Add support for Sandybridge based Samsung ChromeBook
Change-Id: I8bf439bc903c1ec105016866753c7cb9ccfe5974
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/952
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/mainboard/samsung/Kconfig b/src/mainboard/samsung/Kconfig
new file mode 100644
index 0000000..543398a
--- /dev/null
+++ b/src/mainboard/samsung/Kconfig
@@ -0,0 +1,17 @@
+if VENDOR_SAMSUNG
+
+choice
+ prompt "Mainboard model"
+
+config BOARD_SAMSUNG_LUMPY
+ bool "Lumpy"
+
+endchoice
+
+source "src/mainboard/samsung/lumpy/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "SAMSUNG"
+
+endif # VENDOR_SAMSUNG
diff --git a/src/mainboard/samsung/lumpy/Kconfig b/src/mainboard/samsung/lumpy/Kconfig
new file mode 100644
index 0000000..200edac
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/Kconfig
@@ -0,0 +1,59 @@
+if BOARD_SAMSUNG_LUMPY
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_X86
+ select BOARD_HAS_FADT
+ select BOARD_ROMSIZE_KB_8192
+ select CHROMEOS
+ select CPU_INTEL_SOCKET_RPGA989
+ select EC_SMSC_MEC1308
+ select EXTERNAL_MRC_BLOB
+ select GFXUMA
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select HAVE_MAINBOARD_RESOURCES
+ select HAVE_OPTION_TABLE
+ select HAVE_SMI_HANDLER
+ select MMCONF_SUPPORT
+ select NORTHBRIDGE_INTEL_SANDYBRIDGE
+ select SOUTHBRIDGE_INTEL_BD82X6X
+ select SUPERIO_SMSC_MEC1308
+
+config MAINBOARD_DIR
+ string
+ default samsung/lumpy
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "Lumpy"
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+
+config IRQ_SLOT_COUNT
+ int
+ default 18
+
+config MAX_CPUS
+ int
+ default 8
+
+config VGA_BIOS_FILE
+ string
+ default "pci8086,0106.rom"
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x1ae0
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0xc000
+
+config MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+ bool
+ default n
+
+endif # BOARD_SAMSUNG_LUMPY
diff --git a/src/mainboard/samsung/lumpy/Makefile.inc b/src/mainboard/samsung/lumpy/Makefile.inc
new file mode 100644
index 0000000..f25aaa5
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/Makefile.inc
@@ -0,0 +1,35 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+ramstage-y += ec.c
+
+romstage-$(CONFIG_CHROMEOS) += chromeos.c
+ramstage-$(CONFIG_CHROMEOS) += chromeos.c
+
+smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c
+SPD_BIN = $(obj)/spd.bin
+
+# Include spd rom data
+$(SPD_BIN):
+ xxd -rg1 $(src)/mainboard/samsung/lumpy/spd.hex >| $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := 0xab
+spd.bin-position := 0xfffdc000
diff --git a/src/mainboard/samsung/lumpy/acpi/chromeos.asl b/src/mainboard/samsung/lumpy/acpi/chromeos.asl
new file mode 100644
index 0000000..fc7be20
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/chromeos.asl
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Device (CRHW)
+{
+ Name(_HID, EISAID("GGL0001"))
+
+ Method(_STA, 0, Serialized)
+ {
+ Return (0xb)
+ }
+
+ Method(CHSW, 0, Serialized)
+ {
+ Name (WSHC, Package() { VBT3 })
+ Return (WSHC)
+ }
+
+ Method(FWID, 0, Serialized)
+ {
+ Name (DIW1, "")
+ ToString(VBT5, 63, DIW1)
+ Name (DIWF, Package() { DIW1 })
+ Return(DIWF)
+ }
+
+ Method(FRID, 0, Serialized)
+ {
+ Name (DIR1, "")
+ ToString(VBT6, 63, DIR1)
+ Name (DIRF, Package() { DIR1 })
+ Return (DIRF)
+ }
+
+ Method(HWID, 0, Serialized)
+ {
+ Name (DIW0, "")
+ ToString(VBT4, 255, DIW0)
+ Name (DIWH, Package() { DIW0 })
+ Return (DIWH)
+ }
+
+ Method(BINF, 0, Serialized)
+ {
+ Name (FNIB, Package() { VBT0, VBT1, VBT2, VBT7, VBT8 })
+ Return (FNIB)
+ }
+
+ Method(GPIO, 0, Serialized)
+ {
+ Name(OIPG, Package() {
+ Package() { 0x001, 0, 42, "CougarPoint" }, // recovery button
+ Package() { 0x002, 1, 17, "CougarPoint" }, // developer switch
+ Package() { 0x003, 1, 24, "CougarPoint" }, // firmware write protect
+ })
+ Return (OIPG)
+
+ }
+
+ Method(VBNV, 0, Serialized)
+ {
+ Name(VNBV, Package() {
+ // See src/vendorcode/google/chromeos/Kconfig
+ // for the definition of these:
+ CONFIG_VBNV_OFFSET,
+ CONFIG_VBNV_SIZE
+ })
+ Return(VNBV)
+ }
+
+ Method(VDAT, 0, Serialized)
+ {
+ Name(TAD0,"")
+ ToBuffer(CHVD, TAD0)
+ Name (TADV, Package() { TAD0 })
+ Return (TADV)
+ }
+
+ Method(FMAP, 0, Serialized)
+ {
+ Name(PAMF, Package() { VBT9 })
+ Return(PAMF)
+ }
+
+ Method(MECK, 0, Serialized)
+ {
+ Name(HASH, Package() { MEHH })
+ Return(HASH)
+ }
+
+ Method(MLST, 0, Serialized)
+ {
+ Name(TSLM, Package() { "CHSW", "FWID", "HWID", "FRID", "BINF",
+ "GPIO", "VBNV", "VDAT", "FMAP", "MECK"
+ })
+ Return (TSLM)
+ }
+}
diff --git a/src/mainboard/samsung/lumpy/acpi/ec.asl b/src/mainboard/samsung/lumpy/acpi/ec.asl
new file mode 100644
index 0000000..21602c2
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/ec.asl
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* EC configuration */
+#define EC_GPE 23 // GPE23 -> Runtime SCI
+
+#include <ec/smsc/mec1308/acpi/ec.asl>
+
diff --git a/src/mainboard/samsung/lumpy/acpi/mainboard.asl b/src/mainboard/samsung/lumpy/acpi/mainboard.asl
new file mode 100644
index 0000000..b1ab678
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/mainboard.asl
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+Scope (\_SB) {
+ Device (LID0)
+ {
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS)
+ Return (\LIDS)
+ }
+
+ // WAKE SCI# from EC is GPIO14
+ Name(_PRW, Package(){0x1e, 0x05})
+ }
+
+ Device (PWRB)
+ {
+ Name(_HID, EisaId("PNP0C0C"))
+ }
+
+ Device (TPAD)
+ {
+ // Report as a Sleep Button device so
+ // Linux will automatically enable for wake
+ Name(_HID, EisaId("PNP0C0E"))
+
+ // Trackpad Wake is GPIO11
+ Name(_PRW, Package(){0x1b, 0x03})
+
+ Name(_CRS, ResourceTemplate()
+ {
+ // PIRQF -> GSI21
+ Interrupt (ResourceConsumer, Edge, ActiveLow) {21}
+
+ // SMBUS Address 0x67
+ VendorShort (ADDR) {0x67}
+ })
+ }
+
+ Device (LITE)
+ {
+ // Generic ACPI Device Container
+ Name(_HID, EisaId("PNP0A05"))
+
+ Name(_CRS, ResourceTemplate()
+ {
+ // PIRQE -> GSI20
+ Interrupt (ResourceConsumer, Edge, ActiveLow) {20}
+
+ // SMBUS Address 0x44
+ VendorShort (ADDR) {0x44}
+ })
+ }
+}
+
+// Battery information
+Name (BATV, "SAMSUNG")
+Name (BATM, "LUMPY")
+Name (BATS, "BATTERY")
diff --git a/src/mainboard/samsung/lumpy/acpi/platform.asl b/src/mainboard/samsung/lumpy/acpi/platform.asl
new file mode 100644
index 0000000..39a29e7
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/platform.asl
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* The APM port can be used for generating software SMIs */
+
+OperationRegion (APMP, SystemIO, 0xb2, 2)
+Field (APMP, ByteAcc, NoLock, Preserve)
+{
+ APMC, 8, // APM command
+ APMS, 8 // APM status
+}
+
+/* Port 80 POST */
+
+OperationRegion (POST, SystemIO, 0x80, 1)
+Field (POST, ByteAcc, Lock, Preserve)
+{
+ DBG0, 8
+}
+
+/* SMI I/O Trap */
+Method(TRAP, 1, Serialized)
+{
+ Store (Arg0, SMIF) // SMI Function
+ Store (0, TRP0) // Generate trap
+ Return (SMIF) // Return value of SMI handler
+}
+
+/* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+
+Method(_PIC, 1)
+{
+ // Remember the OS' IRQ routing choice.
+ Store(Arg0, PICM)
+}
+
+/* The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0
+ */
+
+Method(_PTS,1)
+{
+ Store (Zero, GP35) // Disable WLAN
+ Store (Zero, GP38) // Disable WWAN
+
+ If (S33G) {
+ Store (Zero, GP43) // Enable HSPA
+ } Else {
+ Store (One, GP43) // Disable HSPA
+ }
+
+ If (LEqual (Arg0, 3)) {
+ // NVS has a flag to determine USB policy in S3
+ If (S3U0) {
+ Store (One, GP47) // Enable USB0
+ } Else {
+ Store (Zero, GP47) // Disable USB0
+ }
+
+ // NVS has a flag to determine USB policy in S3
+ If (S3U1) {
+ Store (One, GP56) // Enable USB1
+ } Else {
+ Store (Zero, GP56) // Disable USB1
+ }
+ }
+ If (LEqual (Arg0, 5)) {
+ // NVS has a flag to determine USB policy in S5
+ If (S5U0) {
+ Store (One, GP47) // Enable USB0
+ } Else {
+ Store (Zero, GP47) // Disable USB0
+ }
+
+ // NVS has a flag to determine USB policy in S5
+ If (S5U1) {
+ Store (One, GP56) // Enable USB1
+ } Else {
+ Store (Zero, GP56) // Disable USB1
+ }
+ }
+}
+
+/* The _WAK method is called on system wakeup */
+
+Method(_WAK,1)
+{
+ /* Update in case state changed while asleep */
+ Store (\_SB.PCI0.LPCB.EC0.ACEX, \PWRS)
+
+ /* Enable OS control of fan */
+ Store (One, \_SB.PCI0.LPCB.EC0.FCOS)
+
+ Return(Package(){0,0})
+}
+
diff --git a/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl b/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl
new file mode 100644
index 0000000..179376e
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/sandybridge_pci_irqs.asl
@@ -0,0 +1,69 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* This is board specific information: IRQ routing for Sandybridge */
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ If (PICM) {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, 0, 16 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, 0, 22 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, 0, 17 },
+ Package() { 0x001cffff, 1, 0, 18 },
+ Package() { 0x001cffff, 2, 0, 19 },
+ Package() { 0x001cffff, 3, 0, 16 },
+ // EHCI #1 0:1d.0
+ Package() { 0x001dffff, 0, 0, 19 },
+ // EHCI #2 0:1a.0
+ Package() { 0x001affff, 0, 0, 17 },
+ // LPC devices 0:1f.0
+ Package() { 0x001fffff, 0, 0, 16 },
+ Package() { 0x001fffff, 1, 0, 22 },
+ Package() { 0x001fffff, 2, 0, 23 },
+ Package() { 0x001fffff, 3, 0, 17 },
+ })
+ } Else {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKD, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKE, 0 },
+ // EHCI #1 0:1d.0
+ Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
+ // EHCI #2 0:1a.0
+ Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKG, 0 },
+ Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKH, 0 },
+ Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKB, 0 },
+ })
+ }
+}
+
diff --git a/src/mainboard/samsung/lumpy/acpi/superio.asl b/src/mainboard/samsung/lumpy/acpi/superio.asl
new file mode 100644
index 0000000..465fa54
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/superio.asl
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Values should match those defined in devicetree.cb */
+
+#define SIO_ENABLE_SPM1 // pnp 2e.1: Enable ACPI PM1 Block
+#define SIO_SPM1_IO0 0xb00 // pnp 2e.1: io 0x60
+
+#undef SIO_ENABLE_SEC1 // pnp 2e.2: Disable EC 1
+
+#undef SIO_ENABLE_SEC2 // pnp 2e.3: Disable EC 2
+
+#undef SIO_ENABLE_SSP1 // pnp 2e.4: Disable UART
+
+#define SIO_ENABLE_SKBC // pnp 2e.7: Enable Keyboard
+
+#undef SIO_ENABLE_SEC0 // pnp 2e.8: Already exported as EC
+
+#define SIO_ENABLE_SMBX // pnp 2e.9: Enable Mailbox
+#define SIO_SMBX_IO0 0xa00 // pnp 2e.9: io 0xa00
+
+#include "../../../../superio/smsc/mec1308/acpi/superio.asl"
diff --git a/src/mainboard/samsung/lumpy/acpi/thermal.asl b/src/mainboard/samsung/lumpy/acpi/thermal.asl
new file mode 100644
index 0000000..b8fa750
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/thermal.asl
@@ -0,0 +1,146 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Thermal Zone
+
+Scope (\_TZ)
+{
+ ThermalZone (THRM)
+ {
+ Name (_TC1, 0x02)
+ Name (_TC2, 0x05)
+
+ // Ignore critical temps for the first few reads
+ // at boot to prevent unexpected shutdown
+ Name (IRDC, 4)
+ Name (CRDC, 0)
+
+ // Thermal zone polling frequency: 10 seconds
+ Name (_TZP, 100)
+
+ // Thermal sampling period for passive cooling: 2 seconds
+ Name (_TSP, 20)
+
+ // Convert from Degrees C to 1/10 Kelvin for ACPI
+ Method (CTOK, 1) {
+ // 10th of Degrees C
+ Multiply (Arg0, 10, Local0)
+
+ // Convert to Kelvin
+ Add (Local0, 2732, Local0)
+
+ Return (Local0)
+ }
+
+ // Threshold for OS to shutdown
+ Method (_CRT, 0, Serialized)
+ {
+ Return (CTOK (\TCRT))
+ }
+
+ // Threshold for passive cooling
+ Method (_PSV, 0, Serialized)
+ {
+ Return (CTOK (\TPSV))
+ }
+
+ // Processors used for passive cooling
+ Method (_PSL, 0, Serialized)
+ {
+ Return (\PPKG ())
+ }
+
+ Method (_TMP, 0, Serialized)
+ {
+ // Get CPU Temperature from the Embedded Controller
+ Store (\_SB.PCI0.LPCB.EC0.CPUT, Local0)
+
+ // Re-read from EC if the temperature is very high to
+ // avoid OS shutdown if we got a bad reading.
+ If (LGreaterEqual (Local0, \TCRT)) {
+ Store (\_SB.PCI0.LPCB.EC0.CPUT, Local0)
+ If (LGreaterEqual (Local0, \TCRT)) {
+ // Check if this is an early read
+ If (LLess (CRDC, IRDC)) {
+ Store (0, Local0)
+ }
+ }
+ }
+
+ // Keep track of first few reads by the OS
+ If (LLess (CRDC, IRDC)) {
+ Increment (CRDC)
+ }
+
+ // Invalid reading, ensure fan is spinning
+ If (LGreaterEqual (Local0, 0x80)) {
+ Return (CTOK (\F4ON))
+ }
+
+ Return (CTOK (Local0))
+ }
+
+ Method (_AC0) {
+ If (LLessEqual (\FLVL, 0)) {
+ Return (CTOK (\F0OF))
+ } Else {
+ Return (CTOK (\F0ON))
+ }
+ }
+
+ Method (_AC1) {
+ If (LLessEqual (\FLVL, 1)) {
+ Return (CTOK (\F1OF))
+ } Else {
+ Return (CTOK (\F1ON))
+ }
+ }
+
+ Method (_AC2) {
+ If (LLessEqual (\FLVL, 2)) {
+ Return (CTOK (\F2OF))
+ } Else {
+ Return (CTOK (\F2ON))
+ }
+ }
+
+ Method (_AC3) {
+ If (LLessEqual (\FLVL, 3)) {
+ Return (CTOK (\F3OF))
+ } Else {
+ Return (CTOK (\F3ON))
+ }
+ }
+
+ Method (_AC4) {
+ If (LLessEqual (\FLVL, 4)) {
+ Return (CTOK (\F4OF))
+ } Else {
+ Return (CTOK (\F4ON))
+ }
+ }
+
+ Name (_AL0, Package () { \_SB.PCI0.LPCB.EC0.FAN0 })
+ Name (_AL1, Package () { \_SB.PCI0.LPCB.EC0.FAN1 })
+ Name (_AL2, Package () { \_SB.PCI0.LPCB.EC0.FAN2 })
+ Name (_AL3, Package () { \_SB.PCI0.LPCB.EC0.FAN3 })
+ Name (_AL4, Package () { \_SB.PCI0.LPCB.EC0.FAN4 })
+ }
+}
+
diff --git a/src/mainboard/samsung/lumpy/acpi/video.asl b/src/mainboard/samsung/lumpy/acpi/video.asl
new file mode 100644
index 0000000..3ececa9
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi/video.asl
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+// Brightness write
+Method (BRTW, 1, Serialized)
+{
+ // TODO
+}
+
+// Hot Key Display Switch
+Method (HKDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Lid Switch Display Switch
+Method (LSDS, 1, Serialized)
+{
+ // TODO
+}
+
+// Brightness Notification
+Method(BRTN,1,Serialized)
+{
+ // TODO (no displays defined yet)
+}
+
diff --git a/src/mainboard/samsung/lumpy/acpi_tables.c b/src/mainboard/samsung/lumpy/acpi_tables.c
new file mode 100644
index 0000000..a9eeb74
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/acpi_tables.c
@@ -0,0 +1,323 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/ioapic.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <ec/acpi/ec.h>
+#include <vendorcode/google/chromeos/gnvs.h>
+
+extern const unsigned char AmlCode[];
+#if CONFIG_HAVE_ACPI_SLIC
+unsigned long acpi_create_slic(unsigned long current);
+#endif
+
+#include "southbridge/intel/bd82x6x/nvs.h"
+#include "thermal.h"
+
+static global_nvs_t *gnvs_;
+
+static void acpi_update_thermal_table(global_nvs_t *gnvs)
+{
+ gnvs->f4of = FAN4_THRESHOLD_OFF;
+ gnvs->f4on = FAN4_THRESHOLD_ON;
+
+ gnvs->f3of = FAN3_THRESHOLD_OFF;
+ gnvs->f3on = FAN3_THRESHOLD_ON;
+
+ gnvs->f2of = FAN2_THRESHOLD_OFF;
+ gnvs->f2on = FAN2_THRESHOLD_ON;
+
+ gnvs->f1of = FAN1_THRESHOLD_OFF;
+ gnvs->f1on = FAN1_THRESHOLD_ON;
+
+ gnvs->f0of = FAN0_THRESHOLD_OFF;
+ gnvs->f0on = FAN0_THRESHOLD_ON;
+
+ gnvs->tcrt = CRITICAL_TEMPERATURE;
+ gnvs->tpsv = PASSIVE_TEMPERATURE;
+ gnvs->tmax = MAX_TEMPERATURE;
+ gnvs->flvl = 5;
+}
+
+static void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ gnvs_ = gnvs;
+ memset((void *)gnvs, 0, sizeof(*gnvs));
+ gnvs->apic = 1;
+ gnvs->mpen = 1; /* Enable Multi Processing */
+ gnvs->pcnt = dev_count_cpu();
+
+ /*
+ * Disable 3G in suspend by default.
+ * Provide option to enable for http://crosbug.com/p/7925
+ */
+ gnvs->s33g = 0;
+
+ /* Disable USB ports in S3 by default */
+ gnvs->s3u0 = 0;
+ gnvs->s3u1 = 0;
+
+ /* Disable USB ports in S5 by default */
+ gnvs->s5u0 = 0;
+ gnvs->s5u1 = 0;
+
+ /* CBMEM TOC */
+ gnvs->cmem = (u32)get_cbmem_toc();
+
+ /* IGD Displays */
+ gnvs->ndid = 3;
+ gnvs->did[0] = 0x80000100;
+ gnvs->did[1] = 0x80000240;
+ gnvs->did[2] = 0x80000410;
+ gnvs->did[3] = 0x80000410;
+ gnvs->did[4] = 0x00000005;
+
+ // TODO(reinauer) this could move elsewhere?
+ chromeos_init_vboot(&(gnvs->chromeos));
+
+ acpi_update_thermal_table(gnvs);
+
+ gnvs->chromeos.vbt2 = ec_read(0xcb) ? ACTIVE_ECFW_RW : ACTIVE_ECFW_RO;
+}
+
+static void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+{
+#define HPET_ADDR 0xfed00000ULL
+ acpi_header_t *header = &(hpet->header);
+ acpi_addr_t *addr = &(hpet->addr);
+
+ memset((void *) hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = HPET_ADDR & 0xffffffff;
+ addr->addrh = HPET_ADDR >> 32;
+
+ hpet->id = 0x8086a201; /* Intel */
+ hpet->number = 0x00;
+ hpet->min_tick = 0x0080;
+
+ header->checksum =
+ acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* Local APICs */
+ current = acpi_create_madt_lapics(current);
+
+ /* IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ 2, IO_APIC_ADDR, 0);
+
+ /* INT_SRC_OVR */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH);
+
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current,
+ const char *oem_table_id)
+{
+ generate_cpu_entries();
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+void smm_setup_structures(void *gnvs, void *tcg, void *smi1);
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ int i;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_xsdt_t *xsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_mcfg_t *mcfg;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+#if CONFIG_HAVE_ACPI_SLIC
+ acpi_header_t *slic;
+#endif
+ acpi_header_t *ssdt;
+ acpi_header_t *dsdt;
+
+ current = start;
+
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+ ALIGN_CURRENT;
+ xsdt = (acpi_xsdt_t *) current;
+ current += sizeof(acpi_xsdt_t);
+ ALIGN_CURRENT;
+
+ /* clear all table memory */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, xsdt);
+ acpi_write_rsdt(rsdt);
+ acpi_write_xsdt(xsdt);
+
+ printk(BIOS_DEBUG, "ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ ALIGN_CURRENT;
+ acpi_create_facs(facs);
+
+ printk(BIOS_DEBUG, "ACPI: * DSDT\n");
+ dsdt = (acpi_header_t *) current;
+ memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ memcpy(dsdt, &AmlCode, dsdt->length);
+
+ ALIGN_CURRENT;
+
+ printk(BIOS_DEBUG, "ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+ ALIGN_CURRENT;
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk(BIOS_DEBUG, "ACPI: * HPET\n");
+
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ ALIGN_CURRENT;
+ acpi_create_intel_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk(BIOS_DEBUG, "ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, madt);
+
+ printk(BIOS_DEBUG, "ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, mcfg);
+
+ /* Pack GNVS into the ACPI table area */
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBABE) {
+ printk(BIOS_DEBUG, "ACPI: Patching up global NVS in "
+ "DSDT at offset 0x%04x -> 0x%08lx\n", i, current);
+ *(u32*)(((u32)dsdt) + i) = current; // 0x92 bytes
+ break;
+ }
+ }
+
+ /* And fill it */
+ acpi_create_gnvs((global_nvs_t *)current);
+
+ /* And tell SMI about it */
+ smm_setup_structures((void *)current, NULL, NULL);
+
+ current += sizeof(global_nvs_t);
+ ALIGN_CURRENT;
+
+ /* We patched up the DSDT, so we need to recalculate the checksum */
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
+
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt,
+ dsdt->length);
+
+#if CONFIG_HAVE_ACPI_SLIC
+ printk(BIOS_DEBUG, "ACPI: * SLIC\n");
+ slic = (acpi_header_t *)current;
+ current += acpi_create_slic(current);
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp, slic);
+#endif
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+ acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR);
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+ ALIGN_CURRENT;
+
+ printk(BIOS_DEBUG, "current = %lx\n", current);
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
+}
+
+void acpi_get_vdat_info(void **vdat_addr, uint32_t *vdat_size)
+{
+ *vdat_addr = &gnvs_->chromeos.vdat;
+ *vdat_size = sizeof(gnvs_->chromeos.vdat);
+}
diff --git a/src/mainboard/samsung/lumpy/chip.h b/src/mainboard/samsung/lumpy/chip.h
new file mode 100644
index 0000000..831a973
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/chip.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2008 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+struct mainboard_config {};
diff --git a/src/mainboard/samsung/lumpy/chromeos.c b/src/mainboard/samsung/lumpy/chromeos.c
new file mode 100644
index 0000000..6d93470
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/chromeos.c
@@ -0,0 +1,135 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <arch/io.h>
+#ifdef __PRE_RAM__
+#include <arch/romcc_io.h>
+#else
+#include <device/device.h>
+#include <device/pci.h>
+#endif
+#include <northbridge/intel/sandybridge/sandybridge.h>
+#include <southbridge/intel/bd82x6x/pch.h>
+
+#define GPIO_SPI_WP 24
+#define GPIO_REC_MODE 42
+#define GPIO_DEV_MODE 17
+
+#define FLAG_SPI_WP 0
+#define FLAG_REC_MODE 1
+#define FLAG_DEV_MODE 2
+
+#ifndef __PRE_RAM__
+#include <boot/coreboot_tables.h>
+#include <arch/coreboot_tables.h>
+#include "ec.h"
+#include <ec/smsc/mec1308/ec.h>
+
+#define GPIO_COUNT 5
+#define ACTIVE_LOW 0
+#define ACTIVE_HIGH 1
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0));
+ u16 gen_pmcon_1 = pci_read_config32(dev, GEN_PMCON_1);
+ u8 lid = ec_read(0x83);
+
+ gpios->size = sizeof(*gpios) + (GPIO_COUNT * sizeof(struct lb_gpio));
+ gpios->count = GPIO_COUNT;
+
+ /* Write Protect: GPIO24 = KBC3_SPI_WP# */
+ gpios->gpios[0].port = GPIO_SPI_WP;
+ gpios->gpios[0].polarity = ACTIVE_HIGH;
+ gpios->gpios[0].value =
+ (pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 2)),
+ SATA_SP) >> FLAG_SPI_WP) & 1;
+ strncpy((char *)gpios->gpios[0].name,"write protect",
+ GPIO_MAX_NAME_LENGTH);
+
+ /* Recovery: GPIO42 = CHP3_REC_MODE# */
+ gpios->gpios[1].port = GPIO_REC_MODE;
+ gpios->gpios[1].polarity = ACTIVE_LOW;
+ gpios->gpios[1].value = !get_recovery_mode_switch();
+ strncpy((char *)gpios->gpios[1].name,"recovery", GPIO_MAX_NAME_LENGTH);
+
+ /* Developer: GPIO17 = KBC3_DVP_MODE */
+ gpios->gpios[2].port = GPIO_DEV_MODE;
+ gpios->gpios[2].polarity = ACTIVE_HIGH;
+ gpios->gpios[2].value = get_developer_mode_switch();
+ strncpy((char *)gpios->gpios[2].name,"developer", GPIO_MAX_NAME_LENGTH);
+
+ gpios->gpios[3].port = 100;
+ gpios->gpios[3].polarity = ACTIVE_HIGH;
+ gpios->gpios[3].value = lid & 1;
+ strncpy((char *)gpios->gpios[3].name,"lid", GPIO_MAX_NAME_LENGTH);
+
+ /* Power Button */
+ gpios->gpios[4].port = 101;
+ gpios->gpios[4].polarity = ACTIVE_LOW;
+ gpios->gpios[4].value = (gen_pmcon_1 >> 9) & 1;
+ strncpy((char *)gpios->gpios[4].name,"power", GPIO_MAX_NAME_LENGTH);
+}
+#endif
+
+int get_developer_mode_switch(void)
+{
+ device_t dev;
+#ifdef __PRE_RAM__
+ dev = PCI_DEV(0, 0x1f, 2);
+#else
+ dev = dev_find_slot(0, PCI_DEVFN(0x1f, 2));
+#endif
+ return (pci_read_config32(dev, SATA_SP) >> FLAG_DEV_MODE) & 1;
+}
+
+int get_recovery_mode_switch(void)
+{
+ device_t dev;
+#ifdef __PRE_RAM__
+ dev = PCI_DEV(0, 0x1f, 2);
+#else
+ dev = dev_find_slot(0, PCI_DEVFN(0x1f, 2));
+#endif
+ return (pci_read_config32(dev, SATA_SP) >> FLAG_REC_MODE) & 1;
+}
+
+#ifdef __PRE_RAM__
+void save_chromeos_gpios(void)
+{
+ u16 gpio_base = pci_read_config32(PCH_LPC_DEV, GPIO_BASE) & 0xfffe;
+ u32 gp_lvl2 = inl(gpio_base + GP_LVL2);
+ u32 gp_lvl = inl(gpio_base + GP_LVL);
+ u32 flags = 0;
+
+ /* Write Protect: GPIO24 = KBC3_SPI_WP#, active high */
+ if (gp_lvl & (1 << GPIO_SPI_WP))
+ flags |= (1 << FLAG_SPI_WP);
+ /* Recovery: GPIO42 = CHP3_REC_MODE#, active low */
+ if (!(gp_lvl2 & (1 << (GPIO_REC_MODE-32))))
+ flags |= (1 << FLAG_REC_MODE);
+ /* Developer: GPIO17 = KBC3_DVP_MODE, active high */
+ if (gp_lvl & (1 << GPIO_DEV_MODE))
+ flags |= (1 << FLAG_DEV_MODE);
+
+ pci_write_config32(PCI_DEV(0, 0x1f, 2), SATA_SP, flags);
+}
+#endif
diff --git a/src/mainboard/samsung/lumpy/cmos.layout b/src/mainboard/samsung/lumpy/cmos.layout
new file mode 100644
index 0000000..9552021
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/cmos.layout
@@ -0,0 +1,139 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# -----------------------------------------------------------------
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+# -----------------------------------------------------------------
+# Status Register A
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+# -----------------------------------------------------------------
+# Status Register B
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: cpu
+400 1 e 2 hyper_threading
+#401 7 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+#409 2 e 7 power_on_after_fail
+#411 5 r 0 unused
+
+# coreboot config options: bootloader
+#Used by ChromeOS:
+416 128 r 0 vbnv
+#544 440 r 0 unused
+
+# SandyBridge MRC Scrambler Seed values
+896 32 r 0 mrc_scrambler_seed
+928 32 r 0 mrc_scrambler_seed_s3
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+#1000 24 r 0 amd_reserved
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Disable
+7 1 Enable
+7 2 Keep
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 415 984
+
+
diff --git a/src/mainboard/samsung/lumpy/devicetree.cb b/src/mainboard/samsung/lumpy/devicetree.cb
new file mode 100644
index 0000000..36af1ca
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/devicetree.cb
@@ -0,0 +1,111 @@
+chip northbridge/intel/sandybridge
+
+ # Enable DisplayPort Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Enable Panel as LVDS and configure power delays
+ register "gpu_panel_port_select" = "0" # LVDS
+ register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms
+ register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms
+ register "gpu_panel_power_down_delay" = "150" # T3: 15ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms
+
+ device lapic_cluster 0 on
+ chip cpu/intel/socket_rPGA989
+ device lapic 0 on end
+ end
+ chip cpu/intel/model_206ax
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ # Coordinate with HW_ALL
+ register "pstate_coord_type" = "0xfe"
+
+ register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
+
+ register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
+ end
+ end
+
+ device pci_domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+
+ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "alt_gp_smi_en" = "0x0002"
+ register "gpi1_routing" = "1"
+ register "gpi7_routing" = "2"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x1"
+
+ # EC range is 0xa00-0xa3f
+ register "gen1_dec" = "0x003c0a01"
+ register "gen2_dec" = "0x003c0b01"
+
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 19.0 off end # Intel Gigabit Ethernet
+ device pci 1a.0 on end # USB2 EHCI #2
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1 (WLAN)
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 on end # PCIe Port #4 (LAN)
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1c.6 off end # PCIe Port #7
+ device pci 1c.7 off end # PCIe Port #8
+ device pci 1d.0 on end # USB2 EHCI #1
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/mec1308
+ device pnp 2e.1 on # PM1
+ io 0x60 = 0xb00
+ end
+ device pnp 2e.2 off end # EC1
+ device pnp 2e.3 off end # EC2
+ device pnp 2e.4 off end # UART
+ device pnp 2e.7 on # KBC
+ irq 0x70 = 1
+ end
+ device pnp 2e.8 on # EC0
+ io 0x60 = 0x62
+ end
+ device pnp 2e.9 on # MBX
+ io 0x60 = 0xa00
+ end
+ end
+ chip ec/smsc/mec1308
+ register "mailbox_port" = "0xa00"
+ device pnp ff.1 off end
+ end
+ end
+ device pci 1f.2 on end # SATA Controller 1
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 off end # SATA Controller 2
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/samsung/lumpy/dsdt.asl b/src/mainboard/samsung/lumpy/dsdt.asl
new file mode 100644
index 0000000..94adfda
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/dsdt.asl
@@ -0,0 +1,58 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, // DSDT revision: ACPI v2.0
+ "COREv4", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20110725 // OEM revision
+)
+{
+ // Some generic macros
+ #include "acpi/platform.asl"
+
+ // global NVS and variables
+ #include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
+
+ // General Purpose Events
+ //#include "acpi/gpe.asl"
+
+ // mainboard specific devices
+ #include "acpi/mainboard.asl"
+
+ #include <cpu/intel/model_206ax/acpi/cpu.asl>
+
+ #include "acpi/thermal.asl"
+
+ Scope (\_SB) {
+ Device (PCI0)
+ {
+ #include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
+ #include <southbridge/intel/bd82x6x/acpi/pch.asl>
+ }
+ }
+
+ #include "acpi/chromeos.asl"
+
+ /* Chipset specific sleep states */
+ #include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/samsung/lumpy/ec.c b/src/mainboard/samsung/lumpy/ec.c
new file mode 100644
index 0000000..40d8319
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/ec.c
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/acpi.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <types.h>
+#include <console/console.h>
+#include <ec/smsc/mec1308/ec.h>
+#include "ec.h"
+
+void lumpy_ec_init(void)
+{
+ printk(BIOS_DEBUG, "lumpy_ec_init\n");
+
+ if (acpi_slp_type == 3)
+ return;
+
+ /*
+ * Enable EC control of fan speed.
+ *
+ * This will be changed to OS control in ACPI EC _REG
+ * method when the OS is ready to control the fan.
+ */
+ ec_write(EC_FAN_SPEED, 0);
+
+ send_ec_command_data(EC_BATTERY_MODE, EC_BATTERY_MODE_NORMAL);
+ send_ec_command_data(EC_POWER_BUTTON_MODE, EC_POWER_BUTTON_MODE_OS);
+}
diff --git a/src/mainboard/samsung/lumpy/ec.h b/src/mainboard/samsung/lumpy/ec.h
new file mode 100644
index 0000000..3f90211
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/ec.h
@@ -0,0 +1,61 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LUMPY_EC_H
+#define LUMPY_EC_H
+
+#define EC_MAILBOX_PORT 0xa00 /* Mailbox IO address */
+#define EC_SMI_GPI 1 /* GPIO 1 is KBC3_EXTSMI# */
+
+/* Commands */
+#define EC_SMI_ENABLE 0x74
+#define EC_SMI_DISABLE 0x75
+#define EC_ACPI_ENABLE 0x76 /* Enter ACPI mode */
+#define EC_ACPI_DISABLE 0x77 /* Exit ACPI mode */
+
+/* Commands with data */
+#define EC_AUX_PORT_MODE 0x64 /* PS/2 control mode */
+#define EC_AUX_PORT_MODE_ENABLE 0x00
+#define EC_AUX_PORT_MODE_DISABLE 0x01
+#define EC_POWER_BUTTON_MODE 0x63
+#define EC_POWER_BUTTON_MODE_OS 0x00 /* OS control, 8 second override */
+#define EC_POWER_BUTTON_MODE_EC 0x01 /* EC control */
+#define EC_BACKLIGHT_OFF 0x67 /* Turn Backlight Off */
+#define EC_BACKLIGHT_ON 0x68 /* Turn Backlight On */
+#define EC_BATTERY_MODE 0x13
+#define EC_BATTERY_MODE_NORMAL 0x00 /* Normal mode */
+#define EC_BATTERY_MODE_EXTEND 0x01 /* Battery Life Cycle Extension */
+#define EC_GET_SMI_CAUSE 0x72 /* Get cause of SMI */
+
+/* EC RAM */
+#define EC_FAN_SPEED 0xca
+#define EC_FAN_SPEED_LEVEL_0 0x01 /* Level 0 is fastest */
+#define EC_FAN_SPEED_LEVEL_1 0x02 /* Level 1 is fast */
+#define EC_FAN_SPEED_LEVEL_2 0x04 /* Level 2 is slow */
+#define EC_FAN_SPEED_LEVEL_3 0x08 /* Level 3 is slowest */
+#define EC_FAN_SPEED_LEVEL_4 0x10 /* Level 4 is off */
+#define EC_FAN_SPEED_FLAG_OS 0x80 /* OS control of fan speed */
+
+/* EC SMI */
+#define EC_LID_CLOSE 0x9c /* Lid close event */
+#define EC_LID_OPEN 0x9d /* Lid open event */
+
+extern void lumpy_ec_init(void);
+
+#endif // LUMPY_EC_H
diff --git a/src/mainboard/samsung/lumpy/fadt.c b/src/mainboard/samsung/lumpy/fadt.c
new file mode 100644
index 0000000..6d78233
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/fadt.c
@@ -0,0 +1,156 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+#include <cpu/x86/smm.h>
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)),
+ 0x40) & 0xfffe;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 1;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 1;
+ fadt->preferred_pm_profile = PM_MOBILE;
+
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
+ fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = APM_CNT_PST_CONTROL;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = pmbase + 0x50;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x20;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 16;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = APM_CNT_CST_CONTROL;
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 87;
+ fadt->flush_size = 1024;
+ fadt->flush_stride = 16;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 0;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x00;
+ fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042;
+
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE |
+ ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pmbase + 0x20;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
diff --git a/src/mainboard/samsung/lumpy/gpio.h b/src/mainboard/samsung/lumpy/gpio.h
new file mode 100644
index 0000000..af5f3e2
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/gpio.h
@@ -0,0 +1,336 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LUMPY_GPIO_H
+#define LUMPY_GPIO_H
+
+#include "southbridge/intel/bd82x6x/gpio.h"
+
+/*
+ * GPIO SET 1 includes GPIO0 to GPIO31
+ */
+
+const struct pch_gpio_set1 pch_gpio_set1_mode = {
+ .gpio0 = GPIO_MODE_GPIO, /* CHP3_SERDBG */
+ .gpio1 = GPIO_MODE_GPIO, /* KBC3_EXTSMI# */
+ .gpio2 = GPIO_MODE_NATIVE, /* CHP3_ALSINT# (Light Sensor) */
+ .gpio3 = GPIO_MODE_NATIVE, /* CHP3_TP_INT# (Trackpad) */
+ .gpio4 = GPIO_MODE_NONE,
+ .gpio5 = GPIO_MODE_GPIO, /* SIM3_CARD_DET# */
+ .gpio6 = GPIO_MODE_NONE,
+ .gpio7 = GPIO_MODE_GPIO, /* KBC3_RUNSCI# */
+ .gpio8 = GPIO_MODE_GPIO, /* CHP3_INTELBT_OFF# */
+ .gpio9 = GPIO_MODE_NONE,
+ .gpio10 = GPIO_MODE_NONE,
+ .gpio11 = GPIO_MODE_GPIO, /* CHP3_TP_INT# (Trackpad wake) */
+ .gpio12 = GPIO_MODE_NONE,
+ .gpio13 = GPIO_MODE_GPIO, /* CHP3_DEBUG13 */
+ .gpio14 = GPIO_MODE_GPIO, /* KBC3_WAKESCI# */
+ .gpio15 = GPIO_MODE_NONE,
+ .gpio16 = GPIO_MODE_NONE,
+ .gpio17 = GPIO_MODE_GPIO, /* KBC3_DVP_MODE */
+ .gpio18 = GPIO_MODE_NATIVE, /* MIN3_CLKREQ1# */
+ .gpio19 = GPIO_MODE_NONE,
+ .gpio20 = GPIO_MODE_NONE,
+ .gpio21 = GPIO_MODE_GPIO, /* LCD3_SIZE */
+ .gpio22 = GPIO_MODE_GPIO, /* CHP3_BIOS_CRISIS# */
+ .gpio23 = GPIO_MODE_NONE,
+ .gpio24 = GPIO_MODE_GPIO, /* KBC3_SPI_WP# */
+ .gpio25 = GPIO_MODE_NONE,
+ .gpio26 = GPIO_MODE_NATIVE, /* LAN3_CLKREQ# */
+ .gpio27 = GPIO_MODE_NONE,
+ .gpio28 = GPIO_MODE_NONE,
+ .gpio29 = GPIO_MODE_NONE,
+ .gpio30 = GPIO_MODE_NATIVE, /* CHP3_SUSWARN# */
+ .gpio31 = GPIO_MODE_NATIVE, /* KBC3_AC_PRESENT */
+};
+
+const struct pch_gpio_set1 pch_gpio_set1_direction = {
+ .gpio0 = GPIO_DIR_OUTPUT,
+ .gpio1 = GPIO_DIR_INPUT,
+ .gpio2 = GPIO_DIR_INPUT,
+ .gpio3 = GPIO_DIR_INPUT,
+ .gpio4 = GPIO_DIR_INPUT,
+ .gpio5 = GPIO_DIR_INPUT,
+ .gpio6 = GPIO_DIR_INPUT,
+ .gpio7 = GPIO_DIR_INPUT,
+ .gpio8 = GPIO_DIR_OUTPUT,
+ .gpio9 = GPIO_DIR_INPUT,
+ .gpio10 = GPIO_DIR_INPUT,
+ .gpio11 = GPIO_DIR_INPUT,
+ .gpio12 = GPIO_DIR_INPUT,
+ .gpio13 = GPIO_DIR_INPUT,
+ .gpio14 = GPIO_DIR_INPUT,
+ .gpio15 = GPIO_DIR_INPUT,
+ .gpio16 = GPIO_DIR_INPUT,
+ .gpio17 = GPIO_DIR_INPUT,
+ .gpio18 = GPIO_DIR_INPUT,
+ .gpio19 = GPIO_DIR_INPUT,
+ .gpio20 = GPIO_DIR_INPUT,
+ .gpio21 = GPIO_DIR_INPUT,
+ .gpio22 = GPIO_DIR_OUTPUT,
+ .gpio23 = GPIO_DIR_INPUT,
+ .gpio24 = GPIO_DIR_INPUT,
+ .gpio25 = GPIO_DIR_INPUT,
+ .gpio26 = GPIO_DIR_INPUT,
+ .gpio27 = GPIO_DIR_INPUT,
+ .gpio28 = GPIO_DIR_INPUT,
+ .gpio29 = GPIO_DIR_INPUT,
+ .gpio30 = GPIO_DIR_INPUT,
+ .gpio31 = GPIO_DIR_INPUT,
+};
+
+const struct pch_gpio_set1 pch_gpio_set1_level = {
+ .gpio0 = GPIO_LEVEL_LOW,
+ .gpio1 = GPIO_LEVEL_LOW,
+ .gpio2 = GPIO_LEVEL_LOW,
+ .gpio3 = GPIO_LEVEL_LOW,
+ .gpio4 = GPIO_LEVEL_LOW,
+ .gpio5 = GPIO_LEVEL_LOW,
+ .gpio6 = GPIO_LEVEL_LOW,
+ .gpio7 = GPIO_LEVEL_LOW,
+ .gpio8 = GPIO_LEVEL_LOW,
+ .gpio9 = GPIO_LEVEL_LOW,
+ .gpio10 = GPIO_LEVEL_LOW,
+ .gpio11 = GPIO_LEVEL_LOW,
+ .gpio12 = GPIO_LEVEL_LOW,
+ .gpio13 = GPIO_LEVEL_LOW,
+ .gpio14 = GPIO_LEVEL_LOW,
+ .gpio15 = GPIO_LEVEL_LOW,
+ .gpio16 = GPIO_LEVEL_LOW,
+ .gpio17 = GPIO_LEVEL_LOW,
+ .gpio18 = GPIO_LEVEL_LOW,
+ .gpio19 = GPIO_LEVEL_LOW,
+ .gpio20 = GPIO_LEVEL_LOW,
+ .gpio21 = GPIO_LEVEL_LOW,
+ .gpio22 = GPIO_LEVEL_HIGH,
+ .gpio23 = GPIO_LEVEL_LOW,
+ .gpio24 = GPIO_LEVEL_LOW,
+ .gpio25 = GPIO_LEVEL_LOW,
+ .gpio26 = GPIO_LEVEL_LOW,
+ .gpio27 = GPIO_LEVEL_LOW,
+ .gpio28 = GPIO_LEVEL_LOW,
+ .gpio29 = GPIO_LEVEL_LOW,
+ .gpio30 = GPIO_LEVEL_LOW,
+ .gpio31 = GPIO_LEVEL_LOW,
+};
+
+const struct pch_gpio_set1 pch_gpio_set1_invert = {
+ .gpio0 = GPIO_NO_INVERT,
+ .gpio1 = GPIO_INVERT,
+ .gpio2 = GPIO_INVERT,
+ .gpio3 = GPIO_INVERT,
+ .gpio4 = GPIO_NO_INVERT,
+ .gpio5 = GPIO_INVERT,
+ .gpio6 = GPIO_NO_INVERT,
+ .gpio7 = GPIO_INVERT,
+ .gpio8 = GPIO_NO_INVERT,
+ .gpio9 = GPIO_NO_INVERT,
+ .gpio10 = GPIO_NO_INVERT,
+ .gpio11 = GPIO_INVERT,
+ .gpio12 = GPIO_NO_INVERT,
+ .gpio13 = GPIO_NO_INVERT,
+ .gpio14 = GPIO_INVERT,
+ .gpio15 = GPIO_NO_INVERT,
+};
+
+/*
+ * GPIO SET 2 includes GPIO32 to GPIO63
+ */
+
+const struct pch_gpio_set2 pch_gpio_set2_mode = {
+ .gpio32 = GPIO_MODE_NATIVE, /* PCI3_CLKRUN# */
+ .gpio33 = GPIO_MODE_GPIO, /* Onboard Memory Capacity */
+ .gpio34 = GPIO_MODE_NONE,
+ .gpio35 = GPIO_MODE_GPIO, /* CHP3_WLAN_OFF# */
+ .gpio36 = GPIO_MODE_NONE,
+ .gpio37 = GPIO_MODE_GPIO, /* CHP3_FDI_OVRVLTG */
+ .gpio38 = GPIO_MODE_GPIO, /* CHP3_3G_OFF# */
+ .gpio39 = GPIO_MODE_NONE,
+ .gpio40 = GPIO_MODE_NATIVE, /* USB3_OC1# */
+ .gpio41 = GPIO_MODE_GPIO, /* Onboard Memory Revision */
+ .gpio42 = GPIO_MODE_GPIO, /* CHP3_REC_MODE# */
+ .gpio43 = GPIO_MODE_GPIO, /* CHP3_HSPA_PWRON# */
+ .gpio44 = GPIO_MODE_GPIO, /* CHP3_SMRT_CHG0_CTL2# */
+ .gpio45 = GPIO_MODE_GPIO, /* CHP3_SMRT_CHG0_CTL3# */
+ .gpio46 = GPIO_MODE_GPIO, /* CHP3_SMRT_CHG1_CTL2# */
+ .gpio47 = GPIO_MODE_GPIO, /* CHP3_CHG_ENABLE0 */
+ .gpio48 = GPIO_MODE_GPIO, /* CHP3_BT_OFF# */
+ .gpio49 = GPIO_MODE_GPIO, /* Onboard Memory Vendor */
+ .gpio50 = GPIO_MODE_NONE,
+ .gpio51 = GPIO_MODE_NONE,
+ .gpio52 = GPIO_MODE_NONE,
+ .gpio53 = GPIO_MODE_NATIVE,
+ .gpio54 = GPIO_MODE_NONE,
+ .gpio55 = GPIO_MODE_GPIO, /* STP_A16OVR */
+ .gpio56 = GPIO_MODE_GPIO, /* CHP3_CHG_ENABLE1 */
+ .gpio57 = GPIO_MODE_GPIO, /* CHP3_DEBUG10 */
+ .gpio58 = GPIO_MODE_NATIVE, /* SIO3_THERM_SMCLK# */
+ .gpio59 = GPIO_MODE_NATIVE, /* USB3_OC0# */
+ .gpio60 = GPIO_MODE_GPIO, /* CHP3_DRAMRST_GATE */
+ .gpio61 = GPIO_MODE_NATIVE, /* CHP3_SUSSTAT# */
+ .gpio62 = GPIO_MODE_NATIVE, /* CHP3_SUSCLK */
+ .gpio63 = GPIO_MODE_NATIVE, /* CHP3_SLPS5# */
+};
+
+const struct pch_gpio_set2 pch_gpio_set2_direction = {
+ .gpio32 = GPIO_DIR_INPUT,
+ .gpio33 = GPIO_DIR_INPUT,
+ .gpio34 = GPIO_DIR_INPUT,
+ .gpio35 = GPIO_DIR_OUTPUT,
+ .gpio36 = GPIO_DIR_INPUT,
+ .gpio37 = GPIO_DIR_INPUT,
+ .gpio38 = GPIO_DIR_OUTPUT,
+ .gpio39 = GPIO_DIR_INPUT,
+ .gpio40 = GPIO_DIR_INPUT,
+ .gpio41 = GPIO_DIR_INPUT,
+ .gpio42 = GPIO_DIR_INPUT,
+ .gpio43 = GPIO_DIR_OUTPUT,
+ .gpio44 = GPIO_DIR_OUTPUT,
+ .gpio45 = GPIO_DIR_OUTPUT,
+ .gpio46 = GPIO_DIR_OUTPUT,
+ .gpio47 = GPIO_DIR_OUTPUT,
+ .gpio48 = GPIO_DIR_OUTPUT,
+ .gpio49 = GPIO_DIR_INPUT,
+ .gpio50 = GPIO_DIR_INPUT,
+ .gpio51 = GPIO_DIR_INPUT,
+ .gpio52 = GPIO_DIR_INPUT,
+ .gpio53 = GPIO_DIR_INPUT,
+ .gpio54 = GPIO_DIR_INPUT,
+ .gpio55 = GPIO_DIR_INPUT,
+ .gpio56 = GPIO_DIR_OUTPUT,
+ .gpio57 = GPIO_DIR_OUTPUT,
+ .gpio58 = GPIO_DIR_INPUT,
+ .gpio59 = GPIO_DIR_INPUT,
+ .gpio60 = GPIO_DIR_OUTPUT,
+ .gpio61 = GPIO_DIR_INPUT,
+ .gpio62 = GPIO_DIR_INPUT,
+ .gpio63 = GPIO_DIR_INPUT,
+};
+
+const struct pch_gpio_set2 pch_gpio_set2_level = {
+ .gpio32 = GPIO_LEVEL_LOW,
+ .gpio33 = GPIO_LEVEL_LOW,
+ .gpio34 = GPIO_LEVEL_LOW,
+ .gpio35 = GPIO_LEVEL_HIGH, /* Enable WLAN */
+ .gpio36 = GPIO_LEVEL_LOW,
+ .gpio37 = GPIO_LEVEL_LOW,
+ .gpio38 = GPIO_LEVEL_HIGH, /* Enable 3G */
+ .gpio39 = GPIO_LEVEL_LOW,
+ .gpio40 = GPIO_LEVEL_LOW,
+ .gpio41 = GPIO_LEVEL_LOW,
+ .gpio42 = GPIO_LEVEL_LOW,
+ .gpio43 = GPIO_LEVEL_LOW,
+ .gpio44 = GPIO_LEVEL_HIGH, /* CTL2=1 for USB0 SDP */
+ .gpio45 = GPIO_LEVEL_LOW, /* CTL3=0 for USB0 SDP */
+ .gpio46 = GPIO_LEVEL_HIGH, /* CTL2=1 for USB1 SDP */
+ .gpio47 = GPIO_LEVEL_HIGH, /* Enable USB0 */
+ .gpio48 = GPIO_LEVEL_LOW, /* Disable Bluetooth */
+ .gpio49 = GPIO_LEVEL_LOW,
+ .gpio50 = GPIO_LEVEL_LOW,
+ .gpio51 = GPIO_LEVEL_LOW,
+ .gpio52 = GPIO_LEVEL_LOW,
+ .gpio53 = GPIO_LEVEL_LOW,
+ .gpio54 = GPIO_LEVEL_LOW,
+ .gpio55 = GPIO_LEVEL_LOW,
+ .gpio56 = GPIO_LEVEL_HIGH, /* Enable USB1 */
+ .gpio57 = GPIO_LEVEL_LOW,
+ .gpio58 = GPIO_LEVEL_LOW,
+ .gpio59 = GPIO_LEVEL_LOW,
+ .gpio60 = GPIO_LEVEL_HIGH,
+ .gpio61 = GPIO_LEVEL_LOW,
+ .gpio62 = GPIO_LEVEL_LOW,
+ .gpio63 = GPIO_LEVEL_LOW,
+};
+
+/*
+ * GPIO SET 3 includes GPIO64 to GPIO75
+ */
+
+const struct pch_gpio_set3 pch_gpio_set3_mode = {
+ .gpio64 = GPIO_MODE_NONE,
+ .gpio65 = GPIO_MODE_NONE,
+ .gpio66 = GPIO_MODE_NONE,
+ .gpio67 = GPIO_MODE_NONE,
+ .gpio68 = GPIO_MODE_NONE,
+ .gpio69 = GPIO_MODE_GPIO, /* PEX3_WWAN_DET# */
+ .gpio70 = GPIO_MODE_GPIO, /* CHP3_WLAN_RST# */
+ .gpio71 = GPIO_MODE_GPIO, /* CHP3_WLAN_PWRON */
+ .gpio72 = GPIO_MODE_NATIVE, /* BATLOW# (pullup) */
+ .gpio73 = GPIO_MODE_GPIO, /* CHP3_SMRT_CHG1_CTL3# */
+ .gpio74 = GPIO_MODE_NONE,
+ .gpio75 = GPIO_MODE_NATIVE, /* SIO3_THERM_SMDATA# */
+};
+
+const struct pch_gpio_set3 pch_gpio_set3_direction = {
+ .gpio64 = GPIO_DIR_INPUT,
+ .gpio65 = GPIO_DIR_INPUT,
+ .gpio66 = GPIO_DIR_INPUT,
+ .gpio67 = GPIO_DIR_INPUT,
+ .gpio68 = GPIO_DIR_INPUT,
+ .gpio69 = GPIO_DIR_INPUT,
+ .gpio70 = GPIO_DIR_OUTPUT,
+ .gpio71 = GPIO_DIR_OUTPUT,
+ .gpio72 = GPIO_DIR_INPUT,
+ .gpio73 = GPIO_DIR_OUTPUT,
+ .gpio74 = GPIO_DIR_INPUT,
+ .gpio75 = GPIO_DIR_INPUT,
+};
+
+const struct pch_gpio_set3 pch_gpio_set3_level = {
+ .gpio64 = GPIO_LEVEL_LOW,
+ .gpio65 = GPIO_LEVEL_LOW,
+ .gpio66 = GPIO_LEVEL_LOW,
+ .gpio67 = GPIO_LEVEL_LOW,
+ .gpio68 = GPIO_LEVEL_LOW,
+ .gpio69 = GPIO_LEVEL_LOW,
+ .gpio70 = GPIO_LEVEL_HIGH, /* WLAN out of reset */
+ .gpio71 = GPIO_LEVEL_HIGH, /* WLAN power on */
+ .gpio72 = GPIO_LEVEL_LOW,
+ .gpio73 = GPIO_LEVEL_LOW, /* USB1 CTL3=0 for SDP */
+ .gpio74 = GPIO_LEVEL_LOW,
+ .gpio75 = GPIO_LEVEL_LOW,
+};
+
+const struct pch_gpio_set2 pch_gpio_set2_reset = {
+ .gpio38 = GPIO_RESET_RSMRST,
+ .gpio43 = GPIO_RESET_RSMRST,
+};
+
+const struct pch_gpio_map lumpy_gpio_map = {
+ .set1 = {
+ .mode = &pch_gpio_set1_mode,
+ .direction = &pch_gpio_set1_direction,
+ .level = &pch_gpio_set1_level,
+ .invert = &pch_gpio_set1_invert,
+ },
+ .set2 = {
+ .mode = &pch_gpio_set2_mode,
+ .direction = &pch_gpio_set2_direction,
+ .level = &pch_gpio_set2_level,
+ .reset = &pch_gpio_set2_reset,
+ },
+ .set3 = {
+ .mode = &pch_gpio_set3_mode,
+ .direction = &pch_gpio_set3_direction,
+ .level = &pch_gpio_set3_level,
+ },
+};
+
+#endif
diff --git a/src/mainboard/samsung/lumpy/hda_verb.h b/src/mainboard/samsung/lumpy/hda_verb.h
new file mode 100644
index 0000000..732f0aa
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/hda_verb.h
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+static const u32 mainboard_cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10134210, // Codec Vendor / Device ID: Realtek ALC262
+ 0x144db082, // Subsystem ID
+ 0x00000007, // Number of jacks
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x144dc0c2 */
+ 0x00172082,
+ 0x001721b0,
+ 0x0017224d,
+ 0x00172314,
+
+ 0x00170500,
+
+ /* Pin Widget Verb Table */
+
+ /* Pin Complex (NID 0x05) */
+ 0x00571cf0,
+ 0x00571d10,
+ 0x00571e21,
+ 0x00571f02,
+
+ /* Pin Complex (NID 0x06) */
+ 0x00671cf0,
+ 0x00671d00,
+ 0x00671e17,
+ 0x00671f90,
+
+ /* Pin Complex (NID 0x07) */
+ 0x00771cf0,
+ 0x00771d10,
+ 0x00771ea1,
+ 0x00771f02,
+
+ /* Pin Complex (NID 0x08) */
+ 0x00871c37,
+ 0x00871d00,
+ 0x00871ea7,
+ 0x00871f77,
+
+ /* Pin Complex (NID 0x09) */
+ 0x00971c3e,
+ 0x00971d00,
+ 0x00971ea6,
+ 0x00971fb7,
+
+ /* Pin Complex (NID 0x0a) */
+ 0x00a71cf0,
+ 0x00a71d10,
+ 0x00a71e45,
+ 0x00a71f43
+};
diff --git a/src/mainboard/samsung/lumpy/mainboard.c b/src/mainboard/samsung/lumpy/mainboard.c
new file mode 100644
index 0000000..c5db0d3
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/mainboard.c
@@ -0,0 +1,332 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#include <x86emu/x86emu.h>
+#endif
+#include <pc80/mc146818rtc.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/interrupt.h>
+#include <arch/coreboot_tables.h>
+#include <ec/smsc/mec1308/ec.h>
+#include "hda_verb.h"
+#include "chip.h"
+#include "ec.h"
+#include "onboard.h"
+#include <southbridge/intel/bd82x6x/pch.h>
+#include <smbios.h>
+
+void mainboard_suspend_resume(void)
+{
+ /* Call SMM finalize() handlers before resume */
+ outb(0xcb, 0xb2);
+
+ /* Enable EC ACPI mode for the OS before resume */
+ send_ec_command(EC_SMI_DISABLE);
+ send_ec_command(EC_ACPI_ENABLE);
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ return add_northbridge_resources(mem);
+}
+
+#if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+static int int15_handler(struct eregs *regs)
+{
+ int res=-1;
+
+ printk(BIOS_DEBUG, "%s: INT15 function %04x!\n",
+ __func__, regs->eax & 0xffff);
+
+ switch(regs->eax & 0xffff) {
+ case 0x5f34:
+ /*
+ * Set Panel Fitting Hook:
+ * bit 2 = Graphics Stretching
+ * bit 1 = Text Stretching
+ * bit 0 = Centering (do not set with bit1 or bit2)
+ * 0 = video bios default
+ */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffffff00;
+ regs->ecx |= 0x00;
+ res = 0;
+ break;
+ case 0x5f35:
+ /*
+ * Boot Display Device Hook:
+ * bit 0 = CRT
+ * bit 1 = TV
+ * bit 2 = EFP *
+ * bit 3 = LFP
+ * bit 4 = CRT2
+ * bit 5 = TV2
+ * bit 6 = EFP2 *
+ * bit 7 = LFP2
+ */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffff0000;
+ regs->ecx |= 0x0000;
+ res = 0;
+ break;
+ case 0x5f51:
+ /*
+ * Hook to select active LFP configuration:
+ * 00h = No LVDS, VBIOS does not enable LVDS
+ * 01h = Int-LVDS, LFP driven by integrated LVDS decoder
+ * 02h = SVDO-LVDS, LFP driven by SVDO decoder
+ * 03h = eDP, LFP Driven by Int-DisplayPort encoder
+ */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffff0000;
+ regs->ecx |= 0x0001;
+ res = 0;
+ break;
+ case 0x5f70:
+ switch ((regs->ecx >> 8) & 0xff) {
+ case 0:
+ /* Get Mux */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffff0000;
+ regs->ecx |= 0x0000;
+ res = 0;
+ break;
+ case 1:
+ /* Set Mux */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffff0000;
+ regs->ecx |= 0x0000;
+ res = 0;
+ break;
+ case 2:
+ /* Get SG/Non-SG mode */
+ regs->eax &= 0xffff0000;
+ regs->eax |= 0x005f;
+ regs->ecx &= 0xffff0000;
+ regs->ecx |= 0x0000;
+ res = 0;
+ break;
+ default:
+ /* Interrupt was not handled */
+ printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n",
+ ((regs->ecx >> 8) & 0xff));
+ return 0;
+ }
+ break;
+
+ default:
+ printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n",
+ regs->eax & 0xffff);
+ break;
+ }
+ return res;
+}
+#endif
+
+#if defined(CONFIG_PCI_OPTION_ROM_RUN_YABEL) && CONFIG_PCI_OPTION_ROM_RUN_YABEL
+static int int15_handler(void)
+{
+ printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
+ __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
+
+ switch (M.x86.R_AX) {
+ case 0x5f34:
+ /*
+ * Set Panel Fitting Hook:
+ * bit 2 = Graphics Stretching
+ * bit 1 = Text Stretching
+ * bit 0 = Centering (do not set with bit1 or bit2)
+ * 0 = video bios default
+ */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CL = 0x00;
+ break;
+ case 0x5f35:
+ /*
+ * Boot Display Device Hook:
+ * bit 0 = CRT
+ * bit 1 = TV
+ * bit 2 = EFP *
+ * bit 3 = LFP
+ * bit 4 = CRT2
+ * bit 5 = TV2
+ * bit 6 = EFP2 *
+ * bit 7 = LFP2
+ */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CX = 0x0000;
+ break;
+ case 0x5f51:
+ /*
+ * Hook to select active LFP configuration:
+ * 00h = No LVDS, VBIOS does not enable LVDS
+ * 01h = Int-LVDS, LFP driven by integrated LVDS decoder
+ * 02h = SVDO-LVDS, LFP driven by SVDO decoder
+ * 03h = eDP, LFP Driven by Int-DisplayPort encoder
+ */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CX = 1;
+ break;
+ case 0x5f70:
+ switch (M.x86.R_CH) {
+ case 0:
+ /* Get Mux */
+ printk(BIOS_DEBUG, "Get Mux\n");
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CL = 0;
+ break;
+ case 1:
+ printk(BIOS_DEBUG, "Set Mux\n");
+ /* Set Mux */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CX = 0;
+ break;
+ case 2:
+ printk(BIOS_DEBUG, "Get SG Mode\n");
+ /* Get SG/Non-SG mode */
+ M.x86.R_AX = 0x005f;
+ M.x86.R_CX = 0;
+ break;
+ default:
+ /* Interrupt was not handled */
+ printk(BIOS_DEBUG, "Unknown INT15 5f70 function: 0x%02x\n",
+ M.x86.R_CH);
+ return 0;
+ }
+ break;
+ default:
+ /* Interrupt was not handled */
+ printk(BIOS_DEBUG, "Unknown INT15 function: 0x%04x\n",
+ M.x86.R_AX);
+ return 0;
+ }
+
+ /* Interrupt handled */
+ return 1;
+}
+#endif
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+static void int15_install(void)
+{
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+ typedef int (* yabel_handleIntFunc)(void);
+ extern yabel_handleIntFunc yabel_intFuncArray[256];
+ yabel_intFuncArray[0x15] = int15_handler;
+#endif
+#ifdef CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+ mainboard_interrupt_handlers(0x15, &int15_handler);
+#endif
+}
+#endif
+
+/* Audio Setup */
+
+extern const u32 * cim_verb_data;
+extern u32 cim_verb_data_size;
+
+static void verb_setup(void)
+{
+ cim_verb_data = mainboard_cim_verb_data;
+ cim_verb_data_size = sizeof(mainboard_cim_verb_data);
+}
+
+static void mainboard_init(device_t dev)
+{
+ /* Initialize the Embedded Controller */
+ lumpy_ec_init();
+}
+
+// mainboard_enable is executed as first thing after
+// enumerate_buses().
+
+static void mainboard_enable(device_t dev)
+{
+ dev->ops->init = mainboard_init;
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL || CONFIG_PCI_OPTION_ROM_RUN_REALMODE
+ /* Install custom int15 handler for VGA OPROM */
+ int15_install();
+#endif
+ verb_setup();
+}
+
+static int lumpy_smbios_type41_irq(int *handle, unsigned long *current,
+ const char *name, u8 irq, u8 addr)
+{
+ struct smbios_type41 *t = (struct smbios_type41 *)*current;
+ int len = sizeof(struct smbios_type41);
+
+ memset(t, 0, sizeof(struct smbios_type41));
+ t->type = SMBIOS_ONBOARD_DEVICES_EXTENDED_INFORMATION;
+ t->handle = *handle;
+ t->length = len - 2;
+ t->reference_designation = smbios_add_string(t->eos, name);
+ t->device_type = SMBIOS_DEVICE_TYPE_OTHER;
+ t->device_status = 1;
+ t->device_type_instance = irq;
+ t->segment_group_number = 0;
+ t->bus_number = addr;
+ t->function_number = 0;
+ t->device_number = 0;
+
+ len = t->length + smbios_string_table_len(t->eos);
+ *current += len;
+ *handle += 1;
+ return len;
+}
+
+
+static int lumpy_onboard_smbios_data(device_t dev, int *handle,
+ unsigned long *current)
+{
+ int len = 0;
+
+ len += lumpy_smbios_type41_irq(handle, current,
+ LUMPY_LIGHTSENSOR_NAME,
+ LUMPY_LIGHTSENSOR_IRQ,
+ LUMPY_LIGHTSENSOR_I2C_ADDR);
+
+ len += lumpy_smbios_type41_irq(handle, current,
+ LUMPY_TRACKPAD_NAME,
+ LUMPY_TRACKPAD_IRQ,
+ LUMPY_TRACKPAD_I2C_ADDR);
+
+ return len;
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("Samsung Lumpy ChromeBook")
+ .enable_dev = mainboard_enable,
+ .get_smbios_data = lumpy_onboard_smbios_data,
+};
+
diff --git a/src/mainboard/samsung/lumpy/mainboard_smi.c b/src/mainboard/samsung/lumpy/mainboard_smi.c
new file mode 100644
index 0000000..2d396b0
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/mainboard_smi.c
@@ -0,0 +1,129 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include <southbridge/intel/bd82x6x/nvs.h>
+#include <southbridge/intel/bd82x6x/pch.h>
+#include <southbridge/intel/bd82x6x/me.h>
+#include <northbridge/intel/sandybridge/sandybridge.h>
+#include <cpu/intel/model_206ax/model_206ax.h>
+#include <ec/smsc/mec1308/ec.h>
+#include "ec.h"
+
+/* The southbridge SMI handler checks whether gnvs has a
+ * valid pointer before calling the trap handler
+ */
+extern global_nvs_t *gnvs;
+
+int mainboard_io_trap_handler(int smif)
+{
+ switch (smif) {
+ case 0x99:
+ printk(BIOS_DEBUG, "Sample\n");
+ gnvs->smif = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ /* On success, the IO Trap Handler returns 0
+ * On failure, the IO Trap Handler returns a value != 0
+ *
+ * For now, we force the return value to 0 and log all traps to
+ * see what's going on.
+ */
+ //gnvs->smif = 0;
+ return 1;
+}
+
+static u8 mainboard_smi_ec(void)
+{
+ u8 cmd;
+ u32 pm1_cnt;
+ extern u16 pmbase; /* Set in southbridge SMI handler */
+
+ cmd = read_ec_command_byte(EC_GET_SMI_CAUSE);
+
+ switch (cmd) {
+ case EC_LID_CLOSE:
+ printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n");
+
+ /* Go to S5 */
+ pm1_cnt = inl(pmbase + PM1_CNT);
+ pm1_cnt |= (0xf << 10);
+ outl(pm1_cnt, pmbase + PM1_CNT);
+ break;
+ }
+
+ return cmd;
+}
+
+void mainboard_smi_gpi(u16 gpi_sts)
+{
+ if (gpi_sts & (1 << EC_SMI_GPI)) {
+ /* Process all pending EC requests */
+ ec_set_ports(EC_MAILBOX_PORT, EC_MAILBOX_PORT+1);
+ while (mainboard_smi_ec() != 0xff);
+
+ /* The EC may keep asserting SMI# for some
+ * period unless we kick it here.
+ */
+ send_ec_command(EC_SMI_DISABLE);
+ send_ec_command(EC_SMI_ENABLE);
+ }
+}
+
+#define APMC_FINALIZE 0xcb
+
+static int mainboard_finalized = 0;
+
+int mainboard_smi_apmc(u8 apmc)
+{
+ ec_set_ports(EC_MAILBOX_PORT, EC_MAILBOX_PORT+1);
+
+ switch (apmc) {
+ case 0xe1: /* ACPI ENABLE */
+ send_ec_command(EC_SMI_DISABLE);
+ send_ec_command(EC_ACPI_ENABLE);
+ break;
+
+ case 0x1e: /* ACPI DISABLE */
+ send_ec_command(EC_SMI_ENABLE);
+ send_ec_command(EC_ACPI_DISABLE);
+ break;
+
+ case APMC_FINALIZE:
+ if (mainboard_finalized) {
+ printk(BIOS_DEBUG, "SMI#: Already finalized\n");
+ return 0;
+ }
+
+ intel_me_finalize_smm();
+ intel_pch_finalize_smm();
+ intel_sandybridge_finalize_smm();
+ intel_model_206ax_finalize_smm();
+
+ mainboard_finalized = 1;
+ break;
+ }
+ return 0;
+}
diff --git a/src/mainboard/samsung/lumpy/onboard.h b/src/mainboard/samsung/lumpy/onboard.h
new file mode 100644
index 0000000..6bdf057
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/onboard.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LUMPY_ONBOARD_H
+#define LUMPY_ONBOARD_H
+
+#include <arch/smp/mpspec.h>
+
+#define LUMPY_LIGHTSENSOR_NAME "lightsensor"
+#define LUMPY_LIGHTSENSOR_I2C_ADDR 0x44
+#define LUMPY_LIGHTSENSOR_IRQ 20
+
+#define LUMPY_TRACKPAD_NAME "trackpad"
+#define LUMPY_TRACKPAD_I2C_ADDR 0x67
+#define LUMPY_TRACKPAD_IRQ 21
+
+#endif
diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c
new file mode 100644
index 0000000..7aa4746
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/romstage.c
@@ -0,0 +1,387 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <lib.h>
+#include <timestamp.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <pc80/mc146818rtc.h>
+#include <cbfs.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include "northbridge/intel/sandybridge/sandybridge.h"
+#include "northbridge/intel/sandybridge/raminit.h"
+#include "southbridge/intel/bd82x6x/pch.h"
+#include "southbridge/intel/bd82x6x/gpio.h"
+#include <arch/cpu.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/msr.h>
+#include "option_table.h"
+#include "gpio.h"
+#if CONFIG_CONSOLE_SERIAL8250
+#include "superio/smsc/lpc47n207/lpc47n207.h"
+#include "superio/smsc/lpc47n207/early_serial.c"
+#endif
+#if CONFIG_CHROMEOS
+#include <vendorcode/google/chromeos/chromeos.h>
+#endif
+
+static void pch_enable_lpc(void)
+{
+ /* Set COM1/COM2 decode range */
+ pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
+
+#if CONFIG_CONSOLE_SERIAL8250
+ /* Enable SuperIO + EC + KBC + COM1 + lpc47n207 config*/
+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
+ KBC_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN);
+
+ /* map full 256 bytes at 0x1600 to the LPC bus */
+ pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0xfc1601);
+
+ try_enabling_LPC47N207_uart();
+#else
+ /* Enable SuperIO + EC + KBC */
+ pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
+ KBC_LPC_EN);
+#endif
+}
+
+static void rcba_config(void)
+{
+ u32 reg32;
+
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP WLAN INTA -> PIRQB
+ * D28IP_P4IP ETH0 INTB -> PIRQC (MSI)
+ * D29IP_E1P EHCI1 INTA -> PIRQD
+ * D26IP_E2P EHCI2 INTA -> PIRQB
+ * D31IP_SIP SATA INTA -> PIRQA (MSI)
+ * D31IP_SMIP SMBUS INTC -> PIRQH
+ * D31IP_TTIP THRT INTB -> PIRQG
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ *
+ * LIGHTSENSOR -> PIRQE (Edge Triggered)
+ * TRACKPAD -> PIRQF (Edge Triggered)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA32(D31IP) = (INTB << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTC << D31IP_SMIP) | (INTA << D31IP_SIP);
+ RCBA32(D30IP) = (NOINT << D30IP_PIP);
+ RCBA32(D29IP) = (INTA << D29IP_E1P);
+ RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP);
+ RCBA32(D27IP) = (INTA << D27IP_ZIP);
+ RCBA32(D26IP) = (INTA << D26IP_E2P);
+ RCBA32(D25IP) = (NOINT << D25IP_LIP);
+ RCBA32(D22IP) = (NOINT << D22IP_MEI1IP);
+
+ /* Device interrupt route registers */
+ DIR_ROUTE(D31IR, PIRQA, PIRQG, PIRQH, PIRQB);
+ DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQG, PIRQH);
+ DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE);
+ DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB);
+ DIR_ROUTE(D26IR, PIRQB, PIRQC, PIRQD, PIRQA);
+ DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD);
+ DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
+
+ /* Enable IOAPIC (generic) */
+ RCBA16(OIC) = 0x0100;
+ /* PCH BWG says to read back the IOAPIC enable register */
+ (void) RCBA16(OIC);
+
+ /* Enable upper 128bytes of CMOS (generic) */
+ RCBA32(RC) = (1 << 2);
+
+ /* Disable unused devices (board specific) */
+ reg32 = RCBA32(FD);
+ reg32 |= PCH_DISABLE_ALWAYS;
+ RCBA32(FD) = reg32;
+}
+
+static void early_pch_init(void)
+{
+ u8 reg8;
+
+ // reset rtc power status
+ reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4);
+ reg8 &= ~(1 << 2);
+ pci_write_config8(PCH_LPC_DEV, 0xa4, reg8);
+}
+
+void main(unsigned long bist)
+{
+ int boot_mode = 0;
+ int cbmem_was_initted;
+ u32 pm1_cnt;
+ u16 pm1_sts;
+
+#if CONFIG_COLLECT_TIMESTAMPS
+ tsc_t start_romstage_time;
+ tsc_t before_dram_time;
+ tsc_t after_dram_time;
+ tsc_t base_time = {
+ .lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc),
+ .hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0)
+ };
+#endif
+
+ struct pei_data pei_data = {
+ .mchbar = 0xfed10000,
+ .dmibar = 0xfed18000,
+ .epbar = 0xfed19000,
+ .pciexbar = 0xf0000000,
+ .smbusbar = 0x400,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = 0xfed00000,
+ .rcba = 0xfed1c000,
+ .pmbase = 0x500,
+ .gpiobase = 0x480,
+ .thermalbase = 0xfed08000,
+ .system_type = 0, // 0 Mobile, 1 Desktop/Server
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0x50, 0x00,0xf0,0x00 },
+ .ts_addresses = { 0x30, 0x00, 0x00, 0x00 },
+ .ec_present = 1,
+ // 0 = leave channel enabled
+ // 1 = disable dimm 0 on channel
+ // 2 = disable dimm 1 on channel
+ // 3 = disable dimm 0+1 on channel
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .usb_port_config = {
+ { 1, 0, 0x0080 }, /* P0: Port 0 (OC0) */
+ { 1, 1, 0x0080 }, /* P1: Port 1 (OC1) */
+ { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */
+ { 1, 0, 0x0040 }, /* P3: MMC (no OC) */
+ { 0, 0, 0x0000 }, /* P4: Empty */
+ { 0, 0, 0x0000 }, /* P5: Empty */
+ { 0, 0, 0x0000 }, /* P6: Empty */
+ { 0, 0, 0x0000 }, /* P7: Empty */
+ { 1, 4, 0x0040 }, /* P8: MINIPCIE2 (no OC) */
+ { 0, 4, 0x0000 }, /* P9: Empty */
+ { 0, 4, 0x0000 }, /* P10: Empty */
+ { 1, 4, 0x0040 }, /* P11: Camera (no OC) */
+ { 0, 4, 0x0000 }, /* P12: Empty */
+ { 0, 4, 0x0000 }, /* P13: Empty */
+ },
+ .spd_data = {
+ }
+ };
+
+ typedef const uint8_t spd_blob[256];
+ struct cbfs_file *spd_file;
+ spd_blob *spd_data;
+
+
+#if CONFIG_COLLECT_TIMESTAMPS
+ start_romstage_time = rdtsc();
+#endif
+
+ if (bist == 0)
+ enable_lapic();
+
+ pch_enable_lpc();
+
+ /* Enable GPIOs */
+ pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1);
+ pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+ setup_pch_gpios(&lumpy_gpio_map);
+
+ console_init();
+
+#if CONFIG_CHROMEOS
+ save_chromeos_gpios();
+#endif
+
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
+ if (MCHBAR16(SSKPD) == 0xCAFE) {
+ printk(BIOS_DEBUG, "soft reset detected\n");
+ boot_mode = 1;
+
+ /* System is not happy after keyboard reset... */
+ printk(BIOS_DEBUG, "Issuing CF9 warm reset\n");
+ outb(0x6, 0xcf9);
+ hlt();
+ }
+
+ /* Perform some early chipset initialization required
+ * before RAM initialization can work
+ */
+ sandybridge_early_initialization(SANDYBRIDGE_MOBILE);
+ printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n");
+
+ /* Check PM1_STS[15] to see if we are waking from Sx */
+ pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
+
+ /* Read PM1_CNT[12:10] to determine which Sx state */
+ pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
+
+ if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ printk(BIOS_DEBUG, "Resume from S3 detected.\n");
+ boot_mode = 2;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
+#else
+ printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
+#endif
+ }
+
+ post_code(0x38);
+ /* Enable SPD ROMs and DDR-III DRAM */
+ enable_smbus();
+
+ /* Prepare USB controller early in S3 resume */
+ if (boot_mode == 2)
+ enable_usb_bar();
+
+ u32 gp_lvl2 = inl(DEFAULT_GPIOBASE + 0x38);
+ u8 gpio33, gpio41, gpio49;
+ gpio33 = (gp_lvl2 >> (33-32)) & 1;
+ gpio41 = (gp_lvl2 >> (41-32)) & 1;
+ gpio49 = (gp_lvl2 >> (49-32)) & 1;
+ printk(BIOS_DEBUG, "Memory Straps:\n");
+ printk(BIOS_DEBUG, " - memory capacity %dGB\n",
+ gpio33 ? 2 : 1);
+ printk(BIOS_DEBUG, " - die revision %d\n",
+ gpio41 ? 2 : 1);
+ printk(BIOS_DEBUG, " - vendor %s\n",
+ gpio49 ? "Samsung" : "Other");
+
+ int spd_index = 0;
+
+ switch ((gpio49 << 2) | (gpio41 << 1) | gpio33) {
+ case 0: // Other 1G Rev 1
+ spd_index = 0;
+ break;
+ case 2: // Other 1G Rev 2
+ spd_index = 1;
+ break;
+ case 1: // Other 2G Rev 1
+ case 3: // Other 2G Rev 2
+ spd_index = 2;
+ break;
+ case 4: // Samsung 1G Rev 1
+ spd_index = 3;
+ break;
+ case 6: // Samsung 1G Rev 2
+ spd_index = 4;
+ break;
+ case 5: // Samsung 2G Rev 1
+ case 7: // Samsung 2G Rev 2
+ spd_index = 5;
+ break;
+ }
+
+ spd_file = cbfs_find("spd.bin");
+ if (!spd_file)
+ die("SPD data not found.");
+ if (spd_file->len < (spd_index + 1) * 256)
+ die("Missing SPD data.");
+ spd_data = (spd_blob *)CBFS_SUBHEADER(spd_file);
+ // leave onboard dimm address at f0, and copy spd data there.
+ memcpy(pei_data.spd_data[0], spd_data[spd_index], 256);
+
+ post_code(0x39);
+ pei_data.boot_mode = boot_mode;
+#if CONFIG_COLLECT_TIMESTAMPS
+ before_dram_time = rdtsc();
+#endif
+ sdram_initialize(&pei_data);
+
+#if CONFIG_COLLECT_TIMESTAMPS
+ after_dram_time = rdtsc();
+#endif
+ post_code(0x3a);
+ /* Perform some initialization that must run before stage2 */
+ early_pch_init();
+ post_code(0x3b);
+
+ rcba_config();
+ post_code(0x3c);
+
+ /* Initialize the internal PCIe links before we go into stage2 */
+ sandybridge_late_initialization();
+
+ post_code(0x3e);
+ quick_ram_check();
+
+ MCHBAR16(SSKPD) = 0xCAFE;
+
+#if CONFIG_EARLY_CBMEM_INIT
+ cbmem_was_initted = !cbmem_initialize();
+#else
+ cbmem_was_initted = cbmem_reinit((uint64_t) (get_top_of_ram()
+ - HIGH_MEMORY_SIZE));
+#endif
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* If there is no high memory area, we didn't boot before, so
+ * this is not a resume. In that case we just create the cbmem toc.
+ */
+
+ *(u32 *)CBMEM_BOOT_MODE = 0;
+ *(u32 *)CBMEM_RESUME_BACKUP = 0;
+
+ if ((boot_mode == 2) && cbmem_was_initted) {
+ void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+ if (resume_backup_memory) {
+ *(u32 *)CBMEM_BOOT_MODE = boot_mode;
+ *(u32 *)CBMEM_RESUME_BACKUP = (u32)resume_backup_memory;
+ }
+ /* Magic for S3 resume */
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+ } else if (boot_mode == 2) {
+ /* Failed S3 resume, reset to come up cleanly */
+ outb(0x6, 0xcf9);
+ hlt();
+ } else {
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe);
+ }
+#endif
+ post_code(0x3f);
+#if CONFIG_CHROMEOS
+ init_chromeos(boot_mode);
+#endif
+#if CONFIG_COLLECT_TIMESTAMPS
+ timestamp_init(base_time);
+ timestamp_add(TS_START_ROMSTAGE, start_romstage_time );
+ timestamp_add(TS_BEFORE_INITRAM, before_dram_time );
+ timestamp_add(TS_AFTER_INITRAM, after_dram_time );
+ timestamp_add_now(TS_END_ROMSTAGE);
+#endif
+#if CONFIG_CONSOLE_CBMEM
+ /* Keep this the last thing this function does. */
+ cbmemc_reinit();
+#endif
+}
diff --git a/src/mainboard/samsung/lumpy/spd.hex b/src/mainboard/samsung/lumpy/spd.hex
new file mode 100644
index 0000000..8690886
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/spd.hex
@@ -0,0 +1,96 @@
+0000000: 92 10 0b 03 02 11 00 01 03 52 01 08 0c 00 3e 00 .........R....>.
+0000010: 69 78 69 30 69 11 20 89 70 03 3c 3c 00 f0 83 01 ixi0i. .p.<<....
+0000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000030: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 21 00 ..............!.
+0000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000070: 00 00 00 00 00 80 ce 01 00 00 00 00 00 00 d3 0d ................
+0000080: 4d 34 37 31 42 32 38 37 33 46 48 53 2d 43 48 39 M471B2873FHS-CH9
+0000090: 20 20 00 00 80 ce 00 00 00 00 00 00 00 00 00 00 ..............
+00000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000100: 92 10 0b 03 02 11 00 01 03 52 01 08 0f 00 1e 00 .........R......
+0000110: 69 78 69 3c 69 11 2c 95 70 03 3c 3c 01 2c 83 01 ixi<i.,.p.<<.,..
+0000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000130: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 21 00 ..............!.
+0000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000170: 00 00 00 00 00 80 ce 02 10 31 81 1d 77 ce 91 a4 .........1..w...
+0000180: 4d 34 37 31 42 32 38 37 33 46 48 53 2d 43 46 38 M471B2873FHS-CF8
+0000190: 20 20 00 00 80 ce 00 00 00 53 47 30 44 35 31 31 .......SG0D511
+00001a0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00001b0: 01 a0 04 38 20 06 57 31 00 00 00 00 00 00 00 00 ...8 .W1........
+00001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000200: 92 10 0b 03 03 19 00 01 03 52 01 08 0c 00 7e 00 .........R....~.
+0000210: 69 78 69 30 69 11 20 89 00 05 3c 3c 00 f0 83 81 ixi0i. ...<<....
+0000220: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000230: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 41 00 ..............A.
+0000240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000270: 00 00 00 00 00 02 fe 00 00 00 00 00 00 00 29 2b ..............)+
+0000280: 45 42 4a 32 30 55 46 38 42 44 55 30 2d 44 4a 2d EBJ20UF8BDU0-DJ-
+0000290: 46 20 30 20 02 fe 00 00 00 00 00 00 00 00 00 00 F 0 ............
+00002a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00002b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00002c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00002d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00002e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00002f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000300: 92 11 0b 03 02 11 00 01 03 11 01 08 0c 00 3e 00 ..............>.
+0000310: 69 78 69 30 69 11 20 89 70 03 3c 3c 00 f0 83 01 ixi0i. .p.<<....
+0000320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000330: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 41 00 ..............A.
+0000340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000370: 00 00 00 00 00 80 ce 01 00 00 00 00 00 00 cf 74 ...............t
+0000380: 4d 34 37 31 42 32 38 37 33 47 42 30 2d 43 48 39 M471B2873GB0-CH9
+0000390: 20 20 00 00 80 ce 00 00 00 00 00 00 00 00 00 00 ..............
+00003a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00003b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00003c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00003d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00003e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00003f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000400: 92 11 0b 03 02 11 00 01 03 11 01 08 0f 00 1e 00 ................
+0000410: 69 78 69 3c 69 11 2c 95 70 03 3c 3c 01 2c 83 01 ixi<i.,.p.<<.,..
+0000420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000430: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 41 00 ..............A.
+0000440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000470: 00 00 00 00 00 80 ce 01 00 00 00 00 00 00 8d dd ................
+0000480: 4d 34 37 31 42 32 38 37 33 47 42 30 2d 43 46 38 M471B2873GB0-CF8
+0000490: 20 20 00 00 80 ce 00 00 00 00 00 00 00 00 00 00 ..............
+00004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00004b0: 01 a0 04 38 20 06 57 31 00 00 00 00 00 00 00 00 ...8 .W1........
+00004c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00004d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00004e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00004f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000500: 92 10 0b 03 03 19 00 01 03 52 01 08 0c 00 3e 00 .........R....>.
+0000510: 69 78 69 30 69 11 20 89 00 05 3c 3c 00 f0 83 01 ixi0i. ...<<....
+0000520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000530: 00 00 00 00 00 00 00 00 00 00 00 00 0f 11 21 00 ..............!.
+0000540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+0000570: 00 00 00 00 00 80 ce 01 00 00 00 00 00 00 4c db ..............L.
+0000580: 4d 34 37 31 42 35 37 37 33 43 48 53 2d 43 48 39 M471B5773CHS-CH9
+0000590: 20 20 00 00 80 ce 00 00 00 53 30 58 44 30 30 30 .......S0XD000
+00005a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00005b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00005c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00005d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00005e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+00005f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
diff --git a/src/mainboard/samsung/lumpy/thermal.h b/src/mainboard/samsung/lumpy/thermal.h
new file mode 100644
index 0000000..82c413c
--- /dev/null
+++ b/src/mainboard/samsung/lumpy/thermal.h
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef LUMPY_THERMAL_H
+#define LUMPY_THERMAL_H
+
+/* Fan is OFF */
+#define FAN4_THRESHOLD_OFF 0
+#define FAN4_THRESHOLD_ON 0
+
+/* Fan is at LOW speed */
+#define FAN3_THRESHOLD_OFF 44
+#define FAN3_THRESHOLD_ON 48
+
+/* Fan is at MEDIUM speed */
+#define FAN2_THRESHOLD_OFF 48
+#define FAN2_THRESHOLD_ON 54
+
+/* Fan is at HIGH speed */
+#define FAN1_THRESHOLD_OFF 60
+#define FAN1_THRESHOLD_ON 64
+
+/* Fan is at FULL speed */
+#define FAN0_THRESHOLD_OFF 66
+#define FAN0_THRESHOLD_ON 78
+
+/* Temperature which OS will shutdown at */
+#define CRITICAL_TEMPERATURE 100
+
+/* Temperature which OS will throttle CPU */
+#define PASSIVE_TEMPERATURE 90
+
+/* Tj_max value for calculating PECI CPU temperature */
+#define MAX_TEMPERATURE 100
+
+#endif