads that needs legacy hardare is the EDK2 <a target="_blank" href="quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>.
-</p>
-
-<table border="1">
- <tr bgcolor="c0ffc0">
- <th>Peripheral</th>
- <th>Use</th>
- <th>8259 Interrupt Vector</th>
- <th>IDT Base Offset</th>
- <th>Interrupt Handler</th>
- </tr>
- <tr>
- <td>
- <a target="_blank" href="http://www.scs.stanford.edu/10wi-cs140/pintos/specs/8254.pdf">8254</a>
- Programmable Interval Timer
- </td>
- <td>
- EDK2: PcAtChipsetPkg/8254TimerDxe/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/PcAtChipsetPkg/8254TimerDxe/Timer.c">Timer.c</a>
- </td>
- <td>0</td>
- <td>0x340</td>
- <td>
- <a target="_blank" href="https://github.com/tianocore/edk2/blob/master/PcAtChipsetPkg/8254TimerDxe/Timer.c#l71">TimerInterruptHandler</a>
- </td>
- </tr>
- <tr>
- <td>
- <a target="_blank" href="https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwibxYKU3ZDLAhVOzWMKHfuqB40QFggcMAA&url=http%3A%2F%2Fbochs.sourceforge.net%2Ftechspec%2Fintel-8259a-pic.pdf.gz&usg=AFQjCNF1NT0OQ6ys1Pn6Iv9sv6cKRzZbGg&sig2=HfBszp9xTVO_fajjPWCsJw">8259</a>
- Programmable Interrupt Controller
- </td>
- <td>
- EDK2: PcAtChipsetPkg/8259InterruptControllerDxe/<a target="_blank" href="https://github.com/tianocore/edk2/blob/master/PcAtChipsetPkg/8259InterruptControllerDxe/8259.c">8259.c</a>
- </td>
- <td>
- Master interrupts: 0, 2 - 7<br>
- Slave interrupts: 8 - 15<br>
- Interrupt vector 1 is never generated, the cascaded input generates interrupts 8 - 15
- </td>
- <td>
- Master: 0x340, 0x350 - 0x378<br>
- Slave: 0x380 - 0x3b8<br>
- Interrupt descriptors are 8 bytes each
- </td>
- <td> </td>
- </tr>
-</table>
-
-<hr>
-<p>Modified: 4 March 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/development.html b/Documentation/Intel/development.html
deleted file mode 100644
index 92b1d4b..0000000
--- a/Documentation/Intel/development.html
+++ /dev/null
@@ -1,377 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>Development</title>
- </head>
- <body>
-
-<h1>Intel® x86 coreboot/FSP Development Process</h1>
-<p>
- The x86 development process for coreboot is broken into the following components:
-</p>
-<ul>
- <li>coreboot <a target="_blank" href="SoC/soc.html">SoC</a> development</li>
- <li>coreboot <a target="_blank" href="Board/board.html">mainboard</a> development</li>
- <li><a target="_blank" href="fsp1_1.html">FSP 1.1</a> integration</li>
-</ul>
-<p>
- The development process has two main phases:
-</p>
-<ol>
- <li>Minimal coreboot; This phase is single threaded</li>
- <li>Adding coreboot features</li>
-</ol>
-
-<h2>Minimal coreboot</h2>
-<p>
- The combined steps below describe how to bring up a minimal coreboot for a
- system-on-a-chip (SoC) and a development board:
-</p>
-<table>
- <tr bgcolor="#ffffc0">
- <td>The initial coreboot steps are single threaded!
- The initial minimal FSP development is also single threaded.
- Progress can speed up by adding more developers after the minimal coreboot/FSP
- implementation reaches the payload.
- </td>
- </tr>
-</table>
-<ol>
- <li>Get the necessary tools:
- <ul>
- <li>Linux: Use your package manager to install m4 bison flex and the libcurses development
- package.
- <ul>
- <li>Ubuntu or other Linux distribution that use apt, run:
-<pre><code>sudo apt-get install m4 bison flex libncurses5-dev
-</code></pre>
- </li>
- </ul>
- </li>
- </ul>
- </li>
- <li>Build the cross tools for i386:
- <ul>
- <li>Linux:
-<pre><code>make crossgcc-i386</code></pre>
- To use multiple processors for the toolchain build (which takes a long time), use:
-<pre><code>make crossgcc-i386 CPUS=N</code></pre>
- where N is the number of cores to use for the build.
- </li>
- </ul>
- </li>
- <li>Get something to build:
- <ol type="A">
- <li><a target="_blank" href="fsp1_1.html#RequiredFiles">FSP 1.1</a> required files</li>
- <li><a target="_blank" href="SoC/soc.html#RequiredFiles">SoC</a> required files</li>
- <li><a target="_blank" href="Board/board.html#RequiredFiles">Board</a> required files</li>
- </ol>
- </li>
- <li>Get result to start <a target="_blank" href="SoC/soc.html#Descriptor">booting</a></li>
- <li><a target="_blank" href="SoC/soc.html#EarlyDebug">Early Debug</a></li>
- <li>Implement and debug the <a target="_blank" href="SoC/soc.html#Bootblock">bootblock</a> code</li>
- <li>Implement and debug the call to <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a></li>
- <li>Enable the serial port
- <ol type="A">
- <li>Power on, enable and configure GPIOs for the
- <a target="_blank" href="Board/board.html#SerialOutput">debug serial UART</a>
- </li>
- <li>Add the <a target="_blank" href="SoC/soc.html#SerialOutput">serial outupt</a>
- support to romstage
- </li>
- </ol>
- </li>
- <li>Enable <a target="_blank" href="fsp1_1.html#corebootFspDebugging">coreboot/FSP</a> debugging</li>
- <li>Determine the <a target="_blank" href="SoC/soc.html#PreviousSleepState">Previous Sleep State</a></li>
- <li>Enable DRAM:
- <ol type="A">
- <li>Implement the SoC
- <a target="_blank" href="SoC/soc.html#MemoryInit">MemoryInit</a>
- Support
- </li>
- <li>Implement the board support to read the
- <a target="_blank" href="Board/board.html#SpdData">Memory Timing Data</a>
- </li>
- </ol>
- </li>
- <li>Disable the
- <a target="_blank" href="SoC/soc.html#DisableShadowRom">Shadow ROM</a>
- </li>
- <li>Enable CONFIG_DISPLAY_MTRRS to verify the MTRR configuration</li>
- <li>
- Implement the .init routine for the
- <a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a>
- structure which calls FSP SiliconInit
- </li>
- <li>
- Start ramstage's
- <a target="_blank" href="SoC/soc.html#DeviceTree">device tree processing</a>
- to display the PCI vendor and device IDs
- </li>
- <li>
- Disable the
- <a target="_blank" href="Board/board.html#DisablePciDevices">PCI devices</a>
- </li>
- <li>
- Implement the
- <a target="_blank" href="SoC/soc.html#MemoryMap">memory map</a>
- </li>
- <li>coreboot should now attempt to load the payload</li>
-</ol>
-
-
-
-<h2>Add coreboot Features</h2>
-<p>
- Most of the coreboot development gets done in this phase. Implementation tasks in this
- phase are easily done in parallel.
-</p>
-<ul>
- <li>Payload and OS Features:
- <ul>
- <li><a target="_blank" href="SoC/soc.html#AcpiTables">ACPI Tables</a></li>
- <li><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</li>
- </ul>
- </li>
-</ul>
-
-
-
-<hr>
-<table border="1">
- <tr bgcolor="#c0ffc0">
- <th colspan=3><h1>Features</h1></th>
- </tr>
- <tr bgcolor="#c0ffc0">
- <th>SoC</th>
- <th>Where</th>
- <th>Testing</th>
- </tr>
- <tr>
- <td>8254 Programmable Interval Timer</td>
- <td><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</td>
- <td><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a> gets to shell prompt</td>
- </tr>
- <tr>
- <td>8259 Programmable Interrupt Controller</td>
- <td><a target="_blank" href="SoC/soc.html#LegacyHardware">Legacy hardware</a> support</td>
- <td><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a> gets to shell prompt</td>
- </tr>
- <tr>
- <td>Cache-as-RAM</td>
- <td>
- <a target="_blank" href="SoC/soc.html#TempRamInit">Find</a>
- FSP binary:
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l38">cache_as_ram.inc</a><br>
- Enable: FSP 1.1 <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a>
- called from
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l73">cache_as_ram.inc</a><br>
- Disable: FSP 1.1 TempRamExit called from
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l41">after_raminit.S</a><br>
- </td>
- <td>FindFSP: POST code 0x90
- (<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>)
- is displayed<br>
- Enable: POST code
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l151">0x2A</a>
- is displayed<br>
- Disable: CONFIG_DISPLAY_MTRRS=y, MTRRs displayed after call to TempRamExit
- </td>
- </tr>
- <tr>
- <td>Memory Map</td>
- <td>
- Implement a device driver for the
- <a target="_blank" href="SoC/soc.html#MemoryMap">north cluster</a>
- </td>
- <td>coreboot displays the memory map correctly during the BS_WRITE_TABLES state</td>
- </tr>
- <tr>
- <td>MTRRs</td>
- <td>
- Set values: src/drivers/intel/fsp1_1/stack.c/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/stack.c;hb=HEAD#l42">setup_stack_and_mtrrs</a><br>
- Load values: src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l71">after_raminit.S</a>
- </td>
- <td>Set: Post code 0x91
- (<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l213">POST_FSP_TEMP_RAM_EXIT</a>)
- is displayed by
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l41">after_raminit.S</a><br>
- Load: Post code 0x3C is displayed by
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l152">after_raminit.S</a><br>
- and CONFIG_DISPLAY_MTRRS=y displays the correct memory regions</td>
- </tr>
- <tr>
- <td>PCI Device Support</td>
- <td>Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a></td>
- <td>The device is detected by coreboot and usable by the payload</td>
- </tr>
- <tr>
- <td>Ramstage state machine</td>
- <td>
- Implement the chip and domain operations to start the
- <a target="_blank" href="SoC/soc.html#DeviceTree">device tree</a>
- processing
- </td>
- <td>
- During the BS_DEV_ENUMERATE state, ramstage now display the device IDs
- for the PCI devices on the bus.
- </td>
- </tr>
- <tr>
- <td>ROM Shadow<br>0x000E0000 - 0x000FFFFF</td>
- <td>
- Disable: src/soc/<Vendor>/<Chip Family>/romstage/romstage.c/<a target="_blank" href="SoC/soc.html#DisableShadowRom">soc_after_ram_init routine</a>
- </td>
- <td>Operates as RAM: Writes followed by a read to the 0x000E0000 - 0x000FFFFF region returns the value written</td>
- </tr>
-
-
- <tr bgcolor="#c0ffc0">
- <th>Board</th>
- <th>Where</th>
- <th>Testing</th>
- </tr>
- <tr>
- <td>Device Tree</td>
- <td>
- <a target="_blank" href="SoC/soc.html#DeviceTree">List</a> PCI vendor and device IDs by starting
- the device tree processing<br>
- <a target="_blank" href="Board/board.html#DisablePciDevices">Disable</a> PCI devices<br>
- Enable: Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a>
- <td>
- List: BS_DEV_ENUMERATE state displays PCI vendor and device IDs<br>
- Disable: BS_DEV_ENUMERATE state shows the devices as disabled<br>
- Enable: BS_DEV_ENUMERATE state shows the device as on and the device works for the payload
- </td>
- </tr>
- <tr>
- <td>DRAM</td>
- <td>
- Load SPD data: src/soc/mainboard/<Vendor>/<Board>/spd/<a target="_blank" href="Board/board.html#SpdData">spd.c</a><br>
- UPD Setup:
- <ul>
- <li>src/soc<Vendor>//<Chip Family>/romstage/<a target="_blank" href="SoC/soc.html#MemoryInit">romstage.c</a></li>
- <li>src/mainboard/<Vendor>/<Board>/<a target="_blank" href="Board/board.html#SpdData">romstage.c</a></li>
- </ul>
- FSP 1.1 MemoryInit called from src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/raminit.c;hb=HEAD#l126">raminit.c</a>
- </td>
- <td>Select the following Kconfig values
- <ul>
- <li>DISPLAY_HOBS</li>
- <li>DISPLAY_UPD_DATA</li>
- </ul>
- Testing successful if:
- <ul>
- <li>MemoryInit UPD values are correct</li>
- <li>MemoryInit returns 0 (success) and</li>
- <li>The message "ERROR - coreboot's requirements not met by FSP binary!"
- is not displayed
- </li>
- </ul>
- </td>
- </tr>
- <tr>
- <td>Serial Port</td>
- <td>
- SoC <a target="_blank" href="SoC/soc.html#SerialOutput">Support</a><br>
- Enable: src/soc/mainboard/<Board>/com_init.c/<a target="_blank" href="Board/board.html#SerialOutput">car_mainboard_pre_console_init</a>
- </td>
- <td>Debug serial output works</td>
- </tr>
-
-
- <tr bgcolor="#c0ffc0">
- <th>Payload</th>
- <th>Where</th>
- <th>Testing</th>
- </tr>
- <tr>
- <td>ACPI Tables</td>
- <td>
- SoC <a target="_blank" href="SoC/soc.html#AcpiTables">Support</a><br>
- </td>
- <td>Verified by payload or OS</td>
- </tr>
-
-
- <tr bgcolor="#c0ffc0">
- <th>FSP</th>
- <th>Where</th>
- <th>Testing</th>
- </tr>
- <tr>
- <td>TempRamInit</td>
- <td>FSP <a target="_blank" href="SoC/soc.html#TempRamInit">TempRamInit</a></td>
- <td>FSP binary found: POST code 0x90
- (<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l205">POST_FSP_TEMP_RAM_INIT</a>)
- is displayed<br>
- TempRamInit successful: POST code
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/cache_as_ram.inc;hb=HEAD#l151">0x2A</a>
- is displayed<br>
- </td>
- </tr>
- <tr>
- <td>MemoryInit</td>
- <td><a target="_blank" href="SoC/soc.html#MemoryInit">SoC</a> support<br>
- <a target="_blank" href="Board/board.html#SpdData">Board</a> support<br>
- </td>
- <td>Select the following Kconfig values
- <ul>
- <li>DISPLAY_HOBS</li>
- <li>DISPLAY_UPD_DATA</li>
- </ul>
- Testing successful if:
- <ul>
- <li>MemoryInit UPD values are correct</li>
- <li>MemoryInit returns 0 (success) and</li>
- <li>The message "ERROR - coreboot's requirements not met by FSP binary!"
- is not displayed
- </li>
- </ul>
- </td>
- </tr>
- <tr>
- <td>TempRamExit</td>
- <td>src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l51">after_raminit.S</a></td>
- <td>Post code 0x91
- (<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/console/post_codes.h;hb=HEAD#l212">POST_FSP_TEMP_RAM_EXIT</a>)
- is displayed before calling TempRamExit by
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l141">after_raminit.S</a>,
- CONFIG_DISPLAY_MTRRS=y displays the correct memory regions and
- Post code 0x39 is displayed by
- <a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/after_raminit.S;hb=HEAD#l141">after_raminit.S</a><br>
- </td>
- </tr>
- <tr>
- <td>SiliconInit</td>
- <td>
- Implement the .init routine for the
- <a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a> structure
- </td>
- <td>During BS_DEV_INIT_CHIPS state, SiliconInit gets called and returns 0x00000000</td>
- </tr>
- <tr>
- <td>FspNotify</td>
- <td>
- The code which calls FspNotify is located in
- src/drivers/intel/fsp1_1/<a target="_blank" href="https://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/fsp_util.c;hb=HEAD#l182">fsp_util.c</a>.
- The fsp_notify_boot_state_callback routine is called three times as specified
- by the BOOT_STATE_INIT_ENTRY macros below the routine.
- </td>
- <td>
- The FspNotify routines are called during:
- <ul>
- <li>BS_DEV_RESOURCES - on exit</li>
- <li>BS_PAYLOAD_LOAD - on exit</li>
- <li>BS_OS_RESUME - on entry (S3 resume)</li>
- </ul>
- </td>
- </tr>
-</table>
-
-
-
-<hr>
-<p>Modified: 4 March 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/fsp1_1.html b/Documentation/Intel/fsp1_1.html
deleted file mode 100644
index 94cb6bf..0000000
--- a/Documentation/Intel/fsp1_1.html
+++ /dev/null
@@ -1,79 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>FSP 1.1</title>
- </head>
- <body>
-
-<h1>FSP 1.1</h1>
-
-<h2>x86 FSP 1.1 Integration</h2>
-<p>
- Firmware Support Package (FSP) integration requires System-on-a-Chip (SoC)
- and board support. The combined steps are listed
- <a target="_blank" href="development.html">here</a>.
- The development steps for FSP are listed below:
-</p>
-<ol>
- <li><a href="#RequiredFiles">Required Files</a></li>
- <li>Add the <a href="#FspBinary">FSP Binary File</a> to the coreboot File System</li>
- <li>Enable <a href="#corebootFspDebugging">coreboot/FSP Debugging</a></li>
-</ol>
-
-<p>
- FSP Documentation:
-</p>
-<ul>
- <li>Intel® Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v1-1.pdf">V1.1</a></li>
-</ul>
-
-<hr>
-<h2><a name="RequiredFiles">Required Files</a></h2>
-<h3><a name="corebootRequiredFiles">coreboot Required Files</a></h3>
-<ol>
- <li>Create the following directories if they do not already exist:
- <ul>
- <li>src/vendorcode/intel/fsp/fsp1_1/<Chip Family></li>
- <li>3rdparty/blobs/mainboard/<Board Vendor>/<Board Name></li>
- </ul>
- </li>
- <li>
- The following files may need to be copied from the FSP build or release into the
- directories above if they are not present or are out of date:
- <ul>
- <li>FspUpdVpd.h: src/vendorcode/intel/fsp/fsp1_1/<Chip Family>/FspUpdVpd.h</li>
- <li>FSP.bin: 3rdparty/blobs/mainboard/<Board Vendor>/<Board Name>/fsp.bin</li>
- </ul>
- </li>
-</ol>
-
-
-<hr>
-<h2><a name="FspBinary">Add the FSP Binary File to coreboot File System</a></h2>
-<p>
- Add the FSP binary to the coreboot flash image using the following command:
-</p>
-<pre><code>util/cbfstool/cbfstool build/coreboot.rom add -t fsp -n fsp.bin -b <base address> -f fsp.bin</code></pre>
-<p>
- This command relocates the FSP binary to the 4K byte aligned location in CBFS so that the
- FSP code for TempRamInit may be executed in place.
-</p>
-
-
-<hr>
-<h2><a name="corebootFspDebugging">Enable coreboot/FSP Debugging</a></h2>
-<p>
- Set the following Kconfig values:
-</p>
-<ul>
- <li>CONFIG_DISPLAY_FSP_ENTRY_POINTS - Display the FSP entry points in romstage</li>
- <li>CONFIG_DISPLAY_HOBS - Display and verify the hand-off-blocks (HOBs) returned by MemoryInit</li>
- <li>CONFIG_DISPLAY_VBT - Display Video BIOS Table (VBT) used for GOP</li>
- <li>CONFIG_DISPLAY_UPD_DATA - Display the user specified product data passed to MemoryInit and SiliconInit</li>
-</ul>
-
-
-<hr>
-<p>Modified: 17 May 2016</p>
- </body>
-</html>
diff --git a/Documentation/Intel/index.html b/Documentation/Intel/index.html
deleted file mode 100644
index 9d8aad0..0000000
--- a/Documentation/Intel/index.html
+++ /dev/null
@@ -1,128 +0,0 @@
-<!DOCTYPE html>
-<html>
- <head>
- <title>Intel® x86</title>
- </head>
- <body>
-
-<h1>Intel® x86</h1>
-
-<h2>Intel® x86 Boards</h2>
-<ul>
- <li><a target="_blank" href="Board/galileo.html">Galileo</a></li>
- <li><a target="_blank" href="http://wiki.minnowboard.org/Coreboot">MinnowBoard MAX</a></li>
-</ul>
-
-<h2>Intel® x86 SoCs</h2>
-<ul>
- <li><a target="_blank" href="SoC/quark.html">Quark™</a></li>
-</ul>
-
-
-
-<hr>
-<h2>x86 coreboot Development</h2>
-<ul>
- <li>Get the <a target="_blank" href="https://www.coreboot.org/Git">coreboot source</li>
- <li><a target="_blank" href="development.html">Overall</a> development</li>
- <li><a target="_blank" href="fsp1_1.html">FSP 1.1</a> integration
- </li>
- <li><a target="_blank" href="SoC/soc.html">SoC</a> support</li>
- <li><a target="_blank" href="Board/board.html">Board</a> support</li>
-</ul>
-
-
-
-<hr>
-<h2>Payload Development</h2>
-<ul>
- <li><a target="_blank" href="SoC/quark.html#CorebootPayloadPkg">CorebootPayloadPkg</a>
- <ul>
- <li><a target="_blank" href="https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Development-Process">EDK II Development Process</a></li>
- <li>EDK II <a target="_blank" href="https://github.com/tianocore/tianocore.github.io/wiki/EDK%20II%20White%20papers">White Papers</a></li>
- <li><a target="_blank" href="https://github.com/tianocore/tianocore.github.io/wiki/SourceForge-to-Github-Quick-Start">SourceForge to Github Quick Start</a></li>
- <li>UEFI <a target="_blank" href="http://www.uefi.org/sites/default/files/resources/UEFI%20Spec%202_5_Errata_A.PDF">2.5 Errata A</a></li>
- </ul>
- </li>
-</ul>
-
-
-
-<hr>
-<h2><a name="Documentation">Documentation</a></h2>
-<ul>
- <li>Intel® 64 and IA-32 Architectures <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf">Software Developer Manual</a></li>
- <li><a target="_blank" href="http://www.uefi.org/specifications">UEFI Specifications</a></li>
-</ul>
-
-<h3><a name="Edk2Documentation">EDK-II Documentation</a></h3>
-<ul>
- <li>Build <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/Build_Spec_1_26.pdf">V1.26</a></li>
- <li>Coding Standards <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/CCS_2_1_Draft.pdf">V2.1</a></li>
- <li>DEC <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/DEC_Spec_1_25.pdf">V1.25</a></li>
- <li>DSC <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/DSC_Spec_1_26.pdf">V1.26</a></li>
- <li><a target="_blank" href="https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Driver-Writer's-Guide">Driver Writer's Guide</a></li>
- <li>Expression Syntax <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/ExpressionSyntax_1.1.pdf">V1.1</a></li>
- <li>FDF <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/FDF_Spec_1_26.pdf">V1.26</a></li>
- <li>INF <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/INF_Spec_1_25.pdf">V1.25</a></li>
- <li>PCD <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/PCD_Infrastructure.pdf">PCD</a>V0.55</li>
- <li>UNI <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/UNI_File_Spec_v1_2_Errata_A.pdf">V1.2 Errata A</a></li>
- <li>VRF <a target="_blank" href="https://github.com/tianocore-docs/Docs/raw/master/Specifications/VFR_1_9.pdf">V1.9</a></li>
-</ul>
-
-<h3><a name="FspDocumentation">FSP Documentation</a></h3>
-<ul>
- <li>Intel® Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v2.pdf">V2.0</a></li>
- <li>Intel® Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v1-1.pdf">V1.1</a></li>
- <li>Intel® Firmware Support Package External Architecture Specification <a target="_blank" href="http://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec.pdf">V1.0</a></li>
-</ul>
-
-<h3><a name="FeatureDocumentation">Feature Documentation</a></h3>
-<table border="1">
- <tr bgcolor="#c0ffc0"><th>Feature/Specification</th><th>Linux View/Test</th><th>EDK-II View/Test</th></tr>
- <tr>
- <td><a target="_blank" href="https://en.wikipedia.org/wiki/E820">e820</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man1/dmesg.1.html">dmesg</a></td>
- <td> </td>
- </tr>
- <tr>
- <td><a target="_blank" href="http://www.uefi.org/specifications">ACPI</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/precise/man1/acpidump.1.html">acpidump</a></td>
- <td> </td>
- </tr>
- <tr>
- <td><a target="_blank" href="https://en.wikipedia.org/wiki/Extended_Display_Identification_Data">EDID</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man1/get-edid.1.html">get-edid | parse-edid</a></td>
- <td> </td>
- </tr>
- <tr>
- <td><a target="_blank" href="http://www.nxp.com/documents/user_manual/UM10204.pdf">I2C</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man1/get-edid.1.html">i2cdetect</a></td>
- <td> </td>
- </tr>
- <tr>
- <td><a target="_blank" href="http://www.intel.com/design/archives/processors/pro/docs/242016.htm">Multiprocessor</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man1/lscpu.1.html">lscpu</a></td>
- <td> </td>
- </tr>
- <tr>
- <td><a target="_blank" href="https://pcisig.com/specifications">PCI</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man8/lspci.8.html">lspci</a></td>
- <td><a target="_blank" href="http://www.uefi.org/sites/default/files/resources/UEFI_Shell_Spec_2_0.pdf">pci</a></td>
- </tr>
- <tr>
- <td><a target="_blank" href="https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.0.0.pdf">SMBIOS</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/trusty/man8/dmidecode.8.html">dmidecode</a></td>
- <td><a target="_blank" href="http://www.uefi.org/sites/default/files/resources/UEFI_Shell_Spec_2_0.pdf">smbiosview</a></td>
- </tr>
- <tr>
- <td><a target="_blank" href="http://www.usb.org/developers/docs/">USB</a></td>
- <td><a target="_blank" href="http://manpages.ubuntu.com/manpages/xenial/man8/lsusb.8.html">lsusb</a></td>
- <td> </td>
- </tr>
-</table>
-
-<hr>
-<p>Modified: 18 June 2016</p>
- </body>
-</html>