Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Add Asrock 939a785gmh motherboard. The ACPI needs more cleanup, could be done when cleaning
the Mahagony board. The SidePort mode does not work because AMD hardcoded memory type in rs780_gfx.c
The UMA is enabled instead. The board boots, network and int VGA works, IDE too.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
diff --git a/src/mainboard/asrock/939a785gmh/mainboard.c b/src/mainboard/asrock/939a785gmh/mainboard.c
new file mode 100644
index 0000000..44752f1
--- /dev/null
+++ b/src/mainboard/asrock/939a785gmh/mainboard.c
@@ -0,0 +1,174 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/coreboot_tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/coreboot_tables.h>
+#include <../southbridge/amd/sb700/sb700.h>
+#include "chip.h"
+
+#define SMBUS_IO_BASE 0x6000
+
+extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
+ uint64_t start, uint64_t size);
+
+uint64_t uma_memory_base, uma_memory_size;
+
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+
+/*
+ * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
+ * pull it up before training the slot.
+ ***/
+void set_pcie_dereset()
+{
+ u16 word;
+ device_t sm_dev;
+ /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ word = pci_read_config16(sm_dev, 0xA8);
+ word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */
+ word &= ~((1 << 8) | (1 << 10));
+ pci_write_config16(sm_dev, 0xA8, word);
+}
+
+void set_pcie_reset()
+{
+ u16 word;
+ device_t sm_dev;
+ /* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ word = pci_read_config16(sm_dev, 0xA8);
+ word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */
+ word &= ~((1 << 8) | (1 << 10));
+ pci_write_config16(sm_dev, 0xA8, word);
+}
+
+#if 0 /* not tested yet */
+/********************************************************
+* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
+* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
+* get the cable type, 40 pin or 80 pin?
+********************************************************/
+static void get_ide_dma66(void)
+{
+ u8 byte;
+ /*u32 sm_dev, ide_dev; */
+ device_t sm_dev, ide_dev;
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ byte = pci_read_config8(sm_dev, 0xA9);
+ byte |= (1 << 5); /* Set Gpio9 as input */
+ pci_write_config8(sm_dev, 0xA9, byte);
+
+ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+ byte = pci_read_config8(ide_dev, 0x56);
+ byte &= ~(7 << 0);
+ if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
+ byte |= 2 << 0; /* mode 2 */
+ else
+ byte |= 5 << 0; /* mode 5 */
+ pci_write_config8(ide_dev, 0x56, byte);
+}
+#endif /* get_ide_dma66 */
+
+/*************************************************
+* enable the dedicated function in mahogany board.
+* This function called early than rs780_enable.
+*************************************************/
+static void mahogany_enable(device_t dev)
+{
+ /* Leave it for future. */
+ /* struct mainboard_config *mainboard =
+ (struct mainboard_config *)dev->chip_info;*/
+
+ printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
+
+#if (CONFIG_GFXUMA == 1)
+ msr_t msr, msr2;
+
+ /* TOP_MEM: the top of DRAM below 4G */
+ msr = rdmsr(TOP_MEM);
+ printk
+ (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
+
+ /* TOP_MEM2: the top of DRAM above 4G */
+ msr2 = rdmsr(TOP_MEM2);
+ printk
+ (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
+
+ /* refer to UMA Size Consideration in 780 BDG. */
+ switch (msr.lo) {
+ case 0x10000000: /* 256M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ case 0x20000000: /* 512M system memory */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ break;
+
+ default: /* 1GB and above system memory */
+ uma_memory_size = 0x10000000; /* 256M recommended UMA */
+ break;
+ }
+
+ uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
+ printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
+ __func__, uma_memory_size, uma_memory_base);
+
+ /* TODO: TOP_MEM2 */
+#else
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ uma_memory_base = 0x38000000; /* 1GB system memory supposed */
+#endif
+
+ set_pcie_dereset();
+ /* get_ide_dma66(); */
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ /* UMA is removed from system memory in the northbridge code, but
+ * in some circumstances we want the memory mentioned as reserved.
+ */
+#if (CONFIG_GFXUMA == 1)
+ printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
+ uma_memory_base, uma_memory_size);
+ lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
+ uma_memory_size);
+#endif
+ return 0;
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("AMD MAHOGANY Mainboard")
+ .enable_dev = mahogany_enable,
+};