mainboard/bap/ode_e21XX: Add copy of amd/olivehillplus
Initial copy of olivehillplus.
Change-Id: Ibe9b450c05bfad15a95852addb1465ac2d3cef61
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: https://review.coreboot.org/15917
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c
new file mode 100644
index 0000000..a5c529e
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/romstage.c
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <commonlib/loglevel.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <northbridge/amd/pi/agesawrapper_call.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <cpu/amd/pi/s3_resume.h>
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+
+ /*
+ * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+ * LpcClk[1:0]". This following register setting has been
+ * replicated in every reference design since Parmer, so it is
+ * believed to be required even though it is not documented in
+ * the SoC BKDGs. Without this setting, there is no serial
+ * output.
+ */
+ outb(0xD2, 0xcd6);
+ outb(0x00, 0xcd7);
+
+ amd_initmmio();
+
+ hudson_lpc_port80();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+
+ post_code(0x31);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ /*
+ * This refers to LpcClkDrvSth settling time. Without this setting, processor
+ * initialization is slow or incorrect, so this wait has been replicated from
+ * earlier development boards.
+ */
+ {
+ int i;
+ for(i = 0; i < 200000; i++) inb(0xCD6);
+ }
+
+ post_code(0x37);
+ AGESAWRAPPER(amdinitreset);
+
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past avalon_early_setup\n");
+
+ post_code(0x39);
+ AGESAWRAPPER(amdinitearly);
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ AGESAWRAPPER(amdinitpost);
+
+ //PspMboxBiosCmdDramInfo();
+ post_code(0x41);
+ AGESAWRAPPER(amdinitenv);
+ /*
+ If code hangs here, please check cahaltasm.S
+ */
+ disable_cache_as_ram();
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ AGESAWRAPPER(amdinitresume);
+
+ AGESAWRAPPER(amds3laterestore);
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+
+ outb(0xEA, 0xCD6);
+ outb(0x1, 0xcd7);
+
+ post_code(0x50);
+ copy_and_run();
+
+ post_code(0x54); /* Should never see this post code. */
+}