nb/intel/pineview: Put host bridge registers into its own file
Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical.
Change-Id: I12d6adb8f130599a33d71d7c9f71914ee7c9e8ef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/src/northbridge/intel/pineview/pineview.h b/src/northbridge/intel/pineview/pineview.h
index 7c41b4c..d557d22 100644
--- a/src/northbridge/intel/pineview/pineview.h
+++ b/src/northbridge/intel/pineview/pineview.h
@@ -19,55 +19,7 @@
/* Device 0:0.0 PCI configuration space (Host Bridge) */
#define HOST_BRIDGE PCI_DEV(0, 0, 0)
-#define EPBAR 0x40
-#define MCHBAR 0x48
-#define PCIEXBAR 0x60
-#define DMIBAR 0x68
-#define PMIOBAR 0x78
-
-#define GGC 0x52 /* GMCH Graphics Control */
-
-#define DEVEN 0x54 /* Device Enable */
-#define DEVEN_D0F0 (1 << 0)
-#define DEVEN_D1F0 (1 << 1)
-#define DEVEN_D2F0 (1 << 3)
-#define DEVEN_D2F1 (1 << 4)
-
-#ifndef BOARD_DEVEN
-#define BOARD_DEVEN ( DEVEN_D0F0 | DEVEN_D2F0 | DEVEN_D2F1 )
-#endif /* BOARD_DEVEN */
-
-#define PAM0 0x90
-#define PAM1 0x91
-#define PAM2 0x92
-#define PAM3 0x93
-#define PAM4 0x94
-#define PAM5 0x95
-#define PAM6 0x96
-
-#define LAC 0x97 /* Legacy Access Control */
-#define REMAPBASE 0x98
-#define REMAPLIMIT 0x9a
-#define SMRAM 0x9d /* System Management RAM Control */
-#define ESMRAMC 0x9e /* Extended System Management RAM Control */
-
-#define TOM 0xa0
-#define TOUUD 0xa2
-#define GBSM 0xa4
-#define BGSM 0xa8
-#define TSEG 0xac
-#define TOLUD 0xb0 /* Top of Low Used Memory */
-#define ERRSTS 0xc8
-#define ERRCMD 0xca
-#define SMICMD 0xcc
-#define SCICMD 0xce
-#define CGDIS 0xd8
-#define SKPAD 0xdc /* Scratchpad Data */
-#define CAPID0 0xe0
-#define DEV0T 0xf0
-#define MSLCK 0xf4
-#define MID0 0xf8
-#define DEBUP0 0xfc
+#include "hostbridge_regs.h"
/* Device 0:1.0 PCI configuration space (PCI Express) */