| /* Copyright (c) 2010 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| /* TPM error codes. |
| * |
| * Copy-pasted and lightly edited from TCG TPM Main Part 2 TPM Structures |
| * Version 1.2 Level 2 Revision 103 26 October 2006 Draft. |
| */ |
| |
| #ifndef TPM_ERROR_MESSAGES_H |
| #define TPM_ERROR_MESSAGES_H |
| |
| #define TPM_E_BASE 0x0 |
| #define TPM_E_NON_FATAL 0x800 |
| |
| typedef struct tpm_error_info { |
| const char* name; |
| uint32_t code; |
| const char* description; |
| } tpm_error_info; |
| |
| tpm_error_info tpm_error_table[] = { |
| { "TPM_AUTHFAIL", TPM_E_BASE + 1, |
| "Authentication failed" }, |
| { "TPM_BADINDEX", TPM_E_BASE + 2, |
| "The index to a PCR, DIR or other register is incorrect" }, |
| { "TPM_BAD_PARAMETER", TPM_E_BASE + 3, |
| "One or more parameter is bad" }, |
| { "TPM_AUDITFAILURE", TPM_E_BASE + 4, |
| "An operation completed successfully\n\ |
| but the auditing of that operation failed" }, |
| { "TPM_CLEAR_DISABLED", TPM_E_BASE + 5, |
| "The clear disable flag is set and all clear operations now require\n\ |
| physical access" }, |
| { "TPM_DEACTIVATED", TPM_E_BASE + 6, |
| "The TPM is deactivated" }, |
| { "TPM_DISABLED", TPM_E_BASE + 7, |
| "The TPM is disabled" }, |
| { "TPM_DISABLED_CMD", TPM_E_BASE + 8, |
| "The target command has been disabled" }, |
| { "TPM_FAIL", TPM_E_BASE + 9, |
| "The operation failed" }, |
| { "TPM_BAD_ORDINAL", TPM_E_BASE + 10, |
| "The ordinal was unknown or inconsistent" }, |
| { "TPM_INSTALL_DISABLED", TPM_E_BASE + 11, |
| "The ability to install an owner is disabled" }, |
| { "TPM_INVALID_KEYHANDLE", TPM_E_BASE + 12, |
| "The key handle can not be interpreted" }, |
| { "TPM_KEYNOTFOUND", TPM_E_BASE + 13, |
| "The key handle points to an invalid key" }, |
| { "TPM_INAPPROPRIATE_ENC", TPM_E_BASE + 14, |
| "Unacceptable encryption scheme" }, |
| { "TPM_MIGRATEFAIL", TPM_E_BASE + 15, |
| "Migration authorization failed" }, |
| { "TPM_INVALID_PCR_INFO", TPM_E_BASE + 16, |
| "PCR information could not be interpreted" }, |
| { "TPM_NOSPACE", TPM_E_BASE + 17, |
| "No room to load key" }, |
| { "TPM_NOSRK", TPM_E_BASE + 18, |
| "There is no SRK set" }, |
| { "TPM_NOTSEALED_BLOB", TPM_E_BASE + 19, |
| "An encrypted blob is invalid or was not created by this TPM" }, |
| { "TPM_OWNER_SET", TPM_E_BASE + 20, |
| "There is already an Owner" }, |
| { "TPM_RESOURCES", TPM_E_BASE + 21, |
| "The TPM has insufficient internal resources to perform the requested action" }, |
| { "TPM_SHORTRANDOM", TPM_E_BASE + 22, |
| "A random string was too short" }, |
| { "TPM_SIZE", TPM_E_BASE + 23, |
| "The TPM does not have the space to perform the operation" }, |
| { "TPM_WRONGPCRVAL", TPM_E_BASE + 24, |
| "The named PCR value does not match the current PCR value" }, |
| { "TPM_BAD_PARAM_SIZE", TPM_E_BASE + 25, |
| "The paramSize argument to the command has the incorrect value" }, |
| { "TPM_SHA_THREAD", TPM_E_BASE + 26, |
| "There is no existing SHA-1 thread" }, |
| { "TPM_SHA_ERROR", TPM_E_BASE + 27, |
| "The calculation is unable to proceed because the existing SHA-1\n\ |
| thread has already encountered an error" }, |
| { "TPM_FAILEDSELFTEST", TPM_E_BASE + 28, |
| "Self-test has failed and the TPM has shutdown" }, |
| { "TPM_AUTH2FAIL", TPM_E_BASE + 29, |
| "The authorization for the second key in a 2 key function\n\ |
| failed authorization" }, |
| { "TPM_BADTAG", TPM_E_BASE + 30, |
| "The tag value sent to for a command is invalid" }, |
| { "TPM_IOERROR", TPM_E_BASE + 31, |
| "An IO error occurred transmitting information to the TPM" }, |
| { "TPM_ENCRYPT_ERROR", TPM_E_BASE + 32, |
| "The encryption process had a problem" }, |
| { "TPM_DECRYPT_ERROR", TPM_E_BASE + 33, |
| "The decryption process did not complete" }, |
| { "TPM_INVALID_AUTHHANDLE", TPM_E_BASE + 34, |
| "An invalid handle was used" }, |
| { "TPM_NO_ENDORSEMENT", TPM_E_BASE + 35, |
| "The TPM does not a EK installed" }, |
| { "TPM_INVALID_KEYUSAGE", TPM_E_BASE + 36, |
| "The usage of a key is not allowed" }, |
| { "TPM_WRONG_ENTITYTYPE", TPM_E_BASE + 37, |
| "The submitted entity type is not allowed" }, |
| { "TPM_INVALID_POSTINIT", TPM_E_BASE + 38, |
| "The command was received in the wrong sequence relative to TPM_Init\n\ |
| and a subsequent TPM_Startup" }, |
| { "TPM_INAPPROPRIATE_SIG", TPM_E_BASE + 39, |
| "Signed data cannot include additional DER information" }, |
| { "TPM_BAD_KEY_PROPERTY", TPM_E_BASE + 40, |
| "The key properties in TPM_KEY_PARMs are not supported by this TPM" }, |
| { "TPM_BAD_MIGRATION", TPM_E_BASE + 41, |
| "The migration properties of this key are incorrect" }, |
| { "TPM_BAD_SCHEME", TPM_E_BASE + 42, |
| "The signature or encryption scheme for this key is incorrect or not\n\ |
| permitted in this situation" }, |
| { "TPM_BAD_DATASIZE", TPM_E_BASE + 43, |
| "The size of the data (or blob) parameter is bad or inconsistent\n\ |
| with the referenced key" }, |
| { "TPM_BAD_MODE", TPM_E_BASE + 44, |
| "A mode parameter is bad, such as capArea or subCapArea for\n\ |
| TPM_GetCapability, physicalPresence parameter for TPM_PhysicalPresence,\n\ |
| or migrationType for, TPM_CreateMigrationBlob" }, |
| { "TPM_BAD_PRESENCE", TPM_E_BASE + 45, |
| "Either the physicalPresence or physicalPresenceLock bits\n\ |
| have the wrong value" }, |
| { "TPM_BAD_VERSION", TPM_E_BASE + 46, |
| "The TPM cannot perform this version of the capability" }, |
| { "TPM_NO_WRAP_TRANSPORT", TPM_E_BASE + 47, |
| "The TPM does not allow for wrapped transport sessions" }, |
| { "TPM_AUDITFAIL_UNSUCCESSFUL", TPM_E_BASE + 48, |
| "TPM audit construction failed and the underlying command\n\ |
| was returning a failure code also" }, |
| { "TPM_AUDITFAIL_SUCCESSFUL", TPM_E_BASE + 49, |
| "TPM audit construction failed and the underlying command\n\ |
| was returning success" }, |
| { "TPM_NOTRESETABLE", TPM_E_BASE + 50, |
| "Attempt to reset a PCR register that does not have the resettable attribute" }, |
| { "TPM_NOTLOCAL", TPM_E_BASE + 51, |
| "Attempt to reset a PCR register that requires locality\n\ |
| and locality modifier not part of command transport" }, |
| { "TPM_BAD_TYPE", TPM_E_BASE + 52, |
| "Make identity blob not properly typed" }, |
| { "TPM_INVALID_RESOURCE", TPM_E_BASE + 53, |
| "When saving context identified resource type does not match actual resource" }, |
| { "TPM_NOTFIPS", TPM_E_BASE + 54, |
| "The TPM is attempting to execute a command only available when in FIPS mode" }, |
| { "TPM_INVALID_FAMILY", TPM_E_BASE + 55, |
| "The command is attempting to use an invalid family ID" }, |
| { "TPM_NO_NV_PERMISSION", TPM_E_BASE + 56, |
| "The permission to manipulate the NV storage is not available" }, |
| { "TPM_REQUIRES_SIGN", TPM_E_BASE + 57, |
| "The operation requires a signed command" }, |
| { "TPM_KEY_NOTSUPPORTED", TPM_E_BASE + 58, |
| "Wrong operation to load an NV key" }, |
| { "TPM_AUTH_CONFLICT", TPM_E_BASE + 59, |
| "NV_LoadKey blob requires both owner and blob authorization" }, |
| { "TPM_AREA_LOCKED", TPM_E_BASE + 60, |
| "The NV area is locked and not writable" }, |
| { "TPM_BAD_LOCALITY", TPM_E_BASE + 61, |
| "The locality is incorrect for the attempted operation" }, |
| { "TPM_READ_ONLY", TPM_E_BASE + 62, |
| "The NV area is read only and can't be written to" }, |
| { "TPM_PER_NOWRITE", TPM_E_BASE + 63, |
| "There is no protection on the write to the NV area" }, |
| { "TPM_FAMILYCOUNT", TPM_E_BASE + 64, |
| "The family count value does not match" }, |
| { "TPM_WRITE_LOCKED", TPM_E_BASE + 65, |
| "The NV area has already been written to" }, |
| { "TPM_BAD_ATTRIBUTES", TPM_E_BASE + 66, |
| "The NV area attributes conflict" }, |
| { "TPM_INVALID_STRUCTURE", TPM_E_BASE + 67, |
| "The structure tag and version are invalid or inconsistent" }, |
| { "TPM_KEY_OWNER_CONTROL", TPM_E_BASE + 68, |
| "The key is under control of the TPM Owner and can only be evicted\n\ |
| by the TPM Owner" }, |
| { "TPM_BAD_COUNTER", TPM_E_BASE + 69, |
| "The counter handle is incorrect" }, |
| { "TPM_NOT_FULLWRITE", TPM_E_BASE + 70, |
| "The write is not a complete write of the area" }, |
| { "TPM_CONTEXT_GAP", TPM_E_BASE + 71, |
| "The gap between saved context counts is too large" }, |
| { "TPM_MAXNVWRITES", TPM_E_BASE + 72, |
| "The maximum number of NV writes without an owner has been exceeded" }, |
| { "TPM_NOOPERATOR", TPM_E_BASE + 73, |
| "No operator AuthData value is set" }, |
| { "TPM_RESOURCEMISSING", TPM_E_BASE + 74, |
| "The resource pointed to by context is not loaded" }, |
| { "TPM_DELEGATE_LOCK", TPM_E_BASE + 75, |
| "The delegate administration is locked" }, |
| { "TPM_DELEGATE_FAMILY", TPM_E_BASE + 76, |
| "Attempt to manage a family other then the delegated family" }, |
| { "TPM_DELEGATE_ADMIN", TPM_E_BASE + 77, |
| "Delegation table management not enabled" }, |
| { "TPM_TRANSPORT_NOTEXCLUSIVE", TPM_E_BASE + 78, |
| "There was a command executed outside of an exclusive transport session" }, |
| { "TPM_OWNER_CONTROL", TPM_E_BASE + 79, |
| "Attempt to context save a owner evict controlled key" }, |
| { "TPM_DAA_RESOURCES", TPM_E_BASE + 80, |
| "The DAA command has no resources available to execute the command" }, |
| { "TPM_DAA_INPUT_DATA0", TPM_E_BASE + 81, |
| "The consistency check on DAA parameter inputData0 has failed" }, |
| { "TPM_DAA_INPUT_DATA1", TPM_E_BASE + 82, |
| "The consistency check on DAA parameter inputData1 has failed" }, |
| { "TPM_DAA_ISSUER_SETTINGS", TPM_E_BASE + 83, |
| "The consistency check on DAA_issuerSettings has failed" }, |
| { "TPM_DAA_TPM_SETTINGS", TPM_E_BASE + 84, |
| "The consistency check on DAA_tpmSpecific has failed" }, |
| { "TPM_DAA_STAGE", TPM_E_BASE + 85, |
| "The atomic process indicated by the submitted DAA command is not\n\ |
| the expected process" }, |
| { "TPM_DAA_ISSUER_VALIDITY", TPM_E_BASE + 86, |
| "The issuer's validity check has detected an inconsistency" }, |
| { "TPM_DAA_WRONG_W", TPM_E_BASE + 87, |
| "The consistency check on w has failed" }, |
| { "TPM_BAD_HANDLE", TPM_E_BASE + 88, |
| "The handle is incorrect" }, |
| { "TPM_BAD_DELEGATE", TPM_E_BASE + 89, |
| "Delegation is not correct" }, |
| { "TPM_BADCONTEXT", TPM_E_BASE + 90, |
| "The context blob is invalid" }, |
| { "TPM_TOOMANYCONTEXTS", TPM_E_BASE + 91, |
| "Too many contexts held by the TPM" }, |
| { "TPM_MA_TICKET_SIGNATURE", TPM_E_BASE + 92, |
| "Migration authority signature validation failure" }, |
| { "TPM_MA_DESTINATION", TPM_E_BASE + 93, |
| "Migration destination not authenticated" }, |
| { "TPM_MA_SOURCE", TPM_E_BASE + 94, |
| "Migration source incorrect" }, |
| { "TPM_MA_AUTHORITY", TPM_E_BASE + 95, |
| "Incorrect migration authority" }, |
| { "TPM_PERMANENTEK", TPM_E_BASE + 97, |
| "Attempt to revoke the EK and the EK is not revocable" }, |
| { "TPM_BAD_SIGNATURE", TPM_E_BASE + 98, |
| "Bad signature of CMK ticket" }, |
| { "TPM_NOCONTEXTSPACE", TPM_E_BASE + 99, |
| "There is no room in the context list for additional contexts" }, |
| { "TPM_RETRY", TPM_E_BASE + TPM_E_NON_FATAL, |
| "The TPM is too busy to respond to the command immediately, but\n\ |
| the command could be resubmitted at a later time. The TPM MAY\n\ |
| return TPM_RETRY for any command at any time" }, |
| { "TPM_NEEDS_SELFTEST", TPM_E_BASE + TPM_E_NON_FATAL + 1, |
| "TPM_ContinueSelfTest has not been run" }, |
| { "TPM_DOING_SELFTEST", TPM_E_BASE + TPM_E_NON_FATAL + 2, |
| "The TPM is currently executing the actions of TPM_ContinueSelfTest\n\ |
| because the ordinal required resources that have not been tested" }, |
| { "TPM_DEFEND_LOCK_RUNNING", TPM_E_BASE + TPM_E_NON_FATAL + 3, |
| "The TPM is defending against dictionary attacks and is in some\n\ |
| time-out period" }, |
| }; |
| |
| #endif /* TPM_ERROR_MESSAGES_H */ |