util/kconfig: Uprev to Linux 5.19's kconfig
Only minor changes in kconfig this time that shouldn't
affect us.
TEST=`util/abuild/abuild -C` output (build.h and build.conf) remains
the same
Change-Id: Icc83c929dd1ea2d98e1a789560ce26886ded1f12
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
diff --git a/util/kconfig/gconf-cfg.sh b/util/kconfig/gconf-cfg.sh
index 480ecd8..cbd90c2 100755
--- a/util/kconfig/gconf-cfg.sh
+++ b/util/kconfig/gconf-cfg.sh
@@ -3,14 +3,14 @@
PKG="gtk+-2.0 gmodule-2.0 libglade-2.0"
-if [ -z "$(command -v pkg-config)" ]; then
+if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
echo >&2 "*"
- echo >&2 "* 'make gconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "* 'make gconfig' requires '${HOSTPKG_CONFIG}'. Please install it."
echo >&2 "*"
exit 1
fi
-if ! pkg-config --exists $PKG; then
+if ! ${HOSTPKG_CONFIG} --exists $PKG; then
echo >&2 "*"
echo >&2 "* Unable to find the GTK+ installation. Please make sure that"
echo >&2 "* the GTK+ 2.0 development package is correctly installed."
@@ -19,12 +19,12 @@
exit 1
fi
-if ! pkg-config --atleast-version=2.0.0 gtk+-2.0; then
+if ! ${HOSTPKG_CONFIG} --atleast-version=2.0.0 gtk+-2.0; then
echo >&2 "*"
echo >&2 "* GTK+ is present but version >= 2.0.0 is required."
echo >&2 "*"
exit 1
fi
-echo cflags=\"$(pkg-config --cflags $PKG)\"
-echo libs=\"$(pkg-config --libs $PKG)\"
+echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
+echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
diff --git a/util/kconfig/mconf-cfg.sh b/util/kconfig/mconf-cfg.sh
index 2047e62..7351bf5 100755
--- a/util/kconfig/mconf-cfg.sh
+++ b/util/kconfig/mconf-cfg.sh
@@ -4,16 +4,16 @@
PKG="ncursesw"
PKG2="ncurses"
-if [ -n "$(command -v pkg-config)" ]; then
- if pkg-config --exists $PKG; then
- echo cflags=\"$(pkg-config --cflags $PKG)\"
- echo libs=\"$(pkg-config --libs $PKG)\"
+if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
+ if ${HOSTPKG_CONFIG} --exists $PKG; then
+ echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
+ echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
exit 0
fi
- if pkg-config --exists $PKG2; then
- echo cflags=\"$(pkg-config --cflags $PKG2)\"
- echo libs=\"$(pkg-config --libs $PKG2)\"
+ if ${HOSTPKG_CONFIG} --exists $PKG2; then
+ echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
+ echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
exit 0
fi
fi
@@ -52,7 +52,7 @@
echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"
echo >&2 "* depending on your distribution)."
echo >&2 "*"
-echo >&2 "* You may also need to install pkg-config to find the"
+echo >&2 "* You may also need to install ${HOSTPKG_CONFIG} to find the"
echo >&2 "* ncurses installed in a non-default location."
echo >&2 "*"
exit 1
diff --git a/util/kconfig/nconf-cfg.sh b/util/kconfig/nconf-cfg.sh
index c212255..3a10bac 100755
--- a/util/kconfig/nconf-cfg.sh
+++ b/util/kconfig/nconf-cfg.sh
@@ -4,16 +4,16 @@
PKG="ncursesw menuw panelw"
PKG2="ncurses menu panel"
-if [ -n "$(command -v pkg-config)" ]; then
- if pkg-config --exists $PKG; then
- echo cflags=\"$(pkg-config --cflags $PKG)\"
- echo libs=\"$(pkg-config --libs $PKG)\"
+if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then
+ if ${HOSTPKG_CONFIG} --exists $PKG; then
+ echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\"
+ echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
exit 0
fi
- if pkg-config --exists $PKG2; then
- echo cflags=\"$(pkg-config --cflags $PKG2)\"
- echo libs=\"$(pkg-config --libs $PKG2)\"
+ if ${HOSTPKG_CONFIG} --exists $PKG2; then
+ echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\"
+ echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\"
exit 0
fi
fi
@@ -44,7 +44,7 @@
echo >&2 "* Install ncurses (ncurses-devel or libncurses-dev"
echo >&2 "* depending on your distribution)."
echo >&2 "*"
-echo >&2 "* You may also need to install pkg-config to find the"
+echo >&2 "* You may also need to install ${HOSTPKG_CONFIG} to find the"
echo >&2 "* ncurses installed in a non-default location."
echo >&2 "*"
exit 1
diff --git a/util/kconfig/nconf.c b/util/kconfig/nconf.c
index 20ddf99..d3afdbe 100644
--- a/util/kconfig/nconf.c
+++ b/util/kconfig/nconf.c
@@ -54,8 +54,8 @@
"\n"
"Menu navigation keys\n"
"----------------------------------------------------------------------\n"
-"Linewise up <Up>\n"
-"Linewise down <Down>\n"
+"Linewise up <Up> <k>\n"
+"Linewise down <Down> <j>\n"
"Pagewise up <Page Up>\n"
"Pagewise down <Page Down>\n"
"First entry <Home>\n"
@@ -1118,9 +1118,11 @@
break;
switch (res) {
case KEY_DOWN:
+ case 'j':
menu_driver(curses_menu, REQ_DOWN_ITEM);
break;
case KEY_UP:
+ case 'k':
menu_driver(curses_menu, REQ_UP_ITEM);
break;
case KEY_NPAGE:
@@ -1300,9 +1302,11 @@
break;
switch (res) {
case KEY_DOWN:
+ case 'j':
menu_driver(curses_menu, REQ_DOWN_ITEM);
break;
case KEY_UP:
+ case 'k':
menu_driver(curses_menu, REQ_UP_ITEM);
break;
case KEY_NPAGE:
diff --git a/util/kconfig/qconf-cfg.sh b/util/kconfig/qconf-cfg.sh
index fa564cd..9b695e5 100755
--- a/util/kconfig/qconf-cfg.sh
+++ b/util/kconfig/qconf-cfg.sh
@@ -3,22 +3,22 @@
PKG="Qt5Core Qt5Gui Qt5Widgets"
-if [ -z "$(command -v pkg-config)" ]; then
+if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then
echo >&2 "*"
- echo >&2 "* 'make xconfig' requires 'pkg-config'. Please install it."
+ echo >&2 "* 'make xconfig' requires '${HOSTPKG_CONFIG}'. Please install it."
echo >&2 "*"
exit 1
fi
-if pkg-config --exists $PKG; then
- echo cflags=\"-std=c++11 -fPIC $(pkg-config --cflags $PKG)\"
- echo libs=\"$(pkg-config --libs $PKG)\"
- echo moc=\"$(pkg-config --variable=host_bins Qt5Core)/moc\"
+if ${HOSTPKG_CONFIG} --exists $PKG; then
+ echo cflags=\"-std=c++11 -fPIC $(${HOSTPKG_CONFIG} --cflags $PKG)\"
+ echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\"
+ echo moc=\"$(${HOSTPKG_CONFIG} --variable=host_bins Qt5Core)/moc\"
exit 0
fi
echo >&2 "*"
-echo >&2 "* Could not find Qt5 via pkg-config."
+echo >&2 "* Could not find Qt5 via ${HOSTPKG_CONFIG}."
echo >&2 "* Please install Qt5 and make sure it's in PKG_CONFIG_PATH"
echo >&2 "*"
exit 1